will be interpreted as a total amount of time to wait per client instead
of per disk.
+ connect_tries int
+ Default: 3. How many times the server will try a connection.
+
+ req_tries int
+ Default: 3. How many times the server will resend a REQ packet if it
+ doesn't get the ACK packet.
+
netusage int
Default: 300 Kbps. The maximum network bandwidth allocated to Amanda, in
Kbytes per second. See also the interface section.
the current file. Useful for sharing dumptypes, tapetypes and interface
definitions among several configurations.
+ debug_auth int
+ Default: 0. Debug level of the auth module
+
+ debug_event int
+ Default: 0. Debug level of the event module
+
+ debug_holding int
+ Default: 0. Debug level of the holdingdisk module
+
+ debug_protocol int
+ Default: 0. Debug level of the protocol module
+
+ debug_planner int
+ Default: 0. Debug level of the planner process
+
+ debug_driver int
+ Default: 0. Debug level of the driver process
+
+ debug_dumper int
+ Default: 0. Debug level of the dumper process
+
+ debug_chunker int
+ Default: 0. Debug level of the chunker process
+
+ debug_taper int
+ Default: 0. Debug level of the taper process
+
+ reserved-udp-port int,int
+ Default: --with-udpportrange or 512,1023. Reserved udp port that will be
+ used (bsd, bsdudp)
+
+ reserved-tcp-port int,int
+ Default: --with-low-tcpportrange or 512,1023. Reserved tcp port that will
+ be used (bsdtcp)
+
+ unreserved-tcp-port int,int
+ Default: --with-tcpportrange or 1025,65536. Unreserved tcp port that will
+ be used (bsd, bsdudp)
+
HOLDINGDISK SECTION
raised if Amanda was compiled with the configure option --with-
maxtapeblocksize=N set with "N" greater than 32 during configure.
+ readblocksize int
+ Default: (from configure --with-maxtapeblocksize). How much data will be
+ read in each tape record expressed in KiloBytes. Some hardware require a
+ value not too large, and some require it to be equal to the blocksize. It
+ is useful if you configured amanda with a big --with-maxtapeblocksize and
+ your hardware don't work with a value that big.
+
file-pad boolean
Default: true. If true, every record, including the last one in the file,
will have the same length. This matches the way Amanda wrote tapes prior