Hi Laura, Kim,

This is a request for quote on raw boards and partial turnkey assembly
of two new products, TeleLCO 1.0 and TeleFire 1.0. We're planning on
running these through 'kickstarter', so we'll set a minimum build
quantity, but the order could end up larger than that. We'd like to
get quotes for 10, 25, 50 for TeleLCO and 20, 50, 100 TeleFire to help
set the pricing in the campaign

Kim, like some of our other products, this one has a notch in one side
to allow a micro USB connector to overhang the board edge.  As a
result, these need to be tab-routed.  We have no discussed optimal
panelization for a board of this geometry before, so please let me
know what a good arrangement would be if we want to build these in
lots of 10 ish.  My latest FreeDFM run resulted in quotes 3956156 for
TeleLCO and 3956159 for TeleFire. We'll want to run these in standard
spec with the cheapest option which I think is 5 days.

Laura, the new BOM is attached, and the XYRS data is in the
telefire.xy and telelco.xy files in the zips.  As usual we will
provide some hard to find parts and want you to turnkey the rest.
We're quite cost sensitive for these, so whatever the cheapest
assembly turn should be fine.

From the standard data request for assembly quotes:

     Company Name:              Altus Metrum, LLC

     Contact Name:              Keith Packard

     Phone:                     503 245 6878

     Part Number:               TeleFire and TeleLCO

     Revision:                  1.0

     How many to assemble:      10, 25 or 50 TeleLCO
				20, 50 or 100 TeleFire

     PCB dimensions:		TeleLCO is 4.50  x 3.75
				TeleFire is 4.00 x 4.00.

     How parts acquired:        partial turnkey

				  We will provide J3 for TeleFire and
				  J5 for TeleLCO

     Parts both sides?:         no 
					all SMT is on one side, and 
					all TH parts are no-loads

     ROHS?:                     no

     ITAR?:                     no 

Assembly notes:

	None.

Please let me know if I've forgotten anything, and thanks in advance for
your help!

Keith