commit 0cd443d5e55b2c3b97ecf53389ff76bc4bc6018f Author: Keith Packard Date: Sun Sep 16 12:38:33 2012 -0700 Add release notes for version 1.1.1 Signed-off-by: Keith Packard commit cb48dd0b03b445437f751028e8383610b65b0a68 Author: Keith Packard Date: Sun Sep 16 02:39:25 2012 -0700 altos: Fix telemini sdcdb init file Set the driver source path for the debugger Signed-off-by: Keith Packard commit 3520bbf1ed6461d1ce7af001c529563a3cffa3c9 Author: Keith Packard Date: Sun Sep 16 00:58:20 2012 -0700 altosui: Gather Tm sensor data in Monitor Idle mode Tm is pretty much the same as TM for the analog sensors, it's just missing the accelerometr. Use the same code for constructing an AltosRecord for it Signed-off-by: Keith Packard commit 31f5a02654cbf172beed25f4c518dfb7be8c714e Author: Keith Packard Date: Fri Sep 14 16:56:04 2012 -0700 altos: Need to use 16-bit counts for ao_xmem functions Trying to use 8-bit counts is a nice optimization which fails when the count is larger than 255, as is the case with clearing the flash block in the AT45 driver. This bug resulted in the inability to erase flights on TeleMetrum v1.0 boards. Signed-off-by: Keith Packard commit b898cf0a2abf2b0478d5afc5aca030c6b4c8bd0b Author: Keith Packard Date: Fri Sep 14 12:59:31 2012 -0700 altosui: Show over-ground-distance in Descent tab Helps to know where the rocket might land. Signed-off-by: Keith Packard commit f36f73b2d02b72201683cf5795851034bbd6f28e Author: Keith Packard Date: Fri Sep 14 12:58:54 2012 -0700 altosui: Remove debugging from KML export Left in from testing the Eeprom export bug Signed-off-by: Keith Packard commit 97ab77d548964115e4b41ad5952194fcd1455c96 Author: Keith Packard Date: Fri Sep 14 11:13:02 2012 -0700 altosui: Fix Landed tab units And clean up the whole flight value reporting code base. It would be nice to create a separate class to make this easier; at present there's a bunch of customization embedded in how values are presented in each tab. Reported by: Bdale Garbee Signed-off-by: Keith Packard commit 43e646657502f6162fa02f37fd2bd5aa3e29a1a8 Author: Keith Packard Date: Fri Sep 14 11:08:57 2012 -0700 altoslib: Update GPS seen_values in AltosEepromIterable Otherwise, KML export won't ever get GPS data to write. Reported by: Bob Brown Signed-off-by: Keith Packard commit 7b6dd9105ba36aa11d6d0ee6e0823965b9beffb9 Author: Keith Packard Date: Fri Sep 14 11:08:19 2012 -0700 altoslib: Remove duplicate seen_ values in AltosEepromIterable These are defined in AltosRecord; duplicating them is not a good plan Signed-off-by: Keith Packard commit eefcfa94f360f8c5a7233370d4178525bccbb22f Author: Bdale Garbee Date: Thu Sep 13 16:13:42 2012 -0600 add note about checking doc copyright date and revision history to Releasing commit 2441090f26c3df66a6ce48d64e64384ce9e5ef82 Author: Keith Packard Date: Thu Sep 13 15:12:33 2012 -0700 doc: Add revision history for 1.1. Update copyright date Signed-off-by: Keith Packard commit 320d90c376dccfe1599505e3b485df8d46e34bb3 Merge: 9a7d643 2e6c6a6 Author: Bdale Garbee Date: Thu Sep 13 15:36:37 2012 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 2e6c6a6c15a7cff9f20b70a4cf58697da1302f01 Author: Keith Packard Date: Thu Sep 13 00:35:27 2012 -0700 doc: Document imperial units and groundstation configuration What it says on the tin. Signed-off-by: Keith Packard commit 9a7d6431777ce3377b788ddac6cb9fadd53c039c Merge: 2439f53 9728b20 Author: Bdale Garbee Date: Thu Sep 13 00:58:30 2012 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 9728b20a4ad9576ac1022dc9a5771f5a3eb92b3d Author: Keith Packard Date: Wed Sep 12 23:56:18 2012 -0700 altosui: Exit with an error status when file processing fails If the user provides any files on the command line, and if processing them fails in some way, exit immediately with an error indication. Signed-off-by: Keith Packard commit 0564f9b13d4e3050b0a45fc1c4f710ab2b1f9d81 Author: Keith Packard Date: Wed Sep 12 22:40:57 2012 -0700 altosui: Leave new_gps indication until gps value is used During replay, AltosState may not see a new GPS value as soon as it lands in the state field as additional records with the same timestamp may come in after the GPS record. Instead of resetting the new_gps indication when the new record is created, wait until the new_gps indication is seen by the AltosState update code and have that clear the new_gps indication. Signed-off-by: Keith Packard commit 7e237920abb582d7ceb3e1925b11a848575ac68a Author: Keith Packard Date: Wed Sep 12 21:32:25 2012 -0700 altosui: Stop downloading eeprom data on a block full of invalid data When no valid records are found within an eeprom block, we assume that no more data will be found within the entire storage area. Signed-off-by: Keith Packard commit 2439f53ea21c84f7c510dc191dde025ada24281f Author: Bdale Garbee Date: Wed Sep 12 21:50:25 2012 -0600 document workaround for 'make fat' not building altoslib commit 07d9ba938f2742da1bce5d8df55cbc236207a981 Author: Bdale Garbee Date: Wed Sep 12 19:50:07 2012 -0600 update Releasing for non-native versioning and builds on debian branch commit fe009534ce6846b6db96cac8f6c2d53ba8010d91 Merge: 69d42b2 8ee29fe Author: Bdale Garbee Date: Wed Sep 12 19:49:51 2012 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 8ee29fe48771dd22a0c5428761ee53a728495d11 Author: Keith Packard Date: Wed Sep 12 16:07:41 2012 -0700 altosui: Serialize data access in TD config code Setting the values was being done in the UI thread instead of the Serial thread, which left the serial thread with uninitialized values when it went to update the displayed value for the current frequency. All fixed now. Signed-off-by: Keith Packard commit 19e35de47157923670b1864ce7b04f8d82f3bdea Author: Keith Packard Date: Wed Sep 12 16:06:59 2012 -0700 altosui: Lock access to preferences data These are accessed by several different threads, so keep things sane by just holding locks across all access. Signed-off-by: Keith Packard commit 1b5340c2b75c500011355c4889da443c4b9c4891 Author: Keith Packard Date: Wed Sep 12 13:07:01 2012 -0700 altosui: Add multi-sized icons to all windows This lets the window system pick a better size for presentation Signed-off-by: Keith Packard commit 3e4fc0b3953655eb720372d9b4274cd4bca19556 Author: Tom Marble Date: Wed Sep 12 10:05:42 2012 -0500 Reference specific dependent jars in the AltosUI launchers commit f0f4f907042e12815284abe1b63ae2d4a5a2d598 Author: Keith Packard Date: Wed Sep 12 02:30:59 2012 -0700 doc: Mention changes to flight data download UI Signed-off-by: Keith Packard commit 42bbe15512533f2d958b8219a02fbd256593092a Author: Keith Packard Date: Wed Sep 12 02:26:32 2012 -0700 altosui: Initialize flight velocity to zero when reading eeprom files Otherwise, the integration of velocity will start at MISSING and get stranger. Fortunately, we know the initial velocity of the rocket when sitting on the pad. Signed-off-by: Keith Packard commit b3c3c6eabd6837f0e72acee3906c8f71c6f0030e Author: Keith Packard Date: Tue Sep 11 23:37:20 2012 -0700 altosui: Don't say a decimal point for distances in meters Useful for distances in miles, but not meters. Signed-off-by: Keith Packard commit 87f9a8923656f275f74cfb6c8c6a57bbe59e74f8 Author: Keith Packard Date: Tue Sep 11 23:36:26 2012 -0700 altosui: Initialize imperial units checkbox with correct value Use imperial units preference instead of serial debug preference. Cut & paste programming failure... Signed-off-by: Keith Packard commit 69d42b26223b45df4167aa3baafba100ad71baab Merge: 3e9078c 3fa5fbd Author: Bdale Garbee Date: Wed Sep 12 00:26:21 2012 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 3fa5fbdfd1ab257028f272fbc32759b39608ddaf Author: Keith Packard Date: Tue Sep 11 23:04:19 2012 -0700 Clean up Windows event handles on com port close This avoids having to wait for the receiver to timeout before we can open the same com port again. This patch also adds a bit more debugging -- it prints Windows error messages to stdout along with the file/line where the error was generated. Signed-off-by: Keith Packard commit 1a154ce0b9fc3ea360d6bc7e17d6debb2da94438 Author: Keith Packard Date: Tue Sep 11 22:03:17 2012 -0700 Include AltosLib.jar in windows install Otherwise, altosui doesn't do much. Signed-off-by: Keith Packard commit 3e9078cb1077e7ad0d845f10c2ad0a007df76d29 Author: Bdale Garbee Date: Tue Sep 11 22:17:22 2012 -0600 releasing 1.1 commit 4563624638884b7b2f16cd4d396c00690e045999 Merge: 11fbcf5 e5a55db Author: Tom Marble Date: Tue Sep 11 22:50:18 2012 -0500 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 11fbcf5e30e0cd09f2d6b448911d2ef62b7f29c7 Author: Tom Marble Date: Tue Sep 11 22:48:04 2012 -0500 Added the feature to AC to default --with-android to $ANDROID_SDK (if set) Fixed typos in altosui/Makefile.am (had removed JCOMMON, but it's from AC) Jenkins changes: - added android sdk - will now record artifacts: altoslib/AltosLib.jar,altosui/altosui.jar,**/*.apk commit e5a55dbf265354e7c94be3e2be53c2d5c8fba056 Author: Keith Packard Date: Tue Sep 11 15:53:36 2012 -0700 Use ft/s for imperial speeds Bob Brown thinks this unit will be more useful than mph Signed-off-by: Keith Packard commit 73d05650eae1d3958e02e9ffde2020a2438eccbb Author: Keith Packard Date: Tue Sep 11 15:30:45 2012 -0700 Add Version 1.1 release notes. Signed-off-by: Keith Packard commit 7ae3e4cea1cd180ff18b5293a67b4520cc8292be Author: Keith Packard Date: Tue Sep 11 01:00:05 2012 -0700 altosui: Imperial units for graphs too Just to be consistent Signed-off-by: Keith Packard commit 95268d681c9a6652d84db383f55a4fe8a4ac5173 Author: Tom Marble Date: Tue Sep 11 12:54:31 2012 -0500 Reverted package name to 'altosui' from 'AltosUI' Also added emacs backup regex (*~) to .gitignore commit 13c64f6fb5764c6a0f3520cf4e48a75d78e163db Author: Tom Marble Date: Tue Sep 11 12:44:24 2012 -0500 Add appropriate Java build deps as given from autoconf commit 8e506274a35eccacd2d4523faa08d279a201753f Merge: 0bc3ed5 1fc97dd Author: Tom Marble Date: Tue Sep 11 11:39:22 2012 -0500 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 0bc3ed53aa8972c7080d6335f609cd9d0df1c79d Author: Tom Marble Date: Tue Sep 11 11:37:14 2012 -0500 Use explicit build deps for altosui (avoids * wildcarding) commit 1fc97dd9875a7639533a34438c4c7c999412eb3a Merge: 8397d2b 4420d4a Author: Bdale Garbee Date: Tue Sep 11 10:35:04 2012 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 8397d2b041824ddf1cc0b82926f10da8aae3264f Author: Bdale Garbee Date: Tue Sep 11 10:34:00 2012 -0600 update Debian build-deps in preparation for 1.1 release commit 4420d4a9fc011ed970af506ef771dfb81580b666 Author: Keith Packard Date: Tue Sep 11 00:49:48 2012 -0700 Fix Latin-1 encoded copyright symbols in AltosDroid java code Otherwise, we get complaints when compiling these files. Signed-off-by: Keith Packard commit 708e7937cba52982b91244cf89bfbff46d346135 Author: Tom Marble Date: Mon Sep 10 16:54:27 2012 -0500 Changed package name from altosui to AltosUI commit c2ebebc4967043b16380b8ec8800862993005358 Author: Tom Marble Date: Mon Sep 10 14:50:37 2012 -0500 Test commit (comment) to confirm push works commit 67da878f740a387d0092631ad672e024d26e4192 Author: Keith Packard Date: Mon Sep 10 09:16:04 2012 -0700 altosui: Use units conversion functions everywhere. Provide a configuration option to select imperial units and use them everywhere Signed-off-by: Keith Packard commit 66a1e07efcac9324d33a1eca0dfb58a2724b667a Author: Keith Packard Date: Mon Sep 10 09:14:03 2012 -0700 altoslib: Add imperial units conversion support "Redneck" mode support Signed-off-by: Keith Packard commit 51836cedce41d8b36eac34c69370489162aaa2b5 Author: Keith Packard Date: Sun Sep 9 14:02:57 2012 -0700 Bump version to 1.0.9.7 Signed-off-by: Keith Packard commit e45c47c52f9cc9c43b81148e0e58fdedb3af1eb8 Author: Keith Packard Date: Sun Sep 9 14:01:21 2012 -0700 altos/telelco: Search for available firing nodes at boot time Query for available firing nodes, limiting device selections to those found. Signed-off-by: Keith Packard commit 77775711d414227b3ed97859d1b21ab1c689a724 Author: Keith Packard Date: Sun Sep 9 13:58:29 2012 -0700 altos/telefire: Add steady warble when the LCO arm switch is on And make debugging a run-time option too. Signed-off-by: Keith Packard commit f2933103be122414a9b1795b37003b7a2aa9f3d7 Author: Keith Packard Date: Sun Sep 9 13:57:16 2012 -0700 altos/stm: Fix basic time interval to 10ms -- was 10.1ms Counting from 0 to 100 takes 10.1ms, so count to 99 instead. Signed-off-by: Keith Packard commit 0339583996fc57a666f8d3007a0f4b1034039a73 Author: Keith Packard Date: Sun Sep 9 13:56:35 2012 -0700 altos/spiradio: Label LEDs so that the radio code can use them Mark which should be on for TX and which for RX Signed-off-by: Keith Packard commit 3fa71c497a5bf576974e70af06762f75734e6699 Author: Keith Packard Date: Sun Sep 9 13:50:56 2012 -0700 altos: Try to get remote cmac time closer to reality Record the time after the packet was sent, but before the return packet arrives to try and more closely approximate the time the packet arrived at the other end. Signed-off-by: Keith Packard commit 27ab744c6eec9243b7aa14161eec2fbf7003531e Author: Keith Packard Date: Sun Sep 9 13:46:23 2012 -0700 altos: Clean up flight data definitions These just shuffle the various definitions of data macros around to make the include files more sensible looking. Signed-off-by: Keith Packard commit ced6a020d6d94b1c63837a7ab5b0091b7b8ea3c9 Author: Keith Packard Date: Sun Sep 9 13:43:45 2012 -0700 altos: include ao_arch_funcs.h at the very end of ao.h Move it below the definition of the ms5607 init function Signed-off-by: Keith Packard commit e053da3e7cb5a4c9ebbffd245cb5d83932183b22 Author: Keith Packard Date: Sun Sep 9 13:11:57 2012 -0700 altos: Allow products without MS5607 The define for a missing MS5607 was wrong, so anything using the fancy multi-sensor data code would break without an MS5607 in place. Signed-off-by: Keith Packard commit bb5ab29b6744b382bb2f09486a7a6db7d12a3608 Author: Keith Packard Date: Sun Sep 9 13:10:07 2012 -0700 ao_tools/ao-send-telem: Only start real-time on valid states Check state to make sure it is < ao_flight_landed to keep invalid states from switching to real-time playback mode. Signed-off-by: Keith Packard commit 47d87872c11a63a435fe5b703a4ce33503790d96 Author: Keith Packard Date: Sun Sep 9 13:09:27 2012 -0700 altoslib: Add in a bunch of java files mising after Mike's cleanups Signed-off-by: Keith Packard commit e2b458a448106ba1ab207f0ea6824b56927d8547 Merge: 9682e9e 3fe9322 Author: Keith Packard Date: Sun Sep 9 13:03:47 2012 -0700 Merge remote-tracking branch 'mjb/altoslib_mjb' commit 9682e9e6fe730417a77b47795fbe1f06c9a51177 Author: Keith Packard Date: Sun Sep 9 12:29:32 2012 -0700 altosui: Use helper functions to access arrays in AltosLib class These deal with out-of-range values correctly, instead of causing exceptions that will just break stuff. Signed-off-by: Keith Packard commit d65d921b9b2340fa23d3b55b4ae755324d392303 Author: Keith Packard Date: Sun Sep 9 12:20:08 2012 -0700 altosui: Catch errors in state value when saving flight logs Use AltosLib.state_name() instead of directly accessing the state_to_string array so that any invalid state values are caught and replaced with 'invalid' instead of raising an exception. Signed-off-by: Keith Packard commit 3fe932206f40f4d6f83a4ef49e064109a7a3de92 Author: Mike Beattie Date: Fri Sep 7 18:19:43 2012 +1200 altoslib: move distinct classes to separate files. Signed-off-by: Mike Beattie commit da053875c12b25b627e83430c3a956a994b435d5 Author: Mike Beattie Date: Fri Sep 7 18:19:07 2012 +1200 altoslib: remove obsolete class Signed-off-by: Mike Beattie commit 218c73b5bd5bd5673dc6f259f62b39541c52d6ff Author: Mike Beattie Date: Fri Sep 7 18:11:13 2012 +1200 altoslib: move distinct classes to separate files Signed-off-by: Mike Beattie commit 42170d0e3a3b68a9d3db69714e043f7273a714fb Author: Mike Beattie Date: Fri Sep 7 18:10:21 2012 +1200 altoslib: remove duplicate AltosGPSQuery class Signed-off-by: Mike Beattie commit 82f798e7b1343a56203af2e89790f6de9ab9f98d Author: Mike Beattie Date: Fri Sep 7 18:09:37 2012 +1200 altoslib: remove duplicate AltosIdleMonitor class Signed-off-by: Mike Beattie commit 88667f7b7dff52eaf5e30f8f83fed0d7f767268d Author: Mike Beattie Date: Fri Sep 7 18:07:45 2012 +1200 altoslib: rename AltosIdleRecordTM.java to AltosGPSQuery.java Signed-off-by: Mike Beattie commit bbbe1846346b4ba61330f535a12b7a5029877ee6 Author: Mike Beattie Date: Fri Sep 7 17:53:20 2012 +1200 altoslib: remove dead code (if object creation fails, an exception will be thrown - not return null) Signed-off-by: Mike Beattie commit 02d31db3d3255568cc348a41aa37a461d63ffde2 Author: Mike Beattie Date: Fri Sep 7 17:52:27 2012 +1200 altoslib: resolve argument/variable ambiguity (and comment out set_flags() which had no corresponding variable anyway) Signed-off-by: Mike Beattie commit 639f3e5e5171769429eac9e2f17a7b315fd62135 Author: Mike Beattie Date: Fri Sep 7 17:39:25 2012 +1200 altoslib: comment out unused methods Signed-off-by: Mike Beattie commit 369c5e23ac6d65bab4b456ed86737576ac61102f Author: Mike Beattie Date: Fri Sep 7 17:35:29 2012 +1200 altoslib: access static variables via class, not instance Signed-off-by: Mike Beattie commit b02c17b26e028a6f3a46781211a86a18272da4d0 Author: Mike Beattie Date: Fri Sep 7 17:34:17 2012 +1200 altoslib: comment out un-used variables Signed-off-by: Mike Beattie commit 20bc23ddb90f8a6da1f7ea70f02cf3a038059d32 Author: Mike Beattie Date: Fri Sep 7 17:32:07 2012 +1200 altoslib: Remove un-needed imports Signed-off-by: Mike Beattie commit c5e98d2b226824f2012e5710ac4b1596b9f0bfb1 Author: Keith Packard Date: Thu Sep 6 18:07:33 2012 -0700 altos: Fix radio slave to run lights in the normal way These were left in a debug mode, toggling instead of flashing. Signed-off-by: Keith Packard commit 01820c3e95fe85d2bee648d41809f1a753f81020 Author: Keith Packard Date: Sat Sep 1 00:15:16 2012 -0500 Revert "first work on PWM input to TeleScience, 'p' command displays timer 1" PWM bits not suitable for master This reverts commit e93c6bcc799d76d4ff425815e2601a25e6796229. commit 3ccc4a13e3f76bec864d61b0cdfd57c76c6baadb Author: Keith Packard Date: Sat Sep 1 00:15:02 2012 -0500 Revert "Timer 3 working with slower clock and all 16 bits." PWM bits not suitable for master This reverts commit 49b1ff4c614d24977b33cd17b583acc87acff476. commit 8c743857525eff778d067068356dec486b9fefa2 Author: Keith Packard Date: Sat Sep 1 00:14:49 2012 -0500 Revert "ICP3 working" PWM bits not suitable for master This reverts commit 75d6aa6f798606f1a6c5a46542065dda81e63b2a. commit 294b1ec85a37e375a0ac70cbffc6398309d63a7f Author: Keith Packard Date: Sat Sep 1 00:14:27 2012 -0500 Revert "telescience: correctly calculating rate values with higher resolution" PWM bits not suitable for master This reverts commit ada6f2dfc045e77cb9499f20cdec1b4a54ef0db1. commit ec9e1186dce079a2f2b7be8050216ddb1bc1af66 Merge: 503eabd 6d31f8d Author: Keith Packard Date: Fri Aug 31 22:24:16 2012 -0500 Merge remote-tracking branch 'mjb/freq_menu' commit 503eabd0e351ecdffda1416b7d00f8ef1d6913c9 Author: Keith Packard Date: Fri Aug 31 22:19:40 2012 -0500 altos: Get mma655x driver limping along This appears to drive the chip correctly to see values from the accelerometer. Signed-off-by: Keith Packard commit 48a3e6e073e927e456ef4e456e512f6fb8e3b9ee Author: Keith Packard Date: Fri Aug 31 21:02:13 2012 -0500 altos: Fix mma665x pin assigment for mma655x It's on PE13-PE15, not PA5-PA7 Signed-off-by: Keith Packard commit f9af7819de086d9179c3a4d1df7c88ab67a7d7c7 Author: Keith Packard Date: Fri Aug 31 21:01:21 2012 -0500 altos: Add custom panic noise for self-test failures Make it easier to tell which component is failing self test Signed-off-by: Keith Packard commit 6d31f8d15ef4bf75ae039dd7b1a6a615d00eb215 Author: Mike Beattie Date: Fri Aug 31 17:53:53 2012 +1200 altoslib: add missing manufacturer parsing for AltosConfigData Signed-off-by: Mike Beattie commit 4e3ac2b624f68dd5a8f6dd7a33eb10cd78497964 Author: Mike Beattie Date: Fri Aug 31 17:42:22 2012 +1200 altosdroid: invert channel/freq ordering Matches Channel Selector in altosui Signed-off-by: Mike Beattie commit 80bc985f79e616e5327aed4f7acc9bca71b8db54 Author: Mike Beattie Date: Fri Aug 31 16:50:53 2012 +1200 altosdroid: also display channel numbers Signed-off-by: Mike Beattie commit b6a21856c68ca8cca93eb755285be1927acb91e7 Author: Mike Beattie Date: Fri Aug 31 16:39:10 2012 +1200 ao-send-telem: fix frequency set command Signed-off-by: Mike Beattie commit 543ecb530d6fdf188a746ac59b72544e69bad830 Author: Mike Beattie Date: Fri Aug 31 16:38:21 2012 +1200 altosdroid: complete frequency change dialog Also implement Service IPC to action request. Signed-off-by: Mike Beattie commit f1a9fff865e0b226a97ad5d6eaaac64bd5e5d410 Author: Keith Packard Date: Thu Aug 30 23:07:43 2012 -0500 altosdroid: Start a hacked-up frequency dialog Signed-off-by: Keith Packard commit 6d8858ca1899c8b64f107ebb45711efbb7b8d62a Author: Keith Packard Date: Thu Aug 30 16:30:04 2012 -0500 altos: another .gitignore file Signed-off-by: Keith Packard commit ab9d5bf13e6f1735a0463f4bcab13d65170b7015 Author: Keith Packard Date: Thu Aug 30 16:28:53 2012 -0500 altos: ao_cc_spi.h isn't necessary for telelco The SPI radio defines are in ao_radio_spi.h Signed-off-by: Keith Packard commit b635cb26ba54c8f5c6a958e0ab0bc4d34d33b635 Merge: 354c1fe a8ecf3a Author: Keith Packard Date: Thu Aug 30 16:24:38 2012 -0500 Merge remote-tracking branch 'mjb/master' commit 354c1fed7f06c2c45c661e7265c2ac4bc47e2750 Author: Keith Packard Date: Thu Aug 30 16:22:51 2012 -0500 altos: Add a bunch of .gitignore entries Clean up the git status output Signed-off-by: Keith Packard commit 2c59954fdf204f443d9bb28c4a66a30f925ef348 Author: Keith Packard Date: Thu Aug 30 16:16:52 2012 -0500 altos: Shuffle LCO functions around, add telelco first cut Pull LCO functions shared between LCO UI and command line into ao_lco_funcs.c. Import bits for telelco. Signed-off-by: Keith Packard commit 72d44d14aefcb754b871835aec8d265771357212 Author: Keith Packard Date: Thu Aug 30 16:14:57 2012 -0500 altos: Disable debug printfs and fix pad ignite time for telefire Signed-off-by: Keith Packard commit a8ecf3aa4e88d4c76643fb541fb1d5535a454aba Author: Mike Beattie Date: Thu Aug 30 21:08:41 2012 +1200 altosdroid: Implement voice just like altosui Signed-off-by: Mike Beattie commit 2e6af70c87e7cc62a92b09bbbde745a31d83b5eb Author: Mike Beattie Date: Thu Aug 30 21:08:06 2012 +1200 altosdroid: Move bluetooth check to first task Signed-off-by: Mike Beattie commit 519887571cee2840024c5c8f4b7f0e5c352d3323 Author: Mike Beattie Date: Thu Aug 30 13:23:29 2012 +1200 altosdroid: add rssi/serial/flight, and re-work UI ordering Signed-off-by: Mike Beattie commit 14022b002d2201fb3ca28292d976c90e2d9a15a2 Author: Mike Beattie Date: Thu Aug 30 13:23:04 2012 +1200 altosdroid: rename ambiguous TextView name Signed-off-by: Mike Beattie commit 91606c89828e60d8cf9a5ea4ff75b951d6fc042a Author: Mike Beattie Date: Thu Aug 30 13:21:38 2012 +1200 altosdroid: formatting/whitespace, correct ids Signed-off-by: Mike Beattie commit 2137a112b4217d84041f749b8aa5eb8f4d330ba0 Author: Mike Beattie Date: Thu Aug 30 13:20:10 2012 +1200 altosdroid: rework lat/lon to more common format Signed-off-by: Mike Beattie commit c32325af6605e78c1d1147d466f3ea12ce94124a Author: Mike Beattie Date: Thu Aug 30 13:19:41 2012 +1200 altosdroid: rename azimuth/altitude to elevation/height respectively. (Matches altoslib, altosui, altos) Signed-off-by: Mike Beattie commit 8ffa4f9a474026f5a6523b26919a78565e0ed74c Author: Mike Beattie Date: Thu Aug 30 13:13:20 2012 +1200 altosdroid: move units into code, to match altosui Signed-off-by: Mike Beattie commit 583458772746317b98fced907ec780edff465888 Merge: aea10c1 17b6ffb Author: Keith Packard Date: Wed Aug 29 11:29:24 2012 -0700 Merge remote-tracking branch 'mjb/master' Pull in Mike's fancy new AltosDroid bits commit aea10c107dff2643677a9c8d1fc41e14f4a66049 Author: Keith Packard Date: Wed Aug 29 11:25:36 2012 -0700 altos: spiradio debug serial is port 1, not port 0 The SPI link uses port 0; it seems like the having the two try to share the same wires is a bad plan. Signed-off-by: Keith Packard commit 3e7e8e21f2bb823cb6e74c73d0feddbc3a891107 Author: Keith Packard Date: Wed Aug 29 11:23:13 2012 -0700 altos: SPI radio - use 1->0 for 'done' and 0->1 for 'ready' This changes how the SPI radio protocol uses the interrupt line. Instead of a pulse indicating operation done, this now uses a 0 value for done and a 1 value for ready. The key distinction is that the master can tell when the slave is waiting for the next command instead of hoping that it got done 'soon enough'. Signed-off-by: Keith Packard commit 1b6ed262460ee75fb5bb684d13d19c26c7ea750b Author: Keith Packard Date: Wed Aug 29 11:22:02 2012 -0700 altos: fix ao_pad debug output for query command Igniter status is an array these days. Signed-off-by: Keith Packard commit 442f1bfc89528103e2c28f768c954b956e39afc5 Author: Keith Packard Date: Wed Aug 29 11:21:09 2012 -0700 altos: Use updated pad protocol for lco commands Stop using the older single-channel protocol and switch to the new multi-channel protocol Signed-off-by: Keith Packard commit 7f64e62356bcfcd6ba8a88b09251793481bcd56c Author: Keith Packard Date: Wed Aug 29 11:19:17 2012 -0700 altos: Note changes to configured AES key for SPI radio convenience Keep a sequence number to mark when the AES key is changed so that the radio code can avoid sending the key before every CMAC radio operation. Signed-off-by: Keith Packard commit 1a7d2faf76a46271532102e217c2dd5515e38b72 Author: Keith Packard Date: Wed Aug 29 11:16:42 2012 -0700 altos: Wait for IN dma complete on slave SPI send SPI send double buffered, so the DMA completes one byte too early. Use the recv DMA to know when the SPI transfer is complete. Signed-off-by: Keith Packard commit 17b6ffb6c090112367eac944494f0fa58da453c7 Author: Mike Beattie Date: Thu Aug 30 01:01:06 2012 +1200 altosdroid: initial attempt at a UI. Signed-off-by: Mike Beattie commit 98f65994ee547feb8cca63ff4ed0fefd3fb2d37d Author: Keith Packard Date: Tue Aug 28 23:05:02 2012 -0700 altos: Oops. forgot ao_data.c Signed-off-by: Keith Packard commit 3a3982ceb721910c6a4f75badebb62baa6c6568e Author: Keith Packard Date: Tue Aug 28 22:43:10 2012 -0700 altos: Add spiradio Makefile git add doesn't add Makefile by default. Signed-off-by: Keith Packard commit fc9841ee5e92318471b6bec09b7075a788ab8872 Author: Keith Packard Date: Tue Aug 28 18:13:02 2012 -0700 altos: Mostly working SPI radio link This includes long delays to avoid overrunning the cc1111 input, otherwise it works pretty well. The delays mean that we can't capture the reply to a cmac command though, so more work is needed. Signed-off-by: Keith Packard commit 27a879b4069ccedf8bbe39d7dbecf45000f29d8c Author: Keith Packard Date: Tue Aug 28 18:12:27 2012 -0700 altos: Include the radio_cmac debug commands in telefire Just temporary debugging Signed-off-by: Keith Packard commit eb1a9a8c3f3d3993d5986925bc4ad112c2bbc119 Author: Keith Packard Date: Tue Aug 28 18:10:34 2012 -0700 altos: Explicitly erase memory in STM eeprom driver. This seems to make the STM32L152 happier Signed-off-by: Keith Packard commit 3fe5a70d9ac2114ee554813b1dbb3019a3e4aff7 Author: Keith Packard Date: Tue Aug 28 18:08:59 2012 -0700 altos: Track protocol changes to ao_pad debug messages Make the debug output build again. Signed-off-by: Keith Packard commit 18b5021e99c1eef32d2d85f619c84e89cecae7a7 Author: Keith Packard Date: Tue Aug 28 18:07:55 2012 -0700 altos: Stop providing debug commands in seven-segment driver The radio_cmac debug commands use the same letter, and this code works now... Signed-off-by: Keith Packard commit 78cd26eec77adda23ef1b5ca2d91027f1e059868 Author: Keith Packard Date: Tue Aug 28 18:07:05 2012 -0700 altos: Move radio_cmac test funcs from ao_lco_cmd.c to new file These are useful in the firing node for testing as well, so move them to be shared. Signed-off-by: Keith Packard commit f2d919a2147025daa332957cda6d91959e4731ab Author: Keith Packard Date: Tue Aug 28 18:05:10 2012 -0700 altos: When sharing radio DMA for AES, use it for in instead of out We look at the out_done value, but not the in_done value; if we use the radio DMA for out, we would have to use ao_radio_dma_done to check for completion. This way, we can ignore that value and use the existing ao_aes_dma_out_done value. Signed-off-by: Keith Packard commit 31b42b99edbb976534ac432c07e218f13d1f5f9b Author: Keith Packard Date: Tue Aug 28 18:03:52 2012 -0700 altos: Fix ao_delay function and move from per-chip code to ao_task.c ao_delay hasn't been chip-specific for a long time, and it had a bug in not calling ao_clear_alarm. Signed-off-by: Keith Packard commit ac5d053e6d766d243b7a425ae19779810c350125 Author: Keith Packard Date: Tue Aug 28 18:02:25 2012 -0700 ao-stmload: Always round up load amount to 4 byte boundary The flashing code doesn't deal with partial writes. Signed-off-by: Keith Packard commit 68df2b1173e82d48f7857ad2e9325e6a9cbbedfd Author: Keith Packard Date: Mon Aug 27 22:45:47 2012 -0700 altos: Enable STM SYSCFG when routing EXTI The EXTI routing information is in the syscfg unit, so that needs to be powered up or writes to its registers will be lost. Signed-off-by: Keith Packard commit c677f26852b70bcbb303382c306ce06664fde028 Author: Keith Packard Date: Mon Aug 27 22:45:20 2012 -0700 altos: No need to initialize EXTI priorities at startup time They all get set to the correct value when enabled. Signed-off-by: Keith Packard commit 5ed88fb72c3e3ecf3333c700d838667db71cfbdc Merge: adbe64c 621d093 Author: Bdale Garbee Date: Tue Aug 28 23:39:53 2012 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos Conflicts: debian/control commit adbe64c5a9402b7c5075a444a12629131b663877 Author: Bdale Garbee Date: Tue Aug 28 23:37:00 2012 -0600 libelf-dev added to build deps commit cb8f01745c9e8f258f96358b46e1caf17d6b0c9f Author: Mike Beattie Date: Tue Aug 28 23:20:04 2012 +1200 altosdroid: update Makefile.am for source file changes. Signed-off-by: Mike Beattie commit c220369953d351f49a5f45bfb5e317859d3a9843 Author: Mike Beattie Date: Tue Aug 28 22:26:12 2012 +1200 altosdroid: Add Dumper class for testing Signed-off-by: Mike Beattie commit 6c985c2b0433a08add3bbf55fdb30102157b4ede Author: Mike Beattie Date: Tue Aug 28 22:10:26 2012 +1200 altosdroid: add timer to stop service * Stops when no UI clients, and no bluetooth connection remains Signed-off-by: Mike Beattie commit 781bdb6c15b7dd3cc2280b08a2f47ce0f92cf53f Author: Mike Beattie Date: Tue Aug 28 22:09:34 2012 +1200 altosdroid: do service start/bind/unbind in start/stop, not create/destroy. Signed-off-by: Mike Beattie commit ea5fe9e95a888d623329d17d048ee360ea114ad1 Author: Mike Beattie Date: Tue Aug 28 22:08:49 2012 +1200 altosdroid: move methods around Signed-off-by: Mike Beattie commit c6d667a6ac0decfde5bc8a180b14774e9942dd0c Author: Mike Beattie Date: Tue Aug 28 22:08:19 2012 +1200 altosdroid: tidy up old messages Signed-off-by: Mike Beattie commit 5c7370dcd7a65c81a3c903a71167e07cfcbade53 Author: Mike Beattie Date: Tue Aug 28 22:07:39 2012 +1200 altosdroid: stop sending device name, just send config data * Kinda complicated, but ultimately more sensible * Just send the config data as an arg to MSG_CONNECTED * keep retrying connection till we actually get config data Signed-off-by: Mike Beattie commit 5ce8c63850dbc6462d7c41ce917e0e06672ec0ab Author: Mike Beattie Date: Tue Aug 28 22:00:14 2012 +1200 altosdroid: whitespace Signed-off-by: Mike Beattie commit df7b74909c3794b7b2397275e7fce9226cb99489 Author: Mike Beattie Date: Tue Aug 28 21:59:40 2012 +1200 altosdroid: override add_reply() to add android based debugging Signed-off-by: Mike Beattie commit 9d0f187f06c411f0d82e13ee4f2faea789ed9e79 Author: Mike Beattie Date: Tue Aug 28 21:59:15 2012 +1200 altosdroid: more logical name for connection_lost() method. Signed-off-by: Mike Beattie commit 7664ecc0003151d3f05537f17914df2bf48e4275 Author: Mike Beattie Date: Tue Aug 28 21:58:47 2012 +1200 altosdroid: rework ConnectThread * Start input_thread after connection, otherwise it's painful to kill on connect failure. Signed-off-by: Mike Beattie commit 502b24eb2c9c76e4e2bdcc79be0b71a869488b37 Author: Mike Beattie Date: Tue Aug 28 21:55:40 2012 +1200 altosdroid: fix a connection retry having a null pointer Signed-off-by: Mike Beattie commit c7bef83fd553987f83c0bf7ff37ef941872564fe Author: Mike Beattie Date: Tue Aug 28 21:54:05 2012 +1200 altosdroid: fix double call of stopAltosBluetooth() Signed-off-by: Mike Beattie commit 150a726e125aa7d181c00348ddd1791fd84164e5 Author: Mike Beattie Date: Tue Aug 28 21:53:01 2012 +1200 altosdroid: Miscellaneous comments/debug/etc cleanup Signed-off-by: Mike Beattie commit 162c640d382b9f823573578fe97584adc94cd9b6 Author: Mike Beattie Date: Tue Aug 28 17:37:45 2012 +1200 altosdroid: miscellaneous cleanup * Copyright info * whitespace * comments * unused imports Signed-off-by: Mike Beattie commit ae03d8e87985b9f746e9e22b2394a0a5b4f39f1c Author: Mike Beattie Date: Tue Aug 28 17:36:41 2012 +1200 altosdroid: Add passing of Device Config at connect Signed-off-by: Mike Beattie commit 03563c765d8b0ab3689c91b2b533c68e11650577 Author: Mike Beattie Date: Tue Aug 28 17:35:11 2012 +1200 altosdroid: Add new "TelemetryReader" class to handle Telemetry * Add MSG_TELEMETRY messages to both AltosDroid and TelemetryService to handle passing of AltosState object all the way back to the UI. * Remove linkedblockinglist from TelemetryService * (MSG_TELEMETRY is a rename of MSG_INCOMING_TELEM in AltosDroid) * commented code in case statement inside AltosDroind - won't work with the objects it is currently passed. * Add new "MSG_DEVCONFIG" message to AltosDroid - allows TelemetryService to pass information about the connected device back to the UI. Signed-off-by: Mike Beattie commit ed653a1e6dc8884cb171af1406fd0999ef125a4d Author: Mike Beattie Date: Tue Aug 28 17:26:09 2012 +1200 altosdroid: create connected() method Signed-off-by: Mike Beattie commit 621d0930244f25165d2ac5da596dcc87e253b965 Author: Keith Packard Date: Mon Aug 27 13:52:11 2012 -0700 altos: Add spiradio product Implements the SPI radio protocol Signed-off-by: Keith Packard commit 61d094f281431e9f11f806454981da8e1245fb5c Author: Keith Packard Date: Mon Aug 27 13:51:53 2012 -0700 altos: sdcdb rc file for telefire Signed-off-by: Keith Packard commit c31d07fb35a5b4d283facf649bed3f0f9802d1fc Author: Keith Packard Date: Mon Aug 27 13:49:07 2012 -0700 altos: Add SPI linked radio API Forward the necessary radio functions over the SPI link Signed-off-by: Keith Packard commit 0f3483f93137f41a61f3fcbe06afcaffb1b9e17b Author: Keith Packard Date: Mon Aug 27 13:47:16 2012 -0700 altos: Clean up radio APIs Move api to ao_radio_cmac.h include file. Expose ao_radio_test as standard API. Signed-off-by: Keith Packard commit 85fd7ab504a9fac1de90bbe7df8ea477a092c2b0 Author: Keith Packard Date: Mon Aug 27 13:45:56 2012 -0700 altos: Build telelco and spiradio when possible Signed-off-by: Keith Packard commit 467acda662de8b96e7d0df729c2e4761686b82a1 Author: Keith Packard Date: Mon Aug 27 13:44:35 2012 -0700 altos: Expose a signed version of the tick count Useful when doing time comparisons. Signed-off-by: Keith Packard commit e7443bf350afe273e87a884915ea1e7662630cd3 Author: Keith Packard Date: Mon Aug 27 13:42:38 2012 -0700 altos: Specify the LCD duty cycle for stm-demo This is the demo for the large 7-segment displays and needs static drive Signed-off-by: Keith Packard commit 708d49e498bbdc59bb5af9bf4ca5fcea5689547a Author: Keith Packard Date: Mon Aug 27 13:41:13 2012 -0700 altos: Test multiple quadrature devices. Export quadrature count. Signed-off-by: Keith Packard commit 8bfe8157cd9fe488d1ee961f200ffa0866322f2c Author: Keith Packard Date: Mon Aug 27 13:38:44 2012 -0700 altos: Seven segment display driver Hex numbers and the decimal point. Signed-off-by: Keith Packard commit 28c3923b6180e24a77aecc7162bb2852cec7d770 Author: Keith Packard Date: Mon Aug 27 13:37:14 2012 -0700 altos: More SPI slave changes for cc1111 driver Don't enable DMA in the other direction when doing slave transfers. Signed-off-by: Keith Packard commit a27b9b5c36cf748e415ba210c8d8ae72d8227a98 Author: Keith Packard Date: Mon Aug 27 13:35:39 2012 -0700 altos: Add SPI slave get/put macros to cc1111 Theese don't try to drive the chip select line Signed-off-by: Keith Packard commit 304909b7534768bfc8da62954effb37ba86806ea Author: Keith Packard Date: Mon Aug 27 13:34:12 2012 -0700 altos: Provide interface for STM LCD driver. This provides a simple function interface for driving the LCD segments in the STM chip. It also uses the update complete interrupt to block LCD users during flush. Signed-off-by: Keith Packard commit c1168f40223ca09df23215f2e2fc445a8a03aea9 Author: Keith Packard Date: Mon Aug 27 13:32:41 2012 -0700 altos: Rename drivers/ao_lco to drivers/ao_lco_cmd These contain command line functions for testing the cmac and lco features. Now that there's a telelco-specific ao_lco interface file, it's useful to have both for testing. Signed-off-by: Keith Packard commit fa8668931cbbc1506560222f2db7e427b514a351 Author: Mike Beattie Date: Mon Aug 27 19:41:47 2012 +1200 altosdroid: Let a freshly connected client know what the device name is! Signed-off-by: Mike Beattie commit 9a41508d92f95012a37bb75603e6e48a2c405204 Author: Mike Beattie Date: Mon Aug 27 19:41:29 2012 +1200 altosdroid: Add Connected/Connect_failed messages Signed-off-by: Mike Beattie commit e121ec3ae634f41979717281a28af5e4a38e8f3a Author: Mike Beattie Date: Mon Aug 27 19:40:30 2012 +1200 altosdroid: don't need keys for Bundles anymore Signed-off-by: Mike Beattie commit afac4d6c82916eea67ac838cd22806bd73db00a9 Author: Mike Beattie Date: Mon Aug 27 19:39:53 2012 +1200 altosdroid: Toast() requests don't need Bundles Signed-off-by: Mike Beattie commit 18c380120fe37a4bdc8f295e86c6c4413d1aa037 Author: Mike Beattie Date: Mon Aug 27 19:39:09 2012 +1200 altosdroid: really don't need to store a local copy of the device name Signed-off-by: Mike Beattie commit 6441437d3b0e848b225a3d6c78ab00e2590c6988 Author: Mike Beattie Date: Mon Aug 27 19:37:16 2012 +1200 altosdroid: remove complexity around message passing * Don't really need to use bundles * TelemetryService: Use a local variable to store the bluetooth device object Signed-off-by: Mike Beattie commit f89e7de20374141b367205aa517a08ee203bfaf3 Author: Keith Packard Date: Sun Aug 26 09:53:16 2012 -0700 altos: Trigger sample complete when all data are ready This has each sensor mark a bit in the current data record which is then sent for processing when all of the data are present. Signed-off-by: Keith Packard commit dec1481786ad54e22634e32109b5ed6e5483938e Author: Keith Packard Date: Sun Aug 26 09:52:27 2012 -0700 altos: Shrink STM stack size 512 bytes should be enough for anybody. Signed-off-by: Keith Packard commit d13d0fbfcb0fd6d8a1af46f6270a968d746c830e Author: Keith Packard Date: Sun Aug 26 09:49:34 2012 -0700 altos: Make ao_cur_task_index track ao_cur_task in ao_yield This keeps the two main task references (index and pointer) in agreement during task switching, avoiding an extra assignment at the end of the task switching loop. Signed-off-by: Keith Packard commit 1c9baa88d6cd931c66d453674322908eb267ba4c Author: Keith Packard Date: Sun Aug 26 09:47:05 2012 -0700 altos: Make 'pad' driver useful with telefire v0.1 This reports correct status bits over the radio and to the LEDs for all four channels, and also makes the firing test command control all four relays. Signed-off-by: Keith Packard commit ea4db73328e865fd658b573da256ca0004c69c61 Author: Keith Packard Date: Sun Aug 26 09:45:03 2012 -0700 altos: Add debug command for 74hc597 driver This dumps the current state of the 74hc597 chip. Note that this shows that the 74hc597 driver doesn't work, and that the circuit used in telefire v0.1 can't work. Signed-off-by: Keith Packard commit 89f1a685a02c7808cf03853aa9a5ee50c6baf49e Author: Keith Packard Date: Sun Aug 26 09:43:34 2012 -0700 altos: Allow sharing of radio DMA with aes engine otherwise, telefire doesn't have enough DMA channels. Signed-off-by: Keith Packard commit 58d2b70575f3616a056d2356a737b3be15ed3d66 Author: Mike Beattie Date: Sun Aug 26 23:38:33 2012 +1200 altosdroid: begin adding TextToSpeech support. Signed-off-by: Mike Beattie commit 11896d22b7bc6e34e3f6109d28f8b6a2d37e6c25 Author: Mike Beattie Date: Sun Aug 26 23:38:10 2012 +1200 altosdroid: whitespace cleanup Signed-off-by: Mike Beattie commit f8211fee3c8a5de6925eadca2679441801ac793e Author: Mike Beattie Date: Sun Aug 26 23:37:58 2012 +1200 altosdroid: Send device name and connected state back to TelemetryService Signed-off-by: Mike Beattie commit 8fdde3e74c6dce35f90f4575ce6914516fc56aba Author: Mike Beattie Date: Sun Aug 26 23:37:33 2012 +1200 altosdroid: re-work connect/thread handling in AltosBluetooth * Much more resilient to failure * handles multiple blocked threads better Signed-off-by: Mike Beattie commit dba71db022ae4a9f7c5fd128b90caa73aa4e99da Author: Mike Beattie Date: Sun Aug 26 23:34:59 2012 +1200 altosdroid: remove old commented code Signed-off-by: Mike Beattie commit 38827db5131a2681243649c76bfd1d7d9801f9ba Author: Mike Beattie Date: Sun Aug 26 23:34:45 2012 +1200 altosdroid: add handling when restarting BT. delay start after stop. Signed-off-by: Mike Beattie commit 30d107882b62edf4e6d48923209da6ce3dabeef7 Author: Mike Beattie Date: Sun Aug 26 23:34:28 2012 +1200 altosdroid: set devicename and pass on to clients Signed-off-by: Mike Beattie commit d95b84b56c63002788939b93b6ce949d921a4892 Author: Mike Beattie Date: Sun Aug 26 23:30:45 2012 +1200 altosdroid: Send current state to client on connect Signed-off-by: Mike Beattie commit cf94a86f37284b53e89b13a7eeb871db647c61ba Author: Mike Beattie Date: Sun Aug 26 23:30:00 2012 +1200 altosdroid: add missing break; (just in case!) Signed-off-by: Mike Beattie commit 24fe48f66f94c99b8197a612afe6f98e980e9796 Author: Mike Beattie Date: Sun Aug 26 23:29:25 2012 +1200 altosdroid: debugging statements Signed-off-by: Mike Beattie commit 2ef1723091b0c491ef445474844376185ca4102b Author: Mike Beattie Date: Sun Aug 26 23:28:59 2012 +1200 altosdroid: forgot change to IncomingHandler constructor call. oops! Signed-off-by: Mike Beattie commit d40f96fcc961cfbf6af67fc84591d2660d065ca0 Author: Mike Beattie Date: Sun Aug 26 23:28:26 2012 +1200 altosdroid: Strings and Layout changes Signed-off-by: Mike Beattie commit 3d6fc5fe462531e05ca4b9be1a421490e067a28b Author: Mike Beattie Date: Sun Aug 26 23:26:58 2012 +1200 altosdroid: lots of debugging statements Signed-off-by: Mike Beattie commit 31bffa435cec2098c7ab5c42c829ba6e1578b5d2 Author: Mike Beattie Date: Sun Aug 26 23:24:13 2012 +1200 altosdroid: need sendMessageToClients() for setState().. oops! Signed-off-by: Mike Beattie commit a9ec3c96288b7ea4e40586321a0a98edf0c8fee5 Author: Mike Beattie Date: Sun Aug 26 23:23:33 2012 +1200 altosdroid: Need access to handler inside AltosBluetooth * Also move add_monitor() call Signed-off-by: Mike Beattie commit d7173e814c49826f39bba1ff6b024819c555860c Author: Mike Beattie Date: Sun Aug 26 23:20:01 2012 +1200 altosdroid: reflect change in message name Signed-off-by: Mike Beattie commit 215d78f06093bd8a8b08a85cae0f1f34aee2a6ec Author: Mike Beattie Date: Sun Aug 26 23:19:06 2012 +1200 altosdroid: begin adding state support Signed-off-by: Mike Beattie commit fe6680dd3b4c31b3d4edc3f06a142f02bcb879df Author: Mike Beattie Date: Sun Aug 26 23:16:49 2012 +1200 altosdroid: init device variable... oops! Signed-off-by: Mike Beattie commit 2c5513c51b187ad26a59b193b401f38c35141d27 Author: Mike Beattie Date: Sun Aug 26 23:16:04 2012 +1200 altosdroid: Rename Connect message, add connected message Signed-off-by: Mike Beattie commit a6373e84393312ed0fbf22285c704819c2011588 Author: Mike Beattie Date: Sun Aug 26 23:14:09 2012 +1200 altosdroid: init telem blocking list.. oops! Signed-off-by: Mike Beattie commit 21359f600354e8ee840e839e61ef97d30f3586fc Author: Mike Beattie Date: Sun Aug 26 23:13:33 2012 +1200 altosdroid: disable NotificationManager stuff for now Signed-off-by: Mike Beattie commit 54baecc208a40606e3242b2cbd5e66567053646f Author: Mike Beattie Date: Sun Aug 26 23:12:48 2012 +1200 altosdroid: Convert handlers to use weakreferences * Also renamed bluetooth start/stop methods Signed-off-by: Mike Beattie commit bf7def1a7b93867dfe16fe6499ee028747634c41 Author: Mike Beattie Date: Sun Aug 26 15:28:58 2012 +1200 altosdroid: Remove Binder import from TelemetryService Signed-off-by: Mike Beattie commit 5f4c47389a3d0d10d659a2e00fc74a150b5fed88 Author: Mike Beattie Date: Sun Aug 26 15:28:36 2012 +1200 altosdroid: Add State constants for future usage Signed-off-by: Mike Beattie commit 6ffcc82d8d18d3f05d4f5881e50dda298b43c114 Author: Mike Beattie Date: Sun Aug 26 15:28:09 2012 +1200 altosdroid: begin adding IPC to TelemetryService * And add imports for LinkedBlockingQueue... oops! Signed-off-by: Mike Beattie commit a33333b97e810f50db36f345aab71a3200feccc3 Author: Mike Beattie Date: Sun Aug 26 15:24:19 2012 +1200 altosdroid: remove old Binder from TelemetryService Signed-off-by: Mike Beattie commit b69796991c1da6baf245349fcc4392668b9b5570 Author: Mike Beattie Date: Sun Aug 26 15:23:17 2012 +1200 altosdroid: begin adding IPC to main thread Signed-off-by: Mike Beattie commit bcd53483ccf4bbb2f163a011faae6d19a7bbed0d Author: Mike Beattie Date: Sun Aug 26 15:22:23 2012 +1200 altosdroid: Add TBT initialisation to AltosBluetooth Signed-off-by: Mike Beattie commit ef29a197ce3318404f37e8a0b24d235e8b024a1f Author: Mike Beattie Date: Sun Aug 26 15:21:57 2012 +1200 altosdroid: Add debugging statements to AltosBluetooth Signed-off-by: Mike Beattie commit fb8cd14cca61ca59b95c23e71505607b4509d4ed Author: Mike Beattie Date: Sun Aug 26 15:21:36 2012 +1200 altosdroid: Add input thread for reading from TBT Signed-off-by: Mike Beattie commit 5ce132b3366cd120499fcbe22b5fbe96d21b8584 Author: Mike Beattie Date: Sun Aug 26 15:20:42 2012 +1200 altosdroid: Move constructor for AltosBluetooth Signed-off-by: Mike Beattie commit b59e7d0b201290f2cb0fd494ef28c1402e11ba3b Author: Mike Beattie Date: Sun Aug 26 15:18:44 2012 +1200 altosdroid: clean up stub functions in AltosBluetooth.java Signed-off-by: Mike Beattie commit d184638be79dafd6fb43df21040eb52402f54ea5 Author: Mike Beattie Date: Sun Aug 26 15:11:12 2012 +1200 altosdroid: AltosBluetooth.java * clean up variables/comments Signed-off-by: Mike Beattie commit bad155538c4630c62ade80afd20830aad37c287e Author: Mike Beattie Date: Sun Aug 26 15:10:15 2012 +1200 altosdroid: AltosBluetooth.java * Clean up imports * Convert from reflection to using Well Known UUID for SPP. * clean up local variables * Add debug conditionals to logging * remove references to socket type Signed-off-by: Mike Beattie commit c9689a3ef65ea9da5a7009834add789737ffb6a9 Author: Mike Beattie Date: Sun Aug 26 15:03:54 2012 +1200 altosdroid: Clean up imports in TelemetryService * Begin adding AltosLib usage Signed-off-by: Mike Beattie commit ffdfc08c317f503e30604d058749b24c3ca7bafa Author: Mike Beattie Date: Sun Aug 26 15:00:23 2012 +1200 altosdroid: Add service start/bind/unbind to AltosDroid Signed-off-by: Mike Beattie commit 95a34caa8343997bcf7d8969ee8ae3124efcb573 Author: Mike Beattie Date: Sun Aug 26 14:57:04 2012 +1200 altosdroid: Remove AltosLib import from main thread commit cfe93315fc0e4b01a95b8e59f24aca96b5a66daf Author: Mike Beattie Date: Sun Aug 26 14:55:19 2012 +1200 altosdroid: whitespace Signed-off-by: Mike Beattie commit 3f3da6626ef41b2cab116d6299d2a89cbf7718a9 Author: Mike Beattie Date: Sun Aug 26 14:54:54 2012 +1200 altosdroid: Re-locate TextView initialisation Signed-off-by: Mike Beattie commit 917f519a4e876087590a3a260fbbccf4c0ac3e31 Author: Mike Beattie Date: Sun Aug 26 14:54:06 2012 +1200 altosdroid: remove UI components/imports no longer used Signed-off-by: Mike Beattie commit 80bf63702175322053f2b38c4fff56b653ab7c70 Author: Mike Beattie Date: Sun Aug 26 14:52:30 2012 +1200 altosdroid: excise BluetoothChatService example code Signed-off-by: Mike Beattie commit 372840b4ebfd3da3cd713b6bc6a8ffc8cd6b6b8c Author: Mike Beattie Date: Sun Aug 26 14:48:48 2012 +1200 altosdroid: remove TelemetryService activities service start/stop will be handled by AltosDroid/itself now. Signed-off-by: Mike Beattie commit 24503eb330bf887f5c76afe2aaa9c9f2ce177460 Author: Mike Beattie Date: Sun Aug 26 14:44:09 2012 +1200 altosdroid: whitespace (spaces to tabs) (part2) Signed-off-by: Mike Beattie commit 7aab6e6b6e361455a7515fe6db7b0e9a6e4c786c Author: Mike Beattie Date: Sun Aug 26 14:29:36 2012 +1200 altosdroid: whitespace (spaces to tabs) (part1) Signed-off-by: Mike Beattie commit 0f3597389977f86a8c1bdff1b7f46107c43ef306 Author: Mike Beattie Date: Sun Aug 26 12:41:24 2012 +1200 altosdroid: Update copyrights Signed-off-by: Mike Beattie commit 7ecb429fe4682faf209452b1738ff3c8096fc5d5 Author: Keith Packard Date: Fri Aug 24 00:46:55 2012 -0700 altos: Configure telefire SPI and LEDs correctly This places the telefire SPI bus on USART1 option 2 and marks the various LED functions with symbolic names. Signed-off-by: Keith Packard commit 310c1d0bf83448eb12e5d64ac09a4279c25fd258 Author: Keith Packard Date: Fri Aug 24 00:44:35 2012 -0700 altos: telelaunch doesn't need ao_radio_cmac_init This function was used to initialize the LCO functions, which were moved to ao_lco.c a few commits back, so ao_radio_cmac_init doesn't even exist anymore. Signed-off-by: Keith Packard commit 6581fa1641882198c870c2f7b1340794b9d47f29 Author: Keith Packard Date: Fri Aug 24 00:42:32 2012 -0700 altos: Get ao_pad.c working on telefire v0.1 Monitor all four channels, allow any channel to be fired. Turn on power LED at startup time. Signed-off-by: Keith Packard commit 83e0d4352041b3964ea7a133b0f67da9ebaa1c77 Author: Keith Packard Date: Fri Aug 24 00:40:27 2012 -0700 altos: Split out LCO functions from ao_radio_cmac.c to ao_lco.c These functions are not used in the telelaunch or telefire nodes, so don't force them to be included. Signed-off-by: Keith Packard commit c64999c39d6d9242f98bdc9312436c3333115bfd Author: Keith Packard Date: Fri Aug 24 00:39:46 2012 -0700 altos: Have radio_cmac turn on LEDs as appropriate Use AO_LED_RX and AO_LED_TX defines if present to control LEDs during radio operations. Signed-off-by: Keith Packard commit a8e9906513227600599da12b268ff5f807ae98c7 Author: Keith Packard Date: Fri Aug 24 00:34:55 2012 -0700 altos: Add 'ao_led_set_mask' in the PCA9922 driver This lets a subset of the LEDs be controlled independent of other LED settings. Signed-off-by: Keith Packard commit 50b58d703b8b48005a3ca9ad4e3603d6f7ac1430 Author: Keith Packard Date: Fri Aug 24 00:33:38 2012 -0700 altos: Make cc1111 SPI pins configurable Allow either USART in any configuration. Still only supports one SPI bus though. Signed-off-by: Keith Packard commit 7a0ed0ff4192060854d69e640de2c30105eb2f62 Author: Keith Packard Date: Fri Aug 24 00:27:13 2012 -0700 altos: Disable telefire 'pad' listener when testing radio Ensures that the radio testing won't block waiting for a firing mode packet to arrive. Signed-off-by: Keith Packard commit 659c0cd3ee4b9581c12ac2cd1b4162bf07a921ce Author: Keith Packard Date: Sun Aug 19 10:02:16 2012 -0700 altosui: Check for JRE 1.7 in Windows installer altosui runs fine with version 1.7 (on Linux at least), so allow that version to satisfy the java check instead of requiring the user to down-grade to 1.6 Signed-off-by: Keith Packard commit ab1279cc6a683595631d7ac8bed7b36e0c8a691c Author: Keith Packard Date: Sat Aug 18 22:51:47 2012 -0700 Here's the button driver and event queue logic These were neglected in the commit which was supposed to include them Signed-off-by: Keith Packard commit 93db8febda03d9a02c5c1ccdc6ad44eaf00a433b Author: Keith Packard Date: Sat Aug 18 21:26:34 2012 -0700 altos: Add MMA655X driver Just debug code at this point, will complete on real hardware Signed-off-by: Keith Packard commit 8457ca81adc9d62a7ffe56a7c0c36f2fcadaa682 Author: Keith Packard Date: Sat Aug 18 21:25:34 2012 -0700 altos/cc1111: Document SPI bus pin options Just a comment in the source code about which pins each option selects. Signed-off-by: Keith Packard commit f46d94ca5c969c88dd307d1b684d6fafa2157020 Author: Keith Packard Date: Sat Aug 18 21:24:16 2012 -0700 altos: Use split SPI bus for MS5607 sensor Leave CS low while releasing the SPI bus when waiting for conversion complete -- other SPI bus users will use another set of pins. Signed-off-by: Keith Packard commit a1a48aa9ee0bf7fa6720b34c0f544485caea7cac Author: Keith Packard Date: Sat Aug 18 21:21:58 2012 -0700 altos: Allow STM SPI bus on multiple pin sets This allows multiple STM pin groups to be used for each SPI bus. Useful for the MS5607 sensor which signals conversion complete on the MISO line. Signed-off-by: Keith Packard commit 00abbbb79de67dc95176fe48b23ce3e8614e8d3a Author: Mike Beattie Date: Wed Aug 8 07:07:49 2012 +1200 ao-send-telem: make --realtime work (add "break;" to the case statement for options) Signed-off-by: Mike Beattie commit 9456332fc16269270a2e9b7ef0b54523800cfe27 Merge: bd02349 4d4ad34 Author: Mike Beattie Date: Wed Aug 8 06:49:15 2012 +1200 Merge branch 'master' of git://git.gag.com/fw/altos commit 4d4ad34aec0c75c66162b992f1e52947e4685730 Merge: c7f2285 8e4ebd1 Author: Keith Packard Date: Tue Aug 7 11:48:20 2012 -0700 Merge remote-tracking branch 'mjb/master' commit bd02349111ae0f39b320e6a10a330051ddc39fdf Merge: 8e4ebd1 c7f2285 Author: Mike Beattie Date: Wed Aug 8 06:46:56 2012 +1200 Merge branch 'master' of git://git.gag.com/fw/altos commit 8e4ebd1f6eb928b5cb7bcda4ed88851aa9e61bdf Author: Mike Beattie Date: Wed Aug 8 06:45:03 2012 +1200 Add ao-send-telem to .gitignore Signed-off-by: Mike Beattie commit c7f228503870c44dfd278ede8b0980dbac73d3c7 Author: Keith Packard Date: Tue Aug 7 11:32:16 2012 -0700 altos: Fix .sdcdbrc file for telebt-v0.1 Signed-off-by: Keith Packard commit c58f3d1a373b20fac3f51037008bcc40955f1348 Author: Keith Packard Date: Tue Aug 7 11:30:47 2012 -0700 altos: Oops. Serial 1 stdin was busted by typo A typo in the symbol used to enable stdin wakeups from serial1 caused the input to pend until some other wakeup occurred. This also makes the serial1 hw flow control pin selects in config 2 work right, although those aren't used by any current product Signed-off-by: Keith Packard commit 46f87373bc8c28442273ee4f8da3a352223150f5 Author: Keith Packard Date: Mon Aug 6 22:53:52 2012 -0700 altos: Add button driver and event queue With this, a single task can wait for any button or quadrature input device. Signed-off-by: Keith Packard commit 11046bc89b3ce6386f1005fc8476b08f54d6f5fb Author: Keith Packard Date: Mon Aug 6 21:54:58 2012 -0700 altos: Support multiple quadrature encoders. Signed-off-by: Keith Packard commit 5f7e61c749b02ed16e368502062e39b0471e9257 Author: Keith Packard Date: Mon Aug 6 20:20:32 2012 -0700 altos: Fix up quadrature driver Mostly works now, should work reliably with a bit of input filtering. Signed-off-by: Keith Packard commit ab379493dbe9923db8e458d2f4e0344df17d331c Author: Keith Packard Date: Mon Aug 6 19:35:02 2012 -0700 Signed-off-by: Keith Packard altos: Test quadrature driver commit b0b52ca73bc836336ecc70247a9ed1dd633920d9 Author: Keith Packard Date: Mon Aug 6 19:34:34 2012 -0700 altos: Add quadrature driver Signed-off-by: Keith Packard commit 6171892fa32e8a662a494ec6ba28a82fddc68589 Author: Keith Packard Date: Mon Aug 6 19:33:44 2012 -0700 altos: Add ao_gpio_get and ao_exti_set_mode Needed to support general GPIO interrupts Signed-off-by: Keith Packard commit de701d5a234cd21930cf92c9cabebb0e230da9b5 Author: Keith Packard Date: Sun Aug 5 14:58:40 2012 -0700 altos: Build ao_kalman.h from cc1111 subdirs as needed Signed-off-by: Keith Packard commit fc9aed1ef3485d259722c9b89e19969e0afe257c Author: Mike Beattie Date: Sun Feb 26 22:30:09 2012 +1300 Adjust service to be persistent. * Run as a foreground service -> high priority * Notification set to display as "Ongoing". Changed logo to be in colour at keithp's request. Greyscale logos still present as *_g.png Signed-off-by: Mike Beattie commit b80d1f4e8a2df3ace64468a38a815a4f982aa179 Author: Bdale Garbee Date: Sun Jun 10 20:04:24 2012 -0600 move from Debian packaged sdcc to new cc1111 package forked from 2.9.0-5 commit 0f82021186565fda10df7893b95deae4a1f32778 Author: Keith Packard Date: Sun Aug 5 12:17:25 2012 -0700 src/cc1111: Enable SPI slave mode This is untested... Signed-off-by: Keith Packard commit 39594fdb3e30a1a25dd894c217e3d9d773bab972 Author: Keith Packard Date: Sun Aug 5 12:16:25 2012 -0700 src/cc1111: Allow serial0 without serial1 The ao_serial_speed structure is needed by serial0 too. Signed-off-by: Keith Packard commit 2610b316eb939c1532061646b05207fcd54d984f Author: Keith Packard Date: Sun Aug 5 12:15:36 2012 -0700 src/cc1111: Add ao_gpio_set macro Allows general GPIO-using code to run on cc1111 Signed-off-by: Keith Packard commit 82a37d70e3cacf792c1aa18f8c0d2a19d6f321ed Author: Keith Packard Date: Sat Aug 4 22:58:48 2012 -0700 altosui: Move 'implements Runnable' from AltosSerial to AltosLink AltosLink is the class providing the 'run' method, after all... Signed-off-by: Keith Packard commit af34baf5dc587bee4cffa699ef383f85dde8c7cd Author: Mike Beattie Date: Thu Aug 2 23:38:26 2012 +1200 Reduce size of textview. Signed-off-by: Mike Beattie commit 359d7353fd7b7d4d537db04c5e89724502333ff8 Author: Mike Beattie Date: Thu Aug 2 22:09:24 2012 +1200 AltosDroid: Begin re-working Bluetooth code * Move to using explicit 'magic' UUID, rather than java reflection * Re-work UI to make it more useful for testing * Use Insecure RFCOMM only, and remove code that differentiates. Signed-off-by: Mike Beattie commit c5304ac976dd44344a0b70ae3622e1f2d112a147 Author: Mike Beattie Date: Thu Aug 2 21:20:23 2012 +1200 Fix min/target SDK versions Signed-off-by: Mike Beattie commit 7481d06bebc2dc1473f451971d8b744c9da4e726 Merge: 599e28b c56dead Author: Mike Beattie Date: Thu Aug 2 21:18:15 2012 +1200 Merge branch 'master' of ssh://mjb@git.ethernal.org/~/git/altos commit 599e28b2242c79bdd0960ef16e580e51a2fa3795 Author: Mike Beattie Date: Thu Aug 2 21:16:54 2012 +1200 Re-work external lib support for newer Android SDK * Remove older *.properties methods of locating lib dir * clean up Eclipse classpath file * adjust Makefile.am to link AltosLib.jar into libs/ Signed-off-by: Mike Beattie commit c56dead72f65e7468017656347dba531ab2ca480 Author: Mike Beattie Date: Tue Jul 31 20:05:35 2012 +1200 Ignore autogenerated file: altosui/Info.plist Signed-off-by: Mike Beattie commit fb79f8fb358f8df25674336cd558fc3998cb7d9e Author: Mike Beattie Date: Tue Jul 31 20:04:34 2012 +1200 Don't build ao-stmload if stlink is not available. Signed-off-by: Mike Beattie commit 2e7e304e67bc1e094282c8668fa8cccf09f9c9b4 Author: Keith Packard Date: Sun Jul 29 19:48:08 2012 -0700 altos: Add driver for STM internal flash Signed-off-by: Keith Packard commit 843fcab46d633e5bb6959286adeb68e41a4c30a3 Author: Keith Packard Date: Sun Jul 29 19:44:56 2012 -0700 altos: Add telefire-v0.1 Signed-off-by: Keith Packard commit e4d244eefa4c779cd9c8a91389bf998c54705b72 Author: Keith Packard Date: Sun Jul 29 19:42:53 2012 -0700 altos: Add software AES implementation This is untested Signed-off-by: Keith Packard commit 21e39811bd234c6f66ab7644864fcc1b8c316998 Author: Keith Packard Date: Sun Jul 29 19:36:50 2012 -0700 altos/cc1111: Fix serial 0 option 2 pins definitions tx/rx are 4/5, rts/cts are 2/3 Signed-off-by: Keith Packard commit 743dca54012758d3ae54312d542b34afa88495cd Author: Keith Packard Date: Sun Jul 29 19:35:15 2012 -0700 altosui: Remove duplicate values from info table. Add altitude No need to have state/call/serial/flight data, those are all in the header. Having altitude makes Monitor Idle slightly more useful. Signed-off-by: Keith Packard commit 0bf21399d3d47d58410df4c6ce89fc20fcd42c89 Author: Keith Packard Date: Sun Jul 29 19:34:00 2012 -0700 altosui: Handle Monitor Idle errors better Deal with missing data by checking for MISSING in more places. Handle serial communication failures during send by reporting back from libaltos. Signed-off-by: Keith Packard commit 59588ba34159b27c02e1a886b46497ecfa0cf4d3 Author: Keith Packard Date: Sun Jul 29 16:22:23 2012 -0700 Add ability to re-play telemetry through TeleDongle This adds a new command to TeleDongle to send arbitrary data, and then creates a new tool, 'ao-send-telem' that replays existing telemetry files through TeleDongle. Signed-off-by: Keith Packard commit 52e920bc7a98edf5c6f2ad0bd59d581011dcd5c9 Author: Keith Packard Date: Sun Jul 22 15:18:27 2012 -0700 altos: Move ao_radio_cmac.c to core (it doesn't depend on hardware) Signed-off-by: Keith Packard commit 233ab58df8ac8e1fdeab8d4c2f6c8c9d3f6e7be1 Author: Keith Packard Date: Sun Jul 22 11:53:44 2012 -0700 altosui: Move AltosIgnite.java to altoslib To be shared with altosdroid eventually Signed-off-by: Keith Packard commit 38f66a31174dd367e39d717c527f555add60a9d4 Author: Keith Packard Date: Fri Jul 20 12:04:17 2012 -0700 tools: Use pkgconfig to find stlink for ao-stmload Signed-off-by: Keith Packard commit e033a72d3f420e18ed24354c7dfc7e1317a03fb6 Author: Keith Packard Date: Fri Jul 20 11:08:22 2012 -0700 Add stlink pinout Signed-off-by: Keith Packard commit 15ebd9c75aa57572040e3b1ee41e6f3eb8cf92ee Author: Keith Packard Date: Thu Jul 19 09:46:20 2012 -0700 altosui: Delay starting KML output for flight and GPS coords Don't start outputing KML data until the telem record containing flight number and GPS coordinates are present. Signed-off-by: Keith Packard commit ada6f2dfc045e77cb9499f20cdec1b4a54ef0db1 Author: Robert Garbee Date: Wed Jul 18 18:41:00 2012 -0600 telescience: correctly calculating rate values with higher resolution commit e2b472bbb2418fc13be42dbc7c52beb88479c46d Merge: 75d6aa6 b242f27 Author: Robert Garbee Date: Wed Jul 18 14:25:27 2012 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 75d6aa6f798606f1a6c5a46542065dda81e63b2a Author: Robert Garbee Date: Wed Jul 18 14:24:05 2012 -0600 ICP3 working commit 49b1ff4c614d24977b33cd17b583acc87acff476 Author: Robert Garbee Date: Wed Jul 18 13:41:27 2012 -0600 Timer 3 working with slower clock and all 16 bits. commit b242f2756a8d9419a9bdba890b9e6b73560bdc19 Author: Keith Packard Date: Wed Jul 18 00:03:54 2012 -0700 altosdroid: Start adding an AltosLink subclass for android Will talks over bluetooth while providing an AltosLink APi Signed-off-by: Keith Packard commit f164e48cbeff521d45737794e2046a08322951d6 Author: Keith Packard Date: Wed Jul 18 00:01:51 2012 -0700 altosui: Make scan UI handle incremental telem data The new telem format doesn't send everything in each telem packet, so we need to handle updating information incrementally in the scan results. This involved clearing old scan data when switching frequencies and then updating existing entries with new data as it arrives. Signed-off-by: Keith Packard commit a698cd68968fc0be5f96b1729cdea2f65d2ccbf6 Author: Keith Packard Date: Tue Jul 17 23:59:13 2012 -0700 altos: Toggling telemetry monitoring would replay the telem queue Using the 'm' command to turn telem off and back on would end up going around the whole telemetry queue replaying everything there as the wait loop would exit when disabling monitoring even if the ring was empty. Signed-off-by: Keith Packard commit 9fd5e3c28fb0fd6da8641e7dd18b9912866d1b75 Author: Keith Packard Date: Tue Jul 17 21:06:07 2012 -0700 altos: With debug cables disconnected, CC1120 seems happy at +16dBm Let's see how it goes... Signed-off-by: Keith Packard commit 700818c8ff0518e79bff2f0e80b2cc3cb3b48bf0 Author: Keith Packard Date: Tue Jul 17 21:04:58 2012 -0700 altosui: Accept variations in spacing for igniter status reply Megametrum uses different white space; just deal with it here. Signed-off-by: Keith Packard commit f6921c9040b1f1fc4408d163532b0695a3611195 Author: Keith Packard Date: Tue Jul 17 21:04:23 2012 -0700 altoslib: Move idle monitor managing code to altoslib More stuff to be shared (potentially) Signed-off-by: Keith Packard commit b4be63627e146c7c868b5b3468d34880a561cfba Author: Keith Packard Date: Tue Jul 17 20:44:55 2012 -0700 altos: Megametrum ADC values are 12 bits, discard low 4 for telemetry We've only got space for 8 bits for the ADC values for pyro channels, discard the low 4 bits instead of the low 8 bits. Signed-off-by: Keith Packard commit 97c1cfee929a35dd1596dc02ce519b80132f3c5c Author: Keith Packard Date: Tue Jul 17 20:43:31 2012 -0700 altoslib: Don't use MISSING values in max computations Early telemetry state may be missing critical data, don't use MISSING values in computing max ranges. Signed-off-by: Keith Packard commit 99b7eaf8d1b312443b842d078fb8464032b3a39b Author: Keith Packard Date: Tue Jul 17 20:42:42 2012 -0700 altoslib: Fix MM conversion functions Pressure is already reported in Pa, no need to convert that. Voltage divider computations were backwards. Signed-off-by: Keith Packard commit e93c6bcc799d76d4ff425815e2601a25e6796229 Author: Robert Garbee Date: Tue Jul 17 13:23:48 2012 -0600 first work on PWM input to TeleScience, 'p' command displays timer 1 commit a5d873d47b3b16ca32559b4de668bf07b25eddb0 Author: Keith Packard Date: Tue Jul 17 01:24:52 2012 -0700 altos: Place STM config values at fixed addresses for re-use Just like cc1111, stick the serial number and radio calibration values at known fixed addresses so that when re-flashing the board, we can go find the existing values. Signed-off-by: Keith Packard commit 20877ae9de8bb5d3a29e2a96024e53afbd396f55 Author: Keith Packard Date: Tue Jul 17 01:18:45 2012 -0700 Add ao-stmload tool This loads an ELF image through the STlink programming interface using the stlink utility library Signed-off-by: Keith Packard commit eda636c5f309b85282b4142118ee65673d28d137 Author: Keith Packard Date: Mon Jul 16 15:36:20 2012 -0700 altosui: Skip unknown data when parsing ADC for idle monitoring This resolves an infinite loop when talking to megametrum. Signed-off-by: Keith Packard commit 52196975c447851f14619213c1de5101d334eebc Author: Keith Packard Date: Mon Jul 16 15:35:11 2012 -0700 altosui: Move serial datastream parser to altoslib instead of having it in altosui Signed-off-by: Keith Packard commit 0edb5616a70fd480317acc99ec3c28c662aa8556 Author: Keith Packard Date: Mon Jul 16 15:34:01 2012 -0700 altos: megametrum depends on ao_companion.h Signed-off-by: Keith Packard commit 5860f75677ee20fcf35ab89a6b62f3e14a1c32f5 Author: Keith Packard Date: Mon Jul 16 15:32:26 2012 -0700 altos: Enable pyro channel control in telepyro This should make the board actually work now. Signed-off-by: Keith Packard commit 3ce645a79b54e22d7835c6e390a22a5ad501a339 Author: Keith Packard Date: Mon Jul 16 15:30:29 2012 -0700 altos: Add manual firing command for extra pyro channels In parallel with the existing igniter commands, this tests the programmable pyro channels Signed-off-by: Keith Packard commit 6581eefbdbd8d3e94f615bdf11652a000d131c8e Author: Keith Packard Date: Mon Jul 16 15:27:58 2012 -0700 altos: Use 'HAS_ORIENT' to enable orientation selection in pyro code Don't expose orientation options when no orientation data is available Signed-off-by: Keith Packard commit 1887ca3d7d4a0259686f8c1e68d1e47c47b4ab84 Author: Keith Packard Date: Mon Jul 16 15:25:47 2012 -0700 altos: Pass flight dynamics to companion boards Necessary for TelePyro Signed-off-by: Keith Packard commit 90507d4f7ef77b0870a032b1d9809898c2924721 Author: Keith Packard Date: Mon Jul 16 15:24:21 2012 -0700 altos: Make ao_tick_count visible Necessary to fetch it when interrupts are already disabled as we can't call ao_time then. Signed-off-by: Keith Packard commit 184e2ff4790974733df57facdeeb96bfe692ab54 Author: Keith Packard Date: Mon Jul 16 15:21:21 2012 -0700 altos: Remove some debug code from avr ADC driver Signed-off-by: Keith Packard commit e7ca3a7849b3cbbb38143d35fe86972290bd4e61 Author: Keith Packard Date: Mon Jul 16 15:18:12 2012 -0700 altos: Make sure telepyro ao_product.h is built before .o files Signed-off-by: Keith Packard commit 4de789331098abc24abcb9390a35aef889a41784 Author: Keith Packard Date: Mon Jul 16 14:47:53 2012 -0700 altos: Make storage addresses datatype configurable No sense using 32 bits for tiny hardware Signed-off-by: Keith Packard commit 84d5e00d417af4924594908d19346bb965089cdd Author: Keith Packard Date: Mon Jul 16 14:44:40 2012 -0700 src: Add driver for AVR internal eeprom. Use for telepyro config. Signed-off-by: Keith Packard commit 2a23030031c31267fc4f14accd9220f285c03b61 Author: Keith Packard Date: Mon Jul 16 14:40:49 2012 -0700 altos: No space for pyro help on TP v0.1 AVR doesn't have enough ram to hold the help messages, and we can't use them in flash. Signed-off-by: Keith Packard commit 366217e86a4c353012b5102322ee6927f7b27a21 Author: Keith Packard Date: Mon Jul 16 14:39:05 2012 -0700 altos: Remove unused 'func' from ao_config_set Signed-off-by: Keith Packard commit 81b7b58c9df01847fa47747deeff8c3c91304ad1 Author: Keith Packard Date: Mon Jul 16 14:37:58 2012 -0700 altos/avr: Remove debugging command from USB driver Signed-off-by: Keith Packard commit 42a51becf4b76f23dbd4f5f80f8879ce696aa543 Author: Keith Packard Date: Mon Jul 16 14:36:51 2012 -0700 altos/avr: Remove debugging printf in avr stdio startup Signed-off-by: Keith Packard commit 0cfd22baa6af44e053428c30c1a95cf5551b68af Author: Keith Packard Date: Sat Jul 14 02:44:17 2012 -0700 src: Add explicit 'pin' argument to ao_enable_output This lets the cc1111 use the atomic bit operation instead of a mask, which is immune to interrupt issues as well as being a shorter code sequence. Signed-off-by: Keith Packard commit 37032e4b0cbac4c823e3dd18e60ad8900e9ceff1 Author: Keith Packard Date: Sat Jul 14 01:29:50 2012 -0700 altos/megametrum: Support the four additional pyro channels These use the new pyro code to allow for some flexibility in programming. Signed-off-by: Keith Packard commit 82b50fc1b7f2c6af7264fbad2c35508abc15e81e Author: Keith Packard Date: Sat Jul 14 01:28:55 2012 -0700 altos/stm: Expose ao_gpio_set which sets a specific GPIO pin Will need versions for other architectures Signed-off-by: Keith Packard commit 726e0f2c547b6bae1f1e640e2c1155c0b9631a9b Author: Keith Packard Date: Sat Jul 14 01:28:31 2012 -0700 stm: running out of memory in MM -- reduce stack to 668 bytes Signed-off-by: Keith Packard commit d90587535676f9492f0fde6b974353158104ef88 Author: Keith Packard Date: Sat Jul 14 01:26:38 2012 -0700 altos: Add arbitrary pyro channel support Programmed by specifying a conjunction of flight conditions that trigger the igniter to fire. Signed-off-by: Keith Packard commit 09633cac697e37d770b2b666ab20cab30628484f Author: Keith Packard Date: Sat Jul 14 01:24:14 2012 -0700 altos/stm: Force STM stack to start at the top of RAM Using a fixed size means crashing if there's not enough space for that, or wasting memory if there's too much. Signed-off-by: Keith Packard commit b5f6d4e5251a825395c93916afa3af659c678498 Author: Keith Packard Date: Wed Jul 11 19:15:32 2012 -0700 altosui: Abstract remote connection timeout stuff This moves some of the logic for managing when to present the 'cancel' dialog for remote operations to altoslib. Signed-off-by: Keith Packard commit f078a591cf2fafe89bb1bb883f49d80750129d44 Author: Keith Packard Date: Wed Jul 11 14:28:53 2012 -0700 altosui: Remove a bunch of debugging printfs These aren't useful at this point. Signed-off-by: Keith Packard commit 846a6298e4a8bfbe87bb24d7b0802c0bf6f233be Author: Keith Packard Date: Wed Jul 11 13:53:30 2012 -0700 Report RSSI values in monitor idle UI (trac #44) This adds a new 's' command to TeleDongle to report RSSI value from last received packet, and then has AltosUI request that value when closing the remote link. Signed-off-by: Keith Packard commit cf44ea354c2d1780cee343132c6058e11e9eefa3 Author: Keith Packard Date: Wed Jul 11 13:52:32 2012 -0700 altos: Fix gcc compiler warnings in GPS code unused variables and mis-matches in printf format codes. Signed-off-by: Keith Packard commit fe70611c3c7d4b8cce3b5292f0ec549f3191bf86 Author: Keith Packard Date: Wed Jul 11 13:50:56 2012 -0700 altos: Create macros to convert from/to radio RSSI representation AO_RSSI_FROM_RADIO and AO_RADIO_FROM_RSSI. Removes a bunch of open-coded versions of the same function. Signed-off-by: Keith Packard commit 18431c88c8a6cb267922b97192e8b7ddb88d0e7e Author: Keith Packard Date: Wed Jul 11 13:49:26 2012 -0700 altos: Have 'make clean' remove all programs, even old ones This makes sure that changing version numbers doesn't leave old compiled output lying around. Signed-off-by: Keith Packard commit 726f47c8a07f060aed930e1d102a1e8b5a5c7aed Author: Keith Packard Date: Wed Jul 11 13:47:25 2012 -0700 altos: remove optimization for 'help' that confuses cc1111 compiler The cc1111 compiler gets this very wrong and prints piles of garbage Signed-off-by: Keith Packard commit 7be98836e69a222b2f9f4baacddcf12d168e2207 Author: Keith Packard Date: Wed Jul 11 13:40:54 2012 -0700 Add megametrum outline to doc dir And install it alongside telemetrum-outline Signed-off-by: Keith Packard commit cc5d106f014f714a9a2d5f595a2de0da8f7da80a Author: Keith Packard Date: Wed Jul 11 13:40:07 2012 -0700 altos: Ignore megametrum built files Signed-off-by: Keith Packard commit 675ccd41e3b668cd4e1d2dd282dd317a00d00151 Author: Keith Packard Date: Wed Jul 11 00:35:21 2012 -0700 Get AltOS version numbers into Mac 'about' dialog Generate Info.plist from Info.plist.in to correctly set the VERSION information. This also changes some strings around to make them look better Signed-off-by: Keith Packard commit 46407f7f3e4d2b6e74b3a2e90b38736a792cfc54 Author: Keith Packard Date: Tue Jul 10 22:41:59 2012 -0700 altos: Force 434.550Mhz by connecting debug gnd and clk (trac #41) Check for pin P2_2 low at startup and set the frequency to 434.550MHz. This value won't get written to flash, so rebooting again will restore the configured frequency. Signed-off-by: Keith Packard commit aa305da7e5dc182c99c09e422c053d85ed48d5d5 Author: Keith Packard Date: Tue Jul 10 22:09:44 2012 -0700 altos: Continuously update ground state while on pad (trac #42) Average data for 5 seconds, wait 5 seconds and if still in pad mode, replace the existing data with the new data. This should avoid averaging in boost data while still keeping things reasonably current. Signed-off-by: Keith Packard commit 0b92164143aaf0d2aa3d5d742484391c16545289 Author: Keith Packard Date: Tue Jul 10 22:08:28 2012 -0700 altos: Set HAS_FLIGHT_DEBUG=1 to include the flight debugging commands This leaves USB enabled, and adds the 'F' command to dump internal flight state. Signed-off-by: Keith Packard commit fb60d87b02c0fc83a0b4268212f0b6b740c984e3 Author: Keith Packard Date: Tue Jul 10 20:35:19 2012 -0700 altos: Signal continuity over radio in pad mode (trac #40) This is especially useful for telemini which has no beeper, allowing you to hear the continuity signal while at the pad over the air. Signed-off-by: Keith Packard commit bca72b782a2909ecedef15ad589292647221ca56 Author: Keith Packard Date: Tue Jul 10 20:34:02 2012 -0700 altos: Add 'void' parameter to ao_fec_decode callback parameter This keeps the compiler from whinging about the lack of a prototype. Signed-off-by: Keith Packard commit aafa8859ecb27383f697b98f6991643b44f4721a Author: Keith Packard Date: Tue Jul 10 20:32:31 2012 -0700 altos: Save some memory. A few minor space savings in ao_cmd.c and ao_config.c. Don't build unused conversion functions ao_altitude_to_pres and ao_temp_to_dC Signed-off-by: Keith Packard commit a60c5a728530e4659a6750d8d5b87000735d4531 Author: Keith Packard Date: Tue Jul 10 15:15:00 2012 -0700 altos: Improve ao_flight_test a bit Add -i flag to include flight description Have run-tests know how many failures to expect Add run_baro to plot a single flight using the baro-only mode Signed-off-by: Keith Packard commit b89d37d357273b97050c00d7fe12022e32799fa8 Author: Keith Packard Date: Tue Jul 10 15:13:55 2012 -0700 altos: add some (unused) test code for different soft-decision sizes This lets us experiment with hard-decision and other possible soft_decision bit depths. Signed-off-by: Keith Packard commit 6694cedd560a7ea9520ef11472c2770b489187c0 Author: Keith Packard Date: Tue Jul 10 15:13:18 2012 -0700 altos: Eliminate compiler warnings when building ao_flight_test We turn on a pile of warnings for that. Signed-off-by: Keith Packard commit 1ae3f467a1d7be2fc3b1a45ba12568a3a25a0099 Author: Keith Packard Date: Tue Jul 10 15:11:36 2012 -0700 altos: Rename *_mm.c back to *.c Was just a temporary hack to keep cc1111 products building during MM development. Signed-off-by: Keith Packard commit 702ca87983594880d7926d2317d63802af82746e Author: Keith Packard Date: Tue Jul 10 15:07:34 2012 -0700 altos: remove stale ao_flight.c and ao_sample.c The mega-metrum versions are now the official versions Signed-off-by: Keith Packard commit 31b05454ec8d90b89fa3039563ff0e86ae80b2a0 Author: Keith Packard Date: Tue Jul 3 21:02:20 2012 -0700 altos: Move profiling settings to Makefile Instead of splitting the changes across Makefile and ao_pins.h, put them both in Makefile to simplify enabling profiling. Signed-off-by: Keith Packard commit 939ad8bfd640ed55116703a58f87af06e75ef87e Author: Keith Packard Date: Tue Jul 3 21:01:01 2012 -0700 altos: Crank up the gaussian noise in the FEC test This lets us check to make sure our receive performance isn't degrading at all, instead of just making sure we can receive perfect packets well. Signed-off-by: Keith Packard commit e8ab00cc45e48230e3b2018ce959114d3fedd228 Author: Keith Packard Date: Tue Jul 3 20:59:35 2012 -0700 altos: Viterbi performance improvments. Down to 5.7ms for command decode Stealing more of Phil's good ideas, decoding a command mode packet has been reduced from 9ms to 5.7ms. Lots more comments to help future-me figure out how this code works. Signed-off-by: Keith Packard commit ea957f9e6144f8411ac84ee2905700f55f5a6e8a Author: Keith Packard Date: Tue Jul 3 00:29:43 2012 -0700 altosui: Fix flight data download for TM. Look for MM flights when graphing A couple of minor fixes, the first to not force the log format so that TM/Tm data will be downloaded correctly and the second to expand the set of files to include '.mega' files when plotting data. Signed-off-by: Keith Packard commit 933fc7e4c2f617e49e1cfdf45b83695290b51456 Author: Keith Packard Date: Mon Jul 2 23:44:10 2012 -0700 altos: Do not block igniters on the radio mutex. Blocking igniters on the radio mutex fails when doing igniter testing over the RF link; the packet receiver task will never release the mutex and the CPU at the same time, causing the system to lock up. Signed-off-by: Keith Packard commit 50b343d389039eae082e82b8ac0b76ae3e2b3ad4 Author: Bdale Garbee Date: Sun Jul 1 23:24:20 2012 -0600 extend cross-compiler availability logic to all target CPUs, not just ARM commit f0ec8416f2e308e40e1b9f34a7c2549989fee5fb Author: Bdale Garbee Date: Sat Jun 30 13:00:33 2012 -0600 conditionalize build of ARM binaries on presence of arm-none-eabi-gcc in PATH commit edbc5d27c8c2936b59ff5289276d9198b501ebc8 Author: Keith Packard Date: Thu Jun 28 17:43:36 2012 -0700 altos: Declare cc1111 accel_ref as unsigned so the math works If accel_ref is signed, then the careful shifting and dividing dance necessary to correct for changes in the relationship between the 5V and 3.3V supplies always generates zero. Signed-off-by: Keith Packard commit ccf64117662fc800a07b3a25e52255b80f8b5eaf Author: Keith Packard Date: Thu Jun 28 16:42:59 2012 -0700 Update version to 1.0.9.6 Signed-off-by: Keith Packard commit ca1bc20735a170a77066f5f37e0ad728899a3989 Author: Keith Packard Date: Thu Jun 28 16:05:56 2012 -0700 altos: Disable MS5607 interrupt in the handler Avoids having the interrupt re-raised multiple times until the reading task finally wakes up. Signed-off-by: Keith Packard commit 572e1664938c7ce6c308b36779f6a412959e03f1 Author: Keith Packard Date: Wed Jun 27 23:11:27 2012 -0700 altos: Track missed HMC5883 interrupts When it fails to signal conversion complete to the CPU, keep track of that and report it with the rest of the current data. Signed-off-by: Keith Packard commit 79dbe1a5e46d7f0b8929400897631ab969cd2bc0 Author: Keith Packard Date: Wed Jun 27 23:09:16 2012 -0700 altos: Increase default STM stack to 648 bytes 512 seems cozy given the printf implementation we're using and the extensive interrupts. Signed-off-by: Keith Packard commit aab7b31b71aa7c87c5a5003084e4b7773c30835f Author: Keith Packard Date: Wed Jun 27 23:05:36 2012 -0700 altos: panic if MPU6000 self test fails Don't try to fly if the board isn't working right. Signed-off-by: Keith Packard commit f9f65211c378849270a6138fda05ed2a166f7d82 Author: Keith Packard Date: Wed Jun 27 23:04:25 2012 -0700 altos: Disable mag sensor for megametrum It doesn't work unless USB is connected or occasionally while the debug port is enabled. It's mystic. Signed-off-by: Keith Packard commit dd623b21cb904238c6d903b6936ff2f8ebf6f339 Author: Keith Packard Date: Wed Jun 27 23:03:33 2012 -0700 altos: Allow megametrum to be built without using the mag sensor I'm having trouble getting it working reliably, so we'll like disable it for now. This patch makes that possible. Signed-off-by: Keith Packard commit bd21c050fd8b96b33ab6859c942bf55cf2b91868 Author: Keith Packard Date: Wed Jun 27 19:47:52 2012 -0700 altos: Make profiling Viterbi decoder more useful This blocks starting the decoder until all of the data have arrived so that the time spent in the decoder is easily computed. Signed-off-by: Keith Packard commit 407cefae9cb95c5910b3bd79851776c48729e06b Author: Keith Packard Date: Wed Jun 27 19:45:22 2012 -0700 altos: Unroll viterbi state loop for >30% performance boost 9.3ms vs 14.7ms, a clear win. Signed-off-by: Keith Packard commit 4f258fe565dc3e58b83761bfa1a2276946012163 Author: Keith Packard Date: Wed Jun 27 17:18:57 2012 -0700 altos: Clean up STM I2C clock computations Fix both clock time and rise time. Signed-off-by: Keith Packard commit 84f9a525c64491afa9b7a565e3c10a4cee106e14 Author: Keith Packard Date: Wed Jun 27 17:17:44 2012 -0700 altos: Clean up radio CRC handling Make the FEC code just set the CRC_OK bit like the cc1111 radio does; eliminates a bunch of weird conventions across the FEC API. Signed-off-by: Keith Packard commit b0b7f5da2d29716959c6793d744e47a3d435c247 Author: Keith Packard Date: Wed Jun 27 14:38:35 2012 -0700 altos: get MPU6000 I2C link working reliably This slows the i2c bus to 100kHz (yuck), sets the rise time to spec (it was way off) and adds more delays during bus setup. I've run this for hours now without trouble. Will try to adjust things back to fast mode and see if I can make that work as 100kHz isn't fast enough to reliably get data at 100 samples/sec. Signed-off-by: Keith Packard commit e63d624f9670b5e2e002fcd5f24b80cf7f1effdf Author: Keith Packard Date: Wed Jun 27 14:35:56 2012 -0700 altos: reorder stm USB state stores to avoid races Must set ao_usb_in_pending before telling USB about new data or an interrupt could arrive at the wrong time to clear it. Same for ao_usb_in_flushed. Without these changes, I've seen the USB bus lock up on occasion, waiting for an IN packet to consume data, but with no IN data pending in the hardware. Signed-off-by: Keith Packard commit 08a4ed8fe794a2b2b52147bd5535fe0954822e95 Author: Keith Packard Date: Wed Jun 27 14:34:53 2012 -0700 altos: include targe SPI speed in get request STM needs it to be provided when enabling the SPI device, so just fix AVR and cc1111 to do the same. Signed-off-by: Keith Packard commit 1a1d4a557a30e2e743936b828b654187ec562ca8 Author: Keith Packard Date: Wed Jun 27 02:46:27 2012 -0700 altos: Wait for i2c START condition before setting interrupt bits This seems better than the random loop that it replaces, but I still have no idea why this is required; it doesn't coorespond to the docs at all... Signed-off-by: Keith Packard commit 9695a217e13f9d194b6dc40e2696017e5f8e8176 Author: Keith Packard Date: Wed Jun 27 01:22:32 2012 -0700 altos: disable FEC debug on MM Seems to work; we'll leave the code around in case something bad happens later. Signed-off-by: Keith Packard commit b96eece8e42df0713fc92d47b6bb27604c0168a2 Author: Keith Packard Date: Wed Jun 27 01:22:00 2012 -0700 altos: Clean up cc1120 driver a bit Make some variables static, remove stale debug code Signed-off-by: Keith Packard commit a00aff5ee93ea9763b5c0466fcecc823cad135ef Author: Keith Packard Date: Wed Jun 27 01:20:43 2012 -0700 altos: Don't try to grab radio while firing MM igniters If you're in idle mode, you stop forever as the packet mode receiver will own the radio mutex forever. Signed-off-by: Keith Packard commit 8fc643c9768f0db31a248331681af9490f5715af Author: Keith Packard Date: Wed Jun 27 01:19:05 2012 -0700 altos: stm i2c debug code was calling flush() even when disabled The fancy stm i2c debugging code had calls to flush() that were invoked outside of the conditionals leading to all kinds of fun -- flush() may re-enable interrupts, yield or do all kinds of wacky stuff, none of which is appropriate from the middle of a device driver Signed-off-by: Keith Packard commit 0285696e5280fc64774b6c3a2fcdaa36bd36ae7c Author: Keith Packard Date: Wed Jun 27 01:17:51 2012 -0700 altos: mpu6000 requires a delay during start I have no idea why this is required, but the mpu6000 will not come up and run if this isn't present. Signed-off-by: Keith Packard commit 4847595e0383e5ff9c5a373f3c7f2af8c210c50a Author: Keith Packard Date: Tue Jun 26 23:25:00 2012 -0700 altos: ao_ignite.c is no longer cc1111 specific Move it to core Signed-off-by: Keith Packard commit 8efac8eb99a9aabb45d9fbf742e4be91e4b331a5 Author: Keith Packard Date: Tue Jun 26 23:21:04 2012 -0700 altos: Add debugging code to check for stack overflow Stack overflow often happens from interrupt handlers sitting on top of a task stack. Check for this during ao_wakeup as that is often called during interrupt processing. Signed-off-by: Keith Packard commit ebeac02a990da3fa6dd71487141d0bc6f78b42de Author: Keith Packard Date: Tue Jun 26 23:20:17 2012 -0700 altos: Enable full flight computer functionality in MegaMetrum This turns on everything that currently works Signed-off-by: Keith Packard commit fb2b83fcd28199d8c686e676d46d6ecfbf706f37 Author: Keith Packard Date: Tue Jun 26 23:18:44 2012 -0700 altos: Create a 32-bit 1MHz timer for use in profiling execution This provides a simple method for getting high-resolution timer data to use in performance tuning code. It's not used by default anywhere. Signed-off-by: Keith Packard commit 097b337eb9b7deff13d5dcdafddec9bec3868b93 Author: Keith Packard Date: Tue Jun 26 23:17:00 2012 -0700 altos: Abort radio receive when using flash memory on megametrum Radio receive camps on the SPI bus, making it impossible to access flash memory. Abort any pending receive operation when trying to get to the flash part. Yes, this is a total hack. Signed-off-by: Keith Packard commit 1ae69a1c2ce7e45db9d9c175bc63867eff68ebe5 Author: Keith Packard Date: Tue Jun 26 23:15:54 2012 -0700 altos: Make gcc happy with ao_telemetry_set_interval Using unsigned locals made GCC sad as it was compared with a signed value. Signed-off-by: Keith Packard commit c4036bf6e7997b618f89a05dd1214c16066ba2b2 Author: Keith Packard Date: Tue Jun 26 23:14:13 2012 -0700 altos: Turn radio-related bits of ao_flight_mm.c Now that MM has full radio functionality, we can make it work right. Signed-off-by: Keith Packard commit b5f5fd92109ac6f4909a81303d52bc9220cc2520 Author: Keith Packard Date: Tue Jun 26 23:13:14 2012 -0700 altos: custom hex printer for telemetry packets Using printf is way too slow with pdclib; just hand-write hex byte output. Signed-off-by: Keith Packard commit f1ae622eff60e05c1f5d8f822a3cf6a85750c6cc Author: Keith Packard Date: Tue Jun 26 23:11:10 2012 -0700 altos: Optimize FEC encode and decode Integrate interleaving, CRC and padding within the decode/encode functions. Provide for ISR priorities so that the 1120 RX interrupt takes precedence over the other interrupts or we risk losing bits. Optimize the viterbi decoder a bit (goes from 10ms per packet to 7ms per packet). Signed-off-by: Keith Packard commit 936ecad62596f34773afb7460b10f63df7d0896d Author: Keith Packard Date: Tue Jun 26 23:07:38 2012 -0700 altos: Add GPS logging code for MegaMetrum MM uses a different logging format with larger log blocks, so restructure the GPS logging code to fill them up Signed-off-by: Keith Packard commit 33f8f7add27a02d24b0671da353b59762224c1ee Author: Keith Packard Date: Tue Jun 26 23:05:42 2012 -0700 altos: Make cc1111 radio control functions static No need to publish these; they're all private to cc1111 Signed-off-by: Keith Packard commit 03dc80d15a2f8fe9d7340351226dadd8bc3cfdb9 Author: Keith Packard Date: Tue Jun 26 23:01:58 2012 -0700 altos: Clean up usage of port parameters Make stm port parameters always be pointers; this avoids the confusion where some macros took '&port' and others took a bare 'port', and also unifies code to run on other processors in a consistent fashion. Signed-off-by: Keith Packard commit f11f05c5d634de2a80c34d0d3dc93925980f52e6 Author: Keith Packard Date: Tue Jun 26 22:20:50 2012 -0700 altosui: Make libaltos recognise new USB ids libaltos has a small range of 'AltusMetrum' products to avoid opening other devices. We've got more IDs, so open up the range. Signed-off-by: Keith Packard commit 9dcb4e2ab60ecf0cc7371c1b1a620be952fa8776 Author: Keith Packard Date: Tue Jun 26 22:19:01 2012 -0700 altosui: AltosSerial and AltosLink both tried to provide frequency setting AltosLink owns all of the device configuration, so remove that from AltosSerial and make sure that AltosLink provides the right function signatures (wasn't using the new direct frequency setting command). Signed-off-by: Keith Packard commit eab18714ed9eabbcef0ff81b07427da042a58ccc Author: Keith Packard Date: Tue Jun 26 22:16:44 2012 -0700 altos: rename ao_viterbi.c to ao_fec_rx.c Keep it parallel with ao_fec_tx.c Signed-off-by: Keith Packard commit 09761fe0f6ed40ff74317fbb47d6a74068fb4ce4 Author: Keith Packard Date: Mon Jun 25 06:51:36 2012 -0700 altos: Incremental viterbi decode Decode radio input one interleave block at a time. This overlaps the decode computation with the packet reception, leading to lower latency in an attempt to keep up with the transmitter. Signed-off-by: Keith Packard commit 628076aa90e7bc9a894646e417dd8e1fe149b60d Author: Keith Packard Date: Mon Jun 25 06:38:34 2012 -0700 altos: decode cc1120 received packets Call the fec decode function, compute RSSI and check CRC Signed-off-by: Keith Packard commit 70cf32e89df19bde5185339fc703532c8a5b8be6 Author: Keith Packard Date: Mon Jun 25 05:03:34 2012 -0700 altos: Get cc1120 packet reception working Interrupt-per-bit, but it seems to work Signed-off-by: Keith Packard commit 246174b32bb6cf827d240c32d6a51c3513a08c37 Author: Keith Packard Date: Mon Jun 25 05:03:16 2012 -0700 altos: Forgot ao_telemetry.h Not much builds without this... Signed-off-by: Keith Packard commit b292c14790fc225029cba3f80ce8ad6c5652bc4e Author: Keith Packard Date: Sat Jun 23 16:05:42 2012 -0700 altos: improve FEC apis to reduce data copying Integrate interleaving and whitening into encode and decode steps. Add CRC checking function for receive. Make ao_fec_test program round-trip the data and verify correctness. Signed-off-by: Keith Packard commit 74f6a1a8c8fa9d5bb8d74c99782310b431dd4727 Author: Keith Packard Date: Sat Jun 23 02:24:30 2012 -0700 altos: Add ao_viterbi.c to megametrum build It's not used yet, just wanted to see how big the resulting object file was (492 bytes). Signed-off-by: Keith Packard commit 566a0c277de01963922cabc80db8ec3a129923bd Author: Keith Packard Date: Sat Jun 23 02:23:08 2012 -0700 altos: fix comment about decoding last byte of FEC data There aren't *any* forward bits to use when decoding the last byte. Signed-off-by: Keith Packard commit 83549f8bde42c3fddbdc817540c869dc8aefd013 Author: Keith Packard Date: Sat Jun 23 02:13:52 2012 -0700 altos: Make ao_fec_tx_test build cleanly with -Wall Signed-off-by: Keith Packard commit f7bf07dfdad260c1f219064957ef08fb480bf20f Author: Keith Packard Date: Sat Jun 23 02:12:58 2012 -0700 altos: optimize Viterbi implementation Minimize data usage, make data arrays static Signed-off-by: Keith Packard commit ff8de3af193839de4bacfd07ade7a5f9ac0bf5b3 Author: Keith Packard Date: Sat Jun 23 00:54:42 2012 -0700 altos: incremental viterbi decode Decode bits incrementally. Don't bother decoding the last byte; it's always a pad byte. Signed-off-by: Keith Packard commit 047e95421c87c5d056038797b48f759bedabf245 Author: Keith Packard Date: Fri Jun 22 23:31:11 2012 -0700 altos: Start optimizing viterbi decoder Only need two cost arrays (previous and next). Create constant full-width decoder table instead of expanding bits into bytes for each decode step. Signed-off-by: Keith Packard commit cbf79a0f9cb859d04e8e03d627219cb2bf49611f Author: Keith Packard Date: Fri Jun 22 23:12:02 2012 -0700 altos: Add the simplest possible viterbi decoder I think I understand how it works now. It's not exactly speedy, and it uses a lot of memory. Signed-off-by: Keith Packard commit 75e4521ec42a368cebc67a07f8713d7a854ea265 Author: Keith Packard Date: Thu Jun 21 09:52:37 2012 -0700 altos: Move FEC code to core It's not a driver as it's not specific to the 1120 chip Signed-off-by: Keith Packard commit 0b5548d6ced67201311e1072d37fbedd3d9929c9 Author: Keith Packard Date: Thu Jun 21 09:51:17 2012 -0700 ao-tools: Support MM telemetry packets in ao-telem Parse the new packet formats Signed-off-by: Keith Packard commit 6f421818fd7062f03bfaf9e606d6a4cfdcb13b49 Author: Keith Packard Date: Thu Jun 21 09:50:18 2012 -0700 altosui: Support MM telemetry packets Required restructuring the whole telemetry system to provide abstract interfaces to flight data. Signed-off-by: Keith Packard commit ff5b0ba90e73a83360a2e8a7e9969ed2c3ce1514 Author: Keith Packard Date: Thu Jun 21 09:46:50 2012 -0700 altos: Crank down STM SPI speed for MM The cc1120 is noisy enough to break SPI data transfers at 4MHz, so crank things down to 1MHz. It's "stable" now, but clearly needs a filter and shorter traces. Signed-off-by: Keith Packard commit d2bd95edb6f77daeb1e8f043c4a239c248728e0c Author: Keith Packard Date: Thu Jun 21 09:45:42 2012 -0700 altos: Add full MM telemetry Create two new telemetry packets to hold all of the MM data. This patch also splits the telemetry structures out of ao.h Signed-off-by: Keith Packard commit 419a801131c1034f1fa149a67850290431cbda72 Author: Keith Packard Date: Thu Jun 21 09:39:10 2012 -0700 altos: Configure STM LCD driver for giant LCD digits These devices require static mode. Signed-off-by: Keith Packard commit 611f37607fadcdc9908d67456f844a452ad4a87a Author: Keith Packard Date: Sun Jun 17 19:11:35 2012 -0700 altos: Make sure ao_storage_config is set before reading config block ao_storage_read does in fact call ao_storage_setup, but we need the value of ao_storage_config *before* calling ao_storage_read, so call ao_storage_setup first. Signed-off-by: Keith Packard commit ae3662c56effda9f0516c7d6ffd2d5f56b859593 Author: Keith Packard Date: Sun Jun 17 19:06:08 2012 -0700 altos: hack STM serial number to 58 otherwise altosui won't record telemetry Signed-off-by: Keith Packard commit 976a8375932ddb46ca3100863b0a892732c0923e Author: Keith Packard Date: Sun Jun 17 19:04:53 2012 -0700 altos: make cc1120 ao_radio_send re-entrant It gets called from multiple tasks, so put local data on the stack. Signed-off-by: Keith Packard commit 629f43e7c7abbff33e14b168a08a4b6a9c88b937 Author: Keith Packard Date: Sun Jun 17 19:04:22 2012 -0700 altos: Add telemetry to megametrum Now that the radio works Signed-off-by: Keith Packard commit 9b24f413da0b6d989b32e8654a91c8deee4c81dd Author: Keith Packard Date: Sun Jun 17 19:02:50 2012 -0700 ao-tools: add rudimentary support for MM telemetry to ao-telem Just pretends they're TM packets for now Signed-off-by: Keith Packard commit 4cb46b8a84a0dd5b8fcb479d7aa5157480e1bc67 Author: Keith Packard Date: Sun Jun 17 19:01:24 2012 -0700 altosui: Add rudimentary MM support to altosui Decoded the MM sensor packets as if they were TM packets. Add the USB ids. Add class of 'altimeter' devices and match those instead of just telemetrum as appropriate. Signed-off-by: Keith Packard commit 55747ce210d7d80d5b4fdaaf9dc7ee0f7bc8b0a3 Author: Keith Packard Date: Sun Jun 17 18:58:56 2012 -0700 altosui: Move product definitions from AltosUI to AltosLib Signed-off-by: Keith Packard commit e6d236fdc615625fbbf28377453f920729e49b0f Author: Keith Packard Date: Sun Jun 17 16:17:00 2012 -0700 altos: Software implemenation of CC1111 radio encoding Add CRC, whitening, FEC and interleaving routines for transmission path to allow cc1120 to send telem packets to cc1111. Signed-off-by: Keith Packard commit 1a294852b3607947f0f86bf236785456d8719e5f Author: Keith Packard Date: Sun Jun 17 16:14:33 2012 -0700 altos: Be more careful about register save/restore in ao_yield Make sure the general registers are all saved before messing with any of them. Then, explicitly use r0 to save/restore apsr and primask. Signed-off-by: Keith Packard commit 9d3fe2a80d0925e3eded6d738d05c5b4ea61504c Author: Keith Packard Date: Sun Jun 17 16:12:18 2012 -0700 altos: Don't lose IRQ disabled state in ao_sleep Using ao_arch_critical around the wchan setting will force interrupts to be re-enabled before ao_yield records the state of that bit, potentially causing problems with functions not atomically testing and sleeping. Tasks that need to set wchan with interrupts disabled should have interrupts disabled when entering ao_sleep already. Signed-off-by: Keith Packard commit 4e6d96816e6604ee8d9bb49345a1c1211699a655 Author: Keith Packard Date: Sun Jun 17 16:11:23 2012 -0700 altos: ao_storage_read already calls ao_storage_setup No need to call twice. Signed-off-by: Keith Packard commit ca310342d7b0bd1b78318cae38d920b8690dfd36 Author: Keith Packard Date: Sun Jun 17 16:09:43 2012 -0700 altosui: Catch timeout errors when setting up TD telem monitoring Close the port in this case so it can be used for other things. Signed-off-by: Keith Packard commit 58e005375ca29dec6091d87159055004e7f19605 Author: Keith Packard Date: Sun Jun 17 12:43:43 2012 -0700 altos: Use interrupts to wake up after RDF transmission. Also clean up the debug output Signed-off-by: Keith Packard commit 5df94f74522357e062f4ec2786ff825381b2fb10 Author: Keith Packard Date: Sun Jun 17 12:42:32 2012 -0700 altos: Crank cc1120 power down to 0dBm to avoid crashing CPU Looks like RFI from the transmitter is confusing the CPU; lower the 1120 power output from +14dBm to +0dBm to keep the CPU happy. Signed-off-by: Keith Packard commit e856df474c386b8df3d2bd9e87b766ae0439efbf Author: Keith Packard Date: Fri Jun 15 22:41:17 2012 -0700 altos: Reduce STM SPI data rate to 4MHz cc1120 doesn't want more than 6.1MHz, otherwise it gets very angry. Signed-off-by: Keith Packard commit e09e35471e788b88909ff01037fb8e0e4eabcd7d Author: Keith Packard Date: Fri Jun 15 22:40:30 2012 -0700 altos: Start making cc1120 radio work RDF tones and radio calibration work now. Signed-off-by: Keith Packard commit c2949ea15c59215834fedac7646f50c8a09f716f Author: Keith Packard Date: Fri Jun 15 22:38:37 2012 -0700 altos: Fix cc1120 packet mode datarate and config Was using the wrong function Signed-off-by: Keith Packard commit 1b7e4c29bf9608bfc972ae28b53cc823f4c37f92 Author: Keith Packard Date: Fri Jun 15 22:32:10 2012 -0700 altos: Make sure cc1120 is initialized correctly at startup time Check to make sure it pulls down MISO when CS is enabled. Signed-off-by: Keith Packard commit 27c95adf35e646840b9bd562497eea0dc96bb9bb Author: Keith Packard Date: Fri Jun 15 22:31:36 2012 -0700 altos: use 'b' command for radio beep 'B' is used by the baro data dumper. Signed-off-by: Keith Packard commit 93e6d0a2c0b60e7bedd34f06ba63b468dcc8e013 Author: Keith Packard Date: Fri Jun 15 22:30:03 2012 -0700 altos: Fix RDF mode data rate and PKT_CFG0 value Changes tone to the desired 1kHz frequency and ensures the PKT_CFG0 has the right value. Signed-off-by: Keith Packard commit c96e60bedeb00d28c36436c12b803fd8cbadce26 Author: Keith Packard Date: Fri Jun 15 22:28:55 2012 -0700 altos: Actually write cc1120 register values Helps to not use 'read' mode when writing. Signed-off-by: Keith Packard commit 97d163c88ed8c8f64a9714018863d0b6eedab38f Author: Keith Packard Date: Fri Jun 15 22:27:48 2012 -0700 altos: Configure cc1120 frequency Set default conversion value, and pull the selected frequency calibration data out of the config block. Signed-off-by: Keith Packard commit a5a7df405c242593cbc828d5b66bbfc141a35947 Author: Keith Packard Date: Fri Jun 15 22:26:06 2012 -0700 Temporarily disable packet and telem on MM While work on the radio code progresses Signed-off-by: Keith Packard commit baf1be1def01266512e67068948bf19b04ead6aa Author: Keith Packard Date: Fri Jun 15 22:23:10 2012 -0700 Allow product to override maximum number of command lists (NUM_CMDS) Just in case some product wants to save memory, or have more. Signed-off-by: Keith Packard commit bfbd1d82f4c25120a97840a1bd4787680823afd8 Author: Keith Packard Date: Tue Jun 5 15:15:25 2012 -0700 altosdroid: Add files necessary to build application Signed-off-by: Keith Packard commit b8c363d9411fd5e79e3f806894dbc12bcc106b88 Author: Keith Packard Date: Mon Jun 4 20:56:25 2012 -0700 altosui: More changes to migrate code to altoslib Signed-off-by: Keith Packard commit 5634192a6036c6c7b47d224e2988e81bb71a4557 Author: Keith Packard Date: Mon Jun 4 20:55:33 2012 -0700 altosui: attempt to get ms5607 data into .mega files was misinformed The ms5607 'p' command also means 'go into packet mode', which nicely broke attempts to communicate with teledongle Signed-off-by: Keith Packard commit 705891be53e298ac6ced4ba02b87d2f6d1085b34 Author: Keith Packard Date: Mon Jun 4 20:54:36 2012 -0700 altos: Make cc1111 products all depend on ao_arch.h and ao_arch_func.h Ensures that files get recompiled as needed Signed-off-by: Keith Packard commit a9ad342ae4c34626df4f2891da4c7f6d2c14d73e Author: Keith Packard Date: Mon Jun 4 20:53:53 2012 -0700 altos: Other half of the ms5607 prom reporting patch Signed-off-by: Keith Packard commit dec5cbee22f13c47690b0c6bf7ca724ef132fe5e Author: Keith Packard Date: Mon Jun 4 20:53:06 2012 -0700 altos: typo in ao_monitor prevented ground station from including code This created ground station software that couldn't actually receive and report telemetry packets. Signed-off-by: Keith Packard commit e687a9bafc696998b47fd0300fbc89dece09509c Author: Keith Packard Date: Mon Jun 4 20:52:38 2012 -0700 altos: Make 'v' command dump pressure sensor ROM values Avoids needing a new command Signed-off-by: Keith Packard commit 1832e2f76c844e97a2bd11226b003fb2af8057db Author: Keith Packard Date: Mon Jun 4 20:51:35 2012 -0700 altos: fix test builds of non-accel flight code Remove references to accel variables when building baro-only flight test code. Signed-off-by: Keith Packard commit 06afa2c3e78ea5bc9f1eb4913ee35c0eab0ac1bf Author: Keith Packard Date: Mon Jun 4 20:50:10 2012 -0700 altos: Legacy telemetry needs original ADC record The legacy telemetry packets included the raw ADC structure directly, so make sure that doesn't change further, allowing teledongle firmware to remain compatible with old TM firmware. Signed-off-by: Keith Packard commit f1b14932149153a096961fff94191778f88581d9 Author: Keith Packard Date: Mon Jun 4 20:49:15 2012 -0700 altos: Remove unused AES code from teledongle and tidongle Leave this out as neither of these products need it. Signed-off-by: Keith Packard commit 718a8affe1df98eacfd707b5c8c34f9456dcff14 Author: Keith Packard Date: Mon Jun 4 20:47:14 2012 -0700 altos: Remove accel_ref from pre v1.1 TM firmware V1.0 needs RAM space for flash buffer, leaving too little room for this extra data. Signed-off-by: Keith Packard commit 7a19d6790a9800f925c8de24aac71796351e2c04 Author: Keith Packard Date: Mon Jun 4 19:28:58 2012 -0700 altos: More cleanups for moving files to altoslib Signed-off-by: Keith Packard commit f86dac643081987c8994ab57a96640d5e91b342a Author: Keith Packard Date: Sat Jun 2 19:59:40 2012 -0700 altoslib: Clean up random rebase failures Signed-off-by: Keith Packard commit dd43a2ae7594f062a8980d1756a07488ee54b447 Author: Keith Packard Date: Sat Jun 2 19:42:47 2012 -0700 altoslib: Move new sensor library code into altoslib Signed-off-by: Keith Packard commit 0772020c969a69c3b0a705de7362340a9732daab Author: Keith Packard Date: Fri Mar 16 20:27:45 2012 -0700 Build altosdroid commit e81163ed875dc93a618baf9278f43ed7dd0f730e Author: Mike Beattie Date: Thu Feb 23 16:43:04 2012 +1300 Add local.properties to .gitignore Signed-off-by: Mike Beattie commit 392c878000e9909d37dae6342df3d6cb8f217a1b Author: Mike Beattie Date: Thu Feb 23 16:41:26 2012 +1300 Add TelemetryService.java and associated files Signed-off-by: Mike Beattie commit 69e6df07976a56b49e07c242cd6e5b2cbd2a578d Author: Keith Packard Date: Thu Feb 23 17:00:48 2012 +1300 Move altoslib sources to top dir No sense having them live deep in the file system. Signed-off-by: Keith Packard commit 9b659904109f992b8a3e61efb94e81cdb19af1c9 Author: Keith Packard Date: Thu Feb 23 16:37:24 2012 +1300 Demonstrate using AltosLib from altosdroid Get things hooked up so that we can use AltosLib functions from the android application; it's a bit of a hack at present, but appears to work. Some more 'official' technique would be nice... Signed-off-by: Keith Packard commit a018724e40f2a4c0bae8b3d5c77bb90328ad4314 Author: Keith Packard Date: Thu Feb 23 11:15:23 2012 +1300 Ignore generated altoslib files Signed-off-by: Keith Packard commit 025eb09b5de9b50de143da9f36bc02818e018ba9 Author: Keith Packard Date: Wed Feb 22 23:39:01 2012 +1300 Build Android local.properties from local.properties.in Make sure the SDK path is set correctly Signed-off-by: Keith Packard commit 3a80545d4ecedc4b98a9ee8296ab6abbbf64312d Author: Mike Beattie Date: Wed Feb 22 23:40:25 2012 +1300 Add $HOME/android as an SDK location Signed-off-by: Mike Beattie commit 091affece185dcd0832a55b0befeacaa182a57bb Author: Keith Packard Date: Fri Jan 13 10:40:30 2012 -0800 doc: Add companion SPI message protocol doc Signed-off-by: Keith Packard commit bb5b5312a0c6102b12f3d4710ef213f0f6c67412 Author: Keith Packard Date: Sat Jan 7 20:56:49 2012 -0800 altosui: Clean up a few 'fat' build rules Signed-off-by: Keith Packard commit fc86ae58c3a296730fa99010cc27b8b3c2c3b780 Author: Keith Packard Date: Thu Jan 5 16:30:41 2012 -0800 Add altosdroid/Makefile.am commit dfa059b22bf15de3f25328aeef4fdb8e5ca664dc Author: Mike Beattie Date: Wed Jan 4 21:01:44 2012 -0800 Add AltusMetrum Logo as app icon, and change app name Signed-off-by: Mike Beattie Signed-off-by: Keith Packard commit 402f1e76909229fc0c3b54743ba577b657495faf Author: Keith Packard Date: Wed Jan 4 20:54:40 2012 -0800 altosdroid: build android bits when possible Locate android sdk automatically Signed-off-by: Keith Packard commit a48e4d40729e736929632ec422fd189ecdfba33b Author: Keith Packard Date: Wed Jan 4 20:33:06 2012 -0800 altosdroid: import code from mjb Signed-off-by: Keith Packard commit 81465a20049da40cd8d3cda920d6585ffe87bfe3 Author: Keith Packard Date: Wed Jan 4 20:28:42 2012 -0800 altosui: Move java altoslib to top level This will be shared with other (android) java code. Signed-off-by: Keith Packard commit d6df16525927d8096d1c0cccf4c86bf4c6599d53 Author: Keith Packard Date: Mon Jan 2 22:43:48 2012 -0800 Add altoslib/.gitignore commit 02b53b7f592b78b2fec4f4a17b6b3e114d2bf3c5 Author: Keith Packard Date: Mon Jan 2 22:42:18 2012 -0800 altosui: Fix AltosTelemetryReader move Lost the provided link value causing a crash. Signed-off-by: Keith Packard commit 9fb15d397890c7e78bf3c1438f142f62bfc2bd35 Author: Keith Packard Date: Mon Jan 2 22:41:48 2012 -0800 altosui: Remove unused files Left around from development, these aren't useful. Signed-off-by: Keith Packard commit 5270a0f1416baef5fde08547c6c98d97f973ae95 Author: Keith Packard Date: Mon Jan 2 22:35:41 2012 -0800 altosui: Move telemetry reader &c to altoslib Move all of the device and file reading code into altoslib Signed-off-by: Keith Packard commit 93305717ac4c993c88d9144d797ca64d26db97c5 Author: Keith Packard Date: Mon Jan 2 22:13:38 2012 -0800 altosui: Move AltosState.java to altoslib Signed-off-by: Keith Packard commit a5ac5c37ea385e3a2b2703c6f125b4e3b55e867a Author: Keith Packard Date: Mon Jan 2 22:05:47 2012 -0800 altosui: Pull most of AltosSerial into AltosLink Share basic command processing across java users Signed-off-by: Keith Packard commit 18914b9a84bbd8c4364a1568bb07dcc2b04ad7ba Author: Keith Packard Date: Mon Jan 2 21:12:45 2012 -0800 altosui: Move AltosGreatCircle.java to altoslib Signed-off-by: Keith Packard commit 027863b737190bccc3b5cd032d77587396d0c5c4 Author: Keith Packard Date: Mon Jan 2 21:08:34 2012 -0800 altosui: Move AltosEepromTeleScience.java to altoslib Signed-off-by: Keith Packard commit 346df410f570a67cda057550a067fa2b451b785d Author: Keith Packard Date: Mon Jan 2 21:05:02 2012 -0800 altosui: Move more eeprom stuff to altoslib Signed-off-by: Keith Packard commit a4ccdd253a9873c16f194a63a79f0c26feaafa29 Author: Keith Packard Date: Mon Jan 2 20:57:57 2012 -0800 altosui: Move eeprom managment code to library Signed-off-by: Keith Packard commit 89aa06cfdcb02de1894ccb01aed97782f9eec9b2 Author: Keith Packard Date: Mon Jan 2 20:47:16 2012 -0800 altosui: Move AltosEepromChunk.java to lib Also fixes install issues with split lib Signed-off-by: Keith Packard commit b273b8b298540b1a6d0a87b1cf61df1fbf62e013 Author: Keith Packard Date: Mon Jan 2 20:39:16 2012 -0800 altosui: Finish moving AltosConfigData to altoslib Signed-off-by: Keith Packard commit 4c88b0ca96758b663c82395e63b338043d1c1a10 Author: Keith Packard Date: Mon Jan 2 20:34:38 2012 -0800 altosui: Move AltosConfigData.java to library Create a new 'AltosLink' which exposes how to talk to the remote device abstractly via 'get_reply' and 'printf' methods. Signed-off-by: Keith Packard commit ead8f1cfca2c454d18dce56479899f2b423d8bdd Author: Keith Packard Date: Mon Jan 2 20:32:35 2012 -0800 altosui: Add back in the split-out Altos constants as AltosLib These were pulled out of Altos.java, but not added back to git Signed-off-by: Keith Packard commit 3c2f601139d36761de6a8a2210545d082ef16133 Author: Keith Packard Date: Mon Jan 2 17:26:59 2012 -0800 altosui: Complete split out of separate java library Signed-off-by: Keith Packard commit 40ee170753f4fd422c848e34a8da104683b7c8a2 Author: Keith Packard Date: Mon Jan 2 16:16:51 2012 -0800 altosui: Clean swing/awt bits out of altoslib Signed-off-by: Keith Packard commit 71636c1ed7cbe075921391605d1ac4edaa6ee52b Author: Keith Packard Date: Mon Jan 2 16:13:46 2012 -0800 move a file back commit 6510e8495fc5e8057b6092963def4d78978625a0 Author: Keith Packard Date: Mon Jan 2 16:09:29 2012 -0800 altosui: Split out lots of the altosui code to a shared library To be shared with the Android application eventually Signed-off-by: Keith Packard commit 97663f922e236f4ee7bd08277ca80d419b5cd10f Author: Keith Packard Date: Mon Jan 2 15:45:14 2012 -0800 altosui: Split out UI-specific preferences Prepare to create library shared with android application. Signed-off-by: Keith Packard commit c9e52287751867d9e451146ccde78109609d30d7 Author: Keith Packard Date: Sat Jun 2 19:06:08 2012 -0700 altosui: Fixed width format for new IMU values. Signed-off-by: Keith Packard commit 9aa7993ee31bdfd6890ad7262a0375c07464ee76 Author: Keith Packard Date: Sat Jun 2 17:09:00 2012 -0700 altos: Intgrate hmc5883 sensor into adc ring Creates a task to poll the mag sensor and place the data into the sensor data ring. Signed-off-by: Keith Packard commit 69a8907ecbb7ca0e8526aeea0dc7490a191a0f8b Author: Keith Packard Date: Sat Jun 2 16:57:22 2012 -0700 altos: Get HMC5883 driver limping along Not pushing data into the ring yet, but the chip appears to work now. Signed-off-by: Keith Packard commit 97317d332f21c42860747c4ecde633bd0228ef52 Author: Keith Packard Date: Sat Jun 2 16:56:41 2012 -0700 altos: Reset i2c controller at boot time In case it's wedged. Signed-off-by: Keith Packard commit 64e2e66a5239541b15f43172655cfb3560bec79b Author: Keith Packard Date: Sat Jun 2 16:54:42 2012 -0700 altos: Fix broken EXTI edge mode selections. Clear pending exti on enable Make sure the edge mode registers are set according to the requested mode. Clear any pending interrupt when enabling to avoid spurious isr call Signed-off-by: Keith Packard commit 8d425ffba84ec6f632e8c0d44105de73242a86a9 Author: Keith Packard Date: Sat Jun 2 16:53:46 2012 -0700 altos: Route correct GPIO line to interrupt controller Which GPIO a particular pin interrupt comes from is selected by the SYSCFG EXTICR registers; set these when an exti interrupt is configured. Signed-off-by: Keith Packard commit 1353b277f8314fbddef81c743bd6ea229364fd18 Author: Keith Packard Date: Sat Jun 2 14:58:00 2012 -0700 altos: Enable some debugging during flight mode on MM Until we've got the radio working, there's no way to see inside the MM state without using USB. Add a diagnostic command to dump out the internal flight state variables. Signed-off-by: Keith Packard commit c04af7533bd3fd3f3260338c0753fde966131720 Author: Keith Packard Date: Fri Jun 1 23:07:38 2012 -0700 altos: Add support for MegaAccel daughter card. Switches all acceleration computation to using the MegaAccel accelerometer to ensure support for high-g flights. MPU6000 values continue to be logged as normal Signed-off-by: Keith Packard commit 1824761f5b98e92485e2dd347b1c4d043ec207e2 Author: Keith Packard Date: Fri Jun 1 19:51:25 2012 -0700 altosui: Quick hacks to download megametrum data and convert to CSV Very little useful data crunching is done, but at least we can save and convert files Signed-off-by: Keith Packard commit ab85337aa942cb73a08bd3b783771179773b9a67 Author: Keith Packard Date: Fri Jun 1 19:35:33 2012 -0700 altos: Timers clock base depends on perhipheral bus prescalers too For some weird reason, a non-unity perhipheral bus clock scaler affects the base of the various timers; this left the 100Hz tick running at 200Hz. Signed-off-by: Keith Packard commit ff4f3a56e09d595abbe32293cbdf1fe368633c49 Author: Keith Packard Date: Fri Jun 1 19:35:01 2012 -0700 altos: megametrum has logging This makes sure the various other subsystems know about it, like the 'v' command. Signed-off-by: Keith Packard commit 6806103bad98385c0ec122d400f981eb81c59dd3 Author: Keith Packard Date: Fri Jun 1 19:34:17 2012 -0700 altos: add high-z accel and mag sensor to megametrum logging These nicely fill the 32-byte sensor log record Signed-off-by: Keith Packard commit e5aebfe0203de9e69712fac291c8cd0d3a96a385 Author: Keith Packard Date: Fri Jun 1 19:33:18 2012 -0700 altos: Mark full and mega logging correctly in 'v' command Make sure megametrum reports 'log format 5'. Signed-off-by: Keith Packard commit 7fce3ddf5e7e92a14cefb7fcf35e4014df744987 Author: Keith Packard Date: Mon May 28 11:48:04 2012 -0600 Bump to 1.0.9.5 Signed-off-by: Keith Packard commit 47bc9b2a39b7a8d3ef3fe8acc7fbf0512695e548 Author: Keith Packard Date: Mon May 28 11:47:28 2012 -0600 altos: Clear stm i2c transfer timeout alarm Signed-off-by: Keith Packard commit 8164cd95db62e4564b3a9ba5c06a74c870c03841 Author: Keith Packard Date: Mon May 28 11:46:51 2012 -0600 altos: Remove debug printf from accel auto-cal Otherwise, this goes way too slow Signed-off-by: Keith Packard commit ee61fb8ccb47f94b7c39e803f5a0248840d1eea6 Author: Keith Packard Date: Mon May 28 11:45:53 2012 -0600 altos: Clean up ADC selection for cc1111 Depend directly on product defines instead of trying to guess Signed-off-by: Keith Packard commit 2df9113a22f4f67707d9ee777bd6b23ff671b105 Author: Keith Packard Date: Mon May 28 11:45:30 2012 -0600 altos: All cc1111 products have a radio Signed-off-by: Keith Packard commit a53b8b84283eb62157b0f8ecd8061f61a4b6bd6f Author: Keith Packard Date: Mon May 28 11:44:45 2012 -0600 altos: Shrink telemetry generation code otherwise TM doesn't build anymore Signed-off-by: Keith Packard commit 43e558738c76afd72fc01660884be3158f44470d Author: Keith Packard Date: Mon May 28 11:44:07 2012 -0600 altos: Try to get hmc5883 working No joy yet Signed-off-by: Keith Packard commit 9f5e4cf7d8204016e023cf439d93de1203dc406e Author: Keith Packard Date: Sun May 27 18:23:39 2012 -0600 altos: Make teleterra v0.2 compile with new ao_data struct Signed-off-by: Keith Packard commit 5dd5e0284c8b26b0d4ce69c64bb7864e0ae83db7 Author: Keith Packard Date: Sun May 27 17:45:09 2012 -0600 altos: Make telepyro-v0.1 build with new ao_data struct Signed-off-by: Keith Packard commit 29edf6d901432a1afc65900ff599c963edac5a2b Author: Keith Packard Date: Sun May 27 17:44:01 2012 -0600 altos: Make telescience-v0.1 build with new ao_data struct Signed-off-by: Keith Packard commit 5fd869b244f8f2b76258dc31a5507a73fd47cf1d Author: Keith Packard Date: Sun May 27 17:31:12 2012 -0600 altos: Make telenano build with new ao_data structure Signed-off-by: Keith Packard commit 627b904b36e129ff2ead436a626699abfc3b3211 Author: Keith Packard Date: Sun May 27 17:29:27 2012 -0600 altos: Make stm-demo compile with new ao_data structure Signed-off-by: Keith Packard commit 090dc9aecdf4cfd1ac727325ae141d441c5b28aa Author: Keith Packard Date: Sun May 27 17:26:43 2012 -0600 altos: Make telemini-v1.0 compile with new ao_data structure Signed-off-by: Keith Packard commit 98e992b65d366d9f79d7d2dd2dd4d1886dd1d9c4 Author: Keith Packard Date: Sun May 27 17:25:17 2012 -0600 altos: Make telemetrum-v1.0 build with new ao_data structure Signed-off-by: Keith Packard commit ce8153472069ed56b24ac36f297ac569d1f767d4 Author: Keith Packard Date: Sun May 27 17:24:09 2012 -0600 altos: Make telemetrum-v1.1 compile with new ao_data structure Signed-off-by: Keith Packard commit ed635545e0b965901032ed2c3474ffe997c73de3 Author: Keith Packard Date: Sun May 27 16:52:45 2012 -0600 ignore pa to altitude conversion file Signed-off-by: Keith Packard commit dd73c9b441f7672fb9982c4caeb5178df30f5d2b Author: Keith Packard Date: Sun May 27 16:47:30 2012 -0600 altos: Split out mm-specific versions of sampling code Avoid breaking telemetrum (too much) by splitting this stuff apart. Signed-off-by: Keith Packard commit 9eeba439ce8c9dc1def8528f96b6a67c6578d656 Author: Keith Packard Date: Sun May 27 16:46:00 2012 -0600 altos: Don't start ADC ring until the other sensors have a valid value Yes, this is still an ugly kludge, but it's easy. Signed-off-by: Keith Packard commit d01c10eff4b70af13347969a7cece8730cf1a3f1 Author: Keith Packard Date: Sun May 27 16:44:38 2012 -0600 altos: Data packet tick count does not live in adc structure It was moved to the global structure. Having two is confusing. Signed-off-by: Keith Packard commit 78423f3fc5164ea9fd428606419784c1700ad5c5 Author: Keith Packard Date: Fri May 25 23:18:06 2012 -0600 Get megametrum ready to at least log flight data Doesn't track flight state changes correctly. Signed-off-by: Keith Packard commit 0239e4dfe587528524b6380bbf6d9583047e52d6 Author: Keith Packard Date: Fri May 18 21:23:47 2012 -0700 altos: Poll mpu6000 values every tick and stash them locally. Signed-off-by: Keith Packard commit 34bb17bc1a3d8a1c95b5e57f059e7a1747e17a03 Author: Keith Packard Date: Fri May 18 20:16:35 2012 -0700 altos: Finish ms5607 support This has the MS5607 polling once each tick for pressure and temperature and then saving that in a global variable. The command UI provides for dumping the prom data so that an eeprom file can have raw sensor data along with the conversion factors necessary to compute useful values. Signed-off-by: Keith Packard commit 5d8b9d524d6424ff98dcc4155fe8b8bd892b6d8f Author: Keith Packard Date: Fri May 18 20:04:57 2012 -0700 altos: Add conversion between Pa and meters To be used with the MS5607 which generates data in calibrated units. Signed-off-by: Keith Packard commit 1541fc0bde71f503b1ae5757497e9e1e6d023111 Author: Keith Packard Date: Mon May 7 23:14:57 2012 -0700 altos: Check MS5607 CRC. Clean up MS5607 API It's not ready for flight yet, but at least it's sensible now. Signed-off-by: Keith Packard commit 6a62edd4a1f01a6ee380c3aabaff3f437e8d6f1e Author: Keith Packard Date: Mon May 7 23:14:14 2012 -0700 altos: Conditional byte swapping in mpu6000 driver Only needed on LSB machines. Signed-off-by: Keith Packard commit 6a973f788563ccc66b01cc7557a004dabef18d09 Merge: d387f24 da2c920 Author: Bdale Garbee Date: Wed May 16 09:13:53 2012 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit d387f246b24502642b76aad04eb3e0f1a5b78a05 Author: Bdale Garbee Date: Wed May 16 09:09:44 2012 -0600 build-dep on default-jdk instead of openjdk-6-jdk, closes: #655580 commit da2c920b9f3378d5a18551e008c1da5dace1e0ef Author: Keith Packard Date: Mon May 7 21:53:53 2012 -0700 altosui: Try to make telem tick counts match eeprom telem files can have an extra wrap or two of tick count if they start recording a long time before the flight. Account for this so that the CSV file output from each have matching tick values. Signed-off-by: Keith Packard commit b5b898264077fcada29e73efa28dcbe4729f2709 Author: Keith Packard Date: Mon May 7 21:53:11 2012 -0700 altosui: Output recorded clock tick in CSV files This allows eeprom and telem files to be correlated accurately Signed-off-by: Keith Packard commit 73c26f39b1a08fcc13e23a5b1a4293bc7df9f163 Author: Keith Packard Date: Mon May 7 21:52:12 2012 -0700 altos: Hacking at cc1120 driver Still doesn't work, but this adds a ton more register definitions Signed-off-by: Keith Packard commit 318b564486aa9965bbad54c71e51fcb32b414162 Author: Keith Packard Date: Mon May 7 21:51:25 2012 -0700 altos: Get mpu6000 working This initializes the device appropraitely, and provides a command to dump the current values in converted form. Signed-off-by: Keith Packard commit af949c67eeb9dc310b1430d3435d241adccfc0a9 Author: Keith Packard Date: Mon May 7 21:50:26 2012 -0700 altos: stm: pass DMA buffer index to DMA completion callback This lets the user know which DMA has finished. Signed-off-by: Keith Packard commit dd7699cf8daded17ac41abf5c5170cfb599b6ff5 Author: Keith Packard Date: Mon May 7 21:49:24 2012 -0700 altos: stm: delay during USB config with pull-up off This makes sure that a reboot will reliably cause the device to disconnect from the USB bus. Signed-off-by: Keith Packard commit 744d05e6037ffc11688a9faa9c7b5dcda4065ee3 Author: Keith Packard Date: Mon May 7 21:47:17 2012 -0700 altos: stm: share i2c_stop code between send and recv This waits for the stop signal to appear on the bus, necessary before starting another transaction. Signed-off-by: Keith Packard commit ddaf501ddcfc1a5f74a1ef1b6b76e1c82d89c77a Author: Keith Packard Date: Sun May 6 23:54:13 2012 -0700 altos: stm i2c DMA for large recv appears to work Transaction appears to be clean on the i2c bus now; correct number of bytes received, and the nack and stop at the right time. This tests > 2 length reads; should try that too. Signed-off-by: Keith Packard commit fad6cda3d081d438b18305611f37fe05335aa372 Author: Keith Packard Date: Sun May 6 22:53:25 2012 -0700 altos: megametrum needs ao_mpu6000.h Signed-off-by: Keith Packard commit f66f5de7a6cae71948da777ad0638bc6267a710f Author: Keith Packard Date: Sun May 6 22:52:56 2012 -0700 altos: Switch megametrum compile to -Os Looks like gcc has compiler bugs with -O0 Signed-off-by: Keith Packard commit 0f0cc91ce8e9807dca48a5c0c53d821f5060e245 Author: Keith Packard Date: Sun May 6 22:47:33 2012 -0700 altos: STM i2c work. Start now driven by interrupts Send now done with DMA and interrupts Signed-off-by: Keith Packard commit 69feb1e3d94a028d04529edb015654bafd06353b Author: Keith Packard Date: Tue May 1 18:12:41 2012 -0700 ao-tools: Add GPS and rssi printing to ao-telem This prints all of the basic telemetrum messages now. Signed-off-by: Keith Packard commit 8b08095b3d41e21684a10bddfb54431019da5af6 Author: Keith Packard Date: Tue May 1 11:08:49 2012 -0700 altos: Report latest telemetry data, rather than using the oldest ao_sample_adc points to the *next* ADC entry, rather than the most recent one. Step back one entry to get the latest valid data. Signed-off-by: Keith Packard commit 7b0b6bcc40891d8dd106d091d3af8107b2941c66 Author: Keith Packard Date: Wed Apr 25 23:29:20 2012 -0700 altos: Add hmc5883 and mpu6000 drivers to megametrum build Signed-off-by: Keith Packard commit e0b8c614ec4d11f432963e48d94e4497d31a9ddc Author: Keith Packard Date: Wed Apr 25 23:27:58 2012 -0700 altos: Add mpu6000 and hmc5883 stubs No real drivers here yet, just some testing stubs Signed-off-by: Keith Packard commit 0266e08dbf19e2204fb5f758d5d0f944d2afff7d Author: Keith Packard Date: Wed Apr 25 23:26:57 2012 -0700 altos: Add STM I2C recv and stop funcs Recv doesn't appear to work with more than one byte Signed-off-by: Keith Packard commit 962476911aaab17fd482593a0e8b95fe47de2f29 Author: Keith Packard Date: Wed Apr 25 23:25:43 2012 -0700 altos: Oopsed the STM DMA channels for I2C1 TX is 6, RX is 7 Signed-off-by: Keith Packard commit 5f55d0490017faa19b8d70b1742e4a45266c7e79 Author: Keith Packard Date: Fri Apr 20 22:26:16 2012 -0500 altosui: Mac OS Lion Java default heap space is too small (Trac #37) Increase it to 512M in the Info.plist file. Signed-off-by: Keith Packard commit 1489263b895a2a825e29d0560c9b1dbba8a3f431 Author: Keith Packard Date: Tue Apr 17 11:01:18 2012 -0700 altos: Starting to write cc1120 driver This does "something" in radio test mode, appearing to generate a 730MHz signal. Signed-off-by: Keith Packard commit cc305ea231ae22278abf91c0d9925f5992945369 Author: Keith Packard Date: Sat Apr 14 13:53:36 2012 -0700 altosui: Add apogee lockout configuration Provide suggested values of 5/10/15/20 seconds. Signed-off-by: Keith Packard commit b4ab9f5dfa9f2a50e0528acf0a1fdeaa1f9bc523 Author: Keith Packard Date: Sat Apr 14 13:52:37 2012 -0700 altosui: Read frequency from device while configuring ground station Missed this when adding the TD config UI. Signed-off-by: Keith Packard commit 5c8af6d35ebfc8fd896dfbf9928ec8f9dbfa531f Author: Keith Packard Date: Sat Apr 14 12:05:28 2012 -0700 altos: Remove debug printf from cc1111 check-stack script Signed-off-by: Keith Packard commit 6cb744e305116a738b5d71686c6748f6f08c12ea Author: Keith Packard Date: Sat Apr 14 12:02:14 2012 -0700 altos: Respect apogee lockout time in flight algorithm This prevents any apogee detection from occurring until the specified number of seconds after boost. This also prevents the switch from accel+baro to baro only mode in the Kalman filter. The test frame work is also changed to look for Apogee lockout: in the eeprom input file. Signed-off-by: Keith Packard commit 9a8fec1b6d8f3346f988882ffb03d7d0e45b3c81 Author: Keith Packard Date: Sat Apr 14 12:00:32 2012 -0700 altos: Clean up test scripts The flight test scripts were using invalid bash syntax. Clean that up and also switch the default flight directory to my new ~/misc/rockets/flights directory. Signed-off-by: Keith Packard commit e9f6fca7cfe796cbd86ae9d8f1ebe31bba7251db Author: Keith Packard Date: Fri Apr 13 18:38:29 2012 -0700 altos: Correct STM USB driver Configure endpoint registers correctly now. Restructure code to make sure we send the right IN packets. Signed-off-by: Keith Packard commit 1a84d34fa08f43a5f79b1a5f8d8de7674d04647d Author: Keith Packard Date: Fri Apr 13 18:35:46 2012 -0700 altos: Check all USE_SERIAL_*_STDIO when computing AO_NUM_STDIOS AO_NUM_STDIOS is allocated based on the total number of possible stdio values. Now that multiple serial stdio are possible, make sure to check all of them. Signed-off-by: Keith Packard commit 3c67543f3e5fddc6a8850f33ac519ccd55b607f0 Author: Keith Packard Date: Fri Apr 13 18:34:52 2012 -0700 altos: Set USB Interrupt endpoint interval to maximum allowed We don't ever send anything over this channel, so there's no sense asking the host to poll it very often. Signed-off-by: Keith Packard commit 0667261e03b3fd403e97d02ea6204b007bb13f58 Author: Keith Packard Date: Fri Apr 13 09:39:20 2012 -0700 altos: Pull more interfaces out of ao.h and move to separate files This moves the aes, btm, companion, lcd and packet interfaces out of ao.h Signed-off-by: Keith Packard commit 2b4a53342980618b193cbee5b803e56f7c937893 Author: Keith Packard Date: Fri Apr 13 09:36:00 2012 -0700 altos: ao_telelaunch.c got left in src directory Should live in product/ao_telelaunch.c Signed-off-by: Keith Packard commit 040a6eb119451026e1ec7c3a6a8e76b439c632d5 Author: Keith Packard Date: Thu Apr 12 14:51:07 2012 -0700 altos: Massive product config cleanup Support multiple serial ports more cleanly Split out parts of ao.h into separate feature header files Signed-off-by: Keith Packard commit f952f9c285e2718a433c8c720c9b5d9c369e7036 Author: Keith Packard Date: Thu Apr 12 14:50:12 2012 -0700 altos: Start adding apogee lockout support Remove radio channel support too. Signed-off-by: Keith Packard commit 6d1606895f70c6bca20c25084107f90bd0b613ec Author: Keith Packard Date: Wed Apr 11 23:31:28 2012 -0700 altos: Switch stm-demo to HSE clock, add USB Requires that SB17 be soldered shut so that the MCO from the STlink CPU is available the target for HSE input. Signed-off-by: Keith Packard commit 49ac2828510e8b5fcba7e31631dac0580a455011 Author: Keith Packard Date: Wed Apr 11 23:30:13 2012 -0700 altos: Rework how STM clocks are initialized. Clean all of the RCC configuration up after turning on the clocks. Use the MSI clock during initialization to avoid messing around with the HSI clock temporarily. Allow for an external clock on the HSE line. Signed-off-by: Keith Packard commit 93ef7e4a23d13540615f1a9782e1d58ddb7f258e Author: Keith Packard Date: Wed Apr 11 23:29:38 2012 -0700 altos: Use new USB driver in megametrum-v0.1 product Signed-off-by: Keith Packard commit d432307a3c2709634350eaa1262b935028d073d3 Author: Keith Packard Date: Wed Apr 11 23:28:45 2012 -0700 altos: Add STM USB driver Emulates the usual CDC-ACM device Signed-off-by: Keith Packard commit afd52a8b54fe31577d939a161ea9cf5ad48e3a43 Author: Keith Packard Date: Wed Apr 11 23:26:30 2012 -0700 altos: Add STM ao_arch_reboot implementation Uses the AIRCR register to force a reset Signed-off-by: Keith Packard commit 150881f86f8d90b5867507889441990d18223e62 Author: Keith Packard Date: Wed Apr 11 23:25:36 2012 -0700 altos: Add register definitions for STM syscfg and usb Signed-off-by: Keith Packard commit 0dd9e1dd62656a931f9559af6da9131f704f83f9 Author: Keith Packard Date: Mon Apr 9 23:27:43 2012 -0700 altos: Add support for multiple SPI busses and sharing device drivers The STM32L151 has several SPI busses, and we want to use more than one, so add a 'bus' parameter to the SPI interfaces. To avoid wasting time on AVR and CC1111 processors which only use one SPI bus, elide those parameters from the actual functions by wrapping them with macros. Configuring chip select is now all macroized so that each chip can have its own version, allowing the STM to share the various SPI device drivers with the cc1111 and avr processors. Note that only the M25 driver has been ported; porting the others is 'trivial', but not necessary at this point. Signed-off-by: Keith Packard commit 35e3c47da895bdd868b9b66b98bca64bd82db862 Author: Keith Packard Date: Mon Apr 9 22:25:59 2012 -0700 altos: make megametrum beeper test keep beeping Used to measure the beep frequency. Signed-off-by: Keith Packard commit 9804528e249db256e020d4b5340ba6216d3474f0 Author: Keith Packard Date: Mon Apr 9 22:25:13 2012 -0700 altos: Check for cc1111 flash overflow The linker is supposed to do this, but it ignores the static initializer data added after the code. Signed-off-by: Keith Packard commit d15c4976ed9c23c861e620eb9c429d1cb7eedbee Author: Keith Packard Date: Mon Apr 9 22:24:36 2012 -0700 altos: Increase STM SPI speed to PCLK/4 The pressure sensor seems happy at this speed. Signed-off-by: Keith Packard commit 0cd682ef0c8cdcf364b7e173ff3a9f84e485c113 Author: Keith Packard Date: Mon Apr 9 22:23:52 2012 -0700 altos: Move MS5607 configuration to ao_pins.h Which SPI port and where chip select is to be found are product specific. Signed-off-by: Keith Packard commit 3909fca0a3f918121888a415f9bf9bca99505366 Author: Keith Packard Date: Mon Apr 9 22:22:58 2012 -0700 altos: Add missing parens in ao_ms5607.h Signed-off-by: Keith Packard commit c5bbfc7244faaae41c7b581644c3c253e9b7f462 Author: Keith Packard Date: Mon Apr 9 22:21:46 2012 -0700 altos: Reduce MS5607 reset delay, increase conversion delay Reset doesn't take very long, while doing a conversion seems to take more than 10ms. Signed-off-by: Keith Packard commit 51aef5d4fc29986353ad887f4a67ed2fe35f8c8e Author: Keith Packard Date: Mon Apr 9 22:17:33 2012 -0700 altos: Make STM clock configuration per-product. Fix 32MHz CPU speed This moves all of the STM clock configuration into ao_pins.h so that each product can configure it separately. While doing this, I discovered that the flash memory mode (64-bit, prefetch, latency 1) wasn't actually getting set, which is why the CPU refused to work at 32MHz. Signed-off-by: Keith Packard commit 1dcfbb05531767e67df45c2799a2fe533834fb71 Author: Keith Packard Date: Mon Apr 9 20:28:19 2012 -0700 altos: Add beeper driver to STM arch Drives the MegaMetrum beeper Signed-off-by: Keith Packard commit 67044cca5b463772491d0712d0ce07a8f897a476 Author: Keith Packard Date: Mon Apr 9 00:10:43 2012 -0700 altos: Test I2C code on discovery board. Signed-off-by: Keith Packard commit 0a198dfcd1b0defe194feaf301f4586e5573d6e9 Author: Keith Packard Date: Mon Apr 9 00:10:01 2012 -0700 altos: ARM -O0 flag appears to generate buggy code Use -Os always, which is annoying... Signed-off-by: Keith Packard commit 597c3df668ccf656d8c014f665c154a03166577c Author: Keith Packard Date: Mon Apr 9 00:09:18 2012 -0700 altos: Make ms5607 driver do something It's loading prom values and converting sensor data, but it's getting the wrong answer at present. Signed-off-by: Keith Packard commit e9362841b1075a2ae59eecc73137b20e700567a8 Author: Keith Packard Date: Mon Apr 9 00:08:20 2012 -0700 altos: add STM I2C driver. Not well tested yet... Signed-off-by: Keith Packard commit e027247a9ef82746c26bcb8d0a851a0fa06511de Author: Keith Packard Date: Mon Apr 9 00:06:35 2012 -0700 altos: Slow STM SPI down a bit so the MS5607 returns values It's still not working right, but at least it returns something other than all zeros... Signed-off-by: Keith Packard commit 059f09dbca4703c25b42389b54c6510331c39485 Author: Keith Packard Date: Mon Apr 9 00:05:18 2012 -0700 altos: Allow STM DMA channels to be reserved for one use This allows a single user of a DMA channel to reserve it for use without needing to lock the mutex; this is required for DMA from the ADC to work on megametrum as it wants to start DMA from an interrupt handler, which cannot block on a mutex. Signed-off-by: Keith Packard commit f7cfbbce2b94b5ac0094a0e34e1766fe1ceb12c8 Author: Keith Packard Date: Sat Apr 7 20:35:17 2012 -0700 altos: Show temperature in stm-demo Use the ADC to show current temperature Signed-off-by: Keith Packard commit 98aa481741b8fbc617545beda3d295b53de90716 Author: Keith Packard Date: Sat Apr 7 20:33:27 2012 -0700 altos: Use 384 cycle ADC sample time This is plenty fast, and provides nice stable readings. Signed-off-by: Keith Packard commit 0bce68e6a0abc19f49c573331164d13643c9bee5 Author: Keith Packard Date: Sat Apr 7 20:31:58 2012 -0700 altos: Add STM temperature sensor calibration data Each stm32l has two-point factory temperature calibration data. Provide access to that for displaying temperature data. Signed-off-by: Keith Packard commit a41628c97e90770890cce1d6f580e92c1cad1a7f Author: Keith Packard Date: Sat Apr 7 18:55:53 2012 -0700 altos: Add ADC support to megametrum firmware Measures all MM igniter and battery voltages. Signed-off-by: Keith Packard commit 9b9357f48597a034211affb3f18fc6089816456d Author: Keith Packard Date: Sat Apr 7 18:55:20 2012 -0700 altos: Add ADC tests to stm-demo Signed-off-by: Keith Packard commit b5e9d14b4e3e8f29ad8a7bb9b339890be4bcfa2f Author: Keith Packard Date: Sat Apr 7 18:54:32 2012 -0700 altos: STM SPI is not using interrupts itself All SPI transfers are done via DMA, so the DMA interrupts suffice. Signed-off-by: Keith Packard commit 5e41d1e03680af9806c599aad80b9b64dd719f9b Author: Keith Packard Date: Sat Apr 7 18:53:12 2012 -0700 altos: Add support for STM ADC DMA-based driver for the STM analog to digital converter. Signed-off-by: Keith Packard commit fa96ee3db9b57cc2a88e9edd74bb9efcc228ccf3 Author: Keith Packard Date: Sat Apr 7 18:44:11 2012 -0700 altosui: remove debug printf from AltosFlightStats Signed-off-by: Keith Packard commit e56038b65ba1c6413ba9942be3c092644986f126 Author: Keith Packard Date: Sat Apr 7 18:36:36 2012 -0700 altosui: When computing flight stats, auto-detect boost time Detect when boost actually starts by looking for the last low acceleration value before the recorded boost time. This improves the computation of the boost state data. Signed-off-by: Keith Packard commit 20066268d8d1853055d0afe108584db34b425fcb Author: Keith Packard Date: Sat Apr 7 18:35:26 2012 -0700 altosui: Integrate accel speed from very start of eeprom record Don't wait for the flight computer to have detected boost--that's often several samples after boost actually occurred, which can leave a bunch of acceleration out of the speed computation. Signed-off-by: Keith Packard commit d35c4df12a3d8e2dab5d41f8d918ff4237f91e46 Author: Keith Packard Date: Sat Apr 7 01:01:33 2012 -0700 altos: Add ability to change radio frequency in TeleTerra Provide a way to set the frequency locally. Signed-off-by: Keith Packard commit 4700f63937786e8f6e9b4882363234a33eb54c46 Author: Keith Packard Date: Sat Apr 7 01:01:06 2012 -0700 altos: Make ao_config_set_radio public Allows other bits of code to reset the radio parameters. Signed-off-by: Keith Packard commit a0a650a2be007b0436bd527d6c18f36eef6fbe2b Author: Keith Packard Date: Sat Apr 7 00:25:50 2012 -0700 altos: Force radio channel to zero when setting frequency Otherwise, the actual radio frequency will include the channel offset, which is not useful. Signed-off-by: Keith Packard commit c7119405a3dd7128120374a2a001bc98ef523619 Author: Keith Packard Date: Sat Apr 7 00:25:26 2012 -0700 altos: Make ao_freq_to_set reentrant Save a bunch of data space this way. Signed-off-by: Keith Packard commit d0d0d20c20e5eeacbc9a1ec1c93141a2044830fb Author: Keith Packard Date: Sat Apr 7 00:24:59 2012 -0700 altos: Shorten help strings Save a bit of code space Signed-off-by: Keith Packard commit 8405efb6ca68c8216413b94e7acbdf51af00554a Author: Keith Packard Date: Sat Apr 7 00:23:55 2012 -0700 altos: Save memory in ao_config.c Shorten help messages. Stop setting aes_key on products not using aes key. Signed-off-by: Keith Packard commit 41a8383ccd29351f3a88a374f9456d6efb71b9a0 Author: Keith Packard Date: Sat Apr 7 00:22:41 2012 -0700 altos: Save memory in ao_cmd.c Shrink a couple of help strings move a variable in ao_cmd from data to pdata. Signed-off-by: Keith Packard commit 5f63065a16b65618b39314880c72074f0a8b5550 Author: Keith Packard Date: Sat Apr 7 00:22:02 2012 -0700 altos: Add fake install/uninstall targets for stm-bringup Keep global 'make install' from failing. Signed-off-by: Keith Packard commit 5569e4df50648a3ec131ba5e244da9b67d1a67db Author: Keith Packard Date: Sat Apr 7 00:21:03 2012 -0700 altosui: Radio channel gets set to zero by altos when frequency is set Just remember what the channe is going to get set to. Signed-off-by: Keith Packard commit 2db6b0f58811ffc44a468c8fbcacc08d37edd26c Author: Keith Packard Date: Fri Apr 6 22:40:49 2012 -0700 altos: Shuffle stm-demo SPI test code around a bit Move a debug printf beyond the chip select boundary to allow for more accurate timing. Send four bytes instead of just one. Signed-off-by: Keith Packard commit 89201cdf2062b7319a0da4e266e4d6edba1493f8 Author: Keith Packard Date: Fri Apr 6 22:40:17 2012 -0700 altos: Declare stm DMA address registers as volatile void * Eliminates a cast when assigning to them. Signed-off-by: Keith Packard commit 0bcc23c3be1a20a362fea268901c600f9f0d287a Author: Keith Packard Date: Fri Apr 6 22:39:45 2012 -0700 altos: Disable DMA unit when idle Should save a bit of power Signed-off-by: Keith Packard commit 20926b62a87154a846cb950dc542c737cd54826d Author: Keith Packard Date: Fri Apr 6 22:39:12 2012 -0700 altos: Disable STM SPI transceiver when idle Should save a bit of power. Signed-off-by: Keith Packard commit 9b12bc445fe482306e4587ad60c6d2daf65a60f3 Author: Keith Packard Date: Fri Apr 6 18:07:07 2012 -0700 altos: Add DMA, SPI and MS5607 drivers Signed-off-by: Keith Packard commit 2a04ac8dff1bfc3efba8c7e4dc9c1a827496dbdf Author: Keith Packard Date: Mon Apr 2 23:00:29 2012 -0700 altos: megametrum builds an ELF file, not an IHX file Name it appropriately. Signed-off-by: Keith Packard commit cf1e4d60e1fcd75fa734365a2666ea8930938128 Author: Keith Packard Date: Mon Apr 2 22:58:54 2012 -0700 altos: Move SPI functions to architecture-specific location Some architecture specific stuff needs to use core altos code, so create new ao_arch_funcs.h files per architecture that get pulled in at the end of ao.h Signed-off-by: Keith Packard commit c09d155328bd446bb84ac1068d380cceb884df22 Author: Keith Packard Date: Mon Apr 2 19:27:53 2012 -0700 altos: Oops. Set per-USART STM baud rate register instead of usart1 Was accidentally always setting usart1 instead of the per-usart register. Didn't work too well for other usarts... Signed-off-by: Keith Packard commit 440226df03a85cd0047d876b57b2a3410bfb2b02 Author: Bdale Garbee Date: Sat Mar 31 17:53:25 2012 -0600 be explicit in a couple places about only using single-cell LiPo batteries commit 4ca52908c8b3f98a79588981f6878025250f0924 Author: Bdale Garbee Date: Sat Mar 31 16:43:39 2012 -0600 use explicit path not $(HOME) to find ARM toolchain for now commit 246618baf9b8803e5ae4e650eb46740d1128a010 Author: Bdale Garbee Date: Sat Mar 31 16:43:11 2012 -0600 add config file for gdb use with MegaMetrum via Olimex dongle commit b89f11139fae7ae722ed78d342a169ed2bf5c948 Author: Keith Packard Date: Sat Mar 31 12:44:14 2012 -0700 Build megametrum-v0.1 by default commit bbf31b8591f89e2a1fcc7dac5f42d730a81473d2 Author: Keith Packard Date: Sat Mar 31 12:43:58 2012 -0700 altos: Add stub cc1120 driver Signed-off-by: Keith Packard commit 1f2b75518169c4f2da9762de46bf1d9a71a04d17 Author: Keith Packard Date: Wed Mar 28 21:54:32 2012 -0700 altos: Move cc1111 DMA engine interface to cc1111/ao_arch.h from ao.h It's hardware specific Signed-off-by: Keith Packard commit 47a9925f16f6a13b173c49d3873d91fc7cf6d46e Author: Keith Packard Date: Wed Mar 28 21:53:30 2012 -0700 altos: Move cc1111 AES driver to cc1111 directory Signed-off-by: Keith Packard commit 93ae5f6ce09fa71ebd34f77a884684b3670c8b44 Author: Bdale Garbee Date: Sat Mar 31 13:29:15 2012 -0600 openocd config file for MegaMetrum commit b711768da6310a1b06f3b995a280587fed5f26cd Author: Keith Packard Date: Wed Mar 28 21:45:44 2012 -0700 Bump version to 1.0.9.4 Signed-off-by: Keith Packard commit 0993595035a2813deba6991fa25bc0d475f2e6bb Author: Keith Packard Date: Wed Mar 28 21:45:02 2012 -0700 altos: Add ao_freq.c to megametrum build I think this will be needed to compute radio settings on the cc1120 Signed-off-by: Keith Packard commit a157edbe1bf7fffd5a6041f7b1760674addd2229 Author: Keith Packard Date: Sun Mar 25 13:08:05 2012 -0700 stm-demo does not use altitude.h commit c1531fb26461b9f4ec39672bbfaeb70e6f4d1056 Author: Keith Packard Date: Fri Mar 23 01:42:32 2012 -0700 Use -Os for STM apps. Fix altos.ld to matchall .rodata* sections Without .rodata*, it would stick the flash copy of the data on top of any further .rodata* sections. Fortunately, the linker catches that and complains... Signed-off-by: Keith Packard commit f2c110fb4531144f18f62200e4127738c84e87f1 Author: Keith Packard Date: Fri Mar 23 00:55:53 2012 -0700 Get config stuff hooked up for MegaMetrum This stubs out enough stuff to let ao_config link and work Signed-off-by: Keith Packard commit 0bda768c2be5b81bec13f21d4d3bb6a11a8e88fa Author: Keith Packard Date: Fri Mar 23 00:43:47 2012 -0700 Add preliminary MegaMetrum v0.1 support This turns on an LED, enables the internal R/C clock, hooks USART3 to the GPS chip and USART1 to the console. Signed-off-by: Keith Packard commit c27e211796a64b6bbacfe6a1516e9872fdb0853e Author: Keith Packard Date: Fri Mar 23 00:43:17 2012 -0700 Use new Makefile.defs in stm-demo Signed-off-by: Keith Packard commit d7ddfd4e6d75e50ca64a342181f5c52e9f4919af Author: Keith Packard Date: Fri Mar 23 00:42:13 2012 -0700 Use 16-bits for STM32 LED mask. Export serial I/O functions Signed-off-by: Keith Packard commit 606d866153cb639a2400cbedbc45046372ad1b30 Author: Keith Packard Date: Fri Mar 23 00:40:48 2012 -0700 Allow skytraq to be on non-default serial port Provide ao_gps_getchar, ao_gps_putchar and ao_gps_set_speed hooks to let product specify functions for serial access. Signed-off-by: Keith Packard commit 25184baa36c20e3d661f94e642a33e8aae179d60 Author: Keith Packard Date: Fri Mar 23 00:40:09 2012 -0700 Allow for more than 8 LEDs Provide hook for architecture-specific LED mask (AO_LED_TYPE) Signed-off-by: Keith Packard commit 87ca5c9c5f9cea1b9e14468e4694ce6acc21955a Author: Keith Packard Date: Fri Mar 23 00:19:06 2012 -0700 Clean up STM build by moving common defs to Makefile.defs Shortens default Makefile a bit Signed-off-by: Keith Packard commit 41a3fded116a3101789df44647d0eb06be07a25b Author: Keith Packard Date: Fri Mar 23 00:04:47 2012 -0700 Make stm-demo display a scrolling message Instead of trying to frob the LEDs, which are now owned by the serial port. Signed-off-by: Keith Packard commit 9b5e98a3407b369803109bfc1409e4f8b6e848ba Author: Keith Packard Date: Fri Mar 23 00:04:21 2012 -0700 Flush LCD changes each time the text is updated Rather than requiring the caller to do it. Signed-off-by: Keith Packard commit 6337b5f522be11926a6490d7bb27a4f7795da569 Author: Keith Packard Date: Fri Mar 23 00:03:29 2012 -0700 Automatically set ALTERNATE pin mode when setting alternate function When selecting an alternate function, set the pin to alternate mode as well; there's no sense requiring two separate calls everywhere. Signed-off-by: Keith Packard commit c9e61a4f1f0ce5e5177a2252e8b7a02a578e77f1 Author: Keith Packard Date: Fri Mar 23 00:02:38 2012 -0700 Allow any STM usart to be used for stdio This also adds the alternate pin configurations for the other two usarts Signed-off-by: Keith Packard commit bf060b3e3ed655bbb8464f342d0a0b1745a06173 Author: Keith Packard Date: Fri Mar 23 00:01:50 2012 -0700 Allow for more than one serial port in core AltOS Signed-off-by: Keith Packard commit d236a5c7cd6e9b1d7192e801d63b4bd348cc2f12 Author: Keith Packard Date: Thu Mar 22 20:02:30 2012 -0700 Move LCD string output code to ao_lcd_font.c It's all very specific to the 14-segment display, so stick it there. Signed-off-by: Keith Packard commit 6da2f5846f2d28ea1f09f60ef2cc3f68113ac62a Author: Keith Packard Date: Thu Mar 22 19:43:29 2012 -0700 Add LCD device driver to STM32L port This enables the 6-digit 14-character display on the STM32L discovery board and provides an ascii output to it. Signed-off-by: Keith Packard commit a953ac32033ded18adf0cb3ca20134385fcd0a6d Author: Keith Packard Date: Thu Mar 22 19:42:18 2012 -0700 Add defines for LCD controller and RTC clocking Signed-off-by: Keith Packard commit f6e557bc2f0bd6d4272ed00dd09554d27a83be89 Author: Keith Packard Date: Thu Mar 22 19:41:23 2012 -0700 Actually enable usarts with the new usart code And move USART1 to PB6/PB7 to avoid conflicting with the LCD pins. Signed-off-by: Keith Packard commit 03fbc18ea17a9e77a1d4d8e0ddb97abbe5da3658 Author: Keith Packard Date: Wed Mar 21 16:24:06 2012 -0700 Clean up multiple serial port support for STM32L Signed-off-by: Keith Packard commit f560c961ae4fedec0c9f11d5b3635fcb0d67ed8e Author: Keith Packard Date: Wed Mar 21 16:18:26 2012 -0700 Add support for multiple serial ports on STM32L Signed-off-by: Keith Packard commit faf2bea4fdb3dca7fbed35423a4fe4459ee92ceb Author: Keith Packard Date: Mon Mar 19 11:25:40 2012 -0700 Save/restore PRIMASK register on Cortex-M3 This preserves the interrupt-enabled bit across context switches Signed-off-by: Keith Packard commit 6a14bee42a8431c909bcd74b0acec57329bc0284 Author: Keith Packard Date: Mon Mar 19 11:24:43 2012 -0700 Don't disable interrupts before saving interrupt flag on AVR This ignores the interrupt disabled state, so we'd always leave ao_yield with interrupts disabled. Signed-off-by: Keith Packard commit 7662a0096a860cddac413a310305fe842830c3b5 Author: Keith Packard Date: Sun Mar 18 22:29:51 2012 -0700 Add .gitignore file to stm-bringup Ignore generated binaries Signed-off-by: Keith Packard commit 4be74ef0d13114707fd8217907a5ec457f886160 Author: Keith Packard Date: Sun Mar 18 22:26:43 2012 -0700 Fix STM LED driver and blink LEDs on discovery board This adds a task to blink the LEDs, after first fixing up the LED output code to enable the GPIO and talk to the right pins for the discovery board. Signed-off-by: Keith Packard commit ab6ea9043b592c25948a70b6204d613756a9a250 Author: Keith Packard Date: Sun Mar 18 22:10:02 2012 -0700 Basic OS running on STM32L This gets stm-demo working Signed-off-by: Keith Packard commit 0cc01d378ae96325e429ad608b953661582939b0 Author: Keith Packard Date: Sun Mar 18 22:09:20 2012 -0700 Add AO_PANIC_STACK Provide a panic code for stack overflow. Signed-off-by: Keith Packard commit 1ca46760cf903860dccb4864578558a1abb6e0fa Author: Keith Packard Date: Sun Mar 18 22:08:48 2012 -0700 When debugging, send ao_panic message to ao_debug_out Use the low-level debug hooks to get the panic state sent to the serial port. Signed-off-by: Keith Packard commit 4bfce11873f34af9621c60f83a8355f85769f6d3 Author: Keith Packard Date: Sun Mar 18 22:07:07 2012 -0700 When debugging, send pre-init output to ao_debug_out Before tasking is running, send output to ao_debug_out to help debug system initialization. Signed-off-by: Keith Packard commit 93481fd3d9305a107b88c8a64de4194a6d94dc0e Author: Keith Packard Date: Sun Mar 18 22:05:46 2012 -0700 Incorrect type in ao_task_info for wchan Would truncate 32-bit pointers on arm. Signed-off-by: Keith Packard commit 8ba5344514f8ed51f6fd69ca09f6c7035c4fd0da Author: Keith Packard Date: Sat Mar 17 00:06:59 2012 -0700 Add stm-demo program This runs AltOS and talks over the serial port. Signed-off-by: Keith Packard commit 1d1b24bb20dec09145fbaa6fe6897898d47dd16e Author: Keith Packard Date: Fri Mar 16 20:24:29 2012 -0700 These were moved to the src/stm directory Signed-off-by: Keith Packard commit b8100ea5042013bb4eed67907b4e9d4e5c196df2 Author: Keith Packard Date: Fri Mar 16 20:23:31 2012 -0700 Add stm bringup timers and move most of the setup code to the stm dir Signed-off-by: Keith Packard commit 9279fd42793123784ce83ca151df6f4630487722 Author: Keith Packard Date: Fri Mar 16 20:21:09 2012 -0700 Add STM platform and stm-bringup demo program The stm-bringup doesn't run altos, it just initializes the device and writes stuff over a serial port. Works on the STM32L Discovery board at least, should do stuff on other boards too. Signed-off-by: Keith Packard commit e2f13aa43ba79becbff6c9bfc18c665a58d96185 Author: Keith Packard Date: Fri Mar 16 14:25:37 2012 -0700 Add example STM32L programs This loads to flash and sends data over the serial link. Signed-off-by: Keith Packard commit 3c7d1f6cfffb43299041f2850a48177f4e9b83a5 Author: Keith Packard Date: Wed Feb 22 23:26:03 2012 +1300 'stdin' is a special name in some compiler environments, don't use it. Switch to 'in' in the prototype for altos_serial_set_stdin. Signed-off-by: Keith Packard commit bdfcc9112c41c494de23594963980a730b625cc4 Author: Keith Packard Date: Wed Mar 28 00:49:29 2012 -0700 altosui: Disable launch controller button The launch controller should just be a separate program. Signed-off-by: Keith Packard commit cf1e95810559584705d0b8a787375938c68e07c6 Author: Keith Packard Date: Wed Mar 28 00:37:52 2012 -0700 altosui: Add Configure Ground Station dialog (trac #29) Allows the user to configure the teledongle frequency without opening up the flight monitor window, and also shows the teledongle fixed values like radio calibration, serial number and software version. Signed-off-by: Keith Packard commit d60862fce6ac27a97ad6337eea32a4b48645d158 Author: Keith Packard Date: Wed Mar 28 00:38:37 2012 -0700 altos: Make sure config values are loaded in 'c s' command ao_config_get may not have been called when ao_config_show is invoked by the user, so make sure the config values are loaded before showing uninitialized data. Signed-off-by: Keith Packard commit b98f75dbcccd40c8cbf32c3bfd21bd6f5648b861 Author: Keith Packard Date: Tue Mar 27 22:54:17 2012 -0700 altosui: Sanity check values from device configuration If someone has down-graded and re up-graded the firmware, the config entries may be garbage. Sanity check them to avoid crashing the UI. Signed-off-by: Keith Packard commit b6c7ae2c1f8cba7351cd139c49322280d9d3af47 Author: Keith Packard Date: Tue Mar 27 22:53:08 2012 -0700 altos: Reset config version if it's too large as well Any future config values will get trashed if we down grade the firmware, so we must reset the firmware version whenever it gets written. Signed-off-by: Keith Packard commit 3f0379db7067eaf104892a82b9c49142087adece Author: Keith Packard Date: Tue Mar 27 22:02:13 2012 -0700 altosui: Make 'monitor idle' work with older TeleMetrum firmware (trac #28) Older TM firmware did not have the 'done' line at the end of the GPS report, rather it would just stop after showing the Flags value. Check the TM version and stop looking for GPS data when the Flags line appears. Signed-off-by: Keith Packard commit 7a9baabaf33db5e30eb4ef8f923a4fd96fd28fb4 Author: Keith Packard Date: Tue Mar 27 21:49:58 2012 -0700 altosui: Mark data 'Age' in monitor idle UI too Just like with the flight monitor UI, it's nice to know how old the data in the monitor idle UI is, in case the data link to the TM isn't reliable. Signed-off-by: Keith Packard commit 2f19f9a0eaba22789fdc07a52849e8aaf6fe4695 Author: Keith Packard Date: Tue Mar 27 21:48:43 2012 -0700 altosui: Catch attempt to set radio frequency to 0.0 -- use default Monitor idle was setting the frequency to 0, which takes a while with the new native radio frequency setting code. Don't do that, instead pull out the preferred frequency for that, as is done in other places where a frequency of 0.0 is used. Signed-off-by: Keith Packard commit 170510bb183715e9ba580b180f20657d6602644e Author: Keith Packard Date: Tue Mar 27 21:13:31 2012 -0700 altosui: Find actual landing time when computing stats (trac #23) Look for the last time the height went from >10m to <2m from the nominal landing altitude and use that as the landing time when computing things like main descent speed, time under main etc. Signed-off-by: Keith Packard commit 0952224c36eba25db34bd147d2d579c66b15bbf8 Author: Keith Packard Date: Tue Mar 27 18:24:51 2012 -0700 altosui: Change flight data saving UI to separate download/delete selections First pop up a dialog to select flights for download. Download them. Then, after that, pop up a *new* dialog to select flights for delete. Offer to delete all of the downloaded flights by default. Then delete the flights. Signed-off-by: Keith Packard commit 7dd1d62676c1e605fe69a4c0acfe7638c6b79aa5 Author: Keith Packard Date: Tue Mar 27 18:19:05 2012 -0700 altos: Optimize ao_freq_to_set a bit Reduces size from 327 bytes to 287 bytes Signed-off-by: Keith Packard commit d77a4ea206d627635159f35c76c744687d4e633b Author: Keith Packard Date: Tue Mar 27 11:58:39 2012 -0700 altosui: Show only supported telemetry version Make it clear in the UI which telemetry versions are supported, providing the combobox only for new firmware which supports all versions. Signed-off-by: Keith Packard commit d8ebb83e64d66fa159e75aa560d39d80bb6d9d04 Author: Keith Packard Date: Tue Mar 27 10:38:32 2012 -0700 altosui: Configure radio with new direct frequency setting Instead of computing the radio setting in altosui, let the radio do it directly. Signed-off-by: Keith Packard commit c1d12a117b36de7fe8dd992959b890bfd1163e81 Author: Keith Packard Date: Mon Mar 26 23:35:35 2012 -0700 Do radio settings solely by frequency Compute the radio setting needed based on the calibration value provided and the requested frequency. Signed-off-by: Keith Packard commit c2550d72aee371676d2f09316051567681e53a7c Author: Keith Packard Date: Mon Mar 26 22:05:04 2012 -0700 altosui: Use ConcurrentHashMap for maps This data structure is accessed by multiple threads, so it needs to be re-entrant. Signed-off-by: Keith Packard commit 8610fdae8f47e1e8b6e8525227cc912664ecfafd Author: Keith Packard Date: Mon Mar 26 22:04:13 2012 -0700 altosui: Show time since last packet in flight status window Makes it easy to see when the UI is wedged, and when telemetry data are being successfully received. Signed-off-by: Keith Packard commit 392a3107b9e9cc8c1ea51df6ff5ec54817adbc65 Author: Keith Packard Date: Mon Mar 26 20:11:34 2012 -0700 altosui: Restructure telemetry classes to be more sane * Make AltosTelemetryRecord be a class, rather than an interface. * Inherit from this for AltosTelemetryRecordLegacy and AltosTelemetryRecordRaw. * Remove bogus AltosTelemetryRecordGeneral class. Signed-off-by: Keith Packard commit 77639dae0fb9975219c2e211ea6dd6c7965eeea2 Author: Keith Packard Date: Tue Sep 27 23:50:43 2011 -0700 altos: Require callsign match in packet code Ignore packets with mismatching callsigns to avoid accidental connections between devices controlled by different stations. As a special case, if the device is configured with the default callsign (N0CALL), then let anyone connect. This allows configuration of new devices without needing to change the ground station callsign. Signed-off-by: Keith Packard commit 1b4a4c7b6a0c3f93267f33482f490e7aa25c2158 Author: Keith Packard Date: Fri Jan 13 10:40:30 2012 -0800 doc: Add companion SPI message protocol doc Signed-off-by: Keith Packard commit 5d42ded7ebdb0c134c8dac61f41525c37d81ae61 Author: Bdale Garbee Date: Fri Jan 13 10:44:23 2012 -0700 update turnon_telemetrum to v1.2, add more turnon scripts commit f450f8bc70f857053b26c4379f54a318062e89a1 Author: Keith Packard Date: Tue Jan 3 22:27:59 2012 -0800 altos: Set correct registers for serial0 baud oops. not going to work very well setting serial 1. Signed-off-by: Keith Packard commit c6821ae734a7efaf2e069f6c5edf9605a9dbe125 Author: Keith Packard Date: Tue Jan 3 20:46:25 2012 -0800 altos: flush stdout when fifo from arduino serial port is empty This avoids leaving bytes pending inside altos Signed-off-by: Keith Packard commit 65b9b5d0d91fef2c7452dc77017f31f176672304 Author: Keith Packard Date: Tue Jan 3 20:42:41 2012 -0800 Build teleshield by default commit 7a42f2e0f145d2d520aed8e241fa39f7cb62b19f Author: Keith Packard Date: Tue Jan 3 20:41:15 2012 -0800 altos: Add support for UART0 in async mode And copy bytes from it to stdout. Signed-off-by: Keith Packard commit 085625ff3992454b59583d95a3c415597c51f754 Author: Keith Packard Date: Fri Dec 30 15:42:28 2011 -0800 altos: More _asm -> __asm changes Missed a few last time Signed-off-by: Keith Packard commit 614ab6a991258a5caad0ca12ae35d0288a5b7503 Author: Keith Packard Date: Fri Dec 30 15:38:32 2011 -0800 altos: Clean up for SDCC 3.1 - more keywords _asm -> __asm sbit -> __sbit remove variables named 'data' Signed-off-by: Keith Packard commit bbb94a6a25a106316414a9a281e924f6c56e9f38 Author: Keith Packard Date: Fri Dec 30 12:27:35 2011 -0800 altos: SDCC 3.1 wants __at instead of at Older SDCC would accept __at, so just replace all occurances unconditionally. Signed-off-by: Keith Packard commit 4783ac9653fd4f816f839452795e0d2e52129d5b Author: Keith Packard Date: Tue Dec 27 15:47:54 2011 -0800 altos: Switch teleshield to use radio slave mode And bring it up at startup time by default Signed-off-by: Keith Packard commit 791c137728dd3398bd7275be13cc9e6be96d7af4 Author: Keith Packard Date: Tue Dec 27 15:37:28 2011 -0800 altos: Add teleshield directory and bring-up code This is cobbled together from various existing bits, but should at least provide some ability to test a teleshield board. Signed-off-by: Keith Packard commit eff8611e3eb19853b06acfcd7e978c9046cd5f78 Author: Keith Packard Date: Sat Dec 17 17:05:06 2011 -0800 altos: Create TeleMetrum v1.2 directory The hardware is software-compatible with v1.1, but it's nice to have the right version number in all of the files. Signed-off-by: Keith Packard commit 6baf6f41040f7b074d8cc84ef75e254c5d2b466b Author: Keith Packard Date: Sat Dec 17 16:58:04 2011 -0800 altosui: googleearth doesn't accept spaces between coordinates anymore it got pickier for some reason; let's not put spaces in now. Signed-off-by: Keith Packard commit dbf7c0c59854e040b65f068069d80716f02fc1bc Author: Keith Packard Date: Sun Nov 13 23:03:22 2011 -0800 altos: Fix pad orientation for pre-1.1 boards They use a different code path for accel as they don't have the VCC compensation code in place. Signed-off-by: Keith Packard commit c1e293ff4953b51c19af8b52f2999419ea84e7e5 Author: Keith Packard Date: Sat Nov 12 19:19:40 2011 -0800 altos: Add startup and config (view only) pages to TT The config page needs a pile of work before it's useful. Signed-off-by: Keith Packard commit 02b4e52a5349217df43105eaa1fff6bfc7dac4cc Author: Keith Packard Date: Sat Nov 12 19:18:53 2011 -0800 altos: Enable packet master and debug in TT The code was already getting linked in, so we might as well use it. Signed-off-by: Keith Packard commit e7044fd95472449e2fb860cef902fa458b91ccac Author: Keith Packard Date: Sat Nov 12 19:18:23 2011 -0800 altos: Fix sdcdb settings for telemetrum v1.0 Signed-off-by: Keith Packard commit 7f9e76e0d3492dcc8bf4b5b1f07c3c727cfdc0ef Author: Keith Packard Date: Sat Nov 12 18:54:14 2011 -0800 altos: Trim skytraq NMEA messages. Shrink NMEA header matching code Tell the skytraq to not bother sending a bunch of the NMEA messages that we don't parse. Explicitly look for 'G' follows by 'P' instead of having some general header matching code. Signed-off-by: Keith Packard commit d3dcb9451f40506abced72783966104645a73bc7 Author: Keith Packard Date: Sat Nov 12 18:52:02 2011 -0800 altos: Allow TT/TBT reports to escape landed state The TM altitude reporting code kept beeping out state and altitude forever, which isn't very useful on TBT or TT. Signed-off-by: Keith Packard commit 0f7d7a4fbede63b51208bf051e08aa73dfbf35a0 Author: Keith Packard Date: Sat Nov 12 18:51:31 2011 -0800 altos: Remove LCD debugging code This isn't needed anymore. Signed-off-by: Keith Packard commit 430b439b9a5cc98b32273a233505de2c2f975c59 Author: Keith Packard Date: Sat Nov 12 18:51:03 2011 -0800 altosui: Add ao_lcd_cursor_on/off This shows or hides a blinking cursor on the LCD. Signed-off-by: Keith Packard commit 75a8490a7bee2a2c7afd559b13f1d9c40c2aa08f Author: Keith Packard Date: Sat Nov 12 18:49:17 2011 -0800 altos: Add configurable set of channels for TT This adds the channel list for TT, which will be configured by AltosUI. Signed-off-by: Keith Packard commit 2ba946fea29ff134ffaeaea9d7932f4bd4e953aa Author: Keith Packard Date: Sat Nov 12 18:48:07 2011 -0800 altos: Export 'ao_cmd_is_white' for use by other code This function tests the current input character. Signed-off-by: Keith Packard commit 20282ef00afe70e3f3193f6f0200254cb2c33e93 Author: Keith Packard Date: Sat Nov 12 18:47:08 2011 -0800 altos: Set default flight log max to 127k on TM v0.1 The flash part on v0.1 boards is only 128kB. Signed-off-by: Keith Packard commit 5972c642f0de0789e90268bfa19ef8b51c06eebc Author: Keith Packard Date: Sat Nov 12 18:44:36 2011 -0800 altos: Handle internal and external telem monitoring requests Record separate internal vs external monitoring state, allowing both to happen at the same time, and when either is turned off, the other keeps working. This also adds disable/enable so that other radio users can temporarily take over the radio; monitoring will resume when the other radio user is finished. Signed-off-by: Keith Packard commit ef7f86453d686a49882e8c1b88a59228c4c631a9 Author: Keith Packard Date: Sat Nov 12 18:37:53 2011 -0800 altos: Check pdata+xdata memory usage during build The sdcc linker doesn't check the sum of pdata+xdata memory usage, it only ensures that xdata itself is small enough. This doesn't keep xdata below the end of usable ram on the cc1111 though (0xfe000). Fix up the check-stack program to also make sure all of xdata fits in available memory. Signed-off-by: Keith Packard commit 2bce71eba9f44b6fcf64e307c8174824c3a0fb57 Author: Keith Packard Date: Sat Nov 12 18:32:49 2011 -0800 altos: Set SPI fill value each time it is used. This ensures that the final MOSI pin value will be high after a receive is finished. Signed-off-by: Keith Packard commit 0a705b62829d492e3a48c81077907cee61afb860 Author: Keith Packard Date: Sat Nov 12 18:31:46 2011 -0800 altos: Initialize DMA config address at boot time Instead of resetting these each time a transfer is started, just set them once at boot time. Signed-off-by: Keith Packard commit 4de8bf6da4d725bb0514d032b0708c5cf420e8fa Author: Keith Packard Date: Sat Nov 12 18:30:56 2011 -0800 altos: debounce buttons Provide API to clear out any button events that happen during startup, and then discard button events 'too close' together. Signed-off-by: Keith Packard commit ad41b5820c2e252627959e4627473f07784be23e Author: Keith Packard Date: Sat Nov 12 18:29:38 2011 -0800 altos: Build TeleTerra v0.2 by default Signed-off-by: Keith Packard commit f6db11c3c87725c809c518f5f19b07325faf9c84 Author: Keith Packard Date: Sat Nov 12 18:10:18 2011 -0800 altosui: Deal with serial port exceptions a bit better This catches a few exceptions and tries to make sure the serial port is closed afterwards. Signed-off-by: Keith Packard commit b132eefc5f63412bb4a98a4bb72b9055e40d5d42 Author: Keith Packard Date: Fri Nov 11 22:30:17 2011 -0800 altos: Make ao_xmem funcs require __xdata void * instead of casting Having an explicit cast in the ao_xmem wrapper macros caused the compiler to generate garbage values for pdata addresses, making the upper byte 0x00 instead of the required 0xf0. Removing the casts from the ao_xmem macros exposed this problem, so a new PDATA_TO_XDATA macros was added, along with a CODE_TO_XDATA macro which serve to cast pointers, with suitable address modifications, so that things work again. Signed-off-by: Keith Packard commit 7ecde50fbebe68a2e2200a2f8d081fd37074f840 Author: Keith Packard Date: Fri Nov 11 22:24:22 2011 -0800 altosui: Make UI Look&Feel configurable Saves the preferred style and uses that for all current and new windows. Signed-off-by: Keith Packard commit 713bd503902526c17a7657c18be947ef8fa6a47a Author: Keith Packard Date: Fri Nov 11 17:18:08 2011 -0800 altos: Shrink Skytraq NMEA parsing - common nmea_finish code This shares the checksum testing across all three lines, saving another 103 bytes. Signed-off-by: Keith Packard commit d3e8275572550b700563b3bde73cd7a43b608f17 Author: Keith Packard Date: Fri Nov 11 17:11:39 2011 -0800 altos: shrink Skytraq NMEA parsing more This cuts another 78 bytes Signed-off-by: Keith Packard commit 8266d8d39c0103e68ef3e476b9639574d9a48771 Author: Keith Packard Date: Fri Nov 11 16:54:18 2011 -0800 altos: Shrink code size of Skytraq NMEA parser Just mess around with the code to make it smaller. These patches save 173 bytes. Signed-off-by: Keith Packard commit df08b2f6de464f4546c1809b931eb4910d88b558 Author: Keith Packard Date: Thu Oct 27 01:01:11 2011 -0700 altos: A bunch of missing .gitignore files (mostly) Signed-off-by: Keith Packard commit a7b285ec0945830b8b31877115157ddd12d6a9fb Author: Keith Packard Date: Thu Oct 27 00:57:45 2011 -0700 altos: Add i2c driver for avr chip Signed-off-by: Keith Packard commit 0669f0d74fc24c4f1925a45a9975b7a49a65b692 Author: Keith Packard Date: Thu Oct 27 00:49:23 2011 -0700 altosui: Only update GPS data when new GPS information arrives Track which telemetry packets are actually producing new GPS information and only update the GPS average position and count of stable GPS reports with new GPS info, instead of on every telemetry packet. Signed-off-by: Keith Packard commit c7e14a2750d437e8b77d68a944a0711e7a0c882b Author: Keith Packard Date: Thu Oct 27 00:35:35 2011 -0700 altos: Fix distance/bearing computations. Deal with large values Lots of little math errors dealing with large distances; easily tested as the GPS currently reports lat 24 lon 121, which is a long ways from Portland. Now reports distances in km when large, otherwise in m. Signed-off-by: Keith Packard commit da330c5975b9f565d059ef8084dfdacc20f34246 Author: Keith Packard Date: Wed Oct 26 22:49:11 2011 -0700 altos: Bring up basic TeleTerra v0.2 UI Lots of fun stuff here -- multiple panes of information. Signed-off-by: Keith Packard commit 8e4cceedb5b758faae684978299e667c4bb06f4d Author: Keith Packard Date: Sun Oct 23 15:24:02 2011 -0700 altos: Flip button IRQ initialization around This matches what the docs suggest Signed-off-by: Keith Packard commit 90e738a3379d258a48a7c92f6708040fc39c373a Author: Keith Packard Date: Sun Oct 23 15:20:50 2011 -0700 altos: Fix battery voltage computation. Full scale is 4.95V, not 3.333V. Signed-off-by: Keith Packard commit f70553106707e3496d07eecb83f0c0a1acad7f77 Author: Keith Packard Date: Sun Oct 23 14:51:32 2011 -0700 altos: Add battery voltage sampling driver For devices without a full ADC compliment, this just samples the battery pin and converts to mV. Signed-off-by: Keith Packard commit 7e7a10c06a0486e9f869e361e46f2c98db9897b0 Author: Keith Packard Date: Sun Oct 23 14:08:59 2011 -0700 altos: Add button driver and sample user Hook up the teleterra buttons and have them beep Signed-off-by: Keith Packard commit 8e2736226fcd7c1ab1ba93a5ebac9b285ebf4733 Author: Keith Packard Date: Sun Oct 23 12:55:35 2011 -0700 src/teleterra-v0.2: Initialize more hardware Initialize the flash storage and flight state reporting beeper. Signed-off-by: Keith Packard commit 07d4477b2e8477e96a2f155a25f95e14a9a47efa Author: Keith Packard Date: Sun Oct 23 12:51:05 2011 -0700 altos/teleterra_0_2: Initialize LCD driver Initialize the LCD for testing. Signed-off-by: Keith Packard commit 85b259c5bba7edbd2a79471bb1104bcf3904d536 Author: Keith Packard Date: Fri Oct 21 14:58:26 2011 -0700 src/teleballoon-v1.1: Use Tm style initial state stuff Come up in pad mode unless someone talks to us while in idle mode. Signed-off-by: Keith Packard commit eb61f7aa2c8b692bd892b85e782f249187c80e5c Author: Keith Packard Date: Fri Oct 21 11:30:43 2011 -0700 altos: Add teleballoon-v1.1 directory This is an alternate firmware load for telemetrum v1.1. Signed-off-by: Keith Packard commit a10aa835a06b71e2cefeb6b10daaf8cc394603b6 Author: Keith Packard Date: Sat Oct 15 22:54:40 2011 -0700 altos: Add LEGACY_MONITOR defines to more programs Make all monitoring programs define whether they want all of the old telemetry formats too. Signed-off-by: Keith Packard commit aef732fc9cdf527a18f2959d6fb7903e832209da Author: Keith Packard Date: Sat Oct 15 22:54:02 2011 -0700 ao-bringup: Make it build with source restructuring Source code all moved around, need to find the header files in new directories.x Signed-off-by: Keith Packard commit 0debe7ffc2aab2b4d08f42e488cb783ae91c36ab Author: Keith Packard Date: Tue Oct 11 23:30:53 2011 -0600 altos: Add TeleTerra v0.2 product This includes most of the necessary drivers. Signed-off-by: Keith Packard commit 65873a3ad1d8e8b5ec002be2576c6f496543306a Author: Keith Packard Date: Tue Oct 11 23:29:24 2011 -0600 altos: oops -- forgot to add the cc1111 string code This is required for all cc1111 builds now; it provides xdata string functions. Signed-off-by: Keith Packard commit badda0d910c56135401dce9adc9e6abebdba2ad7 Author: Keith Packard Date: Tue Oct 11 23:28:02 2011 -0600 altos: Split out arch-specific bits of LCD driver The arch-specific section just puts a single nibble to the device. Signed-off-by: Keith Packard commit 47c2c0b79dc516d2566ae149605b7d70ef2dca98 Author: Keith Packard Date: Tue Oct 11 20:58:04 2011 -0600 Bump to 1.0.9.3 TeleScience and TelePyro now work. Signed-off-by: Keith Packard commit 652c024ed37bfed5de17f45c772796d5cbe4599f Author: Keith Packard Date: Tue Oct 11 18:48:55 2011 -0600 altos/telescience: Add more header dependencies Signed-off-by: Keith Packard commit 75960500d1f290fa9f82183431443ac122f12c19 Author: Keith Packard Date: Tue Oct 11 18:48:11 2011 -0600 altos/avr: telescience doesn't have room for the flash write code This is useful for debugging the SPI and flash drivers, but not necessary in production code. Signed-off-by: Keith Packard commit b80f8ffb61566cbd134c399ea6ccf9290075490b Author: Keith Packard Date: Tue Oct 11 18:45:51 2011 -0600 altos/avr: Must leave space for init stack in ram The stack used during system initialization lives at the top of RAM, so leave some space for that. Signed-off-by: Keith Packard commit f1573a752425121d4c6a14285f1eb0fef3a8bea5 Author: Keith Packard Date: Tue Oct 11 18:44:48 2011 -0600 altos/avr: Shrink default stack size to use less ram Not that we have any way of knowing how much stack we're using, but at least this seems to work. Signed-off-by: Keith Packard commit cb837d9bb9e6736fcdfca7692b1f9490ea090838 Author: Keith Packard Date: Tue Oct 11 18:13:00 2011 -0600 altos: Allow ao_science_slave to not log data This is mostly for debugging with flash writes disabled. Signed-off-by: Keith Packard commit ac0bebc44bc657b303db4c41fa0c9624f3df9f4f Author: Keith Packard Date: Tue Oct 11 18:11:56 2011 -0600 altos: Make HAS_STORAGE_DEBUG define consistent This allows products to include the 'w' command for testing flash writing as needed. Signed-off-by: Keith Packard commit 3a28846d3ff8f82b0e97c211b9debf6d67ee5af5 Author: Keith Packard Date: Tue Oct 11 18:10:45 2011 -0600 altos/avr: Clear SPI receive buffer before clocking new data in I don't know why this is necessary, but the receive buffer gets 'extra' data added somehow. Signed-off-by: Keith Packard commit e60c470b426b7be08a33133e7d8c94201d7e96d4 Author: Keith Packard Date: Tue Oct 11 17:44:40 2011 -0600 altos/avr: Pull-up on the SPI slave select pin This makes the board work even when disconnected from TeleMetrum. Signed-off-by: Keith Packard commit af4470f8025116179ef83726a8287e47c465907b Author: Keith Packard Date: Tue Oct 11 17:44:02 2011 -0600 altos/avr: Register stdio handler when using serial for stdin This code was left in a bit of a mess; just clean it up. Signed-off-by: Keith Packard commit 3bda859caf1501f8408703dca81412d70ba00e04 Author: Keith Packard Date: Tue Oct 11 17:42:24 2011 -0600 altos/avr: telescience does not have a serial port The USART is used for SPI to talk to the flash part. Signed-off-by: Keith Packard commit 0a186e92c5773c5d908e9cee889d645a8172dcdc Author: Keith Packard Date: Tue Oct 11 17:39:35 2011 -0600 altos/avr: Make ao_arch_critical argument be a statement Wrap the argument to ao_arch_critical in do { } while (0); to make sure it gets correctly checked as a statement. Signed-off-by: Keith Packard commit f3453068b0feb640b9d11dbeb021c535ce8b4a31 Author: Keith Packard Date: Tue Oct 11 17:39:06 2011 -0600 altos/avr: Print newline after dumping ADC values Cleans up the formating a bit. Signed-off-by: Keith Packard commit 06b044629951b06c7ec9b0105b89f51b2880ebd0 Author: Keith Packard Date: Tue Oct 11 16:03:04 2011 -0600 altos/avr: SPI mutex is now held by the caller, not the SPI driver SPI transactions generally require a read followed by a write, with the chip select held the whole time. As a result, the SPI bus must be held across multiple transactions. To make this reliable, the caller must hold the SPI mutex, instead of the underlying SPI driver. Signed-off-by: Keith Packard commit 5d1361c95f94125cda244b4cc5e55c2fb77b680b Author: Keith Packard Date: Sun Oct 9 11:09:25 2011 -0600 altosui: Deal with missing state transitions in FlightStats window Any missing start/end times are pinned to the end of the flight. Signed-off-by: Keith Packard commit 5c82b07471f017171c58a6968adf79901f46a987 Author: Keith Packard Date: Sun Oct 9 10:55:04 2011 -0600 altosui: Deal with telem data that goes backwards in time The new telemetry stuff can send packets with older timestamps, so sort telem packets read from disk to create an in-order record of the flight. Signed-off-by: Keith Packard commit 636b7b368e67346b0796cd84fbfd71e10966d61f Author: Keith Packard Date: Sun Oct 9 10:21:56 2011 -0600 altos: Respond to telemetry rate changes immediately Instead of waiting for the previous telemetry interval to expire, immediately switch to the new telemetry rate. This will provide more telemetry data early in the boost. Signed-off-by: Keith Packard commit ca036c5616c3e745c0b878ed90618d4ff710c0e5 Author: Keith Packard Date: Sat Oct 8 22:19:52 2011 -0600 altos: Improve TM v1.0 apogee estimate v1.0 boards have noisy accelerometer data caused by interactions between RF transmission and the accelerometer measurements; this noise generates a negative bias in the accelerometer readings. The net effect is that the estimated speed is lower than the actual speed, causing early an apogee estimate. By increasing the sigma value for accelerometer data, the kalman filter 'trusts' the acceleration data less, putting more weight on the barometer data. This causes the estimated time of apogee to be closer to the correct value. This reduces the response to changes in acceleration. This new value is applied solely to TeleMetrum v1.0 boards. v1.1 boards correct for this error, and hence can use the correct sigma value for the accelerometer. Signed-off-by: Keith Packard commit 26d7eb7149da8c797d7e704d75f73af2d2aa52c2 Author: Keith Packard Date: Sat Oct 8 21:31:34 2011 -0600 Bump to 1.0.9.2 (1.1 RC 2). Flown at Oktoberfest 2011 on 10/09/2011 (we hope) Signed-off-by: Keith Packard commit aad03e3cab4c328e53d3df47b6dac1d3f7a49229 Author: Keith Packard Date: Sat Oct 8 16:07:57 2011 -0600 altosui: Remove igniter voltages from chart. These are just annoying; when we add the ability to turn stuff on/off on the fly, we can add them to the list of available items. Signed-off-by: Keith Packard commit 6a7363b3ba99310bd44c9b66f6f5159e46762be4 Author: Keith Packard Date: Sat Oct 8 11:51:05 2011 -0600 altos: Ignore ejection bumps when doing boost re-detect An ejection charge looks an awful lot like an extra (really small) motor burn. Ignore them by averaging the acceleration during fast/coast using a /64 exponential decay filter. Signed-off-by: Keith Packard commit 82604193ed0c522c1fba0072b504fe88b027f1ee Author: Keith Packard Date: Sat Oct 8 11:50:24 2011 -0600 ao-telem: Add new program to convert telem data to ascii This reads telem files and displays them in ascii form. It's not done, and it's not documented, but it's a start. Signed-off-by: Keith Packard commit cbf5a649c8b7101bef9d57e48e42ac775e758c79 Author: Keith Packard Date: Sat Oct 8 11:46:38 2011 -0600 altosui: Allow for multiple instances of each state in the graph With the new boost re-detect code, we can get multiple instances of boost/fast/coast, so make sure each are displayed in the graph. Signed-off-by: Keith Packard commit f9b0b7423c0640f729d61a91de6ff96ffe4b486e Author: Keith Packard Date: Sat Oct 8 11:43:37 2011 -0600 altosui: Max acceleration across boost instead of all ascent This ignores ejection bumps, making the max acceleration far more useful. Signed-off-by: Keith Packard commit 258b75498916183ed250d3abb3282fe3d843e7a1 Author: Keith Packard Date: Fri Oct 7 09:53:09 2011 -0600 altos: Write xdata versions of memory functions These are significantly smaller than the general pointer versions from libc on the cc1111. Signed-off-by: Keith Packard Conflicts: src/Makefile.proto src/cc1111/ao_adc.c src/cc1111/ao_packet_master.c src/core/ao.h Fix up the new makefiles commit 128bbfa150f88c09f7adde2434b7bf0b5a9ed556 Merge: f6f54d7 246864b Author: Keith Packard Date: Fri Oct 7 08:41:56 2011 -0600 Merge remote-tracking branch 'origin/simple-quiet' into multiarch Conflicts: configure.ac fix version number commit f6f54d70b768dca1715ddddea64a4df00d82b09e Merge: 1c344b7 0d10e25 Author: Keith Packard Date: Fri Oct 7 08:40:14 2011 -0600 Merge remote-tracking branch 'uniarch/master' into multiarch Conflicts: src/core/ao_cmd.c Use ao_arch_reboot after waiting for a second commit 0d10e25766b96f5660e213115cf27b71ff164405 Author: Keith Packard Date: Tue Sep 27 21:06:54 2011 -0700 altos: TM: Don't turn on packet slave mode until idle/invalid state Leave the packet link disabled until we've checked the accelerometer. That way, we cannot accidentally get to idle mode when the rocket is on the rail. Signed-off-by: Keith Packard commit fba1d605a627d03f9587ec060c45fb5d3e96aaeb Author: Keith Packard Date: Mon Sep 26 11:50:28 2011 -0700 altos: Delay reboot by a second to avoid re-entering idle mode TM and Tm go into idle mode if they receive a packet after boot time. When tebooting the device over the packet link, the packet master would be (rapidly) polling the device for additional data and so the device would invariably receive a packet during bootup and go into idle mode again. Delay the reboot by a second to give the controller time to disable the master end of the packet link. Signed-off-by: Keith Packard commit 1c344b760776cd5d8c0297d8db9bf02687381b4e Merge: 4ed53ef fc4173f Author: Keith Packard Date: Fri Oct 7 08:34:59 2011 -0600 Merge remote-tracking branch 'origin/master' into multiarch Conflicts: configure.ac Fix version number and location of ao.h header commit fc4173ff882dd9718f34ed043276ef612783dfe0 Author: Bdale Garbee Date: Tue Sep 27 00:59:08 2011 -0600 add run-time dependency on libjfreechart-java commit 989aae5b18856e3420ea5b7a26ddd8dccae9d6d3 Merge: 0552fbe e44f1ff Author: Bdale Garbee Date: Sat Sep 24 15:34:59 2011 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 0552fbed34c9698dac30c239df2a823a8502b3f3 Author: Bdale Garbee Date: Tue Aug 30 16:59:53 2011 -0600 include 1.0.1 release notes in docs, closes: #642705 commit 4ed53ef838afd4e922deb1c721a311974527525a Author: Keith Packard Date: Fri Sep 23 10:24:33 2011 -0700 altos: Debug code for telepyro doesn't fit in telescience Just too many strings. Signed-off-by: Keith Packard commit f1328d22aab4378c4fb6f0c24dbee95948ca836c Author: Keith Packard Date: Wed Sep 21 23:21:04 2011 -0700 Dump test conversion of ADC0 commit 9b498a6b1327f543c73145e02ff16e76d09f2fe4 Author: Keith Packard Date: Wed Sep 21 22:54:56 2011 -0700 Dump ADC registers commit 7bc007ed45af8fe9ef5daeb7844f183cd9a49035 Author: Keith Packard Date: Wed Sep 21 18:13:55 2011 -0700 altos: Fix make-kalman to run under dash Dash can't deal with >&, so use the old-school > file 2>&1 Signed-off-by: Keith Packard commit 74d5dea5d5ef91db823018b631613d15c6da085d Author: Bdale Garbee Date: Wed Sep 21 16:42:52 2011 -0600 fix bashism that prevents building with /bin/sh->/bin/dash commit f68f22f527104cdffa1f5e398a51a466a13ff1fb Author: Bdale Garbee Date: Wed Sep 21 16:42:22 2011 -0600 add missing sense_h entry in TelePyro table commit 16aa67fc77b82a9d051f205037b27a5384e3e3b7 Author: Keith Packard Date: Wed Sep 21 14:24:30 2011 -0700 altos: missing ao_log_single.c Neglected to add this file. Signed-off-by: Keith Packard commit 7a02d4bace05cc829522933b9df6b82a9e17336f Author: Keith Packard Date: Wed Sep 21 11:30:43 2011 -0700 altos: Add TelePyro v0.1 support Signed-off-by: Keith Packard commit 0820f5c6dfe067590f36e8201a4049719dcf3d7c Author: Keith Packard Date: Wed Sep 21 11:40:56 2011 -0700 altos: Support staging by going back to boost as needed Detect additional motor burns by looking for high positive acceleration in coast or fast modes. Signed-off-by: Keith Packard commit c8a00bb9ccdf0d4257f037c2bf996ce5e6b0b0c0 Author: Keith Packard Date: Wed Sep 21 11:39:24 2011 -0700 altos: Pre-compute RDF packet len at compile time Instead of computing the RDF packet len at run time, which takes a pile of code space. Signed-off-by: Keith Packard commit abf17522c206b465375b73a004a6d67bfa714ba3 Author: Keith Packard Date: Wed Sep 21 11:36:11 2011 -0700 altos: SPI slave code is now per-product We can't write general purpose SPI slave code as we must eliminate any latency because the SPI ports have no buffering. Signed-off-by: Keith Packard commit 246864b0597ddd397aba39be1fe39df0df189433 Author: Keith Packard Date: Fri Sep 16 18:27:56 2011 -0700 Update to version 1.0.2 Bdale is planning to fly this version on 9/17. Signed-off-by: Keith Packard commit eaa7d7c7dd445ade7d8e3228306785f9a545b89a Author: Keith Packard Date: Sun Sep 4 08:49:16 2011 -0700 altos: Silence radio while firing igniters Hold the radio mutex while firing igniters to reduce potential interactions between the two. Signed-off-by: Keith Packard commit d1e81db87ce0f89fd0b7651ca00979498cd00b78 Author: Keith Packard Date: Sun Sep 4 08:48:05 2011 -0700 altos: Delay restart of RDF at apogee Instead of immediately trying to send RDF at apogee, start it after the usual RDF interval to avoid doing RDF while firing the apogee igniter. Signed-off-by: Keith Packard commit e44f1ffb7104d70f5c9b9a90529ddbe1b75da074 Author: Bdale Garbee Date: Tue Aug 30 16:59:53 2011 -0600 include 1.0.1 release notes in docs commit b2d4e49bfe88aa61ca36fb1af8f3088c5754304c Author: Keith Packard Date: Mon Aug 29 14:22:19 2011 -0700 altos: Split avr clock initialization to ao_clock.c This will be shared with the attiny code for TeleTerra v0.1 Signed-off-by: Keith Packard commit e66fd72664aae7c000dce9c528803e28e7918fdf Author: Keith Packard Date: Sun Aug 28 17:03:26 2011 -0700 altos: don't beep igniter continuity for telenano Without any igniters, it's not nice to annoy people. Signed-off-by: Keith Packard commit 122c4101164d598e655fa9ad8473053d30ff4212 Author: Keith Packard Date: Sun Aug 28 16:55:55 2011 -0700 altos: Report continuity in telebt Report continuity values from remote altimeter Signed-off-by: Keith Packard commit 9b9568a637ffdbc67225271005f2b996ee08a0df Author: Keith Packard Date: Sun Aug 28 16:39:41 2011 -0700 altos: add 'report' to telebt This beeps out flight state changes and max altitude at landing, just like the altimeter. Signed-off-by: Keith Packard commit 31e3255b6cbfaf95c0e97e2d1ec8de72f845994c Author: Keith Packard Date: Sun Aug 28 15:50:30 2011 -0700 altosui: Report error message back from libaltos This includes changing all of the error dialogs to show the error message rather than just the file name. Signed-off-by: Keith Packard commit cf72c2f5a69a736c28a9b63e124d510ef41a9f5d Author: Keith Packard Date: Sun Aug 28 15:50:01 2011 -0700 altosui: Add bluetooth bits back in Stub out functions on mac/windows for now. Signed-off-by: Keith Packard commit 3d478a39f2ede7b805bbe568cc1c8ecc176d7a04 Author: Keith Packard Date: Sun Aug 28 15:45:05 2011 -0700 altos: Add the BT serial debug code back in, disabled This code is useful whenever the BT stuff is acting up, so just leave the source in place, turned off by default. Signed-off-by: Keith Packard commit 8eaa1c4697a3cfc2406e1adadc3094f7f712341a Author: Keith Packard Date: Sun Aug 28 15:43:32 2011 -0700 altos: Add pragma to eliminate unreachable code warning on SDCC This pragma was removed as GCC doesn't support it; make it conditional on SDCC so that we eliminate a warning message. Signed-off-by: Keith Packard commit 7c6a3195dec6ac68f5d7b3f883ccc2c316384e76 Author: Keith Packard Date: Sun Aug 28 15:42:25 2011 -0700 altos: Blink on telem packet receive instead of toggle Toggling the LED was too confusing; just blink for 100ms each time a packet comes in. Signed-off-by: Keith Packard commit cff737c290347b61ba16584880c2f4c436b95042 Author: Keith Packard Date: Sun Aug 28 15:40:40 2011 -0700 altos: Remove RSSI reporting from telebt Telebt uses one LED for bluetooth connection and the other for telem packet reception leaving none for RSSI. Signed-off-by: Keith Packard commit 27835686648e14b030f6f7ec1fc0c0fd1c387ea4 Author: Keith Packard Date: Sun Aug 28 15:38:12 2011 -0700 altos: Add RSSI blinking to new-style telemetry code Pull the RSSI data out locally and set the RSSI led blinking when using the variable-length TELEM output mechanism. Signed-off-by: Keith Packard commit 6f231a3e512ff7fdd87a399a72c7c36f283394f3 Author: Keith Packard Date: Sun Aug 28 15:20:41 2011 -0700 Bump version to 1.0.9.0 Make it distinct from any production version Signed-off-by: Keith Packard commit e53557373e539d591a03d02db146b27d08c7eba3 Author: Keith Packard Date: Sun Aug 28 15:18:29 2011 -0700 altos: Start logging telemetry data right at boot time Anything logging telemetry data should just start logging packets as soon as they boot. Signed-off-by: Keith Packard commit 5c3a0263d292cb0675f608d0ef085d13e51ce6ba Author: Bdale Garbee Date: Sun Aug 28 13:39:37 2011 -0600 update changelogs for Debian build commit b33a92e372327158ab21c1bb2d091c58761efe10 Author: Keith Packard Date: Sat Aug 27 15:19:43 2011 -0700 altos: Share log code between telescience and telebt. Add telebt log Telescience and telebt both log data in 32-byte chunks, so share some code which manages that between the two products. Add simple telemetry logging to telebt. Signed-off-by: Keith Packard commit 7e2b5e2957ddcb808723081ca7e046a28b7e70e5 Author: Keith Packard Date: Sat Aug 27 13:30:34 2011 -0700 altosui: launch controller button needs to move over monitor idle was inserted into position 2,2 Signed-off-by: Keith Packard commit bc827699be4ed9ac60a7e862e6532791968bf685 Author: Keith Packard Date: Sat Aug 27 13:28:01 2011 -0700 altos: Fix up telelaunch Makefile Adding all of the mising sources Signed-off-by: Keith Packard commit 8a1cbef0e316e38c80b71d3bac15641fe56e0a99 Author: Keith Packard Date: Sat Aug 27 13:27:28 2011 -0700 altos: Add HAS_LOG for products that log to eeprom Some products have eeprom for config, but none for logging (like telelaunch) Signed-off-by: Keith Packard commit 6afbc1876cd63f64e8975e300692f95a43866f5f Author: Keith Packard Date: Sat Aug 27 13:27:00 2011 -0700 altos: ao_launch belongs in cc1111 Signed-off-by: Keith Packard commit 9adf2c9c40ea1da2637ed809dc0d004e47844440 Author: Keith Packard Date: Sat Aug 27 13:25:23 2011 -0700 altos: add ao_aes/radio_cmac to tidongle, teledongle and telebt All of these can do the telelco stuff at this point. Signed-off-by: Keith Packard commit b3c95582774355c991d0a9f27d0a86881e643e62 Author: Keith Packard Date: Sat Aug 27 13:24:41 2011 -0700 altos: move igniter defines back to ao_pins.h so that ao_launch gets them too Signed-off-by: Keith Packard commit 6b2db651a1dbc7ea97fce802b5f10b88be1ab42b Author: Keith Packard Date: Sat Aug 27 12:42:10 2011 -0700 altos: Add makefile for telelaunch Signed-off-by: Keith Packard commit 02df2141e5a67afc16acd01a6c60f3cc61052b93 Author: Keith Packard Date: Mon Aug 1 22:45:43 2011 -0700 altosui: Hook up the launch controller UI from the main button box Provide a button to start the launch controller UI. Signed-off-by: Keith Packard commit 4568bc796a6c362ebf7f72ee9a5fa4a9a3c4ba6a Author: Keith Packard Date: Mon Aug 1 17:08:24 2011 -0700 altosui: Add primitive UI for TeleLaunch Display status along with arm and fire buttons. Signed-off-by: Keith Packard commit be117376179126824439d98379079025ca0b245a Author: Keith Packard Date: Mon Aug 1 17:06:49 2011 -0700 altos: Keep relay closed while firing launcher Instead of opening the relay while checking the desired state, keep it closed until the state goes off. Signed-off-by: Keith Packard commit bc1b94df4d6b92e794ec93d9c1682ae5f61efa61 Author: Keith Packard Date: Thu Jul 21 22:25:45 2011 -0700 altos: Finish up primitive telelaunch protocol This adds two commands to teledongle, one to query and one to actually fire the igniter. These will (eventually) want to be replaced with something nicer. Signed-off-by: Keith Packard commit 4299b5a36a2f6f9f7bbbc3a1b935dd2357c1fb0f Author: Keith Packard Date: Thu Jul 21 20:04:05 2011 -0700 altos: Implement remote launch protocol Uses the radio_cmac module to provide secure communication. Keeps igniter closed for 500ms. Provides remote status for arming and ignition. Signed-off-by: Keith Packard commit 776df9ce2e7b4fa5cedda326988e66c614299af4 Author: Keith Packard Date: Wed Jul 20 23:46:04 2011 -0700 altos: Get AES CBC-MAC packet transfers running This just has simple command-line based packet transfers for testing. This also adds special ao_telelaunch bits where the launch control code will live. Signed-off-by: Keith Packard commit bd0bf00081bb24af5cd67a9351b0b0c1a041d0d3 Author: Keith Packard Date: Sat Jul 16 14:25:01 2011 -0700 altos: More work on AES bits Signed-off-by: Keith Packard commit a731d240f802d37524ce84c3c6acf22bcda4d522 Author: Keith Packard Date: Fri Jul 15 18:51:33 2011 -0700 altos: Start work on AES and raw radio interfaces. We probably don't want this raw radio interface, but it's a start. Signed-off-by: Keith Packard commit f145be3fc4ee94fdb5c1e2406b6c11d38bdbbd9b Author: Keith Packard Date: Wed Jul 13 20:01:47 2011 -0700 altos: Start telelaunch product Looks a lot like TM, but without the flight code. Signed-off-by: Keith Packard commit 859ee0268b9f2e1f5933019f1231d857a1cac4da Author: Keith Packard Date: Wed Jul 13 19:59:58 2011 -0700 altosui: Add USB IDs for telelaunch and telelco to java bits telelaunch is 0x000f telelco is 0x0010 Signed-off-by: Keith Packard commit b10fbbf0830053a39e4640a53598b1c027615c63 Author: Keith Packard Date: Mon Aug 1 22:44:13 2011 -0700 altos: Add 'send all baro' compile-time option This option creates a new packet type that delivers full sensor-rate barometer telemetry data to allow for off-line analysis of flight algorithms using all of the data, rather than the slower rate provided either over telemetry or stored in the eeprom file. Define AO_SEND_ALL_BARO and this will get built in. Perhaps this could be a run-time option... Signed-off-by: Keith Packard commit 1c46c419704f661064d200432eb7efeeb11b3859 Author: Keith Packard Date: Fri Aug 26 20:46:47 2011 -0700 altos: re-order ao_task to match single-arch code This is just for testing to make the new build match the old build exactly. Signed-off-by: Keith Packard commit c32893ce79835a8f861d6ef414644c2ff9769ff6 Author: Keith Packard Date: Fri Aug 26 15:02:43 2011 -0700 altos: Integrate telescience support Adds a few drivers including an LCD driver Signed-off-by: Keith Packard commit 93b8f40bb451c9ec152490d1f431ab18f8ecb7d1 Author: Bdale Garbee Date: Fri Aug 26 10:52:55 2011 -0600 more release process doc updates commit 9451ae5e4ea6ecfa512ba93197351682d4d043dc Author: Bdale Garbee Date: Fri Aug 26 10:51:18 2011 -0600 update release process docs commit 01aee9ebe517ed657692e0a39a31ae0ddfb5b8b0 Author: Bdale Garbee Date: Fri Aug 26 10:39:45 2011 -0600 update changelogs for Debian build commit bc399d97a8424a5262f66a03e3bc403f793bb337 Author: Bdale Garbee Date: Fri Aug 26 10:38:44 2011 -0600 roll back packaging changelog for rebuild commit 13e6e799070a1469cbc2ff990379ee520b8f0e6a Author: Bdale Garbee Date: Fri Aug 26 10:29:58 2011 -0600 roll release notes version from 1.0 to 1.0.1 commit 1d15c841ad276127edae0345bd316c30731fffbf Author: Bdale Garbee Date: Fri Aug 26 10:24:35 2011 -0600 ignore generated log file commit 58a74c3c3dcd01509224326cffeb67a3e809e4e6 Author: Bdale Garbee Date: Fri Aug 26 10:07:15 2011 -0600 fix telemini firmware path name commit 0a92eb2fa6b213533691288d8f99d72b80312983 Author: Bdale Garbee Date: Fri Aug 26 09:43:06 2011 -0600 update changelogs for Debian build commit 3cea033ec928c21b9f7b810898ed3c3cc536d2ce Author: Bdale Garbee Date: Fri Aug 26 09:41:46 2011 -0600 get ready for a 1.0.1 release commit 674231773256bacd7acb4b5718c47412e47b813f Merge: 08e3d54 3bfe8df Author: Bdale Garbee Date: Fri Aug 26 09:37:01 2011 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 08e3d54bacf8b38a7c33e420a0bc19bcc7acedd4 Author: Bdale Garbee Date: Fri Aug 26 09:35:54 2011 -0600 moving git-buildpackage config into .git/ since it is fairly specific to Bdale's build environment, and doesn't need to be in the source package commit 8125acc030574afed6f23aa8aa302d9c768bb04e Author: Keith Packard Date: Thu Aug 25 22:55:33 2011 -0700 altos: get avr-demo to build. Pull in AVR drivers and LCD driver This completes the basic task of making an AVR version of altos by getting the Teensy 'avr-demo' program to build. Signed-off-by: Keith Packard commit e9fab7dc99a0e7c22b511c5919adf7df85213252 Author: Keith Packard Date: Thu Aug 25 22:04:36 2011 -0700 altos: add GCC/SDCC compat macros, init_stack, save_context and GCC stdio hooks More arch-indepdency bits. GCC stdio is different from SDCC, so create suitable code in avr/ao_avr_stdio.c Create macros to initialize the task stack frame and save the task context. Add GCC/SDCC type definition compatibility macros Signed-off-by: Keith Packard commit a588092a7d76dab92e4ab11e0fdb457d2ddc9025 Author: Keith Packard Date: Thu Aug 25 21:10:56 2011 -0700 altos: AVR changes - create ao_arch.h files, define ao_arch_reboot Start pulling changes needed for avr port; architecture-specific code will live in /ao_arch.h. This first change defines the ao_arch_reboot macro to reboot the microcontroller. Signed-off-by: Keith Packard commit 9513be7f9d3d0b0ec29f6487fa9dc8f1ac24d0de Author: Keith Packard Date: Thu Aug 25 20:43:44 2011 -0700 altos: Restructure altos build to prepare for multi-arch support Split out sources into separate directories: core: architecture and product independent bits cc1111: cc1111-specific code drivers: architecture independent drivers product: product-specific sources and Makefile fragments util: scripts for building stuff This should have no effect on the built products, but testing is encouraged Signed-off-by: Keith Packard commit 3bfe8df44b575ca430ffaa051e20faa955a06c03 Author: Keith Packard Date: Thu Aug 25 18:02:45 2011 -0700 altos: Clear callsign on initial config load Before being written the first time, ao_config will get set to 0xff when the config storage is read. This leaves the tail of the callsign filled with invalid bytes. Zero the whole thing before loading the default callsign to make sure any extra bytes are set correctly. Signed-off-by: Keith Packard commit 93ecaf7f18f8f4c15953c2e80dc9e1b20d04fdfa Author: Bdale Garbee Date: Thu Aug 25 15:46:30 2011 -0600 update TeleMini turnon script now that we've made a stable firmware release commit c3314dae2d3df82e188daf6ba8520cce833592c6 Author: Bdale Garbee Date: Thu Aug 25 03:36:25 2011 -0600 use multimaint-merge to make Debian changelogs less ugly commit f9d87de0e2681c2ec5753f4fffef0e61a3a9e144 Author: Bdale Garbee Date: Thu Aug 25 02:22:53 2011 -0600 update changelogs for Debian build commit 41998645c04a2ee856dec272b40c2dc5913291d3 Author: Bdale Garbee Date: Thu Aug 25 02:16:17 2011 -0600 add a postinst to remove sources.list.d fragment delivered by old private versions of this package, no longer needed once we have official packages commit d65e4f6b0a8ba8f67c8a916f2e8be0ec5c75f47d Author: Bdale Garbee Date: Thu Aug 25 02:05:49 2011 -0600 really, I mean it, no longer deliver the sources.list fragment commit 0579bd5de9e7686d227a16951dd520439ca5472b Author: Bdale Garbee Date: Thu Aug 25 01:55:32 2011 -0600 we need a main category in the desktop file commit 3ec03792adebbeadc9c0d4985c6f51877e8ab969 Author: Bdale Garbee Date: Thu Aug 25 01:48:11 2011 -0600 update desktop file for consistency with package section commit 0b1d5b678f0e36fbe09d4d3babffb77f857f098d Author: Bdale Garbee Date: Thu Aug 25 01:37:31 2011 -0600 rewind packaging changelog to last tagged version commit f0891fc2e4fa4fd6dd5c2bfc74e4514de986a295 Author: Bdale Garbee Date: Thu Aug 25 01:35:18 2011 -0600 ao-view is no longer included in the altos package, so have the old-style Debian menu entry point to altosui instead commit a7ee1049519bf46b3864666999249876009fc3bf Author: Bdale Garbee Date: Thu Aug 25 01:35:06 2011 -0600 changes in preparation for upload to Debian commit 2992184f7a032c95e22023080fbc26443ed786f5 Author: Bdale Garbee Date: Thu Aug 25 01:30:36 2011 -0600 don't deliver sources.list fragment in official Debian packages commit 3fc92a529dae410a41038cce38c6a44f5e58bd1f Author: Bdale Garbee Date: Thu Aug 25 01:11:47 2011 -0600 prepare to release commit 73abe19acf709c00f5352ec12e8cd6edae1d1963 Merge: 1bd781d 5158493 Author: Bdale Garbee Date: Thu Aug 25 00:34:49 2011 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos Conflicts: doc/altusmetrum.xsl commit 1bd781da934c738e0c9294197c7eb622b0710a9a Author: Bdale Garbee Date: Thu Aug 25 00:32:47 2011 -0600 more tweaks commit 5158493c8df527e7527057c719c75248609eb3dc Author: Keith Packard Date: Wed Aug 24 23:21:02 2011 -0700 doc: Remove duplicate documentation about max flight log This was described in detail in both the System Operation and AltosUI chapters. Remove the duplicate from the AltosUI chapter. Signed-off-by: Keith Packard commit e268798dc260311f5f0167909481b41c9d27fc1c Merge: 458f816 242344d Author: Keith Packard Date: Wed Aug 24 23:06:44 2011 -0700 Merge remote-tracking branch 'origin/master' commit 458f816ad23fd6784757b13b244057d4be64260e Author: Keith Packard Date: Wed Aug 24 23:06:01 2011 -0700 doc: Describe max flight log, ignite mode and pad orientation These describe what these configuration parmaeters do, not how to set them. Signed-off-by: Keith Packard commit 242344d3e32e7c7cd9270d708555923fa888e4d8 Merge: 5c1cf74 94a1b22 Author: Bdale Garbee Date: Wed Aug 24 23:51:38 2011 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos Conflicts: doc/altusmetrum.xsl commit 5c1cf7492b82e63a9db9d0238ecbcd2b59486893 Author: Bdale Garbee Date: Wed Aug 24 23:50:31 2011 -0600 tweak tweak tweak commit 94a1b220bbfbb64b9772f3ee64a8e9d353d65e94 Author: Keith Packard Date: Wed Aug 24 22:29:56 2011 -0700 doc: Move the remaining command-mode descriptions to the appendix Signed-off-by: Keith Packard commit edfb553bb4fa5b0c7c6c658505b2a99d05fb13bf Merge: c74ab82 ec96f11 Author: Bdale Garbee Date: Wed Aug 24 23:23:56 2011 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit c74ab82a7b7a6ad6f79129a9ef5954270e7e8f11 Author: Bdale Garbee Date: Wed Aug 24 23:23:45 2011 -0600 more changes commit ec96f11666f9cbd98e16caeccd5d399978bde81b Author: Keith Packard Date: Wed Aug 24 22:20:29 2011 -0700 doc: Updating Firmware is now a separate chapter The Flash Image paragraph references it, change the reference wording. Signed-off-by: Keith Packard commit 11099fab63d32f53d0f2e04a7ab04392e39b5963 Author: Keith Packard Date: Wed Aug 24 22:18:29 2011 -0700 doc: Move updating device firmware section to separate chapter This isn't central to operation of the devices, so move it out to a separate chapter Signed-off-by: Keith Packard commit 50769fbbeaaf61111d363411e0ef0b2868681cf4 Merge: 425fa99 d92c173 Author: Bdale Garbee Date: Wed Aug 24 23:15:20 2011 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 425fa995aeaccc1ec9ecf011f185b4406df61541 Author: Bdale Garbee Date: Wed Aug 24 23:15:15 2011 -0600 more tweaking commit d92c173615a5fb0278ff6878595bed3f8d813e03 Author: Keith Packard Date: Wed Aug 24 22:12:39 2011 -0700 doc: use 'radio link' to refer to packet command mode Make sure 'radio link' doesn't refer to telemetry and eliminate use of 'RF link' and other similar but not identical phrases. Signed-off-by: Keith Packard commit 65ca6f0d7c96432413868274b2cfdea4b76683e4 Author: Bdale Garbee Date: Wed Aug 24 23:03:23 2011 -0600 more tweaks commit 09981cd024297fd4ef093c7468de2b9d5f3c2691 Merge: a476e76 03c8b27 Author: Bdale Garbee Date: Wed Aug 24 22:42:39 2011 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit a476e76622b6fa70bf7c8883d2a2a64a382fbd78 Author: Bdale Garbee Date: Wed Aug 24 22:42:33 2011 -0600 more doc tweaks commit 03c8b2702a45a12c4748cd1ec801d720c816d9e9 Author: Keith Packard Date: Wed Aug 24 21:39:48 2011 -0700 doc: Move Packet Command Mode section to System Operations chapter It makes far more sense here. Signed-off-by: Keith Packard commit 221157af586c6fd7368ee858a390f38bc5ed50f5 Author: Keith Packard Date: Wed Aug 24 21:31:05 2011 -0700 doc: Describe packet command mode a bit better. Include comments about TeleMini in the introduction, and then explain a bit better what the best method of reliably initiating packet command mode are (start operation, then boot telemini). Signed-off-by: Keith Packard commit d4e1aa92b6ce2f3e4c51029595d1d44a7f2f14a0 Author: Bdale Garbee Date: Wed Aug 24 22:27:35 2011 -0600 more doc tweaking commit 6eff8d5831dde8e690586cd2a97ddf1595cd2674 Author: Keith Packard Date: Wed Aug 24 20:59:28 2011 -0700 doc: Document pad-mode 'on-board data logging' indicator There wasn't any documentation for this field in the 'Launch Pad' tab. Signed-off-by: Keith Packard commit ca0879ba6e5295b4fa790705f742eb647a462ea0 Author: Keith Packard Date: Wed Aug 24 20:42:09 2011 -0700 doc: Spelling corrections in altusmetrum.xsl Lots of minor spelling errors. Signed-off-by: Keith Packard commit 963649aa064acfe75d2ff4babd9a0d35dc254e86 Author: Bdale Garbee Date: Wed Aug 24 21:39:21 2011 -0600 doc tweaks through chap 3 commit 3d88e0493ab446d7c7011786390d30618a72d045 Merge: 02d6545 5a9972d Author: Bdale Garbee Date: Wed Aug 24 21:26:26 2011 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 5a9972d41a87d4204c6c93cacf14e2962cc1c59c Author: Keith Packard Date: Wed Aug 24 20:22:29 2011 -0700 altos/windows: Get latest JRE 1.6 version (Version 6 update 27) No reason to download stale java bits. Signed-off-by: Keith Packard commit cbfbaabb39f9f7709d00cf3dc63cc1bc7563062e Author: Keith Packard Date: Wed Aug 24 19:13:03 2011 -0700 altosui: Make flight monitor font size configurable Tiny netbooks aren't tall enough for the 'usual' font size, so provide a smaller option. Then provide a bigger option, just because. Signed-off-by: Keith Packard commit 9849883a754a73b861dd7be530753ff5c2abb499 Author: Keith Packard Date: Wed Aug 24 01:48:28 2011 -0700 altosui: Don't trust companion telemetry record 'channels' count It can be bogus, allowing the code to walk off the end of the allocated data array. Signed-off-by: Keith Packard commit 02d65453225a3807e61b2ac6e2a26da31a05bd45 Author: Bdale Garbee Date: Wed Aug 24 01:53:02 2011 -0600 update changelogs for Debian build commit 1d286dab223e6c44a25180f944ccb5ba8ed9d5f5 Author: Bdale Garbee Date: Wed Aug 24 01:51:54 2011 -0600 prepare for another rebuild commit 82634eae16f9691a6c70a48d0858a399814631f2 Author: Bdale Garbee Date: Wed Aug 24 01:50:56 2011 -0600 add pkg-config to the build deps commit cf2823cab40aa450375c108bae8ed6b051fbefe5 Author: Bdale Garbee Date: Wed Aug 24 01:45:28 2011 -0600 update changelogs for Debian build commit bf6f00693c394f885d3378415dc7c8a1815a31ed Author: Bdale Garbee Date: Wed Aug 24 01:43:59 2011 -0600 roll changelog back in prep for another test build commit 06aee245eb74e839e50226fa2ddb967c3977fe7c Author: Bdale Garbee Date: Wed Aug 24 01:41:53 2011 -0600 another test round commit 4d94e8f9f807a0bbeab0cdead011e74eeca1d1b6 Merge: 4b5369d 3b0a9a1 Author: Bdale Garbee Date: Wed Aug 24 01:38:58 2011 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 3b0a9a1c87390747492bfef435ac8e0829ec748f Author: Keith Packard Date: Wed Aug 24 00:29:36 2011 -0700 altosui: Try to get dialogs to look a little better grid bag constraints are not my friend. Signed-off-by: Keith Packard commit 2165e82327faaada23f0503b8e49b80f938b746c Author: Keith Packard Date: Wed Aug 24 00:09:51 2011 -0700 altosui: Add tool-tips to config dialogs Provides more information about the various settings, and, when they're disabled, tells the user why. Signed-off-by: Keith Packard commit 63808e0392f43633f92fee137d968e969dd364c9 Author: Keith Packard Date: Tue Aug 23 23:20:00 2011 -0700 Remove stale tools (ao-dumplog, ao-postflight, ao-view) These tools have all been supplanted by altosui at this point, and keeping them around increases the build dependencies by quite a lot. Signed-off-by: Keith Packard commit 186dfc7c72aa7eba281f29f917088e49e44c2ddc Author: Keith Packard Date: Tue Aug 23 22:51:57 2011 -0700 altosui: Use system look&feel Turn on the 'be less ugly bit' Signed-off-by: Keith Packard commit 4b5369dc3da2fc8441eeacbf094537b0cf52240d Author: Bdale Garbee Date: Tue Aug 23 21:37:17 2011 -0600 update changelogs for Debian build commit 99316a17a9642a207c45610e7cc1c33c2600ece0 Author: Bdale Garbee Date: Tue Aug 23 21:33:53 2011 -0600 rewind changelog to 0.9.6.0 for rebuild commit 192881b7cae49af375cc2b8b7305c937079ee724 Author: Bdale Garbee Date: Tue Aug 23 20:11:01 2011 -0600 update changelogs for Debian build commit fc7e46b1215ea2b4cc138ed77d8eaa122369b15f Author: Bdale Garbee Date: Tue Aug 23 20:10:14 2011 -0600 turn off auto-tagging during Debian build commit 998adccc1c4f8f6c44833bbf4a52d9441748b996 Author: Keith Packard Date: Tue Aug 23 18:56:07 2011 -0700 altosui: add tool-tips to the button box. Signed-off-by: Keith Packard commit 754b9591574c12ddd6e4ab590c6a5f3806b80213 Author: Keith Packard Date: Tue Aug 23 13:29:23 2011 -0700 libaltos: fix Mac OS X function signatures altos_list_start was declared to take a (int time) parameter for some reason. Signed-off-by: Keith Packard commit fa6df3fa21e8f09e70371e6c6cc7827a533b4fe6 Author: Keith Packard Date: Mon Aug 22 23:35:28 2011 -0700 altosui: Update mac os X library This has been tested on 32-bit OS X and it works; dunno about 64-bit. Signed-off-by: Keith Packard commit 955989147f90a4fd22c1375d1b41425dae4e7dd1 Author: Keith Packard Date: Mon Aug 22 23:34:55 2011 -0700 altosui: Reset all config data on 'reset' command This lets you switch altimeters without getting any stale data. Signed-off-by: Keith Packard commit d249da3fb064754753bd20cd2ca1e5ffcce294ca Author: Keith Packard Date: Mon Aug 22 23:33:52 2011 -0700 altosui: Only 'show' config dialog once Otherwise, the dialog jumps back to the initial position each time the data is updated. Signed-off-by: Keith Packard commit e9254c3472e42d93181674b2c3cd80fe6eea696e Author: Keith Packard Date: Mon Aug 22 23:32:36 2011 -0700 altosui: fix 'magic' string to signal end of config data Was using "done", which happens to be displayed by the 'l' command. Switch to 'all finished' which doesn't appear in the config data output. Yes, this method is a kludge. Signed-off-by: Keith Packard commit 4aebe65b089e4b825a5ae238b81e2181bd88175a Author: Keith Packard Date: Mon Aug 22 23:31:54 2011 -0700 altosui: Can't configure flight log max on TeleMini It's only got space for one flight. Signed-off-by: Keith Packard commit 3a84e8e0cc86481c301f4335843a0e1a94bad5c0 Author: Keith Packard Date: Mon Aug 22 23:12:30 2011 -0700 altosui: Make monitor-idle display correct 'On-board data logging' status Count number of stored flights and see if there's space for another one. Signed-off-by: Keith Packard commit afe6aba9cb91e93234ffee2a22eee40f848ddedd Author: Keith Packard Date: Mon Aug 22 18:25:34 2011 -0700 altosui: Add --summary option to dump flight stats to stdout useful for quickly capturing sense of a flight. Signed-off-by: Keith Packard commit 4e2fd7ae76c23aa8da1390ebcbd8f45276cd7a32 Author: Keith Packard Date: Mon Aug 22 18:24:54 2011 -0700 altosui: Show filename in AltosGraph window Makes it easier to tell multiple windows apart Signed-off-by: Keith Packard commit f4ea46dc205454411c224ada7805f813989efd4a Author: Keith Packard Date: Mon Aug 22 18:23:41 2011 -0700 altosui: Add date/time/serial/flight to flight stats tab And switch to using the AltosConvert units conversions functions. Signed-off-by: Keith Packard commit b4c71ba56c471720c72853057d0a527825a78fa0 Author: Keith Packard Date: Mon Aug 22 18:22:21 2011 -0700 altosui: Capture date/time/serial/flight in AltosFlightStats Time is the time when boost was detected. Signed-off-by: Keith Packard commit 5ef731bd87c6d2a71a4edcc69a218eaf1aa7c465 Author: Keith Packard Date: Mon Aug 22 18:21:35 2011 -0700 altosui: Add a few simple unit conversions Signed-off-by: Keith Packard commit b83d8eca433ed5796835f6a09271f50c7f27cc81 Author: Keith Packard Date: Mon Aug 22 17:18:02 2011 -0700 doc: Add Installation Recommendations chapter Document installation suggestions, including mounting, RFI, antenna issues and ground testing. Signed-off-by: Keith Packard commit a0f62b8569c5535a2598cfb6ab52db79f0a52f92 Author: Keith Packard Date: Mon Aug 22 17:17:43 2011 -0700 doc: Add note about telemetry disable mode to 1.0 release notes Signed-off-by: Keith Packard commit 393d231b9689cd1c358600ee76e0e808f89670c8 Author: Keith Packard Date: Sun Aug 21 22:52:45 2011 -0700 altosui: Attempt to make both 32- and 64-bit windows DLLs We'll see if they work... Signed-off-by: Keith Packard commit d5bd40847b17c32405dfba864a2a5a3b19aa7e85 Author: Keith Packard Date: Sun Aug 21 22:12:53 2011 -0700 altosui/windows: Fix a bunch of windows compiler warnings. Some of these may have actually been serious -- a write length was getting stored in a signed char... Signed-off-by: Keith Packard commit 2353d83be15b398754c2564f95374c6ea0f8de92 Author: Keith Packard Date: Sun Aug 21 22:12:04 2011 -0700 altos-fat/windows: Check and install Java 1.6 as needed Signed-off-by: Keith Packard commit a08826292ebd802a1ff2effccac3b96fd061c47d Merge: 3366cfe 55be3db Author: Bdale Garbee Date: Mon Aug 22 16:08:55 2011 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 55be3db2e31fe97e7f351e3c490b8bc4cf7192b2 Author: Keith Packard Date: Sun Aug 21 19:18:54 2011 -0700 altosui: Clean up command line processing. Add --graph Make the command line processing a bit less ad-hoc, track 'mode' of processing and deal with all files on the command line. Signed-off-by: Keith Packard commit 6823ad5e48fc0a19791d96f886b5689f88c4311b Author: Keith Packard Date: Thu Aug 18 18:02:02 2011 -0700 altos/altosui: Add ability to disable telemetry/rdf completely This turns off the telemetry system so that it never transmits telemetry or RDF tones. In idle mode, it will still accept packet mode connections. Signed-off-by: Keith Packard commit a08e7ac8bd3840b699c9a1ffc6b1e115b2b84bad Author: Keith Packard Date: Sat Aug 20 11:35:55 2011 -0700 Bump version to 0.9.7 Bdale is flying 0.9.6 at chili blaster, make sure later firmware gets a later version number. Signed-off-by: Keith Packard commit f2b0900f8b83fcb3085f3d042ffd961ffd758d5d Author: Keith Packard Date: Sat Aug 20 11:28:53 2011 -0700 altos: Merge common config code in ao_config.c This shuffles code around in ao_config.c to share some common code segments for starting and committing config changes. This also stops printing out changes as they are made which aren't needed by the UI code. Signed-off-by: Keith Packard commit 67f28c58db0deca8f8050d33e97ad96017f4baaa Author: Keith Packard Date: Sat Aug 20 11:19:57 2011 -0700 altosui: Disable 'max flight log' config when there are stored flights When flights are stored in flash, the maximum flight log value cannot be changed as the flight data might need to be moved around in memory. Check for this case by looking for stored flights and disabling the combo box when storage is not empty. Signed-off-by: Keith Packard commit fcff63baf8fde1174571a2c7c860099e19dbf629 Author: Keith Packard Date: Sat Aug 20 10:43:28 2011 -0700 altosui: remove debug printf in pad pane Signed-off-by: Keith Packard commit 3366cfe6145f64cdb04654854d5390c671a288e3 Author: Bdale Garbee Date: Sat Aug 20 09:28:04 2011 -0600 update changelogs for Debian build commit 787e4305a05e344c018abb872f788749203690d7 Author: Bdale Garbee Date: Sat Aug 20 09:24:29 2011 -0600 update changelogs for Debian build commit 605627d03eeb9f34026a84134992ad061b5b3946 Author: Bdale Garbee Date: Fri Aug 19 22:47:50 2011 -0600 update changelogs for Debian build commit 048b3eb45169e572f33c68ff152b89db9ef97d31 Author: Keith Packard Date: Sun Aug 14 21:11:41 2011 -0700 altosui: Add 'On-board Data Logging' indicator to pad tab This shows whether the on-board data memory is full, or is ready to record the flight. This is indicated in the telemetry stream by a flight number of '0'. Signed-off-by: Keith Packard commit adb7d345963ab9981c49c7cc68c6b4d7156dce46 Author: Keith Packard Date: Sun Aug 14 21:09:42 2011 -0700 altosui: Ancient log files used 'apogee' for 'coast' state 2009-07-18-serial-004-flight-000 says 'apogee' for the apogee-detect phase of the flight; map this to coast so that this flight replays correctly (although the log terminates at apogee...) Signed-off-by: Keith Packard commit 4f64d66295a8f76680af8cfda4650aa4c4f8576d Author: Keith Packard Date: Sun Aug 14 19:19:50 2011 -0700 altos: Lost change that reported flight 0 when log memory was full commit 52ac83fedbfd380d14d4df2e79992bbdfba3552a added coded to check for a full flight log and complain with a special tone. It also reported flight 0 over telemetry, and that part of the patch got lost when moving to the new telemetry format. This patch resurrects that piece. Signed-off-by: Keith Packard commit ef7f60df841f1eb22b9cec0d7f68cf2c003d6b30 Author: Keith Packard Date: Sun Aug 14 00:00:54 2011 -0700 altosui: Respect storage limits in flight log max config Compute the maximum flight log using the data returned from the 'f' command (total storage and erase block size). Limit menu to choices which fall within this limit, complain if the user asks for too big a value. Signed-off-by: Keith Packard commit 746d6a472a20243a8c0eacc8edf8e81e0641bc17 Author: Keith Packard Date: Sun Aug 14 00:00:07 2011 -0700 altosui: don't set channel when using radio setting altos now sets the radio back to channel 0 when the radio setting is changed. Signed-off-by: Keith Packard commit 709485f20fb039f8dd087c8491c5f5a76718ae53 Author: Keith Packard Date: Sat Aug 13 23:58:03 2011 -0700 altos: use raw height while waiting for landing This avoids any noise introduced by the kalman filter, making landing detection much more reliable. This patch also changes the interval to 10s so that the height bounds can be increased to 4m. Signed-off-by: Keith Packard commit aa71c2cdcb417eba2a2d30792ece9a47b8b3fc82 Author: Keith Packard Date: Sat Aug 13 23:56:55 2011 -0700 altos: Reset radio channel to zero when using radio setting Otherwise, it's hard to set the frequency over the radio link. Signed-off-by: Keith Packard commit 7f74761051f2a5ab45b82c4dd79a8569376bbe2e Author: Keith Packard Date: Sat Aug 13 23:56:06 2011 -0700 altos: Correct AO_CONFIG_MINOR from 6 to 7 Forgot to bump this when adding radio setting. Signed-off-by: Keith Packard commit 924d56a4d2d8b16530cd378b18cfc5d6e08420ed Author: Keith Packard Date: Sat Aug 13 21:10:15 2011 -0700 altos: AltosSerial.flush_input shouldn't discard Interrupted exceptions The eeprom download code wants to interrupt serial communication so that it can stop downloading stuff in the middle of a run. Make flush_input pass the exception along instead of discarding it. Signed-off-by: Keith Packard commit dcd15032eec45f3fdd003050710ebd5b85052662 Author: Keith Packard Date: Sat Aug 13 21:09:19 2011 -0700 altosui: Eliminate inter-chunk flush_input calls Once the serial line is nicely synchronized, we don't need to flush input between chunks. This speeds up eeprom downloading quite a bit. Signed-off-by: Keith Packard commit 3ba7b6196f68078f4ed4538c4e7fe30699dfe908 Author: Keith Packard Date: Sat Aug 13 21:05:46 2011 -0700 altosui: Devices with log-format can also delete flights Any device with either flight-log-max or log-format can delete flights. Signed-off-by: Keith Packard commit 03e201e1acc8742399054e4ad36b533120ea1612 Author: Keith Packard Date: Sat Aug 13 18:39:35 2011 -0700 altosui: Add support for TeleScience eeprom download Using the existing eeprom methods, fetch and save TeleScience eeprom data, storing to a filename generated from the serial/flight from the TM connected to the TS board. Signed-off-by: Keith Packard commit 5a3e96bef31959a287b8696778d7d8cf911a7dc4 Author: Keith Packard Date: Sat Aug 13 18:36:18 2011 -0700 altosui: Clean up eeprom parsing a bit Export basic parsing and checksum functions for shared use. Create 'erased' function to check a chunk of eeprom data for data. Signed-off-by: Keith Packard commit b0ec30de37aa822ba66d25ceaa8cf8dc967b4371 Author: Keith Packard Date: Sat Aug 13 18:31:08 2011 -0700 altos: wait 10s for companion to boot In case the companion is delayed while booting, retry the setup 10 times with a 1s delay between tries. Signed-off-by: Keith Packard commit 41e5be32819d305c8268e6f992be91411ea13435 Author: Keith Packard Date: Sat Aug 13 18:30:00 2011 -0700 altos: Send serial/flight to companion board Lets the companion log them for later matching with TeleMetrum log Signed-off-by: Keith Packard commit fa7dd04741bf3fd9cedc59ed3b45b69ef9312609 Author: Keith Packard Date: Fri Aug 12 21:41:25 2011 -0700 altos: Send SPI message at flight state changes Get the companion board starting its data logging as soon as possible after boost starts. Signed-off-by: Keith Packard commit c7f540330c040c521f9d7626009a406e704a5e41 Author: Keith Packard Date: Fri Aug 12 14:58:34 2011 -0700 altosui: Add companion support to the flight UI and CSV conversion Shows the companion data in a new tab. Also put companion data into CSV file. Signed-off-by: Keith Packard commit 18369c58e62bc64b969a7cf8be3103aa33c6d4aa Author: Keith Packard Date: Fri Aug 12 06:29:13 2011 -0700 altos: Check for companion init packet validity was busted Was using board_id == ~board_id instead of board_id == ~board_id_inverse. Signed-off-by: Keith Packard commit aa642cf55c43188e9a21198d828d7ea90ff54280 Author: Keith Packard Date: Fri Aug 12 05:42:05 2011 -0700 altos: add the 'L' command to show the status of a linked companion board This prints out whether there is a board connected, along with the various values fetched from it. Signed-off-by: Keith Packard commit f87f0787fa5aa528674f3f4919eb22646c87c25a Author: Keith Packard Date: Fri Aug 12 05:41:15 2011 -0700 altos: Make sure companion task exits cleanly when done Signed-off-by: Keith Packard commit ebe2ffb29944abc4d6a35889c7b5f3d9f2871077 Author: Keith Packard Date: Fri Aug 12 05:38:16 2011 -0700 altos: Put SPI in slower mode when talking to companion board The AVR CPU on the other side just can't go very fast. This reduces the SPI clock by a factor of 16, just under 200kHz. As the companion commands are reasonably short, this shouldn't have a huge effect on overall SPI utilization. Signed-off-by: Keith Packard commit 30abbdc7ffcfc809b4a3fc31486fe968161ea225 Author: Keith Packard Date: Sat Jul 9 16:59:16 2011 -0700 altos: Add SPI-based companion board support This sends current flight state information and retrieves companion data to include in telemetry. Signed-off-by: Keith Packard commit 578c4b17b8f62f2727654ebda78ee139f9fe13fa Author: Keith Packard Date: Sat Aug 13 18:38:38 2011 -0700 altos: Don't try to use non-basestations for remote eeprom download Companion boards may also have eeprom data to fetch; don't try to use them as a radio. Signed-off-by: Keith Packard commit bf06af154e232d4caa1585a1d6d5279a075292e4 Author: Keith Packard Date: Fri Aug 12 21:43:56 2011 -0700 altos/altosui: Report log format in the version command This will make it easier to figure out what the contents of the flash should look like from altosui; the current 'guessing' mechanism will not scale to many more formats. Signed-off-by: Keith Packard commit c2f2f519dbc8ce233ab36222088c1be6b1362f01 Author: Keith Packard Date: Sat Aug 13 18:28:38 2011 -0700 altos: re-write a bit of GPS parsing code to reduce size Use a local variable while computing hdop. Place the next incoming character in data instead of pdata. Saved a surprising amount of memory. Signed-off-by: Keith Packard commit 7bcf25606cd5892d58295649f3d475d284494ee8 Author: Keith Packard Date: Fri Aug 12 05:26:09 2011 -0700 altos: shrink text space from ao_config.c Eliminate redundant config initializers by setting minor to zero and letting upgrade code handle all of the new values. Stop computing (fake) frequency when showing radio channel Stop computing feet when showing main deploy height Signed-off-by: Keith Packard commit 313d740b5284b24f1cc7a1ba5779136b55d49ebe Author: Keith Packard Date: Sat Aug 13 18:33:07 2011 -0700 libaltos: Mis-allocated device list in libaltos Would overrun mis-allocated array, causing chaos. Signed-off-by: Keith Packard commit 3b87dd6f46922cf5f98deb2dffa2148c4244e48e Author: Keith Packard Date: Sat Aug 13 15:00:14 2011 -0700 ao-tools: ao-list was crashing with more than 3 devices connected the list of devices was getting realloced for each new device, but that realloc was too small. Signed-off-by: Keith Packard commit 640422c028a2be898aa3a9048a0f6fad2e43dd8d Author: Keith Packard Date: Thu Aug 11 16:11:34 2011 -0700 altos: remove monitor disable stubs from altimeter code Monitor mode in the ground-station boards must be disabled when the radio is going to be used for another purpose, or the radio parameters changed. That places monitor-mode disable calls in other parts of the system which are shared with the altimeter code. Elide the ao_set_monitor calls for builds which do not include any monitoring code. Signed-off-by: Keith Packard commit 1d13460412046c53f36466193329caaa657bb278 Author: Keith Packard Date: Thu Aug 11 15:59:47 2011 -0700 altos: Apply igniter boot pulse-width reduction to telemini TeleMini needs the same fix as TeleMetrum to reduce startup igniter pulses. Signed-off-by: Keith Packard commit b520c32bcddabd42c07ceafa827694a3ae23a76f Author: Keith Packard Date: Thu Aug 11 15:57:58 2011 -0700 altos: Pull igniter pins low as soon as possible at boot time This reduces the pulse width on the igniter circuit caused by the default cc1111 pin configuration at powerup time. Signed-off-by: Keith Packard commit 566b16e67be38c6425e616a5c38d641c4e1a9b12 Author: Keith Packard Date: Wed Aug 10 22:43:26 2011 -0700 doc: Add 1.0 release notes. Signed-off-by: Keith Packard commit a07b07d48f71b9a11e73a82db075cc57bad0c09f Author: Keith Packard Date: Wed Aug 10 22:14:32 2011 -0700 doc: Add release notes, include them in altusmetrum doc. Shuffle altusmetrum This adds release notes and includes them in the main altusmetrum doc as well as making stand-alone html available for inclusion in the website. Signed-off-by: Keith Packard commit 5aa3e49f794ba5ed2680016f3dca47d67ae99836 Author: Keith Packard Date: Wed Aug 10 18:32:05 2011 -0700 doc: Add telemetry docs to debian/linux/mac/windows packages Signed-off-by: Keith Packard commit 7283deaa91e752acc45018ef2ea2f560b09af354 Author: Keith Packard Date: Wed Aug 10 18:22:16 2011 -0700 doc: Describe 'stats' tab in Graph UI, 'Graph Flight' button. Signed-off-by: Keith Packard commit 21837e0026c87635abf4baf2c6c574a7b274f449 Author: Keith Packard Date: Wed Aug 10 18:14:10 2011 -0700 doc: Document Ignite Mode and Pad Orientation configuration options Signed-off-by: Keith Packard commit 967c9d5ee691f87bf0d1e49ba055eb366e513e6a Author: Keith Packard Date: Wed Aug 10 17:43:58 2011 -0700 doc: Update altusmetrum.xsl for v1.0 software and TeleMini Add TeleMini references and sections as appropriate, update AltosUI docs to describe new bits. Signed-off-by: Keith Packard commit be65308182363ca87db69db530297933324f3806 Author: Keith Packard Date: Wed Aug 10 16:01:25 2011 -0700 Bump version to 0.9.6.0 Signed-off-by: Keith Packard commit 9f5623c8c32a38eaeb63fa74ab370025ac015d52 Author: Keith Packard Date: Wed Aug 10 15:00:44 2011 -0700 altosui: Move launch-sites.txt file to altusmetrum.org The official URL is now: http://www.altusmetrum.org/AltOS/launch-sites.txt Signed-off-by: Keith Packard commit 4962bcf1ce15c21a946ea718bd676b901f0f2bd0 Author: Keith Packard Date: Wed Aug 10 14:35:21 2011 -0700 altosui: Plot reasonable data from Tm files Don't plot acceleration based on baro data. Display baro speed if accel speed isn't available. Signed-off-by: Keith Packard commit 01b9352eb8ca0e4e2d023ce973c4e863cdcc0c51 Author: Keith Packard Date: Wed Aug 10 14:34:39 2011 -0700 altosui: Prune telemetry file graphs to just the flight Remove data earlier than 1 second before boost and data after landing. Signed-off-by: Keith Packard commit 9e1487b1a5db0afd1d23c86d82c60b1c1a62aab0 Author: Keith Packard Date: Wed Aug 10 14:08:21 2011 -0700 altosui: Add a 'Graph Flight' button to the 'landed' tab This lets you see the results of a flight as soon as the rocket lands using the telemetry data. Signed-off-by: Keith Packard commit 6ac604d11de44cd824f09e4b467264a2b74be7bd Author: Keith Packard Date: Wed Aug 10 13:35:26 2011 -0700 Altosui: Add flight statistics tab to graph window Provide basic flight stats alongside the flight graph. Signed-off-by: Keith Packard commit 94d9a2c36fabdf24d6a0b985851e95e4eb181fd9 Author: Keith Packard Date: Tue Aug 9 18:28:19 2011 -0700 altosui: Ship TeleMini v1.0 firmware with fat blobs Signed-off-by: Keith Packard commit a680ce61bdcffeacb7f0e4dcef71a03cb7cfe07d Author: Keith Packard Date: Tue Aug 9 18:27:19 2011 -0700 altosui: Ensure serial code tracks reply nesting correctly Trap any exceptional return conditions from 'get_reply' to make sure in_reply gets decremented. Signed-off-by: Keith Packard commit 12bfa6cc42e3689f09abae2bd2584cbacf2aa2e0 Author: Keith Packard Date: Tue Aug 9 18:26:07 2011 -0700 altosui: Don't export product defs from libaltos As we add new products, that would change the ABI generated for java, invaliding old library versions sitting around for windows and mac. Signed-off-by: Keith Packard commit 81ad44d4b6d9ad2f6b91d0906e8543da82da424f Author: Keith Packard Date: Tue Aug 9 14:26:43 2011 -0700 altos: Switch telemini from v0.1 to v1.0 TeleMini production boards are firmware compatible with the v0.1 design, so instead of creating another product, just rename the existing one. Signed-off-by: Keith Packard commit f3985ef8bc69bcec13ce155567a8ed7c5c6051cb Author: Keith Packard Date: Mon Aug 8 20:41:34 2011 -0700 altosui: Add close button to 'fire' dialog Easier to hit than the tiny close box in the frame. Signed-off-by: Keith Packard commit cbf54a826d12c49b1b1996be247869d5ff4e2236 Author: Keith Packard Date: Mon Aug 8 20:38:44 2011 -0700 altosui: Make set of telemetries to use while scanning configurable with a preference to remember across application runs. Signed-off-by: Keith Packard commit 7146311d9df541e075b4450cf9656a9aa7ffdd93 Author: Keith Packard Date: Mon Aug 8 20:38:14 2011 -0700 altosui: Reading serial from swing thread only bad if remote Make the warning on this condition based on whether the link is remote. Signed-off-by: Keith Packard commit 2662c577a895c96fce7b2bf815b9e752d2dfbde6 Author: Keith Packard Date: Mon Aug 8 18:53:59 2011 -0700 altosui: Remove unused AltosConfigData from AltosTelemetryReader Now that AltosSerial manages this data, it's not needed here. Signed-off-by: Keith Packard commit 13eacb49de4312509c3a729a31dcda4d601f8a8b Author: Keith Packard Date: Mon Aug 8 18:53:27 2011 -0700 altosui: Flush radio setting to serial device When changing frequencies, make sure the device hears about it. Signed-off-by: Keith Packard commit 97cf285d041062ae473c2823438b81c8fffe7f67 Author: Keith Packard Date: Mon Aug 8 18:53:03 2011 -0700 altosui: Remove debugging printfs from AltosSerial Signed-off-by: Keith Packard commit 364102d29ff4de0c252774f26417587fa88b7467 Author: Keith Packard Date: Mon Aug 8 18:52:11 2011 -0700 altosui: Show AltosFrequency in scan results Include frequency and description instead of just frequency. Signed-off-by: Keith Packard commit d4cc16e111229b02d1081e2693ace0b33f662498 Author: Keith Packard Date: Mon Aug 8 18:51:16 2011 -0700 altosui: Save frequency after setting it in AltosFlightUI Otherwise we'll just save the old frequency. Signed-off-by: Keith Packard commit 81bb6f42d8b859195ea5a35806c42d98ba82e8e1 Author: Keith Packard Date: Mon Aug 8 18:49:45 2011 -0700 altosui: Have single radio_to_frequency function This takes all three radio params (setting, cal, channel) and computes the current frequency. Signed-off-by: Keith Packard commit c8c01684fa011acf3bbe5c3ebbc84aa8e8457a5e Author: Keith Packard Date: Mon Aug 8 18:47:36 2011 -0700 altosui: A few misc cleanups. Initialize radio_setting as it won't be set for older devices ever. Remove unused set_radio_frequency function from AltosConfigUI. Signed-off-by: Keith Packard commit dd383b86b9a13d7af2d6b07f4fb85ccc666ed898 Author: Keith Packard Date: Mon Aug 8 18:45:36 2011 -0700 altosui: Must set radio calibration before radio setting Setting the radio calibration erases any previous radio setting as the radio calibration change invalidates any previously computed radio setting for a specific frequency. Hence, the radio setting must be configured *after* the radio calibration value lest it be ignored. Signed-off-by: Keith Packard commit 40544dbfe09c64f7764a5f0686415805611fab25 Author: Keith Packard Date: Mon Aug 8 17:46:04 2011 -0700 altos: minor type in comment about accel correction Kurt Roeckx found a typo in the equations describing how the accelerometer is corrected by the 5V reference measurement. Signed-off-by: Keith Packard commit a315b200cd0da1a964f5395cd59660be1b49672b Author: Keith Packard Date: Mon Aug 8 12:31:48 2011 -0700 altosui: Pull out BlueTooth support This leaves the code in place, but commented out so that it isn't used until we've got a bluetooth device ready for use. Signed-off-by: Keith Packard commit a65daf94e8fe3e22f770ef76d9104c3dd11d0330 Author: Keith Packard Date: Mon Aug 8 12:25:30 2011 -0700 altosui: altimeter is not spelled altimter Signed-off-by: Keith Packard commit 84ba927f503f81543dec286c4881be30bb5e60c5 Author: Keith Packard Date: Mon Aug 8 02:05:28 2011 -0700 Set version to 0.9.5.0 Make the frequency-based systems distinct Signed-off-by: Keith Packard commit 0e3e4f9c1e6a6bf972514f12c9d622258aa2aec2 Author: Keith Packard Date: Mon Aug 8 01:47:29 2011 -0700 altosui: Convert from channels to frequencies Major areas: * Preferences are stored as frequencies instead of channels * Serial configuration is done using frequencies * UI is presented with frequency lists Signed-off-by: Keith Packard commit f03ca0ab8799bfa5100eaa2577cfd7b9c37d05bf Author: Keith Packard Date: Sun Aug 7 14:52:29 2011 -0700 altosui: Add dialogs to configure 'common' frequencies These are stored in preferences, but not yet hooked up to the TM/TD configure dialogs Signed-off-by: Keith Packard commit ba5dc35388d28c5769eaabc970c4d4b8c2c2ff9c Author: Keith Packard Date: Wed Aug 3 23:07:53 2011 -0700 altos: Add ability to set arbitrary radio frequency This adds a separate config parameter to control the raw radio frequency setting, allowing the user to select an arbitrary frequency instead of being forced to choose one of the 10 pre-defined 'channels'. Signed-off-by: Keith Packard commit e1e5c9b3e24670e9f58c6f7389eafb3338efdb40 Author: Keith Packard Date: Mon Aug 8 12:08:45 2011 -0700 altos: Remove pad_orientation functions from non-accel devices Anything without an accelerometer can't detect pad orientation. Signed-off-by: Keith Packard commit 7207a95823dc2a27906759528dd88256cb20679f Author: Keith Packard Date: Mon Aug 8 12:04:00 2011 -0700 altosui: Change button to 'Configure Altimeter' Now that we've got more than one model. Signed-off-by: Keith Packard commit 30670732ca3f5a34025ab4bc4c69afa45637b4d6 Author: Keith Packard Date: Mon Aug 8 11:58:23 2011 -0700 altos: Correct flight log max on Tm to 5k Was using the wrong #define name to check for Tm/Tn devices that use internal flash for data storage. Signed-off-by: Keith Packard commit a67c16958df8e60b131b01e00fd5bca590af0e7d Author: Bdale Garbee Date: Mon Aug 8 09:38:53 2011 -0600 update changelogs for Debian build commit 4a507898d6de631bb2e8ed4aa3e0933d97222323 Author: Bdale Garbee Date: Mon Aug 8 09:34:59 2011 -0600 rewind changelog for re-build of 0.9.4.5 commit 5082b4998b8a9787e0e2f4d96d912e434aa9b81a Author: Bdale Garbee Date: Mon Aug 8 09:31:18 2011 -0600 clean up all existing lintian warnings commit f26c7172a1b2b5344fae6ede562f2da7a56b80e3 Author: Bdale Garbee Date: Mon Aug 8 07:54:14 2011 -0600 build depend on bluetooth dev package commit 3cad81b0ebb52352c66643a2587e94a2b693a2d2 Author: Bdale Garbee Date: Mon Aug 8 07:38:48 2011 -0600 stop doing automatic tag push during builds commit ebaad64525119c0fdacf382adc2c99e5df5be23f Author: Bdale Garbee Date: Mon Aug 8 07:37:23 2011 -0600 update changelogs for Debian build commit 6f9f75cbfccf975204ab847ca0e9cf86188716c6 Author: Bdale Garbee Date: Mon Aug 8 07:35:47 2011 -0600 update changelogs for Debian build commit 7c94945690a6ff5cbf872026fd6411a30089c7b1 Author: Bdale Garbee Date: Mon Aug 8 07:33:09 2011 -0600 simplify version in last changelog entry so git-dch is less confused commit 6d5e5b0be237d5448aa9d15decd6127cf41ca7b2 Author: Bdale Garbee Date: Mon Aug 8 07:30:42 2011 -0600 update version for a Bdale build for use turning on TeleMini v1.0 commit 6492218fc316f8cf6214a577807a8dd0a80a9b6a Author: Keith Packard Date: Tue Aug 2 19:07:56 2011 -0700 altos/altosui: Add pad orientation configure option Allow TeleMetrum to be operated with the antenna pointing downwards on the pad. This provides some additional flexibility when designing an ebay. The accelerometer calibration levels are flipped around to match, so no re-calibration should be required. Signed-off-by: Keith Packard commit 11a2bb8e28df7ed87542f2ee726f877971f5d52a Author: Keith Packard Date: Tue Aug 2 17:41:53 2011 -0700 altosui: Add idle monitor dialog This monitors a telemetrum device in idle mode, either directly or through a teledongle, allowing the GPS status and batteries to be monitored without resorting to placing the device in pad mode. Signed-off-by: Keith Packard commit 3cc2eed6cdafe788a8617ab45c6664077e76411e Author: Keith Packard Date: Tue Aug 2 18:01:52 2011 -0700 altosui: Simple timeouts don't work with query data To get the query to come back, it's best to abort and retry the command, other wise the command may have been lost to the previous connection. Signed-off-by: Keith Packard commit 37c41c962ea4631e62307a57d2ce6572b87fd743 Author: Keith Packard Date: Tue Aug 2 17:41:02 2011 -0700 altosui: Parse accel cal from 'c s' command These fields weren't used before, so the code to parse them hadn't been written. Signed-off-by: Keith Packard commit 95201e7fe4a6a7ec42321e8dbad3aea3bbf4c840 Author: Keith Packard Date: Tue Aug 2 17:40:02 2011 -0700 altosui: Standard text field in flight UI needs more width (now 20) Latitude and longitude take more than 16 characters. Signed-off-by: Keith Packard commit 82e04a0e3a3296288a524ec582785a36fd644331 Author: Keith Packard Date: Tue Aug 2 02:09:23 2011 -0700 altos: Require sequencing through 'main' state before landing The old version of the code would permit the flight to go straight from 'drogue' to 'landed' without passing through 'main' at all. This meant that a false landing detection would leave the main charge unfired, potentially causing the airframe to land on drogue alone. Requiring that the flight sequence pass through main ensures that the main charge will get fired at the right time, although if the airframe lands higher than that altitude, it will not go to 'landed' mode ever. Signed-off-by: Keith Packard commit 6c55bf35b11ae3ddae152795072d69e98184bac1 Author: Keith Packard Date: Tue Aug 2 01:49:35 2011 -0700 altos: Reduce height averaging filter time constant Using the longer time constant could lead to false landing detection just after apogee, which is definitely not a good idea. Signed-off-by: Keith Packard commit e19a117b99e8374ca0e8e35948e23bc672ad1a32 Author: Keith Packard Date: Mon Aug 1 22:33:38 2011 -0700 altos: Average height values for landing detection Instead of using the direct output of the kalman filter and hoping that is quiet enough to detect landing, filter that with a long exponential decay filter and then check to make sure that doesn't change more than 2m in 5 seconds as a trigger for landing detection. Tested with existing telemetrum flight logs and it correctly detects landing in all cases. Signed-off-by: Keith Packard commit 146a0ab223e8d9b376125d1e59f597f6d7851a9b Author: Keith Packard Date: Sun Jul 17 18:49:55 2011 -0700 altos: Add ability to read new TELEM files to ao_flight_test Not that telem files are currently very useful as the kalman filter gets completly confused by the variable steps caused by missing data, but... Signed-off-by: Keith Packard commit 6795d353be91df96a571cebc237e6a54a065a380 Author: Keith Packard Date: Sun Jul 17 16:44:10 2011 -0700 altosui: Change continutity colors to yellow/magenta Makes them stand apart from the accel/speed lines Signed-off-by: Keith Packard commit 7f6cce5749724dbb836aaa27bbeedf977106f6f3 Author: Keith Packard Date: Sun Jul 17 16:43:41 2011 -0700 Add HARA Bragg Farms site Signed-off-by: Keith Packard commit 6796d9e253a808824ba32cdb008da8bf302780fc Author: Keith Packard Date: Sun Jul 17 15:53:13 2011 -0700 Fix NCR Pawnee location Signed-off-by: Keith Packard commit ddef3e4ec1b3ff86b164f83807c34c2a78f73eb8 Author: Keith Packard Date: Sun Jul 17 15:45:07 2011 -0700 altosui: Mark preload site location with red circles (like launch) Just to show where on the map the official launch location is. Signed-off-by: Keith Packard commit 1f3f3d575572eff33a2bc7a53d4691e59a428450 Author: Keith Packard Date: Sun Jul 17 15:09:55 2011 -0700 altosui: Add a bunch more site locations BALLS, Rio Rancho, METRA, QRS Cedar Grove and Hudson Ranch Signed-off-by: Keith Packard commit fef42e0d9e0a20bdbd32e052749fc63575515e1c Author: Keith Packard Date: Sun Jul 17 11:29:13 2011 -0700 altosui: Add launch-sites.txt Contains a few of our favorites. Signed-off-by: Keith Packard commit 81cac174c80ee42d9e94c6500da7c4c760c3ce67 Author: Keith Packard Date: Sun Jul 17 11:25:47 2011 -0700 altosui: Download list of site locations for map preloading The current URL for this is: http://gag.com/~keithp/launch-sites.txt The format is: :: lat and lon are both in signed decimal degrees. Signed-off-by: Keith Packard commit f7cd8317bf78ece334e1ceb0263b875ca43bbbd2 Merge: 51796e2 a482d90 Author: Keith Packard Date: Sun Jul 17 08:17:44 2011 -0700 Merge branch 'preload-maps' commit 51796e2f1ebce3ee8dc1ac90648381410c1379ee Author: Keith Packard Date: Mon May 23 11:32:29 2011 -0700 altos, altosui: Add igniter mode (dual, apogee, main) This provides for redundant charges for either apogee or main. Signed-off-by: Keith Packard commit 1332ed55192f22525f31574f60fae4c6579e6f7f Author: Keith Packard Date: Sun Jul 17 08:13:15 2011 -0700 Set version to 0.9.4.4 Signed-off-by: Keith Packard commit a482d904a3f391c3a24df3660acb3f3696aa6766 Author: Anthony Towns Date: Sat Jul 16 23:08:49 2011 -0700 altosui: Make sure degree and minute values are visible (map preload) Set min size to preferred size so that the value remains visible instead of snapping to 0 pixels wide. Signed-off-by: Keith Packard commit 1681c57cbbfc5214dbc2a519e54ce9f29ffe3921 Author: Keith Packard Date: Sat Jul 16 22:43:34 2011 -0700 altosui: Remove a bunch of sitemap debugging printfs Seems to work, let's get less chatty Signed-off-by: Keith Packard commit 0a4d934f6e2914bfe2d965630543f029a1576c11 Author: Keith Packard Date: Sat Jul 16 22:34:44 2011 -0700 altosui: Display full map preload area in view. This involved fixing the map view to support arbitrary sizes, and then exposing a synchronous tile loading API so that the progress bar could be used to show tile loading progress. Signed-off-by: Keith Packard commit abb8510b97ce9cbbff0275cc31f74780fe1ce138 Merge: 0929ee3 00e6981 Author: Keith Packard Date: Sat Jul 16 21:06:37 2011 -0700 Merge branch 'scan-telemetry' into preload-maps commit 00e6981c2e0a668864fcf391932855cd8942140c Author: Keith Packard Date: Sat Jul 16 21:05:06 2011 -0700 altosui: Flush telemetry lines before starting to watch for scan results This prevents pending telemetry lines from being incorrectly attributed to the wrong channel/telemetry. Signed-off-by: Keith Packard commit 0929ee32f753255cbe1474988cb41a5a86d29a0e Author: Keith Packard Date: Sat Jul 16 17:37:20 2011 -0700 altosui: Try to avoid resize weirdness with map preloading grid bag + box does some strange stuff, this appears to avoid the worst of the interactions. Signed-off-by: Keith Packard commit 225073fd822f9861a83d65386c29fda9b37bf273 Author: Keith Packard Date: Sat Jul 16 16:37:40 2011 -0700 altosui: Add map preloading GUI Provide a way to manually enter latitude and longitude, preview the map area while downloading a 9x9 grid of map tiles to be used when monitoring flights without network access. Signed-off-by: Keith Packard commit cbd14ba103ee5e3c5eec18e3a4ff13c320b98634 Author: Keith Packard Date: Sat Jul 16 20:44:51 2011 -0700 altosui: Set 'seen' bits in legacy telemetry packet reader Otherwise, the 'scan' code won't show detected flight computers. Signed-off-by: Keith Packard commit e905042879147dd86241bf2dcc7437e5a6eb7578 Author: Keith Packard Date: Sat Jul 16 20:43:57 2011 -0700 altosui: Initialize channel and telemetry before use in ScanUI Otherwise we try to use telemetry format 0, which means 'no telemetry'. Signed-off-by: Keith Packard commit 941b90a4905e34936d24a25ca90ac04eb6f5a792 Author: Keith Packard Date: Sat Jul 16 17:38:00 2011 -0700 altosui: Generalize and centralize telemetry constants, parse v0.8 telemetry Move telemetry constants to Altos class, adding functions to compute names and lengths. Generalize users of these values to use all of the known values. Add support for v0.8 TeleMetrum telemetry Signed-off-by: Keith Packard commit 7ef786276b5d5c7d17c3fe4f36aa41db61a9742f Author: Keith Packard Date: Sat Jul 16 14:23:08 2011 -0700 altosui: Finish radio scanning UI Scans all channels and telemetry formats, presenting visible devices in a list. Entries from the list may be selected, in which case a monitor window pops up with the appropriate configuration. Signed-off-by: Keith Packard commit ebcba28b3c09925869b617880d2919e5d0e059f0 Author: Keith Packard Date: Sat Jul 16 14:19:41 2011 -0700 altosui: Configuration telemetry record includes flight number Mark the reported altos record as including flight information. Signed-off-by: Keith Packard commit d4375bc737655546c2d40f49acdfc2e60ebfea5a Author: Keith Packard Date: Sat Jul 16 14:19:14 2011 -0700 altosui: Remove debugging printf from AltosLog Signed-off-by: Keith Packard commit f32a55ac9a3ebbde2b41782f22491e72258fe05a Author: Keith Packard Date: Sat Jul 9 19:00:12 2011 -0700 altosui: Pop up monitor window from scan dialog Signed-off-by: Keith Packard commit 8c20030ea4eb8e068e1ba88e01d07dfbc27bd7db Author: Keith Packard Date: Sat Jul 9 18:41:15 2011 -0700 altosui: Start adding support for scanning radio for available devices This is untested. Signed-off-by: Keith Packard commit 7bb11b716ccb6c80701bc3f34ecf9bef97cbbfc9 Author: Keith Packard Date: Fri Jul 15 18:53:41 2011 -0700 Set version to 0.9.4.3 for Bdale 2011-7-16 flights Signed-off-by: Keith Packard commit 0d0cf6f9a1b14a1b66aee3845964cd33d1f035c2 Author: Keith Packard Date: Sat Jul 9 13:09:57 2011 -0700 altos: new versions of sdcc require __ prefixes for custom keywords Fortunately, 2.9.1 appears to accept either, so we can switch now and prepare for sdcc 3.0.0. Signed-off-by: Keith Packard commit 8f80f5705d64469bcfb00ff11aee68364edb271b Author: Keith Packard Date: Wed Jul 6 21:38:57 2011 -0700 altosui: Don't show missing igniter and gps values The new telemetry stuff leaves state.gps always set (but empty), which seems fine, we just need to look at state.gps.connected to see if there's a GPS receiver on board. For TeleNano, we also want to hide the igniter status fields as they won't have any data present. Signed-off-by: Keith Packard commit 80ca066a825646f833ca609190c76c5252118d9a Author: Keith Packard Date: Wed Jul 6 21:36:38 2011 -0700 altosui: Build device constants into .java code This eliminates a depedency on updates to the system helper library, which means we don't have to provide a new library on all platforms just to support a new USB id. Signed-off-by: Keith Packard commit 504ab7ab355652d5d01094c927089029596a0753 Author: Keith Packard Date: Wed Jul 6 17:49:01 2011 -0700 altos: product defines are always in ao_product.h When all products were built in a single directory, each one had a separate version of ao_product.h. Now that they all reside in sub-directories, each directory has its own ao_product.h This change is needed so that other modules in the system can use the product defines; otherwise, ao_product.h was not built at the right time. Signed-off-by: Keith Packard commit 81cf2e833bedbc1ace8fd310e9e94bfb7673d428 Author: Keith Packard Date: Wed Jul 6 16:43:17 2011 -0700 altos: Ensure low-rate telem packets interleave with sensor telem packets To avoid over-committing the radio link, we want to send only one low rate packet after each sensor packet. However, the initializations for this were incorrect, causing the configuration and location packets to be sent at the same time. Signed-off-by: Keith Packard commit 5ca6400fd8a360b64d8f96f50d5595a7fd17762d Author: Keith Packard Date: Wed Jul 6 16:18:54 2011 -0700 altos: Remove ao_telemetry_orig.c and ao_telemetry_tiny.c All products use the common ao_telemetry.c code now Signed-off-by: Keith Packard commit 0154d13756bcb09f009981ee5e4bd27fd04b8788 Author: Keith Packard Date: Wed Jul 6 16:19:22 2011 -0700 altos: Switch Tm and Tn to common telemetry code Signed-off-by: Keith Packard commit b65140a0139075adeddaccf0f4d5c7a75fac4757 Author: Keith Packard Date: Wed Jul 6 15:52:25 2011 -0700 altos: Switch flash drivers __xdata to __pdata Signed-off-by: Keith Packard commit 038d7b25ba833da4be458409670d3f95e8aaf17b Author: Keith Packard Date: Wed Jul 6 15:51:52 2011 -0700 altos: Switch ao_flight and ao_flight_nano __xdata to __pdata Signed-off-by: Keith Packard commit 3742b36a528f114c3b1873caa4f39581145b76da Author: Keith Packard Date: Wed Jul 6 15:28:01 2011 -0700 altos: Switch ao_dbg.c __xdata to __pdata Signed-off-by: Keith Packard commit 6903b6464db7eb803de8bf9b897c45431f7a1d63 Author: Keith Packard Date: Wed Jul 6 15:27:32 2011 -0700 altos: Switch ao_config.c __xdata to __pdata Signed-off-by: Keith Packard commit 6893752900385ee51cc4cf75e1b672202de7578a Author: Keith Packard Date: Wed Jul 6 15:26:09 2011 -0700 altos: switch ao_cmd __xdata to __pdata Saves code space Signed-off-by: Keith Packard commit 2ec986f08ce8d4635f4435bb0042b405d93edc40 Author: Keith Packard Date: Wed Jul 6 15:45:04 2011 -0700 altos: Switch const for __code in struct ao_cmds This saves quite a bit of code space when accessing these values. Signed-off-by: Keith Packard commit 355db71f4511adff8abcb2caded61c12fe8b7ee9 Author: Keith Packard Date: Wed Jul 6 15:41:32 2011 -0700 altos: Switch ao_usb.c __xdata to __pdata Signed-off-by: Keith Packard commit 359baab005c274a0841268c615c23b3ffef813cf Author: Keith Packard Date: Wed Jul 6 15:41:06 2011 -0700 altos: Switch ao_telemetry.c __xdata to __pdata Signed-off-by: Keith Packard commit f2f8ade6994aa3a69fd08f19c4403ceb8cea295d Author: Keith Packard Date: Wed Jul 6 15:39:44 2011 -0700 altos: Switch ao_stdio.c __data to __pdata Signed-off-by: Keith Packard commit 9ba0da9247ea424a7a147aa85daae0d5e6316b81 Author: Keith Packard Date: Wed Jul 6 15:38:46 2011 -0700 altos: Switch ao_serial.c __xdata to __pdata Signed-off-by: Keith Packard commit 86b41d4c2b8a9fa4507cdb75302e0cedebb103cb Author: Keith Packard Date: Wed Jul 6 15:38:29 2011 -0700 altos: Switch ao_sample.c __xdata to __pdata Signed-off-by: Keith Packard commit 803bf106caf5d6b5ac12eb00a941647c7325edd1 Author: Keith Packard Date: Wed Jul 6 15:37:34 2011 -0700 altos: Switch ao_rssi.c __xdata to __pdata Signed-off-by: Keith Packard commit 002f167fc2709aaf1a4984aaa0a3519a97749d5f Author: Keith Packard Date: Wed Jul 6 15:37:15 2011 -0700 altos: Switch ao_report.c __xdata to __pdata Signed-off-by: Keith Packard commit 5203ddaac692bfd82a01368da9fb66c25e9e14c1 Author: Keith Packard Date: Wed Jul 6 15:36:45 2011 -0700 altos: Switch ao_log.c and ao_log_big.c __xdata to __pdata Signed-off-by: Keith Packard commit 62267144d189967fcd0724b6dfbdbab3cb6fb414 Author: Keith Packard Date: Wed Jul 6 15:33:52 2011 -0700 altos: Switch ao_ignite and ao_gps_sirf __xdata to __pdata Signed-off-by: Keith Packard commit 92047ff86c79c2b18ef565a4560b06fe00d6f159 Author: Keith Packard Date: Wed Jul 6 15:31:53 2011 -0700 altos: Switch ao_gps_skytraq and ao_gps_sirf __xdata to __pdata Signed-off-by: Keith Packard commit 64860be02b3efa6f784a259249cfa6d14545fbd3 Author: Keith Packard Date: Wed Jul 6 13:49:05 2011 -0700 altos: Shrink ao_add_task by rolling up a memset loop This has a dramatic effect. By pulling the 'stack' variable into registers it reduces the size of this function from 550 to 231 bytes. Signed-off-by: Keith Packard commit 480b48837db31987b947e4d32248965d4a16be03 Author: Keith Packard Date: Wed Jul 6 13:21:25 2011 -0700 altos: Shrink ao_config_callsign_set Replacing a hand-coded memset with a function call, using static space instead of stack space for an array. Signed-off-by: Keith Packard commit 41c230cac359b4459ca93196d08704b7d35447c7 Author: Keith Packard Date: Wed Jul 6 12:38:11 2011 -0700 altos: Shrink ao_cmd_put16, ao_cmd_hex and ao_cmd No functional changes, just reduces code size. Signed-off-by: Keith Packard commit 481577a29380afe6750ef7c4e928daff837cbc49 Author: Keith Packard Date: Tue Jul 5 23:38:42 2011 -0700 altosui: Compress telemetry records marked with the same time Split telemetry transmits multiple packets with the same timestamp. Merge those into a single record when read from a file. Signed-off-by: Keith Packard commit 7cfd43663cde5ebdf04e4face076d79ff6329ac3 Author: Keith Packard Date: Tue Jul 5 23:38:28 2011 -0700 altosui: Remove debug printf. Signed-off-by: Keith Packard commit d0335f83c54df0b23c28d04d34c212a1bdffadd0 Author: Keith Packard Date: Tue Jul 5 23:37:51 2011 -0700 altosui: Add main/drogue voltages to default graph Until we get a UI for changing the graph elements, lets add a few more potentially useful values. Signed-off-by: Keith Packard commit c1f859170b37864b816eb561318dbfb1cafaeed6 Author: Keith Packard Date: Tue Jul 5 23:37:00 2011 -0700 altosui: Elide missing values from graphs Signed-off-by: Keith Packard commit 72575dcb9cfbb5c1ccdb3510b9962a6f60ca3fa3 Author: Keith Packard Date: Tue Jul 5 23:35:50 2011 -0700 altosui: Elide nul bytes at end of telemetry string values All telemetry fields are fixed length, so any embedded strings are padded with nul bytes. Signed-off-by: Keith Packard commit 6ac34f9c8efd464194137ac4ce8228bf9d7d83be Author: Keith Packard Date: Tue Jul 5 23:35:02 2011 -0700 doc: Add section about TeleDongle USB line format Describe the format of the TELEM lines sent over USB from TeleDongle to the host. Signed-off-by: Keith Packard commit edf6252450e06fd42fa6dde3acd127baa8fa6d36 Author: Keith Packard Date: Tue Jul 5 21:44:53 2011 -0700 altos: Adapt to changes in telemetry Configuration packet Apogee delay added. flight_log_max changed to two bytes (in kB now). Signed-off-by: Keith Packard commit 938949e39aac834a1c0912f8f307f74fe41418cc Author: Keith Packard Date: Tue Jul 5 21:42:22 2011 -0700 doc: Chang Config and Location packets Config packets get apogee delay, and have flight_log_max shrunk to two bytes. Location packets get climb_rate added. Signed-off-by: Keith Packard commit 4132ac5896114e5f3d8fb3f219422e8933078cf4 Author: Keith Packard Date: Tue Jul 5 21:41:44 2011 -0700 altosui: Parse remaining standard telemetry packets Signed-off-by: Keith Packard commit ef3ce687d73c1274ce5368432f4d449b063ce5c0 Author: Keith Packard Date: Mon Jul 4 23:39:21 2011 -0700 altos: Complete new telemetry switchover This involved rewriting the GPS code to use the telemetry structures directly so that a memcpy could be used to transfer the data to the telemetry packets, saving a bunch of code space, along with fixing up the gps testing programs to deal with the structure changes. In addition, the teledongle code needed to have the monitoring code split into separate radio receiver and USB writer threads as the packets are now back-to-back, and hence come too fast to wait for the USB data to be sent to the host after each one. Signed-off-by: Keith Packard commit 359681f23e2f71bc8f4975a4a76ae28c08ecab2e Author: Keith Packard Date: Mon Jul 4 18:09:03 2011 -0700 altos: Add split telemetry code This sends every packet every time, which isn't correct, but should be useful for testing. Signed-off-by: Keith Packard commit b51e5466f7a125db873edd1fa9bd3881d7e98aad Author: Keith Packard Date: Mon Jul 4 18:08:19 2011 -0700 altos: Shrink help text Reduce const space taken by command help text. Signed-off-by: Keith Packard commit 9e5e4c1ad82d621ceb7286f72c87eeaf5976f9bf Author: Keith Packard Date: Mon Jul 4 18:06:48 2011 -0700 altos: Add sat info to GPS report command Plan to use this to report current flight computer state in idle mode. Signed-off-by: Keith Packard commit 06b6f78e22be38a26bfe11ed4d4b659d5b13f00c Author: Keith Packard Date: Mon Jul 4 18:04:49 2011 -0700 altos: Shrink const space in ao_config Eliminate separate 'cmd' and 'help' struct entries. Use \0 trick in cmd strings to eliminate whitespace. Edit help text. Signed-off-by: Keith Packard commit d3c26e534d8df34cfbf29b70cd1b2692493ce150 Author: Keith Packard Date: Mon Jul 4 18:03:51 2011 -0700 altos: teledongle does not need ao_packet_slave.c TeleDongle doesn't provide slave interfaces, so remove ao_packet_slave from the TD build Signed-off-by: Keith Packard commit c763a3f9cf2bf055e9705ce5ff4bc172f445037d Author: Keith Packard Date: Mon Jul 4 18:02:52 2011 -0700 Version strings must be < 8 bytes long The new telemetry packets include the version string, so make sure its less than 8 characters long Signed-off-by: Keith Packard commit a08173197d5533ecb395102ed34e751135660d06 Author: Keith Packard Date: Mon Jul 4 18:01:59 2011 -0700 doc: Fix a few minor telemetry doc mistakes Multiple 'accel' entries in the Sensor packet. Swap ground_accel and ground_pres to group accel cal data Signed-off-by: Keith Packard commit 98df3ba984acf3b47a09949bbea0f3264f711f5b Author: Keith Packard Date: Mon Jul 4 14:17:55 2011 -0700 doc: Complete initial telemetry description Finish describing the contents and modulation scheme for telemetry data. Signed-off-by: Keith Packard commit 06e82bd2c2a5eea153a053e542df9bc3537e9a01 Author: Keith Packard Date: Sat Jul 2 01:50:33 2011 -0700 doc: Add telemetry format description Document the telemetry packet contents. Signed-off-by: Keith Packard commit 7fd9b8f720add559b262e81d61ededc9df16ca94 Author: Keith Packard Date: Tue Jun 28 01:03:00 2011 -0700 altosui: Support raw telemetry from TeleDongle Use raw telemetry frames when TeleDongle supports them, this involves parsing the hex dump of the packet instead of having teledongle take the packet apart. Only the legacy format is working at this point; the altos bits for the new split telemetry frames is not written yet. Signed-off-by: Keith Packard commit cb239b7161feea8646425b1f5788c3c82ae24321 Author: Keith Packard Date: Tue Jun 28 01:01:08 2011 -0700 altos: ao_radio_recv needs byte count *including* rssi and status That's two more than the actual packet length. Signed-off-by: Keith Packard commit 336224a08327cadc95f6e5b564a4ddc64aaad8f8 Author: Keith Packard Date: Fri Jun 24 08:31:51 2011 -0700 altos: Start adding new telemetry frame definitions These use the initial 24 bytes per frame plan, which will probably get changed to 32 bytes per frame. Signed-off-by: Keith Packard commit 5e111fdf1f23203baeeb490ae1b69402ebd513b8 Author: Keith Packard Date: Fri Jun 24 08:31:12 2011 -0700 altos: Add checksum to TELEM output lines Verify the received telemetry lines to protect against OS data loss Signed-off-by: Keith Packard commit 489a68ba8e3bc360e2e8fc887e4c4b840b5a0dd3 Author: Keith Packard Date: Wed Jun 22 12:27:34 2011 -0700 altos: Add arbitrary telemetry packet monitoring This adds the ability to monitor arbitrary telemetry packets (up to 128 bytes), moving the telemetry data parsing up to the host. Signed-off-by: Keith Packard commit 0e67b6890dd3a06665239f8dfd2e69266d055e46 Author: Keith Packard Date: Wed Jun 22 12:26:45 2011 -0700 altos: Rename telemetry to telemetry_orig This makes room to create a new multi-packet telemetry format without changing anything yet. Signed-off-by: Keith Packard commit dc0b49dcbaa2d0a69e002c151337b6e9fd3060d9 Author: Keith Packard Date: Thu Jun 2 23:16:30 2011 -0700 altosui: Handle old TeleDongle receiving kalman telemetry packets The telemetry packets now send the kalman height/speed/accel values instead of the ad-hoc values. If received by an old TeleDongle box, the speed value will be of the form 0x8000abcd, which will be printed as a 32-bit value by TeleDongle. We only want the abcd part, which is the speed * 16. Detect this automatically and compute the correct values for all three. Signed-off-by: Keith Packard commit 4d27e281f81aee88adff3d84085356ec310e4b92 Author: Keith Packard Date: Wed May 25 21:38:02 2011 -0600 Switch version to 0.9.4 For Mayhem, so we can tell what version each board is running Signed-off-by: Keith Packard commit 479bdffa35d0b8d4e48868c8d20f3cb1549521ab Author: Keith Packard Date: Fri May 6 23:55:23 2011 -0700 Revert "altos: Debugging TBT issues -- check pin configuration after boot" This reverts commit 514348055630edec12224c4b0964240b929759a3. Looks like this was never a problem. commit 66bdf0e066bc0bb7a326a6c2a9c88b69e5c1be66 Author: Keith Packard Date: Fri May 6 23:12:47 2011 -0700 altos: clear CPU port 1 interrupt flag when handled Signed-off-by: Keith Packard commit 8be559baa979c15e78f8dba7879b383dbe3936d3 Author: Keith Packard Date: Fri May 6 22:59:15 2011 -0700 altos: Hook up the P1 ISR for TeleBT v0.1 bt_link line Otherwise, we're heading off into the weeds... Signed-off-by: Keith Packard commit 23f441b95e55fbee709382b05d325bc021285766 Author: Keith Packard Date: Fri May 6 22:49:54 2011 -0700 altos: Initialize beeper for telebt Needed to get sounds to come out Signed-off-by: Keith Packard commit 514348055630edec12224c4b0964240b929759a3 Author: Keith Packard Date: Fri May 6 22:42:58 2011 -0700 altos: Debugging TBT issues -- check pin configuration after boot Make sure the serial pins are configured as peripherals Make sure the ser_reset and bt_link pins are going the right direction. Signed-off-by: Keith Packard commit 22e3ac0eb014b8255029763ae8180ad3527ba306 Author: Keith Packard Date: Fri May 6 22:42:32 2011 -0700 altos: Add beeper to TBT v0.1 It's available, let's use it. Signed-off-by: Keith Packard commit 6d858b64ee0e8c227c149d2af6d2d634536964f4 Author: Keith Packard Date: Fri May 6 22:12:31 2011 -0700 altos: pull TBT v0.1 ser_reset line low This line resets the BT module if held low for three seconds. Signed-off-by: Keith Packard commit 3336d0f726afd1d43cf62280940e5fb91dab2e91 Author: Keith Packard Date: Fri May 6 21:13:19 2011 -0700 altos: Fix BT link status pin for real TBT hardware The prototype used P2_1, while the real hardware uses P1_7. Lots of defines to make this work... Signed-off-by: Keith Packard commit 19bfa3882a2d95fcade256c2d63ad24f794281e5 Author: Keith Packard Date: Fri May 6 20:33:58 2011 -0700 altos: Use USART configuration 1 with flow control for TBT It's just wired that way. Signed-off-by: Keith Packard commit d9cc27641fe1778c098b065bf110be7823e6c9f4 Author: Keith Packard Date: Fri May 6 16:57:38 2011 -0700 altos: Add telebt-v0.1 to Makefile Doesn't get built without it. Signed-off-by: Keith Packard commit c360e5c04e30421e9ea2f7006b7d35aef35f1edd Author: Bdale Garbee Date: Fri May 6 17:57:17 2011 -0600 first cut at a telebt turn on script commit c1760cebd47d0f03808f3204c0fcb1183f754e50 Author: Keith Packard Date: Fri May 6 15:44:56 2011 -0700 altos: Add preliminary telebt v0.1 defines This should make the telebt v0.1 binary that works on the real hardware. Signed-off-by: Keith Packard commit 72a03baa73698fc1213a74320e6253c2380dd8fa Author: Keith Packard Date: Mon Apr 25 23:00:42 2011 -0700 altosui: Fix BT manage dialog so that the device lists resize This makes the device scrolling lists fill any extra space when the window is resized. Signed-off-by: Keith Packard commit e3bf13a38d24e95b16df1e2f01952d10f24cda10 Author: Keith Packard Date: Mon Apr 25 22:55:08 2011 -0700 altosui: Move AltosIgniteUI device open out of Swing thread Eliminate more blocking code from the Swing thread. Signed-off-by: Keith Packard commit 109344d54d3fa4f79342fd1ea2a3f4085475e30c Author: Keith Packard Date: Mon Apr 25 22:28:40 2011 -0700 altosui: Display reader name (usually the device) when an I/O error occurs Access the reader name directly from the reader object instead of a local variable (which wasn't getting set anyways). Signed-off-by: Keith Packard commit aa5caf6310f074109472e6f55d8bd9751fb75c4c Author: Keith Packard Date: Mon Apr 25 21:26:21 2011 -0700 altosui: Fix TeleBT name in flight monitor title Was getting the product number, not the product name. Signed-off-by: Keith Packard commit 2e7b7b80432bb251ac39efa1fa05d32b5f250e14 Author: Keith Packard Date: Mon Apr 25 21:17:07 2011 -0700 altosui: Separate out flash debug code to separate thread This avoids blocking the Swing thread while waiting for the serial device. Signed-off-by: Keith Packard commit 214cd69c0e4a1617ed5cde8fc2f46a4cee6ecced Author: Keith Packard Date: Sat Apr 23 22:50:58 2011 -0700 altos: add telebt-v0.0 Makefile Git doesn't like to add these. Signed-off-by: Keith Packard commit d41edb3384b6336f3482e61b0c9f9400a8b4f519 Author: Keith Packard Date: Tue Apr 19 15:29:39 2011 -0700 altosui: Make flight data download work through TeleBT This required flushing input before reading data blocks and adjusting some delays. Signed-off-by: Keith Packard commit 44fb71ca3e5bccd5f601fc5a2d5da7292050b1d6 Merge: 2ebdb88 c269e26 Author: Keith Packard Date: Tue Apr 19 14:06:39 2011 -0700 Merge branch 'telemini' into telebt commit 2ebdb888f6792de70b3132950a988d49752d264e Author: Keith Packard Date: Tue Apr 19 14:01:19 2011 -0700 altosui: Eliminate ao_cmd_filter hook Disabling status messages means we don't need to filter them out of the input stream. Signed-off-by: Keith Packard commit 7f5c9986dfa2d130b6c8c14308638cce49391a6e Author: Keith Packard Date: Tue Apr 19 13:42:30 2011 -0700 altos: remove BT logging code This was used to debug the serial line startup. Signed-off-by: Keith Packard commit 0195ff442c1da5d363dfda3f88f41865d0c6b469 Author: Keith Packard Date: Tue Apr 19 13:31:10 2011 -0700 altos: Remove bt debug command This will permit some additional cleanups. Signed-off-by: Keith Packard commit ce7cf0c5ddc5405f6f474f4e20752fc0b02f3ecb Author: Keith Packard Date: Tue Apr 19 13:27:40 2011 -0700 altos: Simplify BT communications Eliminate stdio I/O wrappers Signed-off-by: Keith Packard commit e3d501940718428135e04995dff7fef691c08a20 Author: Keith Packard Date: Tue Apr 19 13:20:19 2011 -0700 altos: Solidify BT connections Use delays while sending commands to BT module. Don't use BT for stdio until the module is initialized. Add \r to name setting command Don't require 'connected' signal for command input. Signed-off-by: Keith Packard commit 6b5957d5f6f8181da7be98c9bce49a0ec0b4a713 Author: Keith Packard Date: Tue Apr 19 10:41:28 2011 -0700 altosui: Wait two seconds after bluetooth connect XXX "something" isn't quite ready to communicate right after the device is connected, so we stick a delay in. There should be a better fix. Signed-off-by: Keith Packard commit 8de9d3cbfcd1db7b554fb761296a8de09aafc8c3 Author: Keith Packard Date: Tue Apr 19 10:25:47 2011 -0700 altos: Add delays to bt startup sequence The BT device takes a few seconds after power-up before it is ready to receive commands. Signed-off-by: Keith Packard commit 17f38e045fcd8ca0224095c0b2b7b098df77a8d8 Author: Keith Packard Date: Tue Apr 19 08:43:40 2011 -0700 altosui: Use persistent list of bluetooth devices for device dialogs Store a list of known bluetooth devices as preferences. Always include those in device dialogs with an option to go browse for more devices in both the device dialog and the Configure AltosUI dialog. Signed-off-by: Keith Packard commit f249e5926f5fd9f86c41e7f0a414193533d4d8b0 Author: Keith Packard Date: Mon Apr 18 18:16:38 2011 -0500 altosui: Make bluetooth dialog modal This allows it to be displayed correctly while the device dialog box (also modal) is up. Signed-off-by: Keith Packard commit 84163eee7847a09fe78f8762b28f857d76bf5755 Author: Keith Packard Date: Thu Apr 14 10:22:30 2011 -0700 altosui: Make AltosBTDevice implement AltosDevice interface This will allow the use of either USB or BT devices through the AltosDevice interface. Signed-off-by: Keith Packard commit 9cdef76c1275b343099d0d01af82d7eadd36a410 Author: Keith Packard Date: Thu Apr 14 10:12:29 2011 -0700 altosui: Create abstract AltosDevice class This will wrap either USB or BT devices. The USB device constants have been moved to Altos.java Signed-off-by: Keith Packard commit 5b3f18b38d80aa041b971204bf7a94278bd9584a Author: Keith Packard Date: Fri Apr 8 19:46:15 2011 -0700 altosui: Add primitive bluetooth device manager UI. This isn't useful, but does inquire for available bluetooth devices and show them in a list. Signed-off-by: Keith Packard commit c269e263a6accd815ed5d08c0f5a6c3d5b9d3853 Author: Keith Packard Date: Thu Apr 14 09:38:48 2011 -0700 altos: Write a few pre-launch samples for Tm/Tn devices Record pre-launch samples in a small ring and flush that to flash when launch is detected. This provides a complete record of the flight, rather than simply starting after launch detect. Signed-off-by: Keith Packard commit a0fb471ce10642fc4a4bd40e4a81f8d6fe7a7c21 Author: Keith Packard Date: Wed Apr 13 20:27:38 2011 -0700 altosui: oops - lost state changes when downloading eeprom data. This would cause the reader to just keep reading past the end of the flight. Signed-off-by: Keith Packard commit 7f49d694e776819e03b2c708e1c4ee23ba311430 Author: Keith Packard Date: Sat Apr 9 22:53:12 2011 -0700 altos/altosui: Log averaged baro sensor data in Tm/Tn Instead of logging the best height guess from the kalman filter, log barometer data. The logged data consists of the average value betwen log points to reduce noise. Signed-off-by: Keith Packard commit 8dd455204cf8712fa8c142b0c0517cec1bf5fd0f Author: Keith Packard Date: Fri Apr 8 10:13:55 2011 -0700 altosui: Add low-level Bluetooth APIs Adds the JNI functions to query and connect to arbitrary bluetooth devices. Adds Java wrappers to construct a list of proximate bluetooth devices. Signed-off-by: Keith Packard commit bf1c7df5301a1727e871a8447f835fe75bdce3fc Author: Keith Packard Date: Fri Apr 8 10:12:50 2011 -0700 altosui: Add TeleBT USB device support TeleBT can work just like a TeleDongle over USB. Signed-off-by: Keith Packard commit 1a54a58d72147888f783a3caf364479efff4ed9b Author: Keith Packard Date: Thu Apr 7 22:00:38 2011 -0700 altos: Use PIO(6) on BTM to monitor BT connection. Fix BTM init. PIo(6) appears to be an active-low indication of the Bluetooth connection status. Hook this up using an interrupt to track the link state instead of using in-band status messages. Signed-off-by: Keith Packard commit f28efe271f9670473249574f6bcf6e160fe58c7b Merge: 8db5c52 835ab3a Author: Keith Packard Date: Fri Apr 1 19:35:22 2011 -0700 Merge branch 'telemini' into telebt commit 835ab3a8c2741a09b27de58c37439a193c9919ce Author: Keith Packard Date: Fri Apr 1 19:35:00 2011 -0700 altosui: Add missing AltosTelemetryMap.java file Signed-off-by: Keith Packard commit 8db5c52f1c76a05020e4e0afbe4ea27485ad9f82 Author: Keith Packard Date: Fri Apr 1 17:26:08 2011 -0700 altos: Clean up BT serial communcations Disable echo on both ends in command mode to eliminate looping error values. Switch to 57600 baud to improve performance. Signed-off-by: Keith Packard commit a5d60fdb9c969c1516feb76a16001c9688112c4c Author: Keith Packard Date: Fri Apr 1 17:25:07 2011 -0700 altos: Make cmd echo per-connection instead of global Allow different connections to use different echo values, permitting the packet link to turn off echo while the USB link still has it on. Signed-off-by: Keith Packard commit 4e2c18249e16c98cf5f7dccdf8d3b84bc473863a Author: Keith Packard Date: Fri Apr 1 16:48:12 2011 -0700 altos: Clean up serial initialization Flush serial input buffers when switching speeds. Ensure pin configuration is correct. Signed-off-by: Keith Packard commit 92386f2e8419c4df125692cc998eb72ec49bf991 Author: Keith Packard Date: Fri Apr 1 14:12:56 2011 -0700 altos: Clean up usage of serial port for stdio Code wanting to use this must invoke ao_add_stdio; that way the link can be configured before command processing starts. Signed-off-by: Keith Packard commit 9f8a96a8516e13878b329dbf1da855ed9a3219c4 Author: Keith Packard Date: Fri Apr 1 14:11:44 2011 -0700 altos: Make ao_serial_drain public Allow external code to discard serial input Signed-off-by: Keith Packard commit 4f243a282f9aeb7433ccb2942850d380a091e603 Author: Keith Packard Date: Fri Apr 1 14:10:37 2011 -0700 altos: Remove serial monitor command This takes up space and isn't that useful these days Signed-off-by: Keith Packard commit 39bde78edc863d9d2ef50a59b8f28ab6274892b4 Author: Keith Packard Date: Fri Apr 1 14:08:37 2011 -0700 altos: Allow any stdio to be used with packet forwarding There's no reason to restrict packet forwarding to work only from USB. Signed-off-by: Keith Packard commit 01952da35a57ae4da062facb26b3c6d7de29190f Author: Keith Packard Date: Fri Apr 1 14:07:23 2011 -0700 altos: Provide for a pre-filter on commands This allows for external code to see each command line before it is processed and potentially skip it. Signed-off-by: Keith Packard commit 359ba0d9fc2c5947e6adc98bebcd061069c61e79 Author: Keith Packard Date: Fri Apr 1 14:04:58 2011 -0700 altos: expose set of available stdio values This lets external code manipulate which connection to communicate over. Signed-off-by: Keith Packard commit ce18eaa28b1385c962c09459cbc5f20e234d9ad5 Author: Keith Packard Date: Fri Apr 1 14:03:25 2011 -0700 altos: Add P2SEL_*_MASK defines to cc1111.h These are used to avoid having the code "know" which selections are 1 and which are 0 bits. Signed-off-by: Keith Packard commit 8e74cf6d1c70a7a17d01c20f6831571245392498 Author: Keith Packard Date: Thu Mar 31 20:58:14 2011 -0700 altos: Add initial TeleBT code Prototyping with a TeleMetrum v0.1 board and a serial link to a bluetooth module. Signed-off-by: Keith Packard commit c0971abc02b05d136aea257f3f40ba3b22b1d441 Author: Keith Packard Date: Thu Mar 31 20:55:18 2011 -0700 altos: Make ao_flight_test show true height but report saturated height To simulate a saturated baro sensor, clip baro data at a specified altitude. Continue to report the 'true' altitude in the output so that the resulting graphs are useful. Signed-off-by: Keith Packard commit 8a14142e7b37031a51409f121b913fe793bf3603 Author: Keith Packard Date: Thu Mar 31 20:53:12 2011 -0700 altos: Baro useful ceiling is MSL, not AGL Use MSL instead of AGL for detecting over-range baro sensor values. Always trust baro sensor during descent; it'll get there eventually. Signed-off-by: Keith Packard commit a9dae18a664f70b668159487015e61be7f776926 Author: Keith Packard Date: Thu Mar 31 20:51:15 2011 -0700 altos: Reflect ao_flight split in ao_flight_test dependencies Need to rebuild ao_flight_test when any of the flight sources change Signed-off-by: Keith Packard commit f558cfa1df77c36a459168c1953d0945ee5a7f9f Author: Keith Packard Date: Wed Mar 30 11:48:03 2011 -0700 altosui: Only plot acceleration when present in data file Eliminates a bogus axis and data line for devices which do not have an accelerometer. Signed-off-by: Keith Packard commit a9df9fc257eb2d7038d66ac7c2539aae4474bf12 Author: Keith Packard Date: Wed Mar 30 11:47:07 2011 -0700 altosui: Parse and export Max flight log value New configuration field might as well get dumped to the .csv files. Signed-off-by: Keith Packard commit 87bff181a95f6bf92c2cec350d331ba6af779e80 Author: Keith Packard Date: Tue Mar 29 18:11:47 2011 -0700 altos: Enable logging during nano flights Not having logging wasn't very useful. Signed-off-by: Keith Packard commit 011e37f27b3926a42c8c1a74e0f179bb48829ec7 Author: Keith Packard Date: Tue Mar 29 18:10:46 2011 -0700 altos: Run RDF beacon after apogee instead of waiting for landing This provides tracking when GPS fails, or on TeleMini. Signed-off-by: Keith Packard commit 08e6bbef2c3529dfd468ef221c526fc9f3ed5b81 Author: Keith Packard Date: Tue Mar 29 10:08:46 2011 -0700 altos: ao_sample_preflight was exiting preflight mode immediately Need to stay in pre-flight mode until we've gotten enough sensor data to calibrate things appropriately. The conversion from a unified ao_flight.c file was just broken here. Signed-off-by: Keith Packard commit 56d045040c49728a854741e99545766f3723da5e Author: Keith Packard Date: Tue Mar 29 09:39:27 2011 -0700 altosui: Don't display 0000-00-00 for missing flight log dates With Tm/Tn not having GPS to get the current date, it's no longer unusual to have no date for a flight log, so don't show the 0000-00-00 piece in that case. Signed-off-by: Keith Packard commit 8ade7d99f02df825e70d0a964b4648156101ef78 Author: Keith Packard Date: Tue Mar 29 09:38:23 2011 -0700 altosui: Display exception messages from swing thread Flight log management exceptions were getting displayed from the log serial I/O thread instead of the swing thread. That's a bad plan. Signed-off-by: Keith Packard commit 2f9be009ef26e3d7539f5932d267d7a8a7bcb7eb Author: Keith Packard Date: Tue Mar 29 09:37:11 2011 -0700 altosui: Make deployment testing handle Connecting... dialog Supporting the Connecting... dialog requires moving all serial communication to a separate thread. This was done by creating a worker thread and command queue to communicate between the UI and the serial line. Signed-off-by: Keith Packard commit 573edcd7dfe10ac3251396eae88eece55d82bcb6 Author: Keith Packard Date: Mon Mar 28 23:38:02 2011 -0700 altosui: Make flight log downloading handle 'Connecting...' dialog This required moving all of the serial communication to a separate thread and making the bulk of the download operation run after that has finished. Signed-off-by: Keith Packard commit c71a145daefb86d2c1297abec68e54bd951e3adf Author: Keith Packard Date: Mon Mar 28 23:35:05 2011 -0700 altosui: Clean up packet link connecting dialog Make sure the dialog is destroyed after use (otherwise, it hangs around on the screen sometimes). Switch timeout before showing dialog to 500ms -- that brings the dialog up less often when unnecessary. Use 'timeout_started' boolean to indicate whether the I/O thread has queued the dialog for display and whether it needs to queue a call to close it down. Signed-off-by: Keith Packard commit c6e7e812d67f91c63ba4982f7a899a72584027de Author: Keith Packard Date: Mon Mar 28 18:18:50 2011 -0700 altos: Create custom nano flight code No igniters, just 'pad/drogue/landed' modes (where 'drogue' == 'flying'). A constant 1Hz telemetry and RDF rate. Signed-off-by: Keith Packard commit c754759a2d503633d527da4ebb20eb859cd506fd Author: Keith Packard Date: Mon Mar 28 17:54:44 2011 -0700 altos: Split up flight code into separate flight/sample/kalman bits The flight code mashed together data processing, filtering and actual flight managament into one giant pile. Split things up so that we have: ao_sample.c: Sensor data processing. Reads the ring, handles calibration ao_kalman.c: Filter the data to track the accel/speed/height values ao_flight.c: Flight state management, specific to rocketry. The plan is to re-use ao_sample.c and ao_kalman.c for hardware not specifically designed for rocketry, like TeleNano. Signed-off-by: Keith Packard commit 006de838bbb096b9443863a46b8a125b1e6b5600 Author: Keith Packard Date: Sun Mar 27 00:48:07 2011 -0700 altosui: Handle serial calls from swing thread Calls from the swing thread cannot be canceled as there's no way to put up the cancel dialog. In this case, simply use the 5 second timeout and fail if no communication occurs within that amount of time. Signed-off-by: Keith Packard commit f23d0f3cbf1fb0c8eab497e266625f6410b69ba3 Author: Keith Packard Date: Sun Mar 27 00:46:19 2011 -0700 altosui: Tell serial device which frame to use for timeout dialogs For the timeout dialog to appear, a frame must be configured for it to appear near. This patch sends the frame from the eeprom download functions to the serial code. That path doesn't yet work as the eeprom download is still trying to talk to the serial device from the swing event thread, which prevents the cancel dialog from working. Signed-off-by: Keith Packard commit 067b21993e9a97fceadb355e571e5610535336a8 Author: Keith Packard Date: Sun Mar 27 00:13:38 2011 -0700 altosui: Allow radio channel to be configured over the radio link TeleMini/TeleNano can't be configured via USB, so we need to allow the radio channel to be set over the radio link. This change carefully sets the new radio channel, disables the remote link and then sets the teledongle channel to the new value and brings the link back up. Signed-off-by: Keith Packard commit 91a75279b6d306ba9d068a28c64917d5312122e8 Author: Keith Packard Date: Sun Mar 27 00:12:01 2011 -0700 altosui: Off-by-one error in telemetry format configuration UI The telemetry format menu uses 0 for full and 1 for tiny, but the telemetry configuration uses 1 for full and 2 for tiny. One direction (config to UI) was right, the other (UI to config) was wrong. Signed-off-by: Keith Packard commit 7ce8c9081e703d1405c2595ab9bda0cfa218c6c4 Author: Keith Packard Date: Sat Mar 26 23:38:54 2011 -0700 altos: full logging must flush pending data before checking state Flight state must be checked only after any pending data have been written to the log as the 'current' flight state is only valid when the pending data values have been processed. This ensures that the 'boost' state is not marked until the full ring of data is written. This ensures that the data processing code can find the barometer values from before boost to get an idea of the ground pressure value. Signed-off-by: Keith Packard commit 3945d8f986d8f4bd3186a2cbaed5186e49d59839 Author: Keith Packard Date: Sat Mar 26 23:15:36 2011 -0700 altos: Variable log rate in full logging code too With the fixed ADC rate used to get better data during flight, the logging code now needs to vary the data storage rate so that descent data is recorded at 10 samples/second while ascent data is recorded at 1 sample per second. Having the logging code do this itself eliminates any interaction with the flight code. Signed-off-by: Keith Packard commit 97517ee585462c2d355f23f999fb8d9ebd908ec1 Author: Keith Packard Date: Sat Mar 26 00:01:22 2011 -0700 altosui: Allow TM config connection to be canceled. This leaves the config UI connection attempt running and pops up a dialog box when it takes 'too long' in the remote case so that users with Tm or Tn devices can bring up the UI, and then boot the Tm/Tn without needing to time things carefully. Signed-off-by: Keith Packard commit 2c121f1ef495e8af3eb39210baa40e212b691894 Author: Keith Packard Date: Fri Mar 25 22:04:09 2011 -0700 altosui: swing hide/show methods are deprecated I don't know why, but they are, so just replace them with setVisible calls. Signed-off-by: Keith Packard commit b155647472ddfacb07c5ffa832e4d1f4a13ad342 Author: Keith Packard Date: Fri Mar 25 22:01:18 2011 -0700 altosui: Remove extra AltosEepromBlock layer This was interposed between the download layer and the eeprom layer to hold a eeprom block full of flight log records. The addition of the tiny log format required reworking the code to hold chunks full of eeprom data without regard to their content, so this content-specific layer didn't seem useful anymore. Signed-off-by: Keith Packard commit 011615d40b3cb1d1c0ab9fa41e139e263a6a51e7 Author: Keith Packard Date: Fri Mar 25 21:34:31 2011 -0700 altosui: Add support for downloading TeleMini/TeleNano flight logs Splits the eeprom downloading code into eeprom block downloading and separate eeprom data parsing so that the new data logging format can share the data downloading code. Signed-off-by: Keith Packard commit dea80af81b388cc3d7073444919f4e98b12fa730 Author: Keith Packard Date: Fri Mar 25 21:29:50 2011 -0700 altosui: Remove a bunch of debug printfs from the eeprom manager code Just noise on stdout. Signed-off-by: Keith Packard commit 7f5b5848ad6ef5c808638a29c3dc0101b56ed11e Author: Keith Packard Date: Thu Mar 24 08:08:43 2011 +0900 altosui: Add telemetry format menu and preferences Switches the TeleDongle between full and tiny telemetry packet formats, saving the last used format for each teledongle in the application preferences. Signed-off-by: Keith Packard commit f3e68341f6f5daaf26dd162e4f9a06c29988986a Author: Keith Packard Date: Thu Mar 24 05:27:57 2011 +0900 altosui: Add support for telemetry version 4 New telemetry format needed to support TeleNano and TeleMini Signed-off-by: Keith Packard commit 1e976a105423f2da1842f70da531c9051ba88a7f Author: Keith Packard Date: Wed Mar 23 10:42:31 2011 +0900 Add description to test flights commit 93040ef4d0bd90ec5ae052f22243cd56adfb300a Author: Keith Packard Date: Wed Mar 23 10:40:05 2011 +0900 Add ao_kalman.h to .gitignore commit 43a94380032300a2e33e1faa1efe93e858e0a2cf Author: Keith Packard Date: Wed Mar 23 10:37:39 2011 +0900 altos: Exit flight test at landing. Allow description in test flight list Signed-off-by: Keith Packard commit 32364c9e0d346e0e5d517e18d4e90b8ff2fa944f Author: Keith Packard Date: Wed Mar 23 10:33:38 2011 +0900 altos: Ignore alt error for fast->coast. Allow larger error for baro apogee. With the fixed kalman filter, transitions across mach don't cause bumps in the merged filter. And, with working kalman bits, the signal for broken baro detection is stronger and so we can allow for baro apogee detection in cases where noise occurs close to apogee. Bump the kalman filter to trust the baro less so that the model tracks across mach. Signed-off-by: Keith Packard commit 3d2042ccc2d29e4cb8ea39c5c69d07cb7e3daeea Author: Keith Packard Date: Tue Mar 22 16:55:08 2011 +0900 altos: Restore sensible kalman values Now that the kalman code seems to work correctly, restore the sensor errors and model errors to match reality Signed-off-by: Keith Packard commit 7d7b476564a16eda81ab3406f70a21995e1b464e Author: Keith Packard Date: Tue Mar 22 21:51:52 2011 +0900 altos: Fix up flight code testing This automates flight code testing by reporting mis-detected apogee or main events. Signed-off-by: Keith Packard commit a80d3836cfce3d4cfa7a71068539415c2dc421cd Author: Keith Packard Date: Tue Mar 22 21:50:29 2011 +0900 altos: Missing parens and some bad arithmetic in the kalman code Fixed point computations are a pain. Signed-off-by: Keith Packard commit f30de5766c1eefb18c7d024a2cf10ce02de41071 Author: Keith Packard Date: Tue Mar 22 21:29:05 2011 +0900 altos: Add ao_flight_debug code Trace the kalman filter to make sure it's working. Signed-off-by: Keith Packard commit f3053b1f3c85d4fd84b3c6cc87858f433166df34 Author: Keith Packard Date: Tue Mar 22 17:04:07 2011 +0900 altos: Clean up some debug stuff in ao_flight.c Remove some spurious printf debugging. Remove an attempt at discovering broken accelerometer code. Signed-off-by: Keith Packard commit 6864e06d88a5b908cffa7c4cd2be8969ff46ce4d Author: Keith Packard Date: Tue Mar 22 16:51:04 2011 +0900 altos/kalman: Kalman terms can be > 1, use 32-bit fixed point Because speed and acceleration are scaled by 16, it's fairly common for the kalman terms to end up larger than 1. Instead of trying to fuss with 16-bit values and shifts, just use 32-bit values. Signed-off-by: Keith Packard commit c14d6c5ace1d67bd948273ceb7eb6807b29c3806 Author: Keith Packard Date: Tue Mar 22 08:51:23 2011 +0900 altos: Compute a 'trust' value for the barometer Instead of making the baro use/don't-use decision binary, use a 'trust value' which slowly migrates from baro+accel to accel-only mode. This eliminates bumps in the data from a rapid shift. Signed-off-by: Keith Packard commit 7b009b2efe3af8722c358c304c2243652594e0d5 Author: Keith Packard Date: Tue Mar 22 05:42:51 2011 +0900 altos: Switch telemetrum over to kalman filter This changes the full telemetry stream to include kalman data instead of the old ad-hoc flight data. It's compatible in that the packet sizes are the same so teledongle can receive either and figure out which it has received. A few plotting and testing tools are added to make validating the new code easier. Signed-off-by: Keith Packard commit 20427ae4965f756aac0cedc5179a1c45b9a781f2 Author: Keith Packard Date: Mon Mar 21 19:59:27 2011 +0900 altos: Add nickle kalman implementation. This generates the constants needed to implement Kalman filtering in the flight firmware. Signed-off-by: Keith Packard commit ca3f03ef5c09446bebf0f5734f36a0248c457b1d Author: Keith Packard Date: Sat Mar 19 23:55:39 2011 -0700 altos: Add .sdcdbrc file for teledongle My sdcdb script uses this to set command line options automatically Signed-off-by: Keith Packard commit be838db49d999426a9dd02c0166fe161722f1e61 Author: Keith Packard Date: Sat Mar 19 23:53:08 2011 -0700 altos: New telemetry report format (version 4). Supports tiny telemetry. This completely replaces the version 3 format with a much simpler and easier to parse scheme. It's described in detail in ao_telem.h, but the basic idea is that the whole line is split into name/value pairs, separated by whitespace. Every name is unique, and the values are either strings or integers. No extraneous formatting or units are provided. Signed-off-by: Keith Packard commit ad6bb342d237988404fa32540b38c61d6ddc1f0d Author: Keith Packard Date: Sat Mar 19 23:51:02 2011 -0700 altos: The kalman code requires a constant sample rate The kalman function can't handle a variable sample rate, so keep the ADC running at full speed for the whole flight instead of slowing it down after apogee. Signed-off-by: Keith Packard commit 31feb7777f73fed61193d3404f457ea1a081fe9c Author: Keith Packard Date: Sat Mar 19 23:49:41 2011 -0700 altos: Split telenano main from telemini Eventually, telenano will run different code; prepare for this by creating a telenano-specific main routine. Signed-off-by: Keith Packard commit 8950df02382f5f0aea5bac078fdf7134b98c43ed Author: Keith Packard Date: Sat Mar 19 23:46:18 2011 -0700 altos: Split out tiny telemetry from full telemetry The TeleMini and TeleNano boards do not have either GPS or accelermeters, and they also run the kalman filter which produces standard unit measurements for the flight height/speed/accel values. This makes the telemetry significantly different. ao_telemetry_tiny.c sends the required data. Note that TeleNano sends the same telemetry as telemini at this point; there are a couple of values which are not useful, but the overhead of sending them is small enough that the hassle of having three telemetry formats seemed excessive. Signed-off-by: Keith Packard commit 5ba75e95c98d3e441a58d6f75d328d579e1997fe Author: Keith Packard Date: Sat Mar 19 23:41:44 2011 -0700 altos: Make telemetry interval more consistent Instead of using a delay between telemetry packets, use a telemetry period and compute an appropriate delay each time. This requires changing the ascent telemetry from a 50ms delay to a 100ms interval, to provide a regular 10 packets-per-second rate. Before, we counted on the telemetry packet taking about 50ms to send so that we would receive about 10 per second. This also eliminates delays during descent for RDF tones -- those will get transmitted in the interval between telemetry packets without interrupting the spacing of those packets. Signed-off-by: Keith Packard commit 3f0bc801fd08a613c681504f0d1f9374486a2487 Author: Keith Packard Date: Sat Mar 19 23:31:20 2011 -0700 altos: Configure packet size from send/recv parameters. Instead of setting the packet size at configuration time, use the provided packet size to the send/recv functions to configure the radio. This eliminates many configuration calls, leaving us with 'RDF' mode and 'packet' mode, the latter working for telemetry and the bi-directional link. Signed-off-by: Keith Packard commit 5c28b9312d90a3a66016abc641c20bcd852d69f8 Author: Keith Packard Date: Sat Mar 19 23:27:15 2011 -0700 altos: Don't init packet slave on TD. Make slave start optional Oops. TeleDongle was starting the packet slave code, which kinda wrecked its ability to receive telemetry packets. This patch simply removes the packet slave code from teledongle as it cannot be used (yet), it also makes the packet slave code initialization take a parameter which controls whether to start that by default; in the future, perhaps TeleDongle will gain a command to start packet slave mode. Signed-off-by: Keith Packard commit e980b251e5a4d25410710a9aa89ef940e06b0d93 Author: Keith Packard Date: Sat Mar 19 18:43:52 2011 -0700 altosui: Add software version to Configure AltosUI dialog Show this somewhere so we can figure out what is installed. Signed-off-by: Keith Packard commit 1aeb759c48f475ffaaae787515e080440c8386c3 Author: Keith Packard Date: Sat Mar 19 12:28:08 2011 -0700 altos: Baro-only boards must not detect launch on accel or speed data The baro sensor generates too much noise to use small changes in computed speed or acceleration to cause a false launch detect. Signed-off-by: Keith Packard commit 7a4f6d5ad55637cde97a1e2f247f92df59bc2e14 Author: Keith Packard Date: Fri Mar 18 21:01:15 2011 -0700 altos: Write height values to log for nano/mini This is a lot more useful than the old filtered pressure data. Signed-off-by: Keith Packard commit c985bb6a19c710409629f3c095332ba7afcf5248 Author: Keith Packard Date: Fri Mar 18 20:36:59 2011 -0700 altos/test: Add scripts to run lots of flights through the code This runs a long list of flights (there's a user-specific path pointing at the flights) and squawks if the baro and dual flight computers don't match. Signed-off-by: Keith Packard commit dbe915795c66995805b5f37e6eb698cf2c143e61 Author: Keith Packard Date: Fri Mar 18 20:26:12 2011 -0700 altos: Fix mini/nano default log size to available flash space Also, remove accel cal code from boards without accel Signed-off-by: Keith Packard commit 5db94e1e230bade966a997aa83165405a9ec9d83 Merge: 1a8f45e cbb968f Author: Bdale Garbee Date: Fri Mar 18 21:12:39 2011 -0600 Merge branch 'telemini' of ssh://git.gag.com/scm/git/fw/altos into telemini commit 1a8f45e7b720d01d3ff0c35ed1caaf8cbe0c3119 Author: Bdale Garbee Date: Fri Mar 18 21:12:12 2011 -0600 fix up script to work and have reasonable texts commit cbb968f5cf03625d453d84dc535758072a2c04c7 Author: Keith Packard Date: Fri Mar 18 20:07:25 2011 -0700 altos: Add TeleNano support This just uses the TeleMini bits, which should work fine for now. Signed-off-by: Keith Packard commit 32c51840c792a737019fbc9fe42f2ca073b71827 Author: Keith Packard Date: Fri Mar 18 19:49:46 2011 -0700 altos: Tiny logging fixes. Scan at start, stop when land or full. Initialize the flight log for tiny systems by scanning the log area to find the current flight number and log area bounds. Stop logging data when the flight is over, or when the log area is full. Signed-off-by: Keith Packard commit 62eae8a17d870e8ac6937ba23da01a5fbc652c6c Author: Keith Packard Date: Fri Mar 18 16:53:11 2011 -0700 altos: Add kalman filters for baro-only boards This adds a baro-only kalman filter to track the state of the rocket, and then uses it to control flight events instead of the existing ad-hoc mechanisms. Signed-off-by: Keith Packard commit c826fab31f8aea25a942b6bb8435d4b04c1bef10 Author: Keith Packard Date: Thu Mar 17 16:00:10 2011 -0700 altos: Add tiny logging for TeleMini/TeleNano This splits the logging code into management of the log space within storage and separate code to actually write suitable log entries. A new log writing module, ao_log_tiny, is added which writes only altimeter data at a fairly low data rate for devices using on-chip storage. Signed-off-by: Keith Packard commit 8b546b474b7b6c5b4169b4c1ca09c6f17ebb3ae5 Author: Anthony Towns Date: Fri Mar 11 21:41:01 2011 +1000 ignore new flight test file commit 82707a05af0eb2d54f46b58805c95cdf4e5a3703 Author: Keith Packard Date: Wed Mar 16 20:36:50 2011 -0700 altos: Internal flash ops block when running from flash The docs say that if you are executing from flash, then the CPU will stall after a flash write or erase command is started until the operation is complete. Take advantage of that to simplify the flash code. Signed-off-by: Keith Packard commit 1d8579f973bfe1047ee91f03555e74abdc483e69 Author: Keith Packard Date: Mon Mar 7 16:31:43 2011 -0800 altos: oops -- altitude reporting wasn't pausing between signals need to actually alternate the LED/tone with some space so you can count. Signed-off-by: Keith Packard commit d007bccf6cb36d24a9c7c48de7d80759ac6f2e37 Author: Keith Packard Date: Mon Mar 7 15:57:58 2011 -0800 ao-load: Make usb descriptor rewriting optional TeleMini and TeleNano don't have USB descriptors to rewrite when loading firmware, so allow them to be missing. Signed-off-by: Keith Packard commit 57d83f51377fb58018f422e42d74f29b86a821d2 Author: Keith Packard Date: Mon Mar 7 15:26:41 2011 -0800 bringup: Add script for telemini Copied from teledongle with a few obvious changes. Signed-off-by: Keith Packard commit ddd7485f05d0cad8f5b3e1ee9b9a4d2812ea1837 Author: Keith Packard Date: Mon Mar 7 08:03:11 2011 -0800 altos: Switch pins around for TeleMini TeleMini has fewer sensors and uses P0 for igniters instead of P2. Signed-off-by: Keith Packard commit f8afc2641c779fc312a42a6358187d8716ebe61a Author: Keith Packard Date: Sun Mar 6 23:52:11 2011 -0800 altos: Switch LED usage for TeleMini around We're using the LEDs instead of tones, so make red mean 'low tone', green mean 'middle tone' and both mean 'high tone'. Signed-off-by: Keith Packard commit fc5d014721a7e5a7b22f07eb4ab0bb3c764473fe Author: Anthony Towns Date: Sat Feb 26 16:06:48 2011 +1000 ao_intflash: Avoid overwriting code Require firmware to specify the end of its codespace in its Makefile, and use this to determine where the start of available flash is. Should give compile time errors if either there's no room left for storage, or if there's not enough room for code. commit 0e4c55d78852415e79f7318471f4d00c89703b78 Author: Keith Packard Date: Sun Mar 6 21:03:57 2011 -0800 altos: Add TeleMini v1.0 This adds initial code for the telemini board, a two channel flight computer with digital telemetry and a barometric sensor. Signed-off-by: Keith Packard commit 2d41358c80f2eb8b6e98d699149bb941a6671475 Author: Keith Packard Date: Sun Mar 6 21:00:52 2011 -0800 altos: Start with packet slave running. Turn off in pad mode. Instead of turning slave mode on in idle mode, start with it running and disable it in pad mode instead. This means packet mode is available in startup mode too. Signed-off-by: Keith Packard commit 1e56ed44e562f808addfd76bfb352f981db94094 Author: Keith Packard Date: Sun Mar 6 21:59:08 2011 -0800 altos/test: Add baro-only flight test program This builds the flight code in baro-only mode for testing. Signed-off-by: Keith Packard commit e339ffd8bd8b9e3f4758017ba355028000cb612e Author: Keith Packard Date: Sun Mar 6 21:57:52 2011 -0800 altos/test: Use ao_convert.c instead of hand-coded pres → alt func Fix up ao_convert.c so that it can be used within the flight test code instead of having a (broken) copy of the code there. Signed-off-by: Keith Packard commit 02611efea0c485d78fad08c696c1f56e868d36b8 Author: Keith Packard Date: Sun Mar 6 20:56:25 2011 -0800 altos: Make serial, usb, beeper and accelerometer optional components Not all boards will have these, so fix places that use them to deal with that. Signed-off-by: Keith Packard commit fdd15a254c6fab5ba2d02320ba0ceb3e6a56354c Author: Anthony Towns Date: Sat Feb 26 11:48:30 2011 +1000 ao_intflash: Use internal flash for storage Makes any free pages at end of CC1111's internal flash available via the ao_storage API. commit 8f1bd11b61d9423c62162f7bbe573fc69fd75269 Author: Keith Packard Date: Wed Mar 16 14:10:06 2011 -0700 aoview: remove -s option. commit 45395c7825184efb835d5b165fa132be20c7f6fe Author: Keith Packard Date: Wed Mar 16 14:08:42 2011 -0700 Bump published version number to 0.9.1 commit 9f3d26cadf37880d2c9223f59271d295b11c4c2a Author: Keith Packard Date: Wed Mar 16 14:05:13 2011 -0700 altosui: Missed jcommon.jar in the Mac OS install image This caused graphing to fail on Mac OS X Signed-off-by: Keith Packard commit 6e340c87d3198647cf075ed520a82703b0d59beb Author: Keith Packard Date: Mon Mar 7 00:26:17 2011 -0800 altos: Oops. Lost a couple of commands when merging the doc patch I didn't merge this carefully enough and managed to lose the 'f' and 'e' commands, which are kinda useful. Signed-off-by: Keith Packard commit 8cdf4fb051c22b35c251d90bc288551f7c2898bf Author: Anthony Towns Date: Sun Feb 27 11:11:12 2011 +1000 src/ao_cmd: Shave off bytes from doc strings Switch to using { func, "X args\0Desc" } to specify command, saving a char field by looking at help[0] instead, and reduce help length by doing alignment with printf instead of hardcoded spaces. commit 2cfe205de4242398e69c9e7c613af0d2a7094686 Author: Keith Packard Date: Mon Mar 7 00:01:01 2011 -0800 Revert "src/ao_gps_skytraq.c: Update logging rate to 10Hz" This reverts commit b080e933a65d268aaaec8cfd5f617a13d5babc43. 10Hz data isn't any better than 1Hz data; it still doesn't like going upwards rapidly. commit 249cd3b63d97581b068fff988e0cd7fcd5bf493e Author: Keith Packard Date: Sat Feb 19 01:06:01 2011 -0800 altosui: Display eeprom parsing errors to user When reading the eeprom, any parsing errors (most likely bad checksums) indicate some kind of problem with either the hardware or the flight software. Display these to the user and do not erase the flight. Signed-off-by: Keith Packard commit 629a7637871b24fe6d1204aaa7185d84933d4639 Author: Keith Packard Date: Sat Feb 19 01:04:19 2011 -0800 altosui: Always read whole eeprom block, even at end of flight Instead of stopping early, continue reading the whole eeprom block so that the extra serial data doesn't end up confusing the next user of the serial line, which may well be reading the next flight. Signed-off-by: Keith Packard commit 7ca2cf1b7e03b8453b45b45e313a33ad65da9ad5 Author: Keith Packard Date: Sat Feb 19 01:02:00 2011 -0800 altosui: Mark empty eeprom records 'invalid', don't generate exception When reading empty eeprom records, mark them as 'invalid', but don't generate an exception as it's normal to read these at the end of the flight log. Signed-off-by: Keith Packard commit 690feb166fd2bc6b6dfc26828f1efe9f5f1c6c0d Author: Bdale Garbee Date: Fri Feb 18 23:56:01 2011 -0700 update changelogs for Debian build commit 0630e7d6d8cf6abf0fe07f9a6df40ee472cce1ef Author: Bdale Garbee Date: Fri Feb 18 19:54:18 2011 -0700 tie bringup scripts to Bdale's bench TeleDongle commit b080e933a65d268aaaec8cfd5f617a13d5babc43 Author: Anthony Towns Date: Sat Feb 19 05:49:15 2011 +1000 src/ao_gps_skytraq.c: Update logging rate to 10Hz Send commands to skytraq to update baud rate to 57,600 bps, and set NMEA output rate to 10Hz. commit aad7103dcf44e69a5a30e008836cce5542ea33e2 Author: Anthony Towns Date: Sat Feb 19 04:17:17 2011 +1000 src/ao_gps_skytraq: simplify parsing code Added macros to make correctly constructing skytraq commands easier. Simplified code path for NMEA processing marginally. commit fe5123fa801f5dafed8b052da607899d1ef20500 Author: Anthony Towns Date: Wed Feb 2 19:12:57 2011 +1000 ao_radio: generalise setup of packet size commit 8b09cc1825645a57c256f38a2f9586ddecf6bda5 Author: Keith Packard Date: Fri Feb 18 10:02:46 2011 -0800 altos/test: auto-configure acceleration parameters from the log file The flight test code had static accelerometer configuration values, making it impossible to use data from different boards without recompiling. As the eeprom and telem log files both contain the necessary data, parse that instead. Signed-off-by: Keith Packard commit d3bc27fabb6159ce58b14d0f7929b0f46f67c378 Author: Keith Packard Date: Fri Feb 18 09:54:01 2011 -0800 altos/test: Add dependencies in the Makefile for ao_flight_test Yes, it would be nice to automate dependency generation here, but I can't be bothered. Signed-off-by: Keith Packard commit c3080fdafff5212f267ba7c765a2f083435be799 Author: Keith Packard Date: Fri Feb 18 09:51:37 2011 -0800 ao-load: fix usage message to note that '=' is required for options The usage message was suggesting incorrect command line syntax; long options use '=' between the option name and value, not whitespace. Signed-off-by: Keith Packard commit a09501ab714c0638410d06f80903a8769d93c688 Author: Bdale Garbee Date: Wed Jan 19 12:47:25 2011 -0700 update changelogs for Debian build commit 2bb83d90aa03d825ca1b751418c91b194b72f1f9 Author: Bdale Garbee Date: Wed Jan 19 12:46:02 2011 -0700 elide changelog entries or re-release of 0.9 commit 9541ccd9ff9e67e0862ca31706358d8308fc85d8 Author: Bdale Garbee Date: Wed Jan 19 12:42:40 2011 -0700 update turnon script to prefer TeleDongle as programmer commit 159fda30fe57349660c5e2d95017144ea3f5d7db Author: Bdale Garbee Date: Wed Jan 19 12:26:53 2011 -0700 update changelogs for Debian build commit 97f4f2e0d28eec1cf19d2d25140e42f6ac277700 Author: Keith Packard Date: Wed Jan 19 11:21:52 2011 -0800 altos: Program default flight log max value for new boards New boards have no config space values at all, and so they need each value to be set. Yes, this should be fixed so that there aren't two copies of these assignments. Signed-off-by: Keith Packard commit 480587cf514ba21885b24c3b8fcb98d6b76ea8f4 Author: Bdale Garbee Date: Wed Jan 19 00:05:25 2011 -0700 update changelogs for Debian build commit 6244f2316267738781e31a773b377bcf8c476918 Author: Bdale Garbee Date: Wed Jan 19 00:04:45 2011 -0700 prepare to release commit 3c72103866f041107af49e01a5ccb6d4e6b6ac80 Author: Bdale Garbee Date: Tue Jan 18 23:55:42 2011 -0700 update changelogs for Debian build commit 4ae724fe1d2ca0d712321c4fdc2200ff46d77428 Author: Bdale Garbee Date: Tue Jan 18 23:54:36 2011 -0700 we need an install target to prevent parent dir make from failing commit ca7b549fbf62019b01a6e6c85da50645ea9a4502 Author: Bdale Garbee Date: Tue Jan 18 23:48:08 2011 -0700 update changelogs for Debian build commit 9a5666f42d4d90a0a488fd0a85ae9914944fe0be Author: Keith Packard Date: Tue Jan 18 22:46:25 2011 -0800 doc: Build with 'make all' from top level. Build with 'make fat' This will make sure the docs are up-to-date for both regular and fat builds. Signed-off-by: Keith Packard commit 72a04d679d06aaad9c2b4297fefd585fc393ce2e Author: Keith Packard Date: Tue Jan 18 22:39:07 2011 -0800 fat: Add docs to Linux package Oops. Missed this one. Signed-off-by: Keith Packard commit 5d91c250179f44ca17c26fff36718b7026aa8ee0 Author: Keith Packard Date: Tue Jan 18 22:34:15 2011 -0800 fat: Add firmware for v1.1 and docs to mac/windows/linux installers We'll need to be sure to update this each time we add a product. Signed-off-by: Keith Packard commit 26c4cc3054b1c7c9ed6ce3c2f21f6254b3245718 Author: Bdale Garbee Date: Tue Jan 18 23:29:03 2011 -0700 freshen copyright year commit e2e20f6ce8a9c2bca36fde5730ccd7151377ec6f Author: Bdale Garbee Date: Tue Jan 18 23:18:42 2011 -0700 add 0.9 revision entry, with caveat about telemetry format change commit 27e6dbbe95ae9b361d60576e0cbadb66792307f3 Author: Keith Packard Date: Tue Jan 18 20:39:58 2011 -0800 doc: Add v0.9 features from altosui to documentation. New flight download UI and new config items. Signed-off-by: Keith Packard commit 92d7841edcfc8a841f71f7f97cc541f8e55c4627 Author: Keith Packard Date: Tue Jan 18 20:39:30 2011 -0800 doc: Don't delete telemetrum-outline.pdf This has a drilling template for the board. Signed-off-by: Keith Packard commit c411dce69be58238b8312c2fd7405cbe8b5d4a5a Author: Bdale Garbee Date: Tue Jan 18 17:27:11 2011 -0700 update changelogs for Debian build commit da42f406e88ccc821cd45d5a94d5afec65ec50e9 Merge: ea4cdfb cf550f9 Author: Bdale Garbee Date: Mon Jan 17 09:50:17 2011 -0700 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit ea4cdfb87e03ecfb974f98305671265b6fb95372 Author: Bdale Garbee Date: Mon Jan 17 09:49:45 2011 -0700 update documentation to reflect reality that modifying a board or separate pyro battery is not as simple as one trace cut on v1.0 and v1.1 boards commit cf550f9b96fa94d8db559e01df0e265bb1c7b572 Author: Keith Packard Date: Sun Jan 16 23:23:45 2011 -0800 doc: Remove mention of ao_wake_task This has been removed from the altos sources, so remove it from the docs too. Signed-off-by: Keith Packard commit 4b71c4f4ed6cae23a7f4a2e7ae697da9ec614898 Author: Keith Packard Date: Sat Jan 15 12:26:53 2011 -0800 altos: Use 5V reference data to correct accelerometer measurements. When the 3.3V and 5V values shift relative to each other (usually due to changes in power consumption), the measured acceleration will appear to shift. This patch converts the 3.3V referenced acceleration value into a 5V referenced acceleration, eliminating this error. Signed-off-by: Keith Packard commit 2887fe7affc0706dbeb2f04df9a00a9b799903ed Author: Keith Packard Date: Sat Jan 15 12:25:57 2011 -0800 altos: Optimize fetching of ADC data in flight code This stores the address of the desired sample in a local variable and then fetches through that. Saves quite a few instructions. Signed-off-by: Keith Packard commit 2681a17500913cbaf3966f09380bb1d6b59e3863 Author: Keith Packard Date: Sat Jan 15 12:18:32 2011 -0800 altos: Sample the accelerometer reference voltage on v1.1 boards This places the 5v reference samples in an array parallel to the basic ADC values. It doesn't do anything with the values, just stores them. Signed-off-by: Keith Packard commit 69290588980bb15732a99eca5c911a3b6e9a37b9 Author: Keith Packard Date: Sat Jan 15 12:12:02 2011 -0800 altos: Ensure flight code gets first crack at new ADC data Instead of having everyone wait on the raw ADC ring, have the flight code wait on that and have everyone else wait for the flight code to finish looking at the data and move its pointer forwards. Signed-off-by: Keith Packard commit 1b8d7313504240ed04e0747e9b0f6e9a83d323e2 Author: Keith Packard Date: Sun Jan 16 15:57:15 2011 -0800 altos: Auto-calibrate linux-based flight testing code Use the provided ground acceleration average to set the two accelerometer calibration values so that the flight code will detect pad/idle mode correctly. Signed-off-by: Keith Packard commit afd3d3cdb8c2291c1c7cda7908392d68cd04f87f Author: Mike Beattie Date: Mon Jan 17 15:03:40 2011 +1300 Rework invalid accel cal detection code Slightly reduces code space. Uncalibrated accelerometer now enters invalid state as well. Signed-off-by: Mike Beattie commit 3566dee1cf83870396a0bb164f5549dd3faf58f5 Author: Keith Packard Date: Sun Jan 16 14:40:31 2011 -0800 altosui: Remove spurious colons from eeprom selection headers This colons make the presentation a bit confusing. Signed-off-by: Keith Packard commit ab31b1c737d8fd32af482e5b06699f1b832a25a1 Author: Keith Packard Date: Sat Jan 15 00:56:22 2011 -0800 altos: Add DATA_TO_XDATA to linux test harness The flight test harness needs to expose every function used by the flight code in some form, and this macro is about to become used. Signed-off-by: Keith Packard commit add2802a8a33336180fe6856241a7f4a8200e89c Author: Mike Beattie Date: Sun Jan 16 00:10:30 2011 +1300 altos: Added check for out of bounds accel Chose invalid flight mode instead of idle to give user feedback. Signed-off-by: Mike Beattie commit 58838c0b96a91da0bd0cd77c3ff312b589c08136 Author: Mike Beattie Date: Sat Jan 15 23:21:26 2011 +1300 altos: Added check for an accel value above 1.5g When detecting flight or idle mode, this should indicate that accel cal values are out of whack. Signed-off-by: Mike Beattie commit 118fe84c9ff1cc9d1653e67a2315e22e19d60a14 Author: Keith Packard Date: Sat Jan 15 11:26:31 2011 -0800 altos: average 512 accel/baro samples at startup instead of 1000 This lets us use a simple shift instead of a divide, saving a huge amount of code space. Signed-off-by: Keith Packard commit 8a775b8f9ecefa143050653d74dfd218b32b9bb5 Author: Anthony Towns Date: Sun Jan 16 10:54:45 2011 +1000 altos: Restructure skytraq NMEA parsing code to save some space Splitting this into several smaller functions appears to make SDCC generate better code. commit 7a35b2d7048669a96256d4ea0086299f8a0cb1df Author: Keith Packard Date: Sat Jan 15 22:42:38 2011 -0800 altos: Flush log when full When the log storage is full, make sure any pending writes are flushed out so that the last bit isn't lost. Signed-off-by: Keith Packard commit 47ee4597e55749e8f66f61a585ea32776979bf80 Author: Keith Packard Date: Sat Jan 15 16:25:10 2011 -0800 altos: TELEMETRY PROTOCOL CHANGE. Switch to 16-bit serial numbers. What a terrible mistake! The flight computer serial numbers were recorded in only 8 bits, so serial numbers > 255 would get truncated. There's really no fix other than bumping the field to 16 bits and reflashing every TM and TD on the planet. Very unfortunate. Signed-off-by: Keith Packard commit b22ba359a02297e39a446cbd5ef51e63b795624a Author: Keith Packard Date: Sat Jan 15 12:05:50 2011 -0800 doc: inkscape tracks the filename inside the document telemetrum-outline.svg was renamed from telemetrum.svg and inkscape appears to care. Signed-off-by: Keith Packard commit d0a841b285fb398f0be72183ec3c9d1e358419a9 Author: Keith Packard Date: Sat Jan 15 12:02:43 2011 -0800 altosui: Require 4 sats to light up the 'GPS locked' light. This tracks the same GPS signal requirement needed for 'GPS ready' and ensures that we have a 3d fix. Signed-off-by: Keith Packard commit 1bfdce6fc3367fdf03e0dc7ddd94da18723b8ba3 Author: Keith Packard Date: Sun Jan 16 14:30:38 2011 -0800 altosui: Ensure serial device is closed after eeprom download finishes As this code is all event-driven, track which events will trigger further work and block closing the device in those specific cases, ensuring that all other code paths end up closing the device. Signed-off-by: Keith Packard commit 987039b8f0b1d889aca9109d4c6a83f034ff64a7 Author: Keith Packard Date: Sun Jan 16 14:29:57 2011 -0800 altosui: Remove debug message when eeprom downloads are complete. This message isn't useful now that this code appears to work. Signed-off-by: Keith Packard commit fb534aae15f0f1e5d69790e159d0287b6b8a514a Author: Keith Packard Date: Sun Jan 16 14:28:35 2011 -0800 altosui: Use long input flush timeout when remote. 100ms isn't long enough to capture pending remote serial input, so use 300 ms in that mode. Signed-off-by: Keith Packard commit d4add23186b3586c99579d83efdc003f79e9bf7a Author: Keith Packard Date: Sun Jan 16 14:26:18 2011 -0800 altosui: Make serial debug more complete and accurate Display all serial input, including telemetry. Wait to display serial output until flush time, to debug missing flushing. Show when devices are opened and closed. Signed-off-by: Keith Packard commit deb3c7b9206be0c9c46f75d35c8f766c26d9838f Author: Keith Packard Date: Sat Jan 15 22:43:37 2011 -0800 altosui: Reset eeprom download instance variables before reading flight To deal with downloading multiple flights in a single invocation, make sure all relevant instance variables are set back to start of flight download values each time a log is read. Signed-off-by: Keith Packard commit eec9eb2e81535e62c52fbb2e57a2d33f88f92c1a Author: Mike Beattie Date: Mon Jan 17 07:56:53 2011 +1300 Close serial port if Download/Delete dialog is cancelled. Signed-off-by: Mike Beattie commit df1c6ab3ac079199b5a12328c9ff5cfa6ac29b36 Author: Mike Beattie Date: Mon Jan 17 00:40:07 2011 +1300 Convert EepromSelect dialog to use a GridBag Signed-off-by: Mike Beattie commit fef302656f21ae0ab4772f72979cbb7f071da89a Author: Mike Beattie Date: Sun Jan 16 20:25:19 2011 +1300 Re-order and re-arrange eeprom download dialog Signed-off-by: Mike Beattie commit 35adb7c98fe02e84fff70c1bee22bfa019cfacc2 Author: Keith Packard Date: Fri Jan 14 21:44:59 2011 -0800 doc: Add telemetrum mounting template in svg and pdf forms telemetrum-outline.svg and telemetrum-outline.pdf Signed-off-by: Keith Packard commit fdba0f24afd59becc499d750bbdb80aea86066ac Author: Bdale Garbee Date: Fri Jan 14 18:01:16 2011 -0700 update changelogs for Debian build commit 646e1926cdf56e2cf2425413ce716e6999b64a58 Author: Bdale Garbee Date: Fri Jan 14 18:01:00 2011 -0700 update changelogs for Debian build commit d908c2ebd0b11a54cfd922a192249d0f0df0ddb0 Author: Keith Packard Date: Fri Jan 14 16:47:36 2011 -0800 altosui: Add preference for serial debugging. This dumps serial input/output to stdout. Signed-off-by: Keith Packard commit fcaee12a64d5e195b55b8f77c19dfc0c57ef5d58 Author: Keith Packard Date: Fri Jan 14 16:47:19 2011 -0800 altosui: Ensure serial line is flushed after disabling remote link Flush the '~' character. Signed-off-by: Keith Packard commit 2d154be89246e111a36f7c2700effbb2c97da541 Author: Keith Packard Date: Fri Jan 14 16:44:50 2011 -0800 altosui: Show dialog after successful delete or when no flights Make sure the user always sees confirmation for flight log management. Signed-off-by: Keith Packard commit b490455807d1c70c81785ed8931a07ab44e8e421 Author: Bdale Garbee Date: Fri Jan 14 14:31:19 2011 -0700 update changelogs for Debian build commit 97b1ca994599ad262400eb3c685799582f7f1b94 Author: Bdale Garbee Date: Fri Jan 14 14:30:49 2011 -0700 update changelogs for Debian build commit d794ef9e0fbe4d13259db1bbd69f01717c14400b Author: Keith Packard Date: Wed Jan 12 12:41:26 2011 -0800 altos: check for valid flight number in ao_log_delete Zero is not a valid flight number, and ao_log_flight uses that to indicate 'no flight in this slot'. Check the user-provided input for zero before looking through the slots. Signed-off-by: Keith Packard commit 8801b8c1947bd39f7c985b91a2ba8dbc81bcc91a Author: Keith Packard Date: Wed Jan 12 12:40:45 2011 -0800 altosui: Add eeprom 'manage' ui to download and delete multiple flights This shows the list of available flights and provides options to download and/or delete each one. Signed-off-by: Keith Packard commit 440d52e34364fdeeddc76a2d744cc6d1c934364f Author: Keith Packard Date: Tue Jan 11 21:28:07 2011 -0800 altosui: Add support for parsing list of flights from the 'l' command This adds parsing support to enumerate the available flights, but does not yet provide any UI to use it. Signed-off-by: Keith Packard commit 7ad419d81c90ef6a16656970466313767fef830f Author: Keith Packard Date: Tue Jan 11 21:26:41 2011 -0800 altos: oops -- 'e' command was only showing 7 of the 8 bytes per line Just a silly off-by-one error when printing out the data received from flash. Signed-off-by: Keith Packard commit bd2480fd757b67557d9c7de42e402034002c3e37 Author: Keith Packard Date: Tue Jan 11 15:39:24 2011 -0800 altosui: Split eeprom download code apart Create separate 'download config data', 'read single record' and 'read block' functions. This code will be shared with future multi-log reading code for new firmware. Signed-off-by: Keith Packard commit c437b14b7fc7afdfc7b809a04d7fa29d5e742307 Author: Anthony Towns Date: Fri Jan 7 21:00:10 2011 -0800 altos: Remove redundant initialization of ao_interval variables These are all initialized in the ao_flight_drogue state transition. Signed-off-by: Keith Packard commit 57de960b8148bf485607898c3d66af6994d76481 Author: Anthony Towns Date: Fri Jan 7 20:52:33 2011 -0800 altos: Remove unused accel_vel_mach and accel_vel_boost variables Presumably left-over debugging code. Signed-off-by: Keith Packard commit ca66f86a899c191b6362a334417fc84a79349677 Author: Keith Packard Date: Fri Jan 7 20:46:29 2011 -0800 altosui: Add configuration of flight log size This adds to the TeleMetrum configuration UI the ability to set the maximum flight log size. Signed-off-by: Keith Packard commit 52ac83fedbfd380d14d4df2e79992bbdfba3552a Author: Keith Packard Date: Fri Jan 7 20:26:39 2011 -0800 altos: Check for full log and complain Reports special tone along with the continuity checks. Reports flight 0 in telemetry. Signed-off-by: Keith Packard commit 00891b40754962ef6530b237ef52017bb58112d5 Author: Keith Packard Date: Fri Jan 7 20:25:09 2011 -0800 altos: Check requested log max size against available space Make sure the amount of memory requested for a single log isn't more than is available on the device. Signed-off-by: Keith Packard commit bbddcae2a15b6d430e84956ddf26955aa9173cc0 Author: Anthony Towns Date: Fri Jan 7 20:18:25 2011 -0800 altos: Optimize Morse code generation This reduces the size of data and code needed to report the flight states Signed-off-by: Keith Packard commit 73620c41017c1774d6190dfd4be5b742eb64f8d3 Author: Keith Packard Date: Fri Jan 7 20:13:28 2011 -0800 altos: ensure erase mark is written when erasing flights It was getting called only when *failing* to erase a flight (oops), secondly, it wasn't getting written because ao_storage_flush wasn't getting called. Signed-off-by: Keith Packard commit edd22ee49adf60c35f2fe6ba97c111b7ad4131c2 Author: Keith Packard Date: Fri Jan 7 17:56:06 2011 -0800 altos: report flight log offsets in hex block numbers instead of bytes makes them compatible with the 'e' command. Signed-off-by: Keith Packard commit 1cc08af4f4a1ff61fc0deca3bdd95e8a5ca8ec5c Author: Keith Packard Date: Fri Jan 7 17:55:54 2011 -0800 altos: white space fix Signed-off-by: Keith Packard commit d8c9684239b67a69a4a3d24202a6df0d73c4f7f5 Author: Keith Packard Date: Fri Jan 7 17:54:54 2011 -0800 altos: Speed up at45 and 25lc erase speeds No need to read the block to be erased before erasing it. Signed-off-by: Keith Packard commit 2722703bd848b07a02d3ce0c83a502eca52a9f1d Author: Keith Packard Date: Fri Jan 7 14:58:39 2011 -0800 altos: support storage of multiple flights. This adds the logging support for dealing with multiple flights Signed-off-by: Keith Packard commit a9b210bc33cd95e7108ab51925fdf0d5e8deaf7e Author: Keith Packard Date: Fri Jan 7 10:05:11 2011 -0800 altos: Add configuration parameter for maximum flight log size This parameter will permit available storage to be split into multiple separate flight logs. Signed-off-by: Keith Packard commit 3bcf14f12f6681888c3162d0f33ef2d454eb75dd Author: Bdale Garbee Date: Fri Jan 7 00:52:50 2011 -0700 update changelogs for Debian build commit 408a3e04362d626778640dd0ce7d356d3863de53 Author: Keith Packard Date: Thu Jan 6 23:38:13 2011 -0800 altos: Mark end of available flight list with 'done' to make the UI code easier to write Signed-off-by: Keith Packard commit e991f52276248fa08d96fbecc458bc478e98d299 Author: Keith Packard Date: Thu Jan 6 23:35:31 2011 -0800 altos: Rip out 'optimization' in ao_log_scan Remove premature optimization to avoid re-scanning the flight logs for the best empty entry. Signed-off-by: Keith Packard commit 569a1dac55b70c30f01afa7bcb74442ecdd85d85 Author: Keith Packard Date: Thu Jan 6 22:37:38 2011 -0800 altos: Move common storage code to ao_storage.c. Add M25P80 driver This reworks the storage API so that you erase blocks and then store data to them so that the M25P80 driver will work. Signed-off-by: Keith Packard commit e4ba9bf4291bf17c777c8c3ef7c71e4a30b9947a Author: Keith Packard Date: Thu Jan 6 17:34:58 2011 -0800 altos: Require manual flight erasing. This supports flash chips that require larger erase blocks. Signed-off-by: Keith Packard commit ddcc94da4326f9ce954bd31a46b36165c58e6c18 Author: Keith Packard Date: Thu Jan 6 12:51:39 2011 -0800 altos: Simplify storage API This removes the config-specific APIs and exposes global variables for the available storage space, block size and config storage location. Signed-off-by: Keith Packard commit f3f1b1488bdc92fa9277dc549ba9f3210a8d4c8c Author: Keith Packard Date: Thu Jan 6 11:28:35 2011 -0800 altos: packet and usb i/o routines use 'char', not 'uint8_t' Just fixing the type of a local variable holding a character passed from the packet link to usb. Signed-off-by: Keith Packard commit 5688af4e4d7ca8e559d758257e79b7979f1cc924 Author: Keith Packard Date: Wed Dec 22 21:13:56 2010 -0800 altos: Add telemetrum-v1.1 directory This just clones the v1.0 build; changes will be added on top of this. Signed-off-by: Keith Packard commit 9f7296b3feab872bf51fc369ade69cc1e7cf7a3f Author: Keith Packard Date: Wed Dec 22 21:06:22 2010 -0800 altos: Split out SPI driver. For TM with the companion connector, the SPI bus will be shared among multiple devices. Split out the existing SPI code into a common driver, with the SPI bus protected by a mutex. Signed-off-by: Keith Packard commit 51c410c1c952e0e9bcf1b2c438813de63753be5f Author: Keith Packard Date: Sun Nov 28 00:24:54 2010 -0800 windows: Update NSIS installer file to use compatibility IDs This allows the file to contain a single InitDriverSetup function, making things shorter and (I hope) clearer. commit 4a42f9d5c20dcaf5fd7591ccf9e32c6130d9d538 Author: Keith Packard Date: Sun Nov 28 00:22:14 2010 -0800 windows: Add compatibility IDs to telemetrum.inf This will allow the .nsi file to reference just the compatibility ID instead of needing to have all of the USB IDs listed. Signed-off-by: Keith Packard commit 484b44e81b655f1ecb48256095382a56d2839bae Author: Keith Packard Date: Fri Nov 26 17:39:40 2010 -0800 altos: eliminate ao_wake_task Waking up a task waiting on some random object is a bad idea. Fix the waiters to look for suitable signalling. Signed-off-by: Keith Packard commit 07213dc34fa20470a4b36a327a83d75b0f010ebb Author: Keith Packard Date: Fri Nov 26 16:14:15 2010 -0800 altos: clean up radio abort paths. Share radio code. Instead of aborting the DMA and radio operation and expecting that to be handled reasonably by the radio receiving task, rewrite things so that the abort function just wakes the receiving task while that terminates the DMA and cleans up the radio. This eliminates all kinds of nasty bugs dealing with radio abort smashing the radio registers at the wrong time, or interrupting a radio transmission. Signed-off-by: Keith Packard commit b62580855c5144f5bc7e0172289bce08814d9472 Author: Anthony Towns Date: Tue Dec 14 03:40:18 2010 +1000 altosui: move maps to subdir, fix E/W mismatch commit b8d2eb5509096fd5bd04598b1312077659109620 Author: Bdale Garbee Date: Wed Dec 1 00:15:17 2010 -0700 update changelogs for Debian build commit ea95c060f8bd959cefc60dd6d411151f3c91384e Author: Bdale Garbee Date: Wed Dec 1 00:12:05 2010 -0700 fix symlink paths in rules file commit f95220b6f0cc74928e0e7d7c7e1f443eafc32a02 Author: Bdale Garbee Date: Wed Dec 1 00:03:23 2010 -0700 update changelogs for Debian build commit ea7130e953622884afc348265f5a4c58f9876823 Author: Bdale Garbee Date: Wed Dec 1 00:00:58 2010 -0700 modify Debian package build to deliver one copy of background.png for the themes and symlink it into place for gdm and slim commit 3696b30a8d1eb351353d84b5f7af8eeff55c468b Author: Bdale Garbee Date: Mon Nov 29 21:47:13 2010 -0700 update changelogs for Debian build commit 11b3f9ff715017a2dec02003275885334f22c009 Author: Bdale Garbee Date: Mon Nov 29 21:46:02 2010 -0700 releasing 0.8.1 commit 5f3f11e11dff9b9f4d1dde279c0d474de0de12a5 Author: Keith Packard Date: Mon Nov 29 20:41:49 2010 -0800 Add minimal release testing plan to Releasing Signed-off-by: Keith Packard commit f0a4deee23984a8f779917bbeaf74a66a0abf592 Author: Keith Packard Date: Mon Nov 29 20:34:27 2010 -0800 Move "Releasing" to top level This file documents the AltOS release process for all systems. Signed-off-by: Keith Packard commit b727156ef0a7fb6e442ca28be27eb344a213ecf8 Author: Keith Packard Date: Mon Nov 29 20:17:35 2010 -0800 windows: Add jfreechart.jar and jcommon.jar to windows install image These are necessary for the Graph Data button to do anything useful. Signed-off-by: Keith Packard commit 3e2220a180f95971d222a597d2057ca328c27356 Author: Bdale Garbee Date: Mon Nov 29 21:29:14 2010 -0700 adding Bdale's release process document to the source tree commit 61a924099800494b589cbbb87c65b552ccbd8394 Author: Bdale Garbee Date: Mon Nov 29 14:40:27 2010 -0700 fix an Altos vs Altus typo in the docs commit e840b6594b8a939f148fa7231e1b06a280d94074 Author: Bdale Garbee Date: Sun Nov 28 22:42:43 2010 -0700 fix section layering commit f39698bbc12afdfadfac56c90030e16db93cf4fc Author: Bdale Garbee Date: Sun Nov 28 19:46:03 2010 -0700 fix publish target in doc/Makefile commit 13cea7a96821165a10a8b2433af1da7508882b0a Author: Bdale Garbee Date: Sun Nov 28 18:48:31 2010 -0700 moved doc dir in web content to AltOS tree commit 6f3c72462af86a7d9dec20f4c813a524a5be9fbb Author: Bdale Garbee Date: Sun Nov 28 18:32:17 2010 -0700 update changelogs for Debian build commit a375942979dbcd8239d8c0addb10616e6048f6ea Author: Bdale Garbee Date: Sun Nov 28 18:31:26 2010 -0700 rewind changelog to recover from stupid build failure commit 263cf6c4fc5c1a240d719bb0ceb33393864fb3d6 Author: Bdale Garbee Date: Sun Nov 28 18:24:00 2010 -0700 update changelogs for Debian build commit 2615289265b6f8fa08827be794b4eee569fc6333 Author: Bdale Garbee Date: Sun Nov 28 18:23:17 2010 -0700 update changelogs for Debian build commit 5e23bcc2d2ad33a839fedd2158213098a05cd9ae Author: Bdale Garbee Date: Sun Nov 28 18:21:31 2010 -0700 declaring 0.8 released commit b09d3e11c32abd07f8e11b483ac4b57148f4f2d8 Author: Keith Packard Date: Sat Nov 27 23:08:41 2010 -0800 windows: Bump .inf file version commit 42c2394ccc1a1ee6dc134ed963a4f79acf031d0b Author: Keith Packard Date: Sat Nov 27 23:04:50 2010 -0800 windows: more .inf file hacking Add a LayoutFile reference Add the FakeModemCopyFileSection Copy AltosMetrum.Install section to AltusMetrum.Install.NT section. I don't know what this might do; existing files seem inconsistent. Signed-off-by: Keith Packard commit 26369a92398f4ebe3fcd54ce34cebffae0cfdf07 Author: Keith Packard Date: Sat Nov 27 22:39:31 2010 -0800 windows: remove some non-existent .inf file section references The mfglt and VerboseResultCodes sections are not present in the .inf file, so remove refernces to them. Signed-off-by: Keith Packard commit 641c5373724d34c3adfcf42420a528d6bba736b9 Author: Keith Packard Date: Sat Nov 27 22:35:18 2010 -0800 windows: try harder to get windows install to work Add devIDs to .nsi file. Fix install section name mapping from the hot-plug info. Signed-off-by: Keith Packard commit cd414e2c04ce5ecbc75f19325a6d6f82cd489fb3 Author: Keith Packard Date: Sat Nov 27 16:30:29 2010 -0800 altosui: Correct windows hardware IDs for nsis installer file Need real hardware IDs (encoded USB ids) to get windows to auto-install the driver? Signed-off-by: Keith Packard commit f834b22905db87557f729f942607dc363b013694 Author: Bdale Garbee Date: Thu Nov 25 22:31:33 2010 -0700 update changelogs for Debian build commit da3b39d6b1b5ba48686c2a4add4b5448fd5711af Author: Bdale Garbee Date: Thu Nov 25 22:29:01 2010 -0700 changed main document name from telemetrum-doc to altusmetrum commit ab6c9c983a2830bc8807e1b75d2576141b73632d Author: Bdale Garbee Date: Thu Nov 25 19:30:02 2010 -0700 update fat target in Makefiles to reflect move of altosui and libaltos commit b8f05cdc0e9b4a96852eed9d38ff6d5950e2d2ed Author: Keith Packard Date: Thu Nov 25 17:29:28 2010 -0800 altosui: Clean up flash code to ensure swing gets called from right thread This moves all of the flash code to a separate thread and passes messages back to the swing thread to keep the UI up to date. Signed-off-by: Keith Packard commit adbb14c63d85b7a54223f88ac623571456f4a462 Author: Keith Packard Date: Thu Nov 25 16:28:04 2010 -0800 altosui: Remove gratuitous threading from device flashing UI There's no need for a thread here, and swing doesn't want us to use one anyways. Signed-off-by: Keith Packard commit 7f88520089660845009148b69bfcea6c9dff9672 Author: Keith Packard Date: Thu Nov 25 16:23:18 2010 -0800 altosui: Flight data download GUI operations called only from main thread Swing doesn't like UI functions being called from non-dispatch thread, so fix up the eeprom download code to use SwingUtilities.invokeLater to make sure this works right. Signed-off-by: Keith Packard commit 6d3612e267cd4c1e7fdd74fc33952b3f26f870f5 Author: Keith Packard Date: Thu Nov 25 16:09:37 2010 -0800 altosui: Eliminate unnecessary thread from config UI There's no reason to use a thread to run a dialog box, and swing doesn't like threads anyways. Signed-off-by: Keith Packard commit 12fb7f0e70cd244475d84469f93283112478d1e1 Author: Keith Packard Date: Thu Nov 25 15:56:42 2010 -0800 altosui: Only call swing display functions from main thread. Swing insists that all display functions be called from a single thread, and the flight window wasn't following this for display updates. Use SwingUtilities.invokeLater to make sure the flight UI updates happen in the right context. Fixes a UI freeze on Mac OS. Signed-off-by: Keith Packard commit b74cec6cd0bc043f53e9e28472765aa343136813 Author: Bob Finch Date: Thu Nov 25 13:30:48 2010 -0700 Updated AltOS PKGBUILD to track makefile changes commit f88bde21d76a4ff91099a5051153ebace1619978 Author: Keith Packard Date: Thu Nov 25 11:16:55 2010 -0800 altosui: Hack up standalone makefile to maybe build altosui again This isn't tested, but at least the paths are more likely to be correct Signed-off-by: Keith Packard commit 3d98440d53378aaa6da87ed65e9abb2f96f7ee49 Author: Keith Packard Date: Thu Nov 25 11:16:28 2010 -0800 altosui: Make windows bits build after moving altosui directory Signed-off-by: Keith Packard commit 4893ed50bc14772986ac02f9b39928f1882da923 Author: Keith Packard Date: Wed Nov 24 23:54:08 2010 -0800 Revert "altos: Don't abort radio transmissions with ao_radio_abort" This reverts commit 54468e5dc567aaac5c5c20e921859b7cec28bb88. With this patch in place, TD could not be placed in 'packet' mode. commit cb08bc264c71ca972027392b42f347a03df76a43 Author: Keith Packard Date: Wed Nov 24 22:55:08 2010 -0800 doc: Rename telemetrum-doc as altusmetrum Signed-off-by: Keith Packard commit 554bdd25e132dbaec322bc11f94093d2c2e78751 Author: Keith Packard Date: Wed Nov 24 22:49:33 2010 -0800 doc: Add more authors, fix URL formatting, note that AltosUI actually exists Add aj and bfinch as authors. Insert an acknowledgements section. Fill in the Fire Igniter section in the AltosUI chapter. Then change the section talking about the future plans for Java to mention that they actually exist now. Signed-off-by: Keith Packard commit bcf78b67717374b5971820021b83061e2e9734cf Author: Keith Packard Date: Wed Nov 24 21:39:18 2010 -0800 doc: Reformat altos to use sections for each function This places them in the TOC, making them easier to find. Signed-off-by: Keith Packard commit 51c7741040d95c5deece939dae5e4136cc04afc4 Merge: d1dbe3b 4e47c44 Author: Keith Packard Date: Wed Nov 24 21:00:52 2010 -0800 Merge branch 'buttonbox' Conflicts: doc/telemetrum-doc.xsl Pull the buttbox version of the docs in as it had been updated. Signed-off-by: Keith Packard commit 4e47c44d335276cf0dc5ed3a0756e50c98c1b9b9 Author: Bdale Garbee Date: Wed Nov 24 21:44:53 2010 -0700 manually fold in documentation work from the master branch commit 8a68c1da253c0b29a7cb9c7540c20585ad6e3dec Author: Bdale Garbee Date: Wed Nov 24 21:21:53 2010 -0700 tweak rev history commit 7cd1c7765d137df711caeeb69abaaba1b36e0a65 Author: Bdale Garbee Date: Wed Nov 24 20:53:36 2010 -0700 fix missing section close in Site Map content commit db2b19b8f0d452d682d53c7ed0ff6e359b46efa0 Merge: b372f3c 915f881 Author: Keith Packard Date: Wed Nov 24 18:57:35 2010 -0800 Merge remote branch 'aj/buttonbox' into buttonbox commit b372f3c0ee4ec49aabe61c169cb1eb9bb4fb2cfc Author: Keith Packard Date: Wed Nov 24 18:50:46 2010 -0800 Missing change to top level Makefile to build altosui Signed-off-by: Keith Packard commit 915f881d61294dc6f5a6a3e8d75567e18492a631 Author: Anthony Towns Date: Thu Nov 25 09:52:30 2010 +1000 doc: Document altosui "Site Map" tab commit f01096c4b42f9a4720ed0414826c2a283a992545 Merge: 357826a 3fbefb3 Author: Anthony Towns Date: Thu Nov 25 09:10:50 2010 +1000 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox commit 3fbefb3eea981d34a09496cf8abf0119de2e35bf Author: Keith Packard Date: Wed Nov 24 14:57:57 2010 -0800 Move altosui to the top level, placing libaltos inside it. Signed-off-by: Keith Packard commit 357826aa9c7b42c59f5d52b8eb016d73b6da0c7f Author: Anthony Towns Date: Thu Nov 25 09:07:34 2010 +1000 docs: Document altosui "Graph Data" button commit 7811e6dfa6caf10251da7df7c24b98cdc3787892 Merge: 71b1949 7a50837 Author: Anthony Towns Date: Thu Nov 25 08:47:36 2010 +1000 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox commit 7a50837ea0d92db3f469f197ec8210aee22aa143 Author: Keith Packard Date: Wed Nov 24 10:55:18 2010 -0800 altosui: Make sure packet mode is turned off when the connection fails When the packet connection times out, turn packet mode off when closing the serial port. Signed-off-by: Keith Packard commit 7d90e2f6009e060fb59c519f7e564483a7ca6872 Author: Keith Packard Date: Tue Nov 23 20:17:44 2010 -0800 altosui: Let people fire igniters that don't read as 'ready' This provides for igniter testing with LEDs or other materials that don't look like regular igniters. Signed-off-by: Keith Packard commit f3233985a132e1d660e6df12d0056b6729f16faf Author: Keith Packard Date: Tue Nov 23 19:09:31 2010 -0800 altosui: Disable radio configation over packet link. Attempting to configure the radio over the packet link will only end up confusing the user, so disable it. This also works around a bug in older TM code which would lock up when trying to do this. Signed-off-by: Keith Packard commit 6cd9be22f06f21d12ee2f668989d83d3c61d14c0 Author: Keith Packard Date: Tue Nov 23 19:08:07 2010 -0800 altosui: New AltosSerial.set_radio function sets channel/call Use this anytime you need to set the device radio channel and call sign, either for telemetry reception or packet mode origination. This uses the saved callsign and per-device radio channel number. Do not use this when opening a telemetrum as there won't be a saved channel number. Signed-off-by: Keith Packard commit ed7cf7d262fcf7c0c677c2fb981582b571de9e5e Author: Keith Packard Date: Tue Nov 23 19:04:55 2010 -0800 altosui: Make AltosSerial.flush_input keep reading while non-empty Flushing the input buffer can take a while, especially over the packet link. Keep reading while stuff is appearing on the reply queue. Signed-off-by: Keith Packard commit 3b9db8c82d26a6a2e43d4ca40742fc1bdc502380 Author: Keith Packard Date: Tue Nov 23 19:02:54 2010 -0800 altos: Make radio test command careful with the radio mutex. Remember whether the radio test mode is on or off and don't try to do either of them twice to prevent the mutex from being acquired or released twice. Signed-off-by: Keith Packard commit 54468e5dc567aaac5c5c20e921859b7cec28bb88 Author: Keith Packard Date: Tue Nov 23 18:57:49 2010 -0800 altos: Don't abort radio transmissions with ao_radio_abort We only want to abort pending radio reception to release the radio for other use, or to change the radio channel. Let radio transmission proceed. This fixes a problem with using packet mode to configure the radio channel; if the packet transmission is aborted, the TM ends up wedged. Signed-off-by: Keith Packard commit d873dc28f0752aeb58a6263e42bdd5b9095bd392 Author: Keith Packard Date: Tue Nov 23 18:56:46 2010 -0800 altos: remove unused variable from ao_igniter The 'status' variable used to hold a reported status value from the igniter after firing, but we ignore that now. Signed-off-by: Keith Packard commit 71b1949e50f4533bcf44537da65b19bc67863c8e Merge: a79225c f1892b1 Author: Anthony Towns Date: Wed Nov 24 12:14:11 2010 +1000 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox commit f1892b137b1de3d6caf0293bd40ed5c3e4948066 Author: Bdale Garbee Date: Tue Nov 23 18:58:11 2010 -0700 lose the placeholder on how GPS works, as it's going to be a while before I tackle that, if ever. commit a79225c215f17fa5218ddd9db4fc3f5c563a9f74 Merge: 84cd5d4 853b711 Author: Anthony Towns Date: Wed Nov 24 11:55:14 2010 +1000 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox commit 853b7112e34212040c4cb7289f9cfdb2f3ea9f90 Author: Bdale Garbee Date: Tue Nov 23 18:53:18 2010 -0700 merge Keith's AltosUI documention into "the big book" commit 84cd5d42d8b5659463544fe2a400758b56478609 Author: Anthony Towns Date: Wed Nov 24 02:13:32 2010 +1000 altosui: sitemap uses rocket gps if no pad gps commit c7119c21baa9d4ca681975b8613ade6593f65577 Author: Anthony Towns Date: Wed Nov 24 02:11:36 2010 +1000 altosui: don't switch away from user selected tab commit ae55a107f12546dc65f04618c7abc17beb920d73 Merge: d1005f6 737f2fd Author: Anthony Towns Date: Wed Nov 24 01:53:46 2010 +1000 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox commit 737f2fdd012202f453120ece117ae5e859b32082 Author: Keith Packard Date: Mon Nov 22 22:26:19 2010 -0800 doc: Add internal documentation for AltOS Signed-off-by: Keith Packard commit 5523e7d55ecc8d310e495fa4f5115f7483c42d65 Author: Bdale Garbee Date: Mon Nov 22 21:07:10 2010 -0700 add a rudimentary --help for command line use commit d1005f68376d695039c314b8d7a68bbf9acbca4f Merge: 9a83e0d 22c0978 Author: Anthony Towns Date: Tue Nov 23 10:14:55 2010 +1000 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox commit 22c09781af1df4b38562b577e9926c23e4a397f2 Merge: b27327a a79606a Author: Keith Packard Date: Mon Nov 22 16:02:22 2010 -0800 Merge remote branch 'origin/buttonbox' into buttonbox commit b27327a05d249eaf969b67d2a8d12fc6a93841f0 Author: Keith Packard Date: Mon Nov 22 15:56:04 2010 -0800 altos: assume igniter worked. Many igniters don't go open when fired, so there's no way to know if they worked. Assume they did as a failed igniter is unlikely to do anything when fired again anyways. Signed-off-by: Keith Packard commit 68323cbb222f1f33198a42abaa0550af22f75a93 Author: Keith Packard Date: Mon Nov 22 15:53:27 2010 -0800 altosui: Close serial port when debug link fails If the debug connection isn't working, close down the serial port when reporting the failure. Signed-off-by: Keith Packard commit 9a83e0dc79f7a7467c7814d58daa2a2b89e50972 Merge: 902735f a79606a Author: Anthony Towns Date: Tue Nov 23 08:07:04 2010 +1000 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox commit a79606a6507fc01a74910f7959e84c4e9a730714 Author: Bob Finch Date: Mon Nov 22 12:24:42 2010 -0700 Added PKGBUILDs for deps into contribs commit 377ee7e90ecd028f984cd1abce96b2efc3b5b977 Author: Keith Packard Date: Sun Nov 21 14:03:17 2010 -0800 altos: Add on/off modes to 'C' command This lets the user turn the radio on/off and then invoke other commands. Signed-off-by: Keith Packard commit 902735ffbfdd97672d52b09f17cdcd619193fd05 Author: Anthony Towns Date: Mon Nov 22 05:29:26 2010 +1000 altosui: keep sitemap more centred on rocket commit b85df38b5611e45cb9296df07b720badf74ac26e Author: Anthony Towns Date: Mon Nov 22 05:22:17 2010 +1000 altosui: improve sitemap scrolling behaviour commit 4a9ded5b39ed08e13abc2cddba8b712f62b983f2 Author: Anthony Towns Date: Sun Nov 21 17:39:50 2010 +1000 AltosSiteMap: ensure buffer around active tile commit ec47bc93a487614714a752cb30ec9fe3d8f72929 Merge: 0393830 e7954c8 Author: Anthony Towns Date: Sun Nov 21 16:08:37 2010 +1000 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox commit e7954c820763f80e993f9f822e837725cf36af84 Author: Keith Packard Date: Sat Nov 20 22:03:26 2010 -0800 altosui: When fixing eeprom gps time information, make GPS data valid Eeprom files may be missing the GPS time (due to a firmware bug). Working around this involves finding the next valid GPS time and using that to create a fake GPS time entry. However, that next GPS time may not be locked or may have few sats as it is from the boost stage of the flight. Fix this by simply forcing the fake time packet to have 4 sats and be locked. Signed-off-by: Keith Packard commit 0393830f85da5efc96bbdf0d9769b66019c34b33 Author: Anthony Towns Date: Sun Nov 21 15:13:35 2010 +1000 AltosSiteMap: limit nr of tiles to 200x200 commit a08b2a6363c194195db92029743f6612676373ce Author: Anthony Towns Date: Sun Nov 21 15:03:21 2010 +1000 AltosSiteMap: never accept 0,0 as lat/long commit 84e570d8a8a52e0d358582135ec1b3a12be94c26 Author: Anthony Towns Date: Sun Nov 21 14:45:10 2010 +1000 AltosSiteMap: refactor tile collection commit 71e487344395a8efc9cd279aad92f601ff4c6d3d Author: Anthony Towns Date: Sun Nov 21 14:05:00 2010 +1000 AltosSiteMap: thread safe tile addition commit c040bcd06679484175542208fb564d0271a7fc1b Author: Anthony Towns Date: Sun Nov 21 13:19:36 2010 +1000 AltosSiteMap: try to get new tile construction right commit c3994dd82d489289ebc99ff9c5fa88f560c023ac Author: Anthony Towns Date: Sun Nov 21 13:07:11 2010 +1000 AltosSiteMap: extend map if rocket goes far away commit 835b903727a2eabda8d9659cc46e53301f92897c Merge: 440a0f3 8789135 Author: Anthony Towns Date: Sun Nov 21 11:15:02 2010 +1000 Merge branch 'sitemap' into buttonbox Conflicts: ao-tools/altosui/AltosSiteMap.java commit 878913551a1e4e3c8f2b39fa4aeb234880735a1c Author: Anthony Towns Date: Sun Nov 21 10:55:22 2010 +1000 AltosSiteMap: explain tile size better commit 440a0f3f5130eb0c8e614691892be8c94e7fd3c3 Author: Keith Packard Date: Sat Nov 20 16:55:12 2010 -0800 altosui: Set site map flight path lines to 6 pixels anti-aliased. Much more visible over the map. Signed-off-by: Keith Packard commit 2a7dc3ba36bac81640a9498e0d0caf1470b57c19 Merge: e5b1ada ece2c86 Author: Anthony Towns Date: Sun Nov 21 10:45:15 2010 +1000 Merge branch 'buttonbox' into sitemap Conflicts: ao-tools/altosui/AltosFlightUI.java commit 8df185cd95cfecbed8272dd1275d077c5b45535b Merge: ece2c86 1e71264 Author: Keith Packard Date: Sat Nov 20 16:35:48 2010 -0800 Merge remote branch 'aj/sitemap' into buttonbox Conflicts: ao-tools/altosui/AltosFlightUI.java Signed-off-by: Keith Packard commit e5b1adae9b23b98a6321986f5cd67c9d3166b87f Author: Anthony Towns Date: Sun Nov 21 10:34:39 2010 +1000 AltosSiteMap: better gps check, lower zoom commit ece2c86e2641b2cd613791293526c492b1606aa1 Author: Keith Packard Date: Sat Nov 20 16:19:42 2010 -0800 altosui: Rewrite info table to mix with scroll pane well. Fix startup size Using a single table for the info table means that the scroll pane automatically picks up the table headers and shows them above the scrollable view. This patch also fixes the application size at startup so that no scrollbar is required in the info table, and the window is < 800x600. Signed-off-by: Keith Packard commit 1e712647dd6df1e77650db705f3ac32a3c8f6907 Author: Anthony Towns Date: Sun Nov 21 08:58:44 2010 +1000 altosui: reindent commit a59a204e188e40ec8848a0dc63d6de710cee3039 Merge: 8263630 37f0201 Author: Anthony Towns Date: Sun Nov 21 08:56:13 2010 +1000 Merge branch 'buttonbox' into sitemap commit 82636305021c41d676f5f0f11378724fe0de0079 Author: Anthony Towns Date: Sun Nov 21 08:44:13 2010 +1000 AltosSiteMap: be more polite about preferred size commit 37f0201d724693528f37ac7d275f68f90cf94da0 Author: Keith Packard Date: Sat Nov 20 14:31:23 2010 -0800 altosui: change descent tab formatting to four columns This places labels to the left of each field. For igniter voltages, it uses three columns for the labels. Signed-off-by: Keith Packard commit 66ebd954d9c9a44a8db0ee713c682e39306fabd8 Author: Anthony Towns Date: Sun Nov 21 08:28:24 2010 +1000 Add GrabNDrag.java commit 72f5e05f9f0055f2cef8b840812f090556c94338 Author: Anthony Towns Date: Sun Nov 21 08:18:39 2010 +1000 AltosSiteMap: major refactoring commit b47517d4c2e49f6f7b9954d2c85f96397fe1103e Author: Keith Packard Date: Sat Nov 20 14:06:37 2010 -0800 altosui: re-indent commit 6f8bc2ad20b715343e0510563ab0f14787ef3e07 Author: Anthony Towns Date: Sun Nov 21 01:34:52 2010 +1000 AltosDescent: switch elev from height to range commit 89f44c5587ea4f927d5e398b6af919df0d6561c3 Author: Anthony Towns Date: Sun Nov 21 01:27:01 2010 +1000 AltosAscent/Descent: tidy up layout commit 51e403145d28ac913e36d205077a613845596be2 Author: Anthony Towns Date: Sun Nov 21 00:17:51 2010 +1000 AltosSiteMapTile: draw boost circle as well as landed commit 25ffe1cc7823895886b4777f310b4bda1c80133b Author: Anthony Towns Date: Sun Nov 21 00:07:16 2010 +1000 AltosSiteMap: automatic fetching of map data commit 20f714bbe3137de8fb7491b39985021fd1774930 Author: Anthony Towns Date: Sat Nov 20 22:49:51 2010 +1000 AltosSiteMapTile: seperate map and drawing layers commit 58f8d069ce9488e2987b8e92caa69fe68cda7569 Author: Anthony Towns Date: Sat Nov 20 21:06:37 2010 +1000 AltosSiteMap: add autoscroll and grabndrag scroll commit 74cab8503b51ba6fb05a4d12a031c749e870b0ef Merge: 0ecf033 9a99cab Author: Anthony Towns Date: Sat Nov 20 18:20:45 2010 +1000 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox commit 0ecf033110084f1a8be98282d7029dc14f70dab5 Merge: 081fbd5 71c41ea Author: Anthony Towns Date: Sat Nov 20 18:14:30 2010 +1000 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox commit 9a99cabc1c34c657fc95246192ba6d330f5f22d3 Author: Keith Packard Date: Sat Nov 20 00:13:58 2010 -0800 altosui: Fix channel changing in flight UI to actually work Replacing the menu with a combo box required reworking the way events are delivered from that widget back to the channel changing function. Just delete the old magic and use the JComboBox action listener directly. Signed-off-by: Keith Packard commit 71c41eadd12c3ece5fffce7669e4991778046d4e Author: Keith Packard Date: Sat Nov 20 00:09:03 2010 -0800 altosui: Initialize display thread state in constructor instead of run Some state will get set before run is called, initializing it there can be too late. Signed-off-by: Keith Packard commit 081fbd5715f9d3d81d98e149fb95d40447c07a79 Merge: 90b9bc4 7920ed5 Author: Anthony Towns Date: Sat Nov 20 17:40:49 2010 +1000 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox Conflicts: ao-tools/altosui/AltosFlightUI.java commit 7920ed5c34b088f45ce4213b061ddd1ffe22cee8 Author: Keith Packard Date: Fri Nov 19 23:18:51 2010 -0800 altosui: calling thread.interrupt with null thread doesn't work well This was a left-over from debugging the previous patch. Signed-off-by: Keith Packard commit 8c8dc3794c7b5fa5a5b43b1c461d6c8bb3ab425d Author: Keith Packard Date: Fri Nov 19 23:09:15 2010 -0800 altosui: When switching log files, don't terminate log thread The log thread automatically switches output files when the incoming telemetry changes. Don't use 'close' for that as 'close' terminates the log thread as well as closing the file. Create a new 'close_log_file' function which just closes the file. Signed-off-by: Keith Packard commit 594e80572821f1848db062d0cff18ca8bf0d90ce Author: Keith Packard Date: Fri Nov 19 22:44:48 2010 -0800 altosui: switch channel selector to combo box. Shorten displayed device names A combo box displays the current value, which is quite nice to have. Add a 'toShortString' for AltosDevice so that the window frames and error messages don't have extra spaces generated by the altos_device toString method. Signed-off-by: Keith Packard commit fa07afc73bc5eccff8464a2def05ad600da33c97 Author: Bdale Garbee Date: Fri Nov 19 23:33:42 2010 -0700 update turnon scripts to use stashed copies of stable release firmware commit 9ffc2eb53a47e435f39b02896b0e43ae5f47f450 Author: Keith Packard Date: Fri Nov 19 18:25:48 2010 -0800 altosui: Use timeouts to recover from broken packet links. This puts timeouts every place the system reads from the packet link and aborts the in-progress operation if it takes more than a second to get a response. Also mixed in here are persistent igniter status displays for the ejection testing UI. Signed-off-by: Keith Packard commit 68078eab3c07d8dc83302747cf6f3dcb1797c6ce Author: Keith Packard Date: Fri Nov 19 20:44:29 2010 +0800 doc: Document the 'Flash Image' operation. Signed-off-by: Keith Packard commit b4bdda65488e8ef27d2889cb6cc8eda3c5d50e0a Author: Keith Packard Date: Fri Nov 19 20:29:14 2010 +0800 doc: git ignore generated doc files Signed-off-by: Keith Packard commit f0542085de2139ef562af068ec05fa73f47c73b1 Author: Keith Packard Date: Fri Nov 19 20:26:49 2010 +0800 doc: Add preliminary altosui documentation Also, update the Makefile to allow for further documents to be added without a lot of custom rules. Signed-off-by: Keith Packard commit 0e7a10f71803d60f8b34c5a91efd220449442769 Author: Keith Packard Date: Fri Nov 19 17:16:03 2010 +0800 altosui: Clean up global AltosUI configuration settings dialog This dialog had a mish-mash of styles and was confusing. Now it's got a label for each line, and suitable setters for each element Signed-off-by: Keith Packard commit 8f72f08839346fb225238420324f0edcd070e531 Author: Keith Packard Date: Fri Nov 19 17:14:17 2010 +0800 altosui: Unify datafile selection to AltosDataChooser Instead of having several separate intefaces, use a single dialog for selecting data files for graph/export/replay. Signed-off-by: Keith Packard commit 24ffcf86c43290ce0f70fb4ee0984b3debdb8a5f Author: Keith Packard Date: Fri Nov 19 15:41:30 2010 +0800 altosui: Add igniter ground testing code Not yet hooked up, but the UI is finished. Signed-off-by: Keith Packard commit 90b9bc4475011bead7117ed72fa5efa0f77b2813 Author: Anthony Towns Date: Fri Nov 19 13:30:00 2010 +1000 AltosSiteMapTile: adjust scale to 1 nmi per tile commit fa45336062523838ba8abb08427cdc4d9c7de7a8 Author: Anthony Towns Date: Fri Nov 19 13:17:29 2010 +1000 AltosSiteMapTile: adjust centering calculation commit fda93afcd8aa4133b0e5f008b824d072e338d0ed Author: Anthony Towns Date: Fri Nov 19 13:02:05 2010 +1000 AltosSiteMapTile: autoscale to about 2 nmi per tile commit 483346a03c94b200692f5e6d59f3feee4dcf2ace Author: Anthony Towns Date: Fri Nov 19 12:09:46 2010 +1000 altosui: tile site maps commit 939be6793238a275b7682ecc376fed14379cf044 Merge: e68fe94 1a4b6e9 Author: Anthony Towns Date: Thu Nov 18 05:54:06 2010 +1000 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox Conflicts: ao-tools/altosui/AltosFlightUI.java commit 1a4b6e96f823035b113f01d1bdfd61afc1f33e25 Author: Keith Packard Date: Tue Nov 16 22:46:29 2010 +0800 altosui: Add igniter status to ascent and descent tabs Monitor igniters during all phases of the flight. Signed-off-by: Keith Packard commit d0eb41619544ead6d9dab3a8d024a12936c9cdd0 Author: Keith Packard Date: Tue Nov 16 22:20:00 2010 +0800 altosui: Cleanup flight UI layout Use common constants for fonts and insets Shrink fonts so that the window is < 600 pixels tall. Signed-off-by: Keith Packard commit fcca333cda64be35f0c9fb0109eef1be3709dddd Author: Keith Packard Date: Tue Nov 16 21:49:59 2010 +0800 altosui: Add callsign configuration in AltosUI configuration dialog This callsign is used during packet communication. Signed-off-by: Keith Packard commit d1dbe3b69e6f95ef8ecd4cf959863b922ab47c66 Author: Bdale Garbee Date: Mon Nov 15 11:08:00 2010 -0700 add a paragraph about forcing TM back to idle mode if an accel cal goes badly commit 39e371561469d8e5059638ffa4e7075f391de268 Author: Keith Packard Date: Mon Nov 15 23:14:51 2010 +0800 altosui: add reboot button to telemetrum configuration UI This lets you reconfigure and reboot telemetrum, including over the radio link. Signed-off-by: Keith Packard commit 257e97137325f5dbbd6aa034f20fd6937b67df90 Author: Keith Packard Date: Mon Nov 15 22:38:35 2010 +0800 altosui: eliminate menu bar, moving elements to buttons. This adds a new 'configure AltosUI' dialog to set the log directory and voice preferences. Signed-off-by: Keith Packard commit 524644d8d8ce3f8a5a914ecfc7e2a8d474d89095 Author: Keith Packard Date: Mon Nov 15 22:04:44 2010 +0800 altosui: oops, missed a file in the previous commit AltosSerialInUseException.java just defines a new exception, thanks to java for making this live in a separate file. Signed-off-by: Keith Packard commit 511903704f7e1b22e88dd3e3cc35fd3c0583820e Author: Keith Packard Date: Sun Nov 14 03:26:57 2010 -0800 altosui: With --replay option, exit when replay window is closed Otherwise, the application hangs around forever. Signed-off-by: Keith Packard commit 11c95f687b1f68d35fa1a0af2c4e7982b8bb226a Author: Keith Packard Date: Sat Nov 13 17:09:51 2010 -0800 altosui: Replace flight status table with labels, fix resize. There's no reason to use a table for the flight status data, replace that with a selection of widgets instead. Also, set all of the grid bag constraints for the various flight status displays so that resize does something sensible. Adds a scrollbar to the table display so that it can shrink. Signed-off-by: Keith Packard commit dcfa56498d1b65a213b8aba9cbd6c4806532383c Author: Keith Packard Date: Sat Nov 13 16:07:04 2010 -0800 altosui: Open serial device at 'new' time. Prohibit duplicate opens. With the per-serial UI, there's never a reason to create a serial device without opening it right away. This eliminates the bug caused by not opening the serial device for telemetry reception. Serial devices can now be opened only once; this eliminates errors when trying to reflash or configure devices while receiving telemetry. Signed-off-by: Keith Packard commit 8463ffcaca6bcd31e645aba71c171f548dce96d8 Author: Keith Packard Date: Sat Nov 13 15:19:14 2010 -0800 altosui: Eliminate unncessary import altosui lines Java appears to automatically import every module from the current package. Signed-off-by: Keith Packard commit 566c6486c8815ae241e0b116a93b1a0ff4783831 Author: Bdale Garbee Date: Sat Nov 13 12:19:12 2010 -0700 continuing to work on the docs commit e68fe9454352087889c560d95797922493117acb Author: Anthony Towns Date: Sun Nov 14 00:59:01 2010 +1000 AltosSiteMap: add targeting circles around landing site commit 1e7e02987276847274493312202d22222c953149 Author: Anthony Towns Date: Sun Nov 14 00:57:45 2010 +1000 AltosTelemetryReader: actually open serial port commit 9c32b93ef5fb43558fb0179ea1b047e35b7ed6e8 Merge: 991541f a6f30fa Author: Anthony Towns Date: Sun Nov 14 00:29:11 2010 +1000 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox commit a6f30fae906bd87dff192c5fd4d10df283f99930 Author: Keith Packard Date: Fri Nov 12 17:02:22 2010 -0800 altosui: Add RF calibration to TeleMetrum config dialog I think that's the last user-settable value. Signed-off-by: Keith Packard commit 1bdc6166f3bc5ce3f8e55acb1484923781412e21 Merge: f111871 5c6a533 Author: Bdale Garbee Date: Fri Nov 12 17:32:43 2010 -0700 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit f1118717780a81f9257d2eed7828b66538deb8a8 Author: Bdale Garbee Date: Fri Nov 12 17:32:21 2010 -0700 fold in content from Keith's email on the re-flashing subject commit 7def9dd0d0a4ce9cf7c65de573100e664f278717 Author: Bdale Garbee Date: Fri Nov 12 10:58:54 2010 -0700 first cut at instructions on how to re-flash TM and TD devices based on email reply to a user who asked commit 991541f57f065f429c6ec425efd6ac731280b2c1 Author: Anthony Towns Date: Fri Nov 12 23:42:42 2010 +1000 better error behaviour if no map commit 1bcfa22de7821984149db10cb79913efed36b41e Author: Anthony Towns Date: Fri Nov 12 23:29:40 2010 +1000 pull up maps for arbitrary locations commit beb6c881ec006241c7d2820c64e5381131d41180 Author: Anthony Towns Date: Fri Nov 12 03:24:26 2010 +1000 make infotable scrollable, revert its fontsize to 14 commit 0327c1da01a3f6ede01f05c1d775651a57fd0c68 Author: Anthony Towns Date: Fri Nov 12 02:08:58 2010 +1000 tabs -> spaces commit 81e7b43ecad666e2e2310c7c94184f888bc86585 Author: Anthony Towns Date: Fri Nov 12 02:07:41 2010 +1000 add site map tab, at least for QRS launches commit 5394548fa5c7bdbfcc01e8aa19e93e1cf6345e2a Merge: 891e629 75f7698 Author: Keith Packard Date: Wed Nov 10 22:11:21 2010 -0800 Merge remote branch 'aj/buttonbox' into buttonbox commit 75f7698b99a661ed17a91748a99699fa6761772a Author: Anthony Towns Date: Thu Nov 11 16:06:32 2010 +1000 add compass bearing during descent commit cc0a730de093c49be2a921101d27622b6f592e92 Author: Anthony Towns Date: Thu Nov 11 15:57:52 2010 +1000 add compass bearing to voice output commit 317ec72a34906faad88c6924e634617b074e71db Author: Anthony Towns Date: Thu Nov 11 15:52:01 2010 +1000 use grayled.png for off commit 8503943e3613f8670b128012b12ff14fb54321d7 Author: Anthony Towns Date: Thu Nov 11 15:45:43 2010 +1000 reduce font size for FlightInfoTable commit 3ffaa5d1c00b28be20fd4a26deb7bd41d953e92a Author: Anthony Towns Date: Thu Nov 11 15:43:05 2010 +1000 read preferences for --replay commit 1f3e091efdfb2fe6f06a066cac60f5d267b94856 Author: Anthony Towns Date: Thu Nov 11 15:40:37 2010 +1000 add --replay command line argument commit b16b873723ee3e5097e6725c59ce191119439ad7 Author: Anthony Towns Date: Thu Nov 11 15:38:27 2010 +1000 use value_font for values commit 891e629f6ba20654b614f3ca7211a0f1c92670cb Author: Keith Packard Date: Wed Nov 10 16:28:19 2010 -0800 altos: Use grey leds when unlit - easier to see commit 5c6a5335a057be0219450b4b9889c647d8d4a012 Author: Bob Finch Date: Mon Nov 1 14:36:41 2010 -0600 Updated PKGBUILD-git.altos Signed-off-by: Keith Packard commit b0d31910da592e2f67c47c8fc3e15ce8135d5094 Author: Keith Packard Date: Tue Nov 9 23:34:32 2010 -0800 altosui: Add ascent, descent and landed tabs This completes the set of tabs for in-flight status information. Signed-off-by: Keith Packard commit 22d00785188a880700cd372528189a7a15278da9 Author: Keith Packard Date: Tue Nov 9 14:40:58 2010 -0800 altosui: Add tab UI with 'pad' mode. This creates a multi-tab interface for flight monitoring and includes a special tab for 'pad' mode. Signed-off-by: Keith Packard commit eb77e806ded99532dc7eaa39c1893f075b028af6 Author: Keith Packard Date: Tue Nov 9 10:21:34 2010 -0800 altosui: Create abstract interface for flight data display This allows the implementation of the flight data display to occur in the flight UI instead of the display thread. Signed-off-by: Keith Packard commit a0a92c605e238277c9881545a7226e53b5dbc295 Author: Keith Packard Date: Mon Nov 8 22:17:26 2010 -0800 altosui: Fix more calls to AltosPreferences.channel() Oops. Two more. Signed-off-by: Keith Packard commit 94f4a50d6430cc8280cbdaa9f39d3cb858d0e077 Author: Keith Packard Date: Mon Nov 8 22:10:46 2010 -0800 altosui: Fix channel setting at serial open time Was using the previous non-device-specific preferences API. Signed-off-by: Keith Packard commit 6b17d276271faa8a420a1c8f6be17faaa0c7043c Author: Keith Packard Date: Mon Nov 8 22:07:04 2010 -0800 altosui: Create buttons for main actions Signed-off-by: Keith Packard commit 16916be51d746b1e1057b3219e5bec8f8814259e Author: Keith Packard Date: Fri Nov 5 23:44:47 2010 -0700 altosui: Split out flight monitoring to separate window This creates a per-TD (or replay) window to contain the flight monitoring information, allowing multiple monitors. This also adds per-TD preferences for monitoring channel. Signed-off-by: Keith Packard commit ca931b1c484bd6b64617370e81b16e169fdae1c2 Author: Bdale Garbee Date: Wed Oct 6 17:47:44 2010 -0600 update changelogs for Debian build commit 811ced628d586134224c1b501b40ce9eb435fc7c Author: Keith Packard Date: Wed Oct 6 16:42:27 2010 -0700 altosui: Separate out jfreechart and jcommon directories This allows these packages to be referenced separately Signed-off-by: Keith Packard commit c2c4d515ef9cc2cae8a8f2803e9498bb0794c4ed Author: Keith Packard Date: Wed Oct 6 16:25:49 2010 -0700 altosui: Remove ability to graph data in .csv files There's no reason to support these files when the raw .eeprom or .telem files which generate them should be used instead. Signed-off-by: Keith Packard commit d5caf6f2f4d9257e26aa4305b26c02d1b263fa24 Author: Bdale Garbee Date: Wed Oct 6 17:14:35 2010 -0600 remove the csv build dep, as that code will be abandoned commit 43e23a60780191e3c6f61df44c5dd08cc8604c51 Author: Bdale Garbee Date: Wed Oct 6 16:27:57 2010 -0600 update changelogs for Debian build commit 8103432bf7adfe6ee5bf3ee42e1672475e6edd5a Author: Bdale Garbee Date: Wed Oct 6 16:26:33 2010 -0600 update changelogs for Debian build commit 635066cd35fb24cacf8400a477ea4b4e3dd2c39c Author: Bdale Garbee Date: Wed Oct 6 16:26:19 2010 -0600 update changelogs for Debian build commit 4396aaaf34cda3751dcca0eceb05b4ffeb411cde Author: Bdale Garbee Date: Wed Oct 6 16:25:22 2010 -0600 add build-dep on libcsv-java commit 7475ab5804bf3fb12b1b755e850af90d5a15d3eb Author: Bdale Garbee Date: Wed Oct 6 16:19:35 2010 -0600 update changelogs for Debian build commit d8a2f4ceb1c70a6be976a78e2264c961de2f2277 Author: Bdale Garbee Date: Wed Oct 6 16:18:45 2010 -0600 add build dep on jfreechart lib commit f0d1468ceae065f0cdae6f6ae3323dec5636f073 Author: Keith Packard Date: Tue Sep 28 17:56:49 2010 -0700 altosui: Add KML file export. Command line has switches now, --kml and --csv Export save dialog has combo box to select kml or csv result. Signed-off-by: Keith Packard commit 5a119fd92532d53e552efe1f7c61e87181fcace0 Merge: 28da340 82744c3 Author: Keith Packard Date: Mon Sep 27 22:28:07 2010 -0700 Merge remote branch 'aj/master' commit 82744c3497d37650b88dee80be7956c4bd1cffb2 Author: Anthony Towns Date: Tue Sep 28 15:27:07 2010 +1000 Add callsign/serial/flight to graph title commit 28da3406426437604125d332e4cda90d459df487 Author: Keith Packard Date: Mon Sep 27 22:26:56 2010 -0700 altosui: use Altos constants in graphing code The Altos class nicely defines constants for all of the flight states. Signed-off-by: Keith Packard commit ce7f59fbfb5a94a67a4ceced3cc371b4c6b6e5d1 Author: Anthony Towns Date: Tue Sep 28 14:45:01 2010 +1000 Hax0r graphing to support telem/eeprom files commit e2b9f47a205348d38756c70e928a2a9183de6884 Merge: 7ef3ad0 8032031 Author: Anthony Towns Date: Tue Sep 28 12:55:47 2010 +1000 Merge branch 'master' of git://git.gag.com/fw/altos commit 803203197e51e71e9c77b3610047fd5bf9a56c56 Author: Keith Packard Date: Mon Sep 27 18:52:30 2010 -0700 altosui: Deal with eeprom dates going backwards across wrap eeprom timestamps can go backwards as the GPS time stamps are recorded when the first GPS character is received, but not placed into the eeprom log until the last GPS packet is complete. If this happens at the same time the tick count is wrapping, then the tick count will wrap backwards across the 0 boundary causing time to jump forwards. Fix this by letting time go backwards across the tick boundary, which requires that we know when the first 'real' tick is read from the eeprom file. Signed-off-by: Keith Packard commit fe7eba2e4af36cf29d8dc2378ac6985be04f68c6 Author: Keith Packard Date: Mon Sep 27 18:51:05 2010 -0700 altosui: .CSV output: add link quality, gps hdop and sat C/N0 numbers This makes the CSV files contain all of the available information. Signed-off-by: Keith Packard commit c89a34d1eb25155405b0036baeadc7bbfeade1c2 Author: Keith Packard Date: Mon Sep 27 17:11:48 2010 -0700 altosui: Create iterables for log file scanning. Split out display threads Convert from log file reading paradigm to using iterators which is more idiomatic for java. Split more code out of AltosUI.java, including the display update threads for telemetry monitoring and logfile replay.x Signed-off-by: Keith Packard commit 7ef3ad0c9354c0484c25badc69334b59c7f355e2 Merge: eb74866 e66919a Author: Anthony Towns Date: Fri Sep 24 10:28:06 2010 +1000 Merge branch 'master' of git://git.gag.com/fw/altos commit e66919aa46193bd8c7a1e86fb32a3367dae121f5 Author: Keith Packard Date: Thu Sep 23 16:52:51 2010 -0700 altosui: Require 4 sats for 'good' GPS data Wait for 10 consecutive GPS reports with at least 4 sats before reporting "GPS ready" state. Signed-off-by: Keith Packard commit 34ca8c00f4be72c314baff4c96f1e2f010948454 Author: Keith Packard Date: Mon Sep 20 06:30:49 2010 -0700 altosui: remove unused ReplayThread wrapper classes These aren't used now that the replay opener dialog knows how to build a reader from a filename. Signed-off-by: Keith Packard commit fd010661ced6075f82a961625826665a3d8d1efe Author: Keith Packard Date: Mon Aug 30 14:00:04 2010 -0700 altosui: Factor some UI elements into separate classes Clean up AltosUI by moving the two main tables to separate class files. Signed-off-by: Keith Packard commit eb74866e919e8c661153847871f5a79e66d37296 Merge: af404b4 1260589 Author: Anthony Towns Date: Mon Sep 20 22:05:26 2010 +1000 Merge branch 'master' of git://git.gag.com/fw/altos commit 1260589976c1a95848b298497fd251c4ee7d3f93 Author: Keith Packard Date: Sun Sep 19 02:52:29 2010 -0700 altosui: Write raw sensor data to .csv files For data export, provide the raw sensor samples instead of the filtered values. Signed-off-by: Keith Packard commit 7a4d7110debb88f4e906fee7c46f2badd561809d Author: Keith Packard Date: Sun Sep 19 02:50:43 2010 -0700 altosui: Use recorded ground acceleration when reading eeprom files The flight software records 1000 accelerometer samples and records that in the flight log. Use that value instead of using the very few samples recorded in the eeprom before boost is detected. This generates far more accurate accerometer data in the .csv files. Signed-off-by: Keith Packard commit af404b428bd742039afc25ff3850f76bc92c7c29 Author: Anthony Towns Date: Wed Sep 15 07:24:04 2010 +1000 Add JFreeChart to Makefile.am commit 61590b8729831cb138b2ba6b88802c208d114753 Author: Anthony Towns Date: Wed Sep 15 06:51:05 2010 +1000 Add graphing. commit 3d64f5a6511529ca53699190f4d54de1ba62a9bd Merge: ec6da08 b9623f8 Author: Anthony Towns Date: Sat Sep 11 15:15:14 2010 +1000 Merge branch 'master' of git://git.gag.com/fw/altos commit b9623f8ef26491e9fa14e2478295fe6f5cbbd87f Author: Keith Packard Date: Fri Sep 10 21:07:14 2010 -0700 altosui: Remember directory containing firmware files Instead of forcing the user to navigate to the firmware directory each time, this remembers the previous directory and starts there. Signed-off-by: Keith Packard commit 7f2204e0832b14b1edca4266a2cbc272141ecc2b Author: Keith Packard Date: Fri Sep 10 20:55:05 2010 -0700 altosui: set default .csv file name in file save dialog This uses setSelectedFile to specify which output filename to make the default in the save dialog. Signed-off-by: Keith Packard commit 7e053ae1f2d09347123ac9fa79e46645378b4c70 Author: Bdale Garbee Date: Fri Sep 10 10:42:35 2010 -0600 make the column headers comma separated, too, so they align with the data commit ec6da0824474e46de842845d7b53fe1a1dde33ed Merge: 7c2e411 1031067 Author: Anthony Towns Date: Fri Sep 10 16:11:34 2010 +1000 Merge branch 'master' of git://git.gag.com/fw/altos commit 10310672a83a66dc630718b151d653fc066f8e59 Author: Bdale Garbee Date: Fri Sep 10 00:09:25 2010 -0600 update changelogs for Debian build commit 9d0e89e8ad8926dc8371fa809835a580ae49711d Author: Keith Packard Date: Thu Sep 9 23:04:59 2010 -0700 altosui: Stop parsing eeprom file after hitting 'landed' state Sometimes there are additional records found in the eeprom file; the reader is mostly worried about not losing anything, so it reads as much as it can. However, the last record written for any flight is the 'landed' record, so we can stop looking at the file after hitting that. Signed-off-by: Keith Packard commit 67b6952f7126704478ede5575e5e938d18fcc329 Author: Keith Packard Date: Thu Sep 9 23:04:14 2010 -0700 altosui: Fill in time value of last Eeprom record read from file The last record is handled separately, and was missing the code to compute the time. Sigh. Signed-off-by: Keith Packard commit 8b0b584cd0ca7542e65aac0c7897ad7ab4115122 Author: Keith Packard Date: Thu Sep 9 22:55:47 2010 -0700 altosui: Remove debug printfs from AltosTelemetryReader Signed-off-by: Keith Packard commit a80bfae15f1499c49f7ef47978bf0337d8120892 Author: Bdale Garbee Date: Thu Sep 9 23:57:34 2010 -0600 rewind packaging changelog, again commit 78ce3120e5a53858ca0d43c734aa5d28b4948ce3 Author: Bdale Garbee Date: Thu Sep 9 23:52:20 2010 -0600 update changelogs for Debian build commit 71c85613a28c24c3aad7b4aa3299d8677ef1268e Author: Bdale Garbee Date: Thu Sep 9 23:51:23 2010 -0600 rewind packaging changelog commit 7c2e4114a3a43f919a7a6c967d3f16e5d630f90f Merge: ddc83b4 af200f5 Author: Anthony Towns Date: Fri Sep 10 15:50:01 2010 +1000 Merge branch 'master' of git://git.gag.com/fw/altos commit af200f5b84555de0556b52146379f3934774a3f3 Author: Keith Packard Date: Thu Sep 9 22:30:48 2010 -0700 altosui: Fix telemetry file reader to handle tick count wrapping The telemetry reader was ignoring tick count wrapping, so you'd see time go backwards in jumps. Not useful. Signed-off-by: Keith Packard commit 96ca7051f60ea299e3e05bafbe5717fc83c3afd2 Author: Bdale Garbee Date: Thu Sep 9 22:50:03 2010 -0600 update changelogs for Debian build commit 2d5e48c5dc0e822fdf430f43804c1e5e79fdbf84 Author: Keith Packard Date: Thu Sep 9 21:28:10 2010 -0700 Add --with-fat-dir configure option to publish finished stand-alone bits --with-fat-dir specifies a directory to copy the finished linux/macosx/windows stand-alone ("fat") packages to. A sub-directory will be created under the specified directory based on the product version number and the files copied there. Signed-off-by: Keith Packard commit dd2b77b2a516a055f29191dcdfeb727e637aae86 Author: Keith Packard Date: Thu Sep 9 20:59:29 2010 -0700 altosui: libaltos.so is built with libtool -- it's in ../libaltos/.libs It used to be in ../libaltos Signed-off-by: Keith Packard commit 72a5c1258db92d0ddd660bfa875e8e55cab47af7 Author: Keith Packard Date: Thu Sep 9 20:39:41 2010 -0700 altosui: Remove some debug printfs. Signed-off-by: Keith Packard commit 031fd9a954f2e3447d0150eb4ecc81af7b620dca Author: Keith Packard Date: Thu Sep 9 20:36:12 2010 -0700 Add firmware and libaltos to 'fat' target at top-level This ensures that all of the necessary bits are available to construct the distribution images. Signed-off-by: Keith Packard commit fcaa480b1dfeb2fd4044f9c4e1b6d50c46fc9984 Author: Bdale Garbee Date: Thu Sep 9 21:29:20 2010 -0600 update changelogs for Debian build commit 48f57997452e17564e28fe3e37403f6f63d32dea Author: Keith Packard Date: Thu Sep 9 20:24:42 2010 -0700 altosui: conflating USB product and vendor IDs is a bad idea We've now got a USB vendor ID called 'altusmetrum' for generic altusmetrum devices (old USB ID 0x000A) while the general vendor name for all devices is 'altusmetrum' as well. This patch splits vendors and products into separate name spaces, products are prefixed with product_ and vendor with (oddly) vendor_. Signed-off-by: Keith Packard commit 632d276118ab04de67561104be650f8fb69a0450 Author: Bdale Garbee Date: Thu Sep 9 20:34:43 2010 -0600 update changelogs for Debian build commit 1ac3d7e3ba52d1b0dc834eaa5d7886c730eaf307 Author: Bdale Garbee Date: Thu Sep 9 20:34:22 2010 -0600 initial cut at an altosui man page commit 5c4e437975054d33604402591e1ea2f314932593 Author: Bdale Garbee Date: Thu Sep 9 20:06:09 2010 -0600 update changelogs for Debian build commit 0ea75761416bff299233991e961ba25b6c7dcf89 Merge: 35d70c9 8ee3464 Author: Bdale Garbee Date: Thu Sep 9 20:05:27 2010 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 8ee3464d8064ebe1694c7b20177878c0d9961451 Author: Keith Packard Date: Thu Sep 9 17:54:41 2010 -0700 altosui: Display error dialog when AltOS JNI library can't be loaded Having an error dialog appear at application startup seems better than simply failing to present the device dialog later on. Signed-off-by: Keith Packard commit 4224a7526e51eb8fbf1f0a31bae7ee68c6385095 Author: Keith Packard Date: Thu Sep 9 17:52:46 2010 -0700 altosui: Store libaltos.so in $(libdir)/altos It's not a public library, so hide it away in a subdirectory. Signed-off-by: Keith Packard commit 1e4c18777d982061f5e507a4d4f4f1cd4d685268 Author: Keith Packard Date: Thu Sep 9 17:49:37 2010 -0700 altosui: Need to have JVM include path substituted into libaltos Makefile The libaltos Makefile needs to find the relevant jni.h file, which is found in the JVM_INCLUDE path, all nicely located by the configure.ac script. Signed-off-by: Keith Packard commit 35d70c92307dd478bc619b2f6c5a88e155cdad28 Author: Bdale Garbee Date: Thu Sep 9 17:27:07 2010 -0600 handle versioning of ihx files (poorly) by just wildcarding the file name, which assumes there's only one matching .. probably ok on Debian? commit c286ada6457579d64e9d8ca44b927258b4a561da Author: Bdale Garbee Date: Thu Sep 9 16:27:40 2010 -0600 update changelogs for Debian build commit 6c0ae7e966a81ece35bccbe89d626a58afe899a2 Author: Keith Packard Date: Thu Sep 9 15:25:18 2010 -0700 altosui: remove FATJAR from all-local to avoid building fat .jar file the fat .jar file is used in non-native builds to run from a directory containing all of the freetts jar files along with the altosui jar file. We don't want this on a real install where freetts is installed separately. Signed-off-by: Keith Packard commit 737a64c57a8f979f51c3fa6b3f214520c736cf8a Author: Keith Packard Date: Thu Sep 9 15:22:14 2010 -0700 altosui: hack to make JAVAROOT directory get created before javac runs This ensures that the JAVAROOT directory gets created by adding it to the variable used to set the CLASSPATH environment value. Signed-off-by: Keith Packard commit b456bd9d7bcd9d968e43c38eeb6fa6ad8c58f895 Author: Keith Packard Date: Thu Sep 9 15:11:41 2010 -0700 altosui: fix telemetrum.inf FFFE:000A product names on AMD64 and ia64 This appears to matter to Vista. Dunno why. Signed-off-by: Keith Packard commit 16980b848651a6b20a0b458446f0a19fb517539d Author: Keith Packard Date: Thu Sep 9 15:10:25 2010 -0700 altosui: Add explicit requirement to create classes directory The implicit ordering doesn't appear reliable. Signed-off-by: Keith Packard commit 15da683c2f747baef49c8b8d321a86faede0de30 Author: Bdale Garbee Date: Thu Sep 9 15:51:50 2010 -0600 update changelogs for Debian build commit 012e7176954a6b74b3b667317be0f6dc41d7ab70 Author: Bdale Garbee Date: Thu Sep 9 15:51:02 2010 -0600 add libtool to build deps commit 3e5824b9a71971ce99bfe38a1e860b421e265f02 Author: Bdale Garbee Date: Thu Sep 9 15:43:47 2010 -0600 update changelogs for Debian build commit ddc83b4c401be965a9947782becf20cc8c54e6a2 Merge: afea6c2 3d49d5f Author: Anthony Towns Date: Sun Sep 5 20:49:34 2010 +1000 Merge branch 'master' of git://git.gag.com/fw/altos commit 3d49d5f69b41c27003dbc5ccf1899014bd13bd99 Author: Keith Packard Date: Sun Sep 5 02:05:06 2010 -0700 altosui: ensure that 'altosui' script is installed. Pass arguments along. Signed-off-by: Keith Packard commit b61fec225ada6a9e252e4c7920101ee18c77cbdc Author: Keith Packard Date: Sun Sep 5 01:55:56 2010 -0700 altosui: eeprom files place 'boost' time in the flight number record. Instead of looking for the first state change record, use the Flight record to get the boost tick. Signed-off-by: Keith Packard commit 6c653a4cba5fef8d49261cf1c024f3e86e9058c6 Author: Keith Packard Date: Sun Sep 5 01:52:36 2010 -0700 altosui: Record flight number when scanning file, not when running The very first record in the eeprom is the flight number, but it is time-stamped with the 'boost' time, and so it gets sorted until much later, delaying the return of data until the rocket enters boost mode. This drops all of the nice pad GPS and state date on the floor. Signed-off-by: Keith Packard commit 38e1d87c8d449866faac026577fefa9a118428cb Author: Keith Packard Date: Sun Sep 5 01:23:53 2010 -0700 altosui: Use local .class files in the classpath This ensures that compiling only a few changed files will locate the old .class files instead of using a stale .jar file. commit 9941b05a1d03dafd6cd899b5fe999ed769efb1d6 Author: Keith Packard Date: Sun Sep 5 01:21:14 2010 -0700 altosui: Prevent voice altitude data from queueing up When flight status changes rapidly, the queue of voice data can get quite long. This change does two things -- first, it remembers when the altitude reporting happens due to flight events and delays the periodic reporting until a suitable time after that, second it ensures that the voice data has all been delivered before generating a new altitude report. Signed-off-by: Keith Packard commit 4dec5c36702d76dc95beada7c1d3222a638a2cbb Author: Keith Packard Date: Sun Sep 5 01:19:11 2010 -0700 altosui: Add AltosVoice.drain() to wait for queued speech to finish drain() blocks until all pending phrases have been processed, allowing the UI code to avoid pending data that will end up stale by the time it is emitted. Signed-off-by: Keith Packard commit 410ba89eef9c9817eef81b702966cb88820ff7c4 Author: Keith Packard Date: Sun Sep 5 01:13:01 2010 -0700 altosui: Start idle thread after the rocket leaves the pad This makes the first altitude report time consistently 10 seconds after launch, instead of some random time depending on when the rocket launched relative to the time the device connection was made. Signed-off-by: Keith Packard commit 6205547ec7191aab0259a8449520e966a96129e6 Author: Keith Packard Date: Sun Sep 5 01:08:50 2010 -0700 altosui: When replay thread is interrupted, don't make final report Normally, the replay process makes one final report after the file has been parsed. However, if the reading process is interrupted to display something else, this report is just annoying, so don't make it. Signed-off-by: Keith Packard commit 3d99584fcfe43b22e8581874e0ac77ce3d635d48 Author: Keith Packard Date: Sun Sep 5 01:03:18 2010 -0700 altosui: Add elevation and range data to main display Reported by voice, it's useful to see these on the display as well. Signed-off-by: Keith Packard commit 2d58f319a7c1a6a8ccc6a539722009996ba886ab Author: Keith Packard Date: Sun Sep 5 01:01:10 2010 -0700 altosui: Eeprom files contain only one date; save it. While reading eeprom files, the GPS record is reconstructed each time the system sees the first GPS log item (the time field), but as the date isn't repeated, we need to copy it from the old GPS data record. Signed-off-by: Keith Packard commit b2aa689bf3d61e4a3ebe7c828162d1be20aad0f6 Author: Keith Packard Date: Sun Sep 5 00:59:54 2010 -0700 altosui: Remove debugging printf from AltosEepromReader These were in place while validing the GPS data reconstruction code that handles eeprom files missing the first GPS date line due to the record overwriting bug in old firmware versions. Signed-off-by: Keith Packard commit eb0e7a59f0806734a4c959a3ce7c57f71cbe3986 Author: Keith Packard Date: Sun Sep 5 00:57:38 2010 -0700 altosui: Return AO_LOG_INVALID instead of exception for eeprom files When an eeprom file contains an invalid line, just return AO_LOG_INVALID instead of throwing an exception. This allows us to replay and parse files with extraneous serial communication. Signed-off-by: Keith Packard commit c3a17c71a45207dd715d537704f161de9219f0d7 Author: Keith Packard Date: Sat Sep 4 18:49:22 2010 -0700 altosui: Fix linux fat distribution Again, use 'cp -p' instead of 'cp -a' to get files into the archive instead of links. Also, make the shell script 'altosui' instead of 'altosui-fat'. Signed-off-by: Keith Packard commit 828e9e4c68e3ac90b6ba2e9fd5f131a9975f7e4a Author: Keith Packard Date: Sat Sep 4 18:39:58 2010 -0700 altosui: Fix up Mac OSX .zip file Must contain 'altosui.jar' instead of altosui-fat.jar. Also, was using 'cp -a' instead of 'cp -p' which made files represented by symlinks not end up in the archive. Signed-off-by: Keith Packard commit 044fd27449c70474f51b99dec25fd23d3c03a559 Author: Keith Packard Date: Sat Sep 4 18:20:45 2010 -0700 altosui: Fix windows installer to ship correct files Was shipping altosui.jar instead of altosui-fat.jar Signed-off-by: Keith Packard commit 148b927c3b8bc7b7b5c5356392032faf2b1203d3 Author: Keith Packard Date: Sat Sep 4 18:04:04 2010 -0700 Add top-level 'fat' target to aid building distribution files Signed-off-by: Keith Packard commit aed59e1c057c13e28fd368dc2592aa4628211097 Author: Keith Packard Date: Sat Sep 4 17:59:11 2010 -0700 Add version numbers to released files. Set version to 0.7.1 Instead of using git revision counts for version numbers, use explicit versions numbers configured in the configure.ac file. Expose published files with version numbers. Signed-off-by: Keith Packard commit 2808bba3efa1cff133cc060dabff06fab8b75388 Author: Keith Packard Date: Sat Sep 4 17:58:52 2010 -0700 Ignore libtool files. commit bc183400ab93d5902c52851319999cc77f27bc81 Author: Keith Packard Date: Sat Sep 4 17:35:17 2010 -0700 altos: add some SDCDB config files commit 887b11f6b9c81b9f15348d54017e700ca7dc5e55 Author: Keith Packard Date: Sat Sep 4 17:27:17 2010 -0700 Use autotools for altosui and libaltos This switches from hand-written Makefiles to automake with libtool for these parts of the system. Signed-off-by: Keith Packard commit e844e8a0695e27af6f8e3e37a5e3bcc865b862e3 Author: Keith Packard Date: Sat Sep 4 01:13:42 2010 -0700 altosui: Add icons to application and Windows menus. Use the altus-metrum icon for an application icon and a windows start menu/desktop icon. Signed-off-by: Keith Packard commit e9ea28504c646fc25791aab09b9e5faf73e0ac0c Author: Keith Packard Date: Sat Sep 4 01:08:34 2010 -0700 icon: add some icons for application programs altus-metrum.ico: Windows ICO file altus-metrum-16x16.jpg: 16x16 jpg image for java Signed-off-by: Keith Packard commit f550677df016070430ed38bfa2b2be33f1b8c40a Author: Keith Packard Date: Sat Sep 4 00:16:41 2010 -0700 altosui: oops. renamed the nsis file to altos-windows.nsi And forgot to change the dependency in the Makefile Signed-off-by: Keith Packard commit c0988ddbf104ea729090c2e7e2a28cc6dc9e90f6 Author: Keith Packard Date: Sat Sep 4 00:14:15 2010 -0700 altosui: ignore built files commit ecb4a09535b6a8da0765010489a96e605dbdeb46 Author: Keith Packard Date: Sat Sep 4 00:13:11 2010 -0700 altosui: Add windows installer build using 'nsis' nsis happens to be packaged in debian, and it appears to build usable installers, which is all very cool. Signed-off-by: Keith Packard commit bf22923cd8b4f6f954718358b411b5b10d8e7b4d Author: Bdale Garbee Date: Sat Sep 4 00:46:29 2010 -0400 update changelogs for Debian build commit 59798c6fd11502a9c8b66090c23ba50eb250692e Author: Keith Packard Date: Fri Sep 3 12:43:45 2010 -0700 altosui: Catch I/O errors on telemetry device, report to user This catches the USB device being unplugged and makes sure the user sees an error dialog in this case. Signed-off-by: Keith Packard commit 16d8d6a8853d09f683b13f9cda3c3174a0aab130 Author: Keith Packard Date: Fri Sep 3 12:31:05 2010 -0700 altosui: Must flush serial line after configuring for telemetry Without flushing the configuration commands to the serial device, it never sees them as the telemetry input thread doesn't flush. Signed-off-by: Keith Packard commit d4f64e95e31e2335470efc15df2ab357b7d197f3 Author: Keith Packard Date: Fri Sep 3 11:48:55 2010 -0700 Revert "altosui: Deal with altos bug setting radio channel while monitoring" This reverts commit ba65e4aeb952a1cf49a77f1e24e235508fcea71f. Testing the old code commit 71191ecef3ba0e00d0f8a7cd1a24982bfa44ec72 Author: Keith Packard Date: Fri Sep 3 01:30:33 2010 -0700 altosui: Allow 'connect to device' when already connected Opening another serial device involves shutting down the display thread (to reset its state) and spawning another one. Shutting down the display thread normally closes the serial device as a part of the process, and if this isn't done before the new serial device is opened, then the new serial device ends up getting closed too. Interrupting the display thread and waiting for it to stop before opening the new serial device solves the problem. Signed-off-by: Keith Packard commit ba65e4aeb952a1cf49a77f1e24e235508fcea71f Author: Keith Packard Date: Fri Sep 3 01:21:57 2010 -0700 altosui: Deal with altos bug setting radio channel while monitoring If the monitoring thread is active, then setting the radio channel can sometimes cause the monitoring thread to get stuck. I'm not entirely sure why though. For now, work around the issue by making sure monitoring is off, and the monitoring thread has stopped, before changing the radio channel. Signed-off-by: Keith Packard commit e5ef42c2b22c6639d90631dbbb588f9fd2494385 Author: Keith Packard Date: Fri Sep 3 01:12:24 2010 -0700 altosui: Report telemetry CRC errors in UI Telemetry CRC errors can signal problems with TeleMetrum or TeleDongle units, so report them in the UI. Signed-off-by: Keith Packard commit 3b3aa448f3a0f44137f7530b04b58967ba5f22f5 Author: Keith Packard Date: Thu Sep 2 21:11:29 2010 -0700 altosui: build Mac OS .zip file to include paths Without the paths, the OS X zip file doesn't create a usable application structure. Signed-off-by: Keith Packard commit cff0d1ef6b338b3d5ad9450d4d5f95df934cb5e4 Author: Keith Packard Date: Wed Sep 1 22:56:34 2010 -0700 altosui: Post error dialog on invalid ROM config values. Signed-off-by: Keith Packard commit 8d8980f56a4f2c7d6f2ce667130706e0f04f8ded Author: Keith Packard Date: Wed Sep 1 22:56:12 2010 -0700 altosui: Remove some debug printfs from AltosRomconfig class Signed-off-by: Keith Packard commit 5ee6cd41ed189c3166f76558ecada80917f40652 Author: Keith Packard Date: Wed Sep 1 22:47:15 2010 -0700 altosui: Hide internal rom config UI helper function This was getting mis-used by the flash UI causing the rom dialog 'cancel' button to work just like 'ok'. Signed-off-by: Keith Packard commit 9a690c9795e8257d2a3225f905117681668a472f Author: Keith Packard Date: Wed Sep 1 22:46:04 2010 -0700 altosui: allow flashing to be canceled from the rom config dialog Was using the rom config class wrong, causing cancel actions to work just like 'ok' actions. Oops. Signed-off-by: Keith Packard commit 2f07ad14a16dbf1b75c71784ceae303825c90ade Author: Keith Packard Date: Wed Sep 1 22:43:22 2010 -0700 altosui: Abort flashing if debug port isn't working Check each command going over the debug port and make sure it works as expected. This commit adds checks for initializing the clock, selecting the desired program counter and running the flash program. Signed-off-by: Keith Packard commit cf30343aadd5039627a85319872685f743e64b16 Author: Bdale Garbee Date: Thu Sep 2 00:55:41 2010 -0400 update changelogs for Debian build commit 59a40f6d5a2159b9009a3fa0737bb679efd5b32c Author: Bdale Garbee Date: Thu Sep 2 00:55:01 2010 -0400 another distclean fix commit 59ff9180f11063c257746b895a167179b3a4ff7c Author: Bdale Garbee Date: Thu Sep 2 00:53:16 2010 -0400 and a few more distclean fixes commit 3aafd70257b70b7c11ba9c55749157979bc61ea2 Author: Bdale Garbee Date: Thu Sep 2 00:52:04 2010 -0400 more makefile distclean target work commit d5a6ad87c7a9ac03b2e694bed0a54b6cc4322a6f Author: Bdale Garbee Date: Thu Sep 2 00:50:16 2010 -0400 update changelogs for Debian build commit 14fa24ed93b3b1cec08a170004c6fb7f4d74f7e5 Author: Bdale Garbee Date: Thu Sep 2 00:48:31 2010 -0400 update changelogs for Debian build commit 83552dfa0d38db9cdf3efc89e64e6c7896467856 Author: Bdale Garbee Date: Thu Sep 2 00:47:54 2010 -0400 add distclean targets to libaltos and altosui to all Debian package to build commit 6f24d2a476759104a10b26b54faff2b18b0e208b Author: Bdale Garbee Date: Thu Sep 2 00:46:21 2010 -0400 update changelogs for Debian build commit d079bfe86ed40ff450ece445cf5f5e3970e44cec Author: Bdale Garbee Date: Thu Sep 2 00:44:30 2010 -0400 update changelogs for Debian build commit a470315e5d822a69ef5304512cf73c604c88e481 Author: Keith Packard Date: Wed Sep 1 20:14:51 2010 -0700 altosui: Remove Manifest.txt from git repo as it's built now This file is built with appropriate contents for each different .jar file. Signed-off-by: Keith Packard commit 1177e0a684328422be5adc68093d0091a218a824 Author: Keith Packard Date: Wed Sep 1 19:53:24 2010 -0700 altos: Bounds check Skytraq GPS tracking data array Missing GPS serial data could cause the tracking array reset to get skipped, causing the array to be overrun, smashing critical data beyond the array. This was detected using the 'altosui' flash command to program a device from TM. Hitting the USB that hard caused TM to crash with a mutex error (3 beeps) after the ao_gps_task structure was overwritten with zeros. Signed-off-by: Keith Packard commit 775acb89660cdee2f3c54c38297baefe39f2414c Author: Keith Packard Date: Mon Aug 30 22:24:09 2010 -0700 altosui: missed AltosReader.class in the Makefile This caused clean builds to fail to make this file Signed-off-by: Keith Packard commit bd2b9d958c2b7f846031b076ed51c4fbaaf2d68f Author: Bdale Garbee Date: Tue Aug 31 00:20:06 2010 -0400 update changelogs for Debian build commit d006c5e1255433181aca4c8e6a277b2d1bc0841b Author: Bdale Garbee Date: Tue Aug 31 00:19:37 2010 -0400 add runtime dependencies for altos binary package commit c1c7d731e3774883fa0bb5538be225a59334d124 Author: Bdale Garbee Date: Mon Aug 30 19:52:51 2010 -0600 update changelogs for Debian build commit c35632efb1919764e4b8581ed6fcf2bedd4bd517 Author: Bdale Garbee Date: Mon Aug 30 19:37:50 2010 -0600 update changelogs for Debian build commit 2a004d17a13b4ff52d892bfdecff8ad3d0823f7c Author: Bdale Garbee Date: Mon Aug 30 19:37:17 2010 -0600 don't build all the "fat" jar deliverables by default commit 507e429db6638f82c32449e9c5ca06b46da30134 Author: Bdale Garbee Date: Mon Aug 30 19:09:00 2010 -0600 update changelogs for Debian build commit 25764fcd1b65c3a5a817afdb5901ac30e8a5f0c0 Author: Bdale Garbee Date: Mon Aug 30 19:08:29 2010 -0600 update changelogs for Debian build commit 4790f78aead8a816e5b247c022b2998ce3a94053 Author: Bdale Garbee Date: Mon Aug 30 18:48:50 2010 -0600 add a .gitattributes file, configuring the Mac and Windows binary library files with the export-ignore attribute, in hopes that this will prevent them showing up in source packages commit 81318e5b7179b0311ab099043ecb04a25d763750 Author: Bdale Garbee Date: Mon Aug 30 18:15:40 2010 -0600 make invocation of 'install' pathless to work on more Unix variants commit cbc72399a0f4d7429df0189bcdae683dd491cb9e Author: Bdale Garbee Date: Mon Aug 30 17:56:56 2010 -0600 continue even if rm's don't have anything to do commit a9a8d23c877e6f6c76857b7c85e3d43b4da1db27 Author: Keith Packard Date: Mon Aug 30 05:49:11 2010 -0700 altosui: Devices with USB id 0x000a always get listed List 'unknown' AltusMetrum devices anytime the UI needs a device name. Signed-off-by: Keith Packard commit a94900b8862b99b4e317ea0ee3edd2a560f270c7 Author: Keith Packard Date: Mon Aug 30 05:48:23 2010 -0700 altosui: build debian-style altosui too This adds the dependencies to make sure altosui and altosui.jar get built. Signed-off-by: Keith Packard commit 38ac388baf8125c0644b868a7aaf8eba1bdf990d Author: Keith Packard Date: Mon Aug 30 05:28:37 2010 -0700 altosui: Build linux, mac and windows archives on Linux This adds 'fat' archives for each target OS. Signed-off-by: Keith Packard commit 35d9a8214252dbe79aeb69ae47d2e5c58a654702 Author: Keith Packard Date: Mon Aug 30 05:27:45 2010 -0700 libaltos: Use overlapped I/O on windows Otherwise, reads block writes and vice-versa. Crazy stuff. Signed-off-by: Keith Packard commit c7ba92317ac55272acbde12416448ebd17b983a6 Author: Keith Packard Date: Mon Aug 30 04:52:00 2010 -0700 altos: Windows sends USB Out packets of 0 length. Ack them. This was an untested case as no other operating system sents 0-length out packets (they're not necessary). The correct response is to ACK them by clearing the OUTPKT_RDY bit so that another packet can be sent. Signed-off-by: Keith Packard commit 20a472cfe3369200150ea4ff067ceb28968dbcac Author: Keith Packard Date: Mon Aug 30 02:58:23 2010 -0700 libaltos: Add pre-built Windows .dll This lets us create the windows distribution on Linux. Signed-off-by: Keith Packard commit 0300fe581c949232bc52b05fe9c1f6032cad6b60 Author: Keith Packard Date: Mon Aug 30 02:56:25 2010 -0700 libaltos: Add pre-built Mac OS X libaltos.dylib This allows the mac bits to be built on Linux. Signed-off-by: Keith Packard commit 5d48c494325524bbeed10e0dc7300ed44e7e208e Author: Keith Packard Date: Mon Aug 30 02:53:26 2010 -0700 Update telemetrum.inf to include all current USB ids. Windows 7 has 'encouraged' us to split out each product into a separate USB ID. telemetrum.inf now has all of them listed. Signed-off-by: Keith Packard commit df34bbe7d1c43b12ab6d610fe810b6e1683e4c21 Author: Keith Packard Date: Mon Aug 30 02:49:49 2010 -0700 libaltos: Improve Makefile Builds Windows .dll correctly now and sample app. Moves linux install target to end so it is not default Adds .NOTPARALLEL to disable parallel gnumake. Removes -g debugging flags to shrink file size. Signed-off-by: Keith Packard commit dd5374b8e660012ae4f8b058454fd101e0749ca7 Author: Keith Packard Date: Mon Aug 30 02:00:30 2010 -0700 libaltos: Fix windows build. Need stdlib.h to get calloc/free defined, remove debug printfs, fix serial timeouts. Signed-off-by: Keith Packard commit 63c832394a829f41b8f77d075786530536360349 Author: Keith Packard Date: Sun Aug 29 23:22:27 2010 -0700 altos: shut down packet mode cleanly Instead of constantly bashing the packet master thread, let it shut itself down in an orderly fashion. It will shut down fairly quickly as all of the activities in that thread are bounded. Otherwise, the master packet thread might leave mutexes locked and all sorts of other horrors. Tested on Linux and Mac OS X and shown to be reliable. Signed-off-by: Keith Packard commit 43619c13f749b79c096d1e8fdab3d5cfb5fd85f1 Author: Keith Packard Date: Sun Aug 29 22:42:23 2010 -0700 altos: Abort radio harder when terminating packet mode. Make sure the master radio tasks don't get stuck waiting for an incoming packet again by aborting the radio each time we poke the tasks. Signed-off-by: Keith Packard commit c4a8569f61eddf690d00337543462235ecbfbe54 Author: Keith Packard Date: Sun Aug 29 22:41:18 2010 -0700 altos: flush pending output when terminating packet mode Just in case the last command sent hasn't been transmitted, hang around for up to a second waiting for the data to get across the link. Signed-off-by: Keith Packard commit 1acd3c7ec167b1b18e4ea493e5978c938a91cc89 Author: Keith Packard Date: Sun Aug 29 21:45:19 2010 -0700 libaltos: cjnitest needs altos_flush now commit 6527357d1f0e94faf9e7dacac10a39875131be7c Author: Keith Packard Date: Sun Aug 29 21:43:46 2010 -0700 libaltos: Missing OS_LDFLAGS on cjnitest build commit b7fa1ea3338f63b8edcf8aacccb5e519ca0b213f Author: Keith Packard Date: Sun Aug 29 21:41:40 2010 -0700 libaltos: Mac OS X cannot use 'poll(2)' on serial lines. Who ships this stuff, anyway? Instead of blocking, we'll poll every 100ms now, otherwise, we won't be able to abort the read when the device is closed. Yay! Signed-off-by: Keith Packard commit e60c59123232915e808cee23ef89eb1a38ced34b Author: Keith Packard Date: Sun Aug 29 21:40:21 2010 -0700 altosui: discard invalid lines while reading Eeprom flight data This shouldn't happen, but it's easy enough to get back in sync by just skipping lines with weird contents. Signed-off-by: Keith Packard commit ae02b1590439d5c8dfb472cf1f83a14fdcfbaf11 Author: Keith Packard Date: Sun Aug 29 21:36:47 2010 -0700 altosui: provide separate flush_input/flush_output for serial. deal with monitor automatically (yes, this should be two patches, but the diffs in AltosSerial were merged together). First, this replaces the existing flush/flush_reply mess with two simple functions, one to flush output to the serial device, making sure that all data written will be seen while we wait for input. The other sucks any pending input off of the serial line and discards it. Second, AltosSerial now tracks whether the serial line is being used for telemetry monitoring. If so, it enables monitoring, otherwise it disables it. Eliminates a bunch of manual state tracking elsewhere. Signed-off-by: Keith Packard commit edcfb1bdf64772d3b83405ccf99385b8fea5d8e4 Author: Keith Packard Date: Sun Aug 29 17:33:59 2010 -0700 libaltos: AltusMetrum devices use more than one USB ID. List all usb devices, picking those with AltusMetrum IDs. Signed-off-by: Keith Packard commit 236685807b63860ad033aa0254ce8f6d8d36d4ef Author: Bdale Garbee Date: Fri Aug 27 22:26:09 2010 -0600 update changelogs for Debian build commit 1cda15fdef2d9d3e54354bd5c43a0bcc7e3240cb Author: Bdale Garbee Date: Fri Aug 27 22:24:51 2010 -0600 fix up for an 0.7 release commit 4c5c7c7f198775c398c1ad2edafb3488384cc297 Author: Bdale Garbee Date: Fri Aug 27 22:13:38 2010 -0600 update changelogs for Debian build commit 42055af5c6f17d14a2f1c6a2b5e1ce6d3b45a615 Author: Bdale Garbee Date: Fri Aug 27 13:13:19 2010 -0600 update changelogs for Debian build commit 0bd4cc03b3bf23aa32b5ce1921078021d1d8a9c6 Author: Bdale Garbee Date: Fri Aug 27 13:12:46 2010 -0600 fix path to installed shared library commit 99c1d9b4ef10ec4ebbee058ce0bb38c954a0a3a6 Author: Bdale Garbee Date: Fri Aug 27 12:41:26 2010 -0600 update changelogs for Debian build commit cf65c6b8056c4af7c26b52ec6f9fbd3400cef638 Merge: 5f2f6a8 ae5eff7 Author: Bdale Garbee Date: Fri Aug 27 12:38:25 2010 -0600 Merge branch 'bdale' Conflicts: debian/control commit ae5eff7bc0b63047737223423009707bedcb00f5 Author: Bdale Garbee Date: Fri Aug 27 12:37:36 2010 -0600 Revert "lose the prebuild hook for now while I'm fumbling" This reverts commit a21b6bb60ac1c07ebd161534a4ea63bfde50dcdf. commit de2e71c4923a0282df74dbe37d087c34b4ddd279 Author: Bdale Garbee Date: Fri Aug 27 12:25:20 2010 -0600 fix man page delivery path commit a8dbe082960dc9bdd44c6e4b1198423c4e566029 Author: Bdale Garbee Date: Fri Aug 27 12:18:28 2010 -0600 install altosui man page commit 5cc933039e4763b8675611c63b6147b42878a2bb Author: Bdale Garbee Date: Fri Aug 27 12:16:19 2010 -0600 fix permissions on installed jar file, switch from ao-view to altosui in the desktop file commit 138009e9fad01f79df4c3820fbc206f78688bdce Author: Bdale Garbee Date: Fri Aug 27 12:06:01 2010 -0600 update Debian standards version commit c280071b7db4e9a7af31dc5740eb8d27f137950e Author: Bdale Garbee Date: Fri Aug 27 12:04:13 2010 -0600 fix up the wrapper's path to the jar file commit 5f2f6a8f9ba56be867888758848bc7f152ccbd47 Merge: 63bd34c 9d1b27f Author: Keith Packard Date: Fri Aug 27 11:00:31 2010 -0700 Merge remote branch 'origin/master' into new-packet-format commit 63bd34cd1b5a411489e8c3ab377f0fe0eec11f67 Author: Keith Packard Date: Fri Aug 27 10:58:55 2010 -0700 altosui: add elevation and range information Signed-off-by: Keith Packard commit 72a18502e40f55cbba6418dc94315517881cd411 Author: Bdale Garbee Date: Fri Aug 27 11:51:24 2010 -0600 add an install target for altosui commit 72c33a72ee105ec692dad62d6d9c1ad40b89bfe8 Author: Bdale Garbee Date: Fri Aug 27 11:45:19 2010 -0600 add install target for libaltos commit a21b6bb60ac1c07ebd161534a4ea63bfde50dcdf Author: Bdale Garbee Date: Fri Aug 27 11:26:29 2010 -0600 lose the prebuild hook for now while I'm fumbling commit 9ea94411c9730f7a271366d309ab4827beeeb839 Author: Bdale Garbee Date: Fri Aug 27 11:17:54 2010 -0600 add a dummy install target commit c443f43f8dee6e0fcbcecf9d09e948fd928b7af4 Merge: 2950431 2923cf5 Author: Bdale Garbee Date: Fri Aug 27 03:08:53 2010 -0600 Merge branch 'new-packet-format' of ssh://git.gag.com/scm/git/fw/altos into new-package-format commit 2923cf5057f9cef110dd547d8677ea5b60e00796 Author: Keith Packard Date: Fri Aug 27 00:10:29 2010 -0700 altos: prepare for sdcc 2.9.1 A few minor language changes -- non-standard keywords are now prefixed with __, such as 'at', 'interrupt', 'naked'. Signed-off-by: Keith Packard commit 68967157cee620ebedcc8c2ffd6fc7656532087b Author: Keith Packard Date: Thu Aug 26 23:55:44 2010 -0700 altosui: command line args are converted to csv format Signed-off-by: Keith Packard commit 7e0506dc2014b7178f52b950e8c1cb820b35f9c6 Author: Keith Packard Date: Thu Aug 26 23:54:53 2010 -0700 altosui: Remove debug printf from AltosState.java Signed-off-by: Keith Packard commit 49364608b59de7421ab00d87d2685bc3b5f58411 Author: Keith Packard Date: Thu Aug 26 23:53:06 2010 -0700 altosui: When parsing saved telem files, errors shouldn't abort file Make syntax errors in telem files just skip the current line and move on to the next one instead of abandoning the whole file. Signed-off-by: Keith Packard commit a16db143fc7ca72dc91e7989420049192114642d Author: Keith Packard Date: Thu Aug 26 23:50:51 2010 -0700 altosui: Serial line is in UTF-8 encoding. Deal with it. We read bytes from the serial line and need to convert each line into a string. So, save the bytes and at EOL, pass the whole mess to the string constructor with the appropriate encoding info. Signed-off-by: Keith Packard commit 0942912163255523d923140c01afbdb5da1c19b5 Author: Keith Packard Date: Thu Aug 26 23:49:37 2010 -0700 altosui: Add support for old (version < 3) telemetry files This lets the code read telemetry files from pre-released versions of the software. Not strictly necessary for production, but useful for analysing old files. Signed-off-by: Keith Packard commit e383595cd281687de903fb6176564bbef270cb83 Author: Keith Packard Date: Thu Aug 26 23:47:38 2010 -0700 altosui: AltosEepromReader was mis-setting boost tick It was supposed to use record.tick instead of the (unset) state.tick value. Signed-off-by: Keith Packard commit 651f6102ac79459fc8d5679d852c963dcb5bb3fc Author: Keith Packard Date: Thu Aug 26 23:44:25 2010 -0700 altosui: add rssi and distance/dir from pad to CSV files Just adds a couple more fields to the CSV files that might be interesting. Signed-off-by: Keith Packard commit 3dc67c1401976d6e9e2e942d5a4707a4810a0404 Author: Keith Packard Date: Thu Aug 26 23:43:00 2010 -0700 altosui: Add AltosGreatCircle constructors This adds constructurs from AltosGPS pairs and also one from empty args (which defines both distance and bearing as 0). Signed-off-by: Keith Packard commit f0fd423d0bf83bc5c3f9d39e9c09397fbe8caed2 Author: Keith Packard Date: Thu Aug 26 23:41:26 2010 -0700 altosui: Move number parsing code to Altos general class This moves these shared functions to the global shared class. Signed-off-by: Keith Packard commit 68b2b66d7574dfd0bd5e3571b8ffad32ca5d2b73 Author: Keith Packard Date: Thu Aug 26 23:37:29 2010 -0700 altos: mark gps date written only after it gets into eeprom Data logging doesn't start until boost detect occurs. As the GPS date is only logged once, if that happens before logging is written to the flash, then the GPS date will never get saved. Signed-off-by: Keith Packard commit aa6c27df5db6bdae59d00affccb891854a6caa18 Author: Keith Packard Date: Thu Aug 26 15:59:09 2010 -0700 altos: print GPS state flags in GPS 'g' command Having the GPS state information can help with GPS debugging. Signed-off-by: Keith Packard commit 34055129b4008f6a9833887b12dee39ffa408002 Author: Keith Packard Date: Thu Aug 26 15:57:09 2010 -0700 altos: always rebuild ao_product.c to track git version The git version is built into ao_product.c and saved in eeprom log files, providing useful diagnostics about the firmware revision used for each flight. However, if ao_product.c isn't recompiled, then the updated version won't be included. Force recompilation of this file each time make is run to ensure that the final output contains an updated version number. Signed-off-by: Keith Packard commit 99400fdc0f19ef538fc362dde5c3ab5b7cdac409 Author: Keith Packard Date: Tue Aug 24 16:43:38 2010 -0700 altosui: flush replies from serial link when entering debug mode We use replies in debug mode a lot and depend on them matching the expected parameters. The case which caused trouble was using TeleMetrum to reprogram TeleDongle -- sending the 'm 0' command (to disable telemetry monitoring on TeleDongle) to the TeleMetrum caused it to reply 'Syntax Error' which confused the subsequent flashing operation. Flushing that reply gets things back in sync. Signed-off-by: Keith Packard commit ba086cc77273efe5397f60dcaccd1e3771441481 Author: Keith Packard Date: Tue Aug 24 04:02:27 2010 -0700 altosui: write USB serial number string while flashing USB serial number is encoded in UCS2 as a part of the string descriptors. Place those right after the other rom config bits so that altosui can find it. altosui is changed to write the serial number there. Signed-off-by: Keith Packard commit 220f3afdaa432c65f8ad45be7cdbe5c8a3616db3 Author: Keith Packard Date: Tue Aug 24 04:01:47 2010 -0700 altosui: always display romconfig ui while flashing commit f62b2aa08ebfd912b3c732397d43ff9f6162ec88 Author: Keith Packard Date: Tue Aug 24 04:01:14 2010 -0700 altosui: fetch existing romconfig for flashing commit d93787284c8e514a929edb9f944c98ae0206a33f Author: Keith Packard Date: Tue Aug 24 03:59:09 2010 -0700 altosui: Delay mapping Flash UI until flashing actually starts The flash operation may be abandoned before it even starts; this makes sure the UI doesn't flash up on the screen. Signed-off-by: Keith Packard commit 7d44cbd621d2b113ac2b802ef17e3d8a660ce7f2 Author: Keith Packard Date: Tue Aug 24 03:58:00 2010 -0700 altosui: disable radio monitoring while using serial line for debugging commit 7bd220dfd9b3fb0e42eb90c3b37eb7b4169eb21b Author: Keith Packard Date: Tue Aug 24 00:29:11 2010 -0700 altosui: Add ability to create CSV file from telem or eeprom files This creates a comma separated value file to export data for external programs. Signed-off-by: Keith Packard commit 634a550149e7c344a22a637ba484f115592b1018 Author: Keith Packard Date: Mon Aug 23 23:15:05 2010 -0700 altosui: refactor logfile chooser dialog to share more code Move file opening logic into logfile chooser as it can be shared that way. Signed-off-by: Keith Packard commit afea6c264c5ebf12f1d629bd4bc724da86d11b7a Merge: 0e17853 9d1b27f Author: Anthony Towns Date: Tue Aug 24 00:02:31 2010 -0600 Merge branch 'master' of git://git.gag.com/fw/altos commit a55b132668a819cc26478a609cb79bd9190deb9d Author: Keith Packard Date: Mon Aug 23 23:01:36 2010 -0700 altosui: Separate out log file choosing dialog to share with CSV generator This dialog will be shared with the CSV file generating code, so split it out instead of duplicating it. Signed-off-by: Keith Packard commit 295043112ccde35092945c286596f9045ee6fa05 Merge: 2007288 ef8376c Author: Bdale Garbee Date: Mon Aug 23 23:11:22 2010 -0600 Merge branch 'new-packet-format' of ssh://git.gag.com/scm/git/fw/altos into new-package-format commit ef8376c4dd8262a34e02b6bb9e19e907ac2f4330 Author: Keith Packard Date: Mon Aug 23 22:08:30 2010 -0700 altosui: make default Manifest look for built-in freetts commit 56b906f535ac2f86bcab71addbbcd376d74f6a73 Author: Keith Packard Date: Mon Aug 23 22:03:36 2010 -0700 altos: Place rom config variables in fixed location The device serial number and radio calibration values are stored in flash, mostly so that TeleDongle gets them saved. Placing them in well-known locations (starting at 0xa0) makes it possible to find the previous configuration and to re-write it easily, without requiring the .map file. altosui doesn't have the .map file parsing code, so it relies upon this new technique. As a benefit, it reads the old values from the device before reprogramming it. Signed-off-by: Keith Packard commit 4c0c099716197ef7539be0cf55bbb164f6804958 Author: Keith Packard Date: Mon Aug 23 22:02:21 2010 -0700 altosui: Finish device programming code Altosui can now reprogram Altusmetrum devices. Signed-off-by: Keith Packard commit bd2b44ddd61fadd8bf8ee6bf783ce019b1be7cc0 Author: Keith Packard Date: Mon Aug 23 22:01:38 2010 -0700 altosui: Remove debug printf from AltosRomconfig commit c3f57ffdb6c74de90d982eacd604e658ce9b00a5 Author: Keith Packard Date: Mon Aug 23 22:01:11 2010 -0700 altosui: flush serial output before waiting for reply commit 8857ac5e43eac6db8d5594b8864df497a712242b Author: Keith Packard Date: Mon Aug 23 22:00:16 2010 -0700 altosui: remove debug printf from AltosHexfile commit b1758be01397fd49c441f40852f3558fe9343a2d Author: Keith Packard Date: Mon Aug 23 21:58:50 2010 -0700 altosui: Add lots more cc1111 debug interface functions These are sufficient to program the flash. Signed-off-by: Keith Packard commit f9e80f39bc39e5882bfe75f959b6501cb3277cd2 Author: Keith Packard Date: Mon Aug 23 21:55:49 2010 -0700 libaltos: use pipe to wake up getchar on close. use mutexes commit 86f7b9314b042f2e512fdf35067817e68532867b Author: Keith Packard Date: Mon Aug 23 21:54:47 2010 -0700 altosui: pad TM config dialog values to avoid clipping descenders commit b8519b8669ff54741dd738ac343fbd2424451247 Author: Keith Packard Date: Mon Aug 23 21:53:37 2010 -0700 ao-dumplog: Fix --remote and --channel options to actually work commit ebeb13688a9a5442c838641ede6ba0dc92c9a1a4 Author: Keith Packard Date: Mon Aug 23 14:32:58 2010 -0700 altosui: Add debug dongle API, split flash UI out Create an API to talk through the debug port on another AltOS device. Split the flash UI out from the flash implementation so that a command line flash utility can be written. Signed-off-by: Keith Packard commit 7f8d7978606abe544b1b9b6065c5480ed813b8ec Author: Keith Packard Date: Mon Aug 23 11:53:19 2010 -0700 altosui: Add .ihx file reading code and stub out flashing UI Signed-off-by: Keith Packard commit 2007288da8a83e3aa925e11cc196f1c65aab2e5c Author: Bdale Garbee Date: Thu Aug 5 15:00:15 2010 -0400 working on java packaging details commit 44b26dd550eef789e70082ccaa46d7d430c67bce Author: Bdale Garbee Date: Thu Aug 5 15:15:04 2010 -0400 add freetts as a build dep commit 0e17853c08f77debef3e8cf82e9cdb6a5079fc9b Author: Keith Packard Date: Sun Aug 22 23:06:15 2010 -0700 altosui: Set callsign when fetching eeprom data over the air The updated firmware places the callsign in each packet to comply with regulations, this ensures that TeleDongle has the current callsign configured. Signed-off-by: Keith Packard commit 953bc3438b10b21f3d65d292356c4ab2de23cddd Author: Keith Packard Date: Sun Aug 22 23:05:20 2010 -0700 altosui: Add TeleMetrum configuration This presents a dialog with all of the user-settable options in the TeleMetrum set for editing. Combo boxes are used for everything except the callsign. Signed-off-by: Keith Packard commit e1463d8e265dfd42c824d90088cd2a51b4cf8131 Author: Keith Packard Date: Sat Aug 21 17:57:31 2010 -0700 altosui: Make teledongle callsign configurable Teledongle uses the callsign in packet mode; this provides a way to set that. Signed-off-by: Keith Packard commit 09252ec22d58e946494e4ca2cf367bf3bbe1cc50 Author: Keith Packard Date: Sat Aug 21 17:09:41 2010 -0700 altos: Define USB product ID in per-product Makefile.defs file This allows Win7 to tell which kind of device is connected purely by USB id as it doesn't expose the USB product ID string to user space. Signed-off-by: Keith Packard commit 22800dc094797e1e0ad99124198809d0360f7556 Author: Keith Packard Date: Tue Aug 17 18:22:28 2010 -0700 altosui: Select devices by USB vendor/product ID. Because Win7 doesn't expose the product name, we're swtiching to using the USB idProduct/idVendor values. This patch adds support for selecting devices by those new IDs. Signed-off-by: Keith Packard commit d14c96663a1027164fa30ed89b53f5a9d3fdb82b Author: Keith Packard Date: Tue Aug 17 18:19:43 2010 -0700 libaltos: integrate Windows support. This adds Windows support for discovery and I/O. The API to the library is mostly unchanged, except that it now exports product and vendor USB IDs as Win7 doesn't expose the product name anywhere that we've been able to find, so we'll be updating the firmware to use unique idProduct values for each product. Signed-off-by: Keith Packard commit 9d1b27fa147fc8b765d5be165ebef7ee0f85bd37 Author: Bdale Garbee Date: Wed Aug 11 22:11:50 2010 -0400 update changelogs for Debian build commit b6da90b4627dde1fe88240c38c51559d8f781dd0 Author: Bdale Garbee Date: Wed Aug 11 17:15:39 2010 -0400 update changelogs for Debian build commit 4918f73fd0a0f3f5d52907f95a0ec385e901d447 Author: Bdale Garbee Date: Wed Aug 11 08:50:27 2010 -0400 update changelogs for Debian build commit f63f16a70e4d0535667a6364cafcbff026ee6a8c Author: Bdale Garbee Date: Wed Aug 11 08:36:59 2010 -0400 update changelogs for Debian build commit 294d9c7db21eaf1e71504dbcca5040371abcce55 Author: Keith Packard Date: Sat Aug 7 22:30:55 2010 -0400 ao-dumplog: add --channel option (for use with -R option) Sets the channel when downloading data with the -R option. Signed-off-by: Keith Packard commit f317f1324b69b4241f4bb192e164b33d712d5a43 Author: Keith Packard Date: Sat Aug 7 00:42:25 2010 -0400 altosui: Start adding code to write csv files from eeprom/telem files This is a start to code which can write out a csv file full of flight data from either an eeprom or telem input file. It's not hooked up, but the restructuring necessary is finished and the output is started. Signed-off-by: Keith Packard commit 4738cb2fc639adb1d9237e6c903479f0690dd81a Author: Keith Packard Date: Sat Aug 7 00:40:59 2010 -0400 altos: add callsign to packet mode, increase payload to 64 bytes Untested, but it 'should' work. Need to add callsign setting to packet mode users. Signed-off-by: Keith Packard commit b7699a5907e64bc7547fcc27e73f4a35bbaabfff Author: Keith Packard Date: Fri Aug 6 13:09:21 2010 -0400 altosui: Add comments to Eeprom reader commit 0e917f3ff822616adb147517ac961422e5fedbfd Author: Keith Packard Date: Thu Aug 5 22:49:53 2010 -0400 altosui: Compute flight state from eeprom data This lets eeprom files be used to replay flights. Signed-off-by: Keith Packard commit a0a9b445a4d379730b67720f8d7b682d5206a582 Author: Bdale Garbee Date: Thu Aug 5 15:16:48 2010 -0400 update changelogs for Debian build commit e075b8623533965b1b77b77d38c2df32f5f77fce Author: Bdale Garbee Date: Thu Aug 5 15:16:24 2010 -0400 update changelogs for Debian build commit 410de62715a0830f03b0a65d6c7730dff51e6ef4 Author: Bdale Garbee Date: Thu Aug 5 15:15:04 2010 -0400 add freetts as a build dep commit 0b85160c44d934f3d1352c1c07c296d01ceffc32 Author: Bdale Garbee Date: Thu Aug 5 15:02:17 2010 -0400 update changelogs for Debian build commit d091099753d9cae01c4805812425ebea19ec09cf Author: Bdale Garbee Date: Thu Aug 5 15:00:46 2010 -0400 update changelogs for Debian build commit aed55ef1ce45b0f6e6fefeebf50be97607b31d65 Author: Bdale Garbee Date: Thu Aug 5 15:00:15 2010 -0400 working on java packaging details commit d8bf05f7ad55964c9bce0551e58f4ef6c9f721ad Author: Keith Packard Date: Thu Aug 5 13:50:18 2010 -0400 altosui: Split flight record out of telemetry class This will permit either telemetry or eeprom data to be used to construct the sequence of flight events for reply or data generation. Signed-off-by: Keith Packard commit 85a670b5a904d6750d0f179ae307baeb8fc7cbd2 Author: Keith Packard Date: Thu Aug 5 13:40:17 2010 -0400 altosui: Explicitly initialize Altos class Because the Altos class is never instantiated, the static initializers are never called, leaving the string to state mapping empty. Hand-code the call to the initialer instead. Signed-off-by: Keith Packard commit 02f17f2cd26189e2676a9dc0d86bd959ed0bc3f4 Author: Bdale Garbee Date: Thu Aug 5 00:54:05 2010 -0400 move to science menu commit 9e8f7f75442303f9bfa99a0435984f5d36863ae6 Author: Keith Packard Date: Sat Jul 31 10:34:21 2010 -0700 altosui: Split status and info panels into separate files This moves some code out of AltosUI.java into separate files Signed-off-by: Keith Packard commit 9c9b35254c693b3ade42b24d1e29eaf31e6ba2aa Author: Keith Packard Date: Sat Jul 31 10:24:56 2010 -0700 altosui: Clear displayed data rows as needed. Signed-off-by: Keith Packard commit 88e0137a60d7a13ddb7781befa76650e13ad44ae Author: Keith Packard Date: Sat Jul 31 10:07:38 2010 -0700 altosui: Merge gps date and time classes into gps class No reason to split out the date and time information from the other gps info. Signed-off-by: Keith Packard commit 1c3b2fe357d6acf28f48aeddd91693f10381be51 Author: Keith Packard Date: Sat Jul 31 10:05:15 2010 -0700 altosui: Capture config and version info in .eeprom files Instead of only writing the serial number to the .eeprom file, write all of the config values and all of the version reply to the .eeprom file. The config values, in particular, contain the accelerometer calibration data which is needed to correctly compute acceleration from the captured accelerometer data. Signed-off-by: Keith Packard commit e286eb61ad2a90746c1c31f95d26d5edb48738d3 Author: Keith Packard Date: Sat Jul 31 09:57:49 2010 -0700 altosui: rename AltosEeprom -> AltosEepromDownload, split out Altos constants Renames the eeprom downloading code and adds a new file to share the flight data constants across the various UI modules. Signed-off-by: Keith Packard commit e3a9e3815db3f290e28b40ae02aa654f515cfc37 Author: Bdale Garbee Date: Sat Jul 31 10:55:27 2010 -0600 update changelogs for Debian build commit 8fc261c2b77bb8aab201a0649a84b5ffa236ce26 Author: Bdale Garbee Date: Sat Jul 31 10:55:07 2010 -0600 see if my new freetts package works commit 2f114c7ff6b0deddb790d34139bb11ac37f8c0da Author: Bdale Garbee Date: Thu Jul 29 13:30:36 2010 -0600 update changelogs for Debian build commit 7877496d47ce6d25210c0e1c6500666dbfc0876c Merge: c71061a 4cf39b1 Author: Keith Packard Date: Thu Jul 29 12:07:49 2010 -0700 Merge remote branch 'origin/master' commit c71061a37d3d3be2855b61cde33d2371989d7681 Author: Keith Packard Date: Thu Jul 29 12:06:06 2010 -0700 Make altosui test script executable commit 4cf39b13a574cb656999cf329f5b08e7f910604b Author: Bdale Garbee Date: Thu Jul 29 12:57:31 2010 -0600 update changelogs for Debian build commit d1848193d8208388e4ccdfbed4e5663a9ba04dd3 Author: Bdale Garbee Date: Thu Jul 29 12:56:59 2010 -0600 add a jdk to the build deps commit 9ad4984124b6c05114feac4c4ac078dc248ce16a Author: Keith Packard Date: Thu Jul 29 11:56:24 2010 -0700 altosui: remove option to install to alternate volume commit 2e797b18f0724caf7aaf96f45997998c7416f34e Author: Bdale Garbee Date: Thu Jul 29 12:50:57 2010 -0600 update changelogs for Debian build commit 89109f9dff3ce855d80da166e3362375282f745d Author: Bdale Garbee Date: Thu Jul 29 12:47:37 2010 -0600 ugh, fixing failure due to aborted build commit 6fb8546575f6d99676dbb1dce190b0b7cf24b657 Author: Keith Packard Date: Thu Jul 29 11:45:56 2010 -0700 Moved Mac OS packaging to altosui dir commit 865d5cdf8931ffc796f608e3e12d7c5a70832825 Author: Bdale Garbee Date: Thu Jul 29 12:45:18 2010 -0600 add swig as a build dep commit 91d75fb3919f606a1956bf8c6423a8012d99a56a Author: Keith Packard Date: Thu Jul 29 11:45:12 2010 -0700 altosui: Switch eeprom extension back to .eeprom commit 33ffd89d5a64c991d28bd7369b61e1faa18f605b Author: Bdale Garbee Date: Thu Jul 29 12:40:52 2010 -0600 update changelogs for Debian build commit 62b4cc51a0f54ef363cbff46caef80a0afecdea2 Author: Bdale Garbee Date: Thu Jul 29 12:40:25 2010 -0600 update changelogs for Debian build commit 6f86db5e0360bef26b21336769b7635e3a11e160 Author: Keith Packard Date: Thu Jul 29 11:24:47 2010 -0700 Add Mac OS X packaging bits Signed-off-by: Keith Packard commit 950f0a8c54e5835ee5d8b0aea360bd8362c21bc5 Author: Keith Packard Date: Thu Jul 29 11:09:19 2010 -0700 altosui: construct Darwin application directory This adds the necessary files and build steps to construct AltosUI.app on a Darwin system. Signed-off-by: Keith Packard commit 669c5f52abb972a82ed6efbee7a8c7d20afb5cd0 Author: Keith Packard Date: Thu Jul 29 10:48:52 2010 -0700 libaltos: build with java src encoding UTF8 Signed-off-by: Keith Packard commit efa0e034a161f4852947cbac06537d6ba4422a0e Author: Keith Packard Date: Thu Jul 29 10:48:25 2010 -0700 altosui: remove debug printf Signed-off-by: Keith Packard commit 53c279b9e96da8b69837ae84038a78ca5707f2a5 Author: Keith Packard Date: Thu Jul 29 10:45:02 2010 -0700 altosui: Close serial, join reader thread, free altos_file Separating out the close and free actions ensures that the reader thread will not access freed memory or dereference a null pointer while shutting down the connection to the serial device. Otherwise, a race condition exists between the serial close and the thread join. Signed-off-by: Keith Packard commit b8bc9994d8bfde6116c8a509e70ddf45fc4decce Author: Keith Packard Date: Thu Jul 29 10:24:59 2010 -0700 altosui: Remove unnecessary freetts .jar files Signed-off-by: Keith Packard commit e33dbbba94ce42295e9fed9f4ba7e46f9eff1517 Author: Keith Packard Date: Thu Jul 29 10:24:09 2010 -0700 altosui: check for closed serial device before reading Signed-off-by: Keith Packard commit 27a2d0c00acf78628428c20ab68e2bfba06340da Author: Bdale Garbee Date: Thu Jul 29 11:02:38 2010 -0600 update changelogs for Debian build commit 537492dc961ee6a1945b1041ee3cc0d3f519a42c Author: Bdale Garbee Date: Thu Jul 29 11:01:21 2010 -0600 update changelogs for Debian build commit adf6cbcba23e24a3824f7e242ec37baa2750ab94 Author: Bdale Garbee Date: Thu Jul 29 10:59:18 2010 -0600 update changelogs for Debian build commit d0fd53bdab2f480cd43b6d7010c2094f4fccda91 Author: Keith Packard Date: Wed Jul 28 21:49:23 2010 -0700 Reset GPS ready status when GPS comes unlocked on the pad If GPS becomes unlocked, then report that in the UI and via voice. Signed-off-by: Keith Packard commit 5fd225c3a52445ecdc7c04fac5e3d9a0db177c66 Author: Keith Packard Date: Wed Jul 28 21:01:41 2010 -0700 altosui: report rocket ground bearing at landing only if known if state.from_pad is null, then there isn't any data to report. Signed-off-by: Keith Packard commit d2d772164af95a35ea0f5d2413a5be67de9a210f Author: Keith Packard Date: Wed Jul 28 20:18:36 2010 -0700 altosui: Replace device dialog. Center eeprom monitor. This adds a custom dialog for selecting device, which makes it look much nicer on the screen and allows the user to double-click on an entry to select it. Signed-off-by: Keith Packard commit ea32290704a8ca468f01172166b561833b20c954 Author: Keith Packard Date: Wed Jul 28 19:37:02 2010 -0700 altosui: Fix Save flight data monitor layout, add cancel Use GridBagLayout to improve the appearance of the flight data monitor widget, add a cancel button to stop loading data (useful if the connection is wedged). Signed-off-by: Keith Packard commit ce90f3fe2aa6e23695ccccb36a8e6e614a08ba31 Author: Keith Packard Date: Wed Jul 28 17:08:42 2010 -0700 altosui: Add progress bar for eeprom downloading status This has a progress bar tracking the state and block count while downloading stuff from telemetrum. Signed-off-by: Keith Packard commit 6599e9576c3da9325a1731144c1b8bc4943184c0 Author: Keith Packard Date: Wed Jul 28 15:41:34 2010 -0700 altosui: Add eeprom data capture function. No UI yet. Signed-off-by: Keith Packard commit 8a6040e143ecc7830cc1c0114de85f3b72c067eb Merge: 024d077 554a97e Author: Keith Packard Date: Wed Jul 28 13:29:51 2010 -0700 Merge remote branch 'keithp/macos' commit 024d077302f91bdb17abe70d3211ab0949dab8b9 Author: Keith Packard Date: Wed Jul 28 13:29:21 2010 -0700 Remove debug printf Signed-off-by: Keith Packard commit 826061eaca88c0dd75051a6006ef6703c91af595 Author: Keith Packard Date: Wed Jul 28 13:10:11 2010 -0700 Add voice test command for help in adjusting volume. Signed-off-by: Keith Packard commit 71da54a5ce255395376a44586782ab8b6f3b289f Author: Keith Packard Date: Wed Jul 28 13:01:52 2010 -0700 Make voice and channel menus work. Stores voice and channel data to preferences. Signed-off-by: Keith Packard commit e76b9cc32bbcc5176d9bdd6f8d79778024627382 Author: Keith Packard Date: Wed Jul 28 12:24:53 2010 -0700 altosui: Catch errors opening USB devices. Limit list to relevant devices Avoids a segfault when failing to open a device. Limit listed telemetry devices to just TeleDongle units. Signed-off-by: Keith Packard commit 172a2817dde6718724f2b5fad5a7761801446fa0 Merge: f2a006f 81bf204 Author: Keith Packard Date: Wed Jul 28 11:20:22 2010 -0700 Merge branch 'macos' commit f2a006fd98045066bdf429cc142d033e9feb0a8f Author: Keith Packard Date: Wed Jul 28 09:31:09 2010 -0700 Make ao_log_data re-entrant as it is used for both sensor and GPS logs Because ao_log_data is called from two different threads, failing to make it re-entrant would cause the 'log' pointer parameter to get overwritten if another thread asked to log data while the eeprom was busy writing out a block. This would cause the second thread to re-writing data from the first thread's address, but without re-checksumming the data as the checksum is computed before the log mutex is taken. The bug can be seen by log blocks with invalid checksums. Here's what happens with the ao_gps_tracking_report and ao_log threads: ao_gps_tracking_report ao_log Writes a bunch of records *blocks* in the eeprom flush sets ao_log_data 'log' to global 'log' computes checksum for 'log' block *blocks* on ao_log_mutex Wakes up sets ao_log_data 'log' to 'gps_log' writes remaining records 'gps_log' is left with svid = 0 *blocks* on ao_gps_tracking_data writes data, reading from the current ao_log_data 'log' pointer which points at 'gps_log' Making ao_log_data re-entrant fixes this by ensuring that the 'ao_log' thread has its own copy of the ao_log_data 'log' parameter. I made this function take an __xdata restricted pointer so that it could be passed in the dptr register instead of needing to go on the stack. Signed-off-by: Keith Packard commit 554a97ef455c801dcab825815f44520f96f4c3f3 Author: Keith Packard Date: Tue Jul 27 19:29:38 2010 -0700 Force java source encoding to UTF-8 commit 81bf2042ca39eb106b789e5a08647c3114669358 Author: Keith Packard Date: Tue Jul 27 15:29:28 2010 -0700 Java voice reporting cleanups. Make sure it says something at the end of a log file replay. Make sure it reports max speed after motor burn out, and max height after apogee. Signed-off-by: Keith Packard commit 8f2f38f2a9fb0c106e2c6b60cdc205292ce329ea Author: Keith Packard Date: Tue Jul 27 10:18:20 2010 -0700 Java clean ups -- use varargs where possible, remove AltosSerialReader Add methods that format stuff using String.format for voice and serial link, remove AltosSerialReader class and just embed that in the AltosSerial class directly. Signed-off-by: Keith Packard commit 734cd15ccff691f851359518ce6118f29dc9f88d Author: Keith Packard Date: Tue Jul 27 10:18:09 2010 -0700 Remove directories as .class file dependencies; it makes them get rebuilt all the time commit 809feb75e2155e84aebfcc431867edcfd9054670 Author: Keith Packard Date: Tue Jul 27 01:22:56 2010 -0700 Clean up altosui build a bit commit 3784578a40dcc61f447435cfdf22e13c409cb9c0 Author: Keith Packard Date: Tue Jul 27 00:16:15 2010 -0700 Add application icons for Mac OS X commit 2c273710ea9b76ebee4101893f9fe84be8a02354 Author: Keith Packard Date: Tue Jul 27 00:11:58 2010 -0700 Add Mac OS X packaging files for altosui commit a58c44cd904e5429b807e5c23913051ed6484edc Author: Keith Packard Date: Tue Jul 27 00:09:41 2010 -0700 libaltos: build fat 10.5-compatible library Signed-off-by: Keith Packard commit 4e3285575e0c7d029e799258587e965779990099 Author: Keith Packard Date: Tue Jul 27 00:09:18 2010 -0700 libaltos: make clean remove all built files Signed-off-by: Keith Packard commit fb8507975c6e081de2e909eca6faaa8f868b609e Author: Keith Packard Date: Tue Jul 27 00:08:38 2010 -0700 libaltos needs -I. on all systems Signed-off-by: Keith Packard commit 0a782026f6b19e84ffd44f1ae1b466363474bd30 Author: Keith Packard Date: Mon Jul 26 18:10:07 2010 -0700 Darwin doesn't have strndup. This provides a private version of this GNU extension. Signed-off-by: Keith Packard commit b51497597868a40df039dd3ca11b35a6258bbbb3 Author: Keith Packard Date: Mon Jul 26 18:04:10 2010 -0700 Re-enable Linux support for altosui. This steals code from cc-usbdev for scanning the USB tree and uses the same tty code as on Darwin Signed-off-by: Keith Packard commit e9153c4f2c71ed965822fcfe5112d2bc38506baf Author: Keith Packard Date: Mon Jul 26 17:04:04 2010 -0700 Re-enable freetts commit 17188f36fe18c23bc2eb877ac9a01b7693f4b863 Author: Keith Packard Date: Mon Jul 26 17:03:47 2010 -0700 Present list of altos devices in nice format commit 005e2d6a7bb3b0546b0c1273296875621632ec6d Author: Keith Packard Date: Mon Jul 26 15:42:48 2010 -0700 Switch AltosUI to libaltos for device access Signed-off-by: Keith Packard commit c726d8f6eb861801d7543552beab6ee2c920c96f Author: Keith Packard Date: Mon Jul 26 15:41:39 2010 -0700 Add libaltos which talks to USB connected altos devices commit 05111d5be4d37bedaaee6415d6ee27347e6a112c Author: Keith Packard Date: Mon Jul 26 12:52:17 2010 -0700 When the EP0 IN buffer is full, don't panic, just skip sending another If the host doesn't pull the IN packet out of EP0 before sending another SETUP command along, the IN buffer will still be busy when we try to reply to the SETUP command. While I don't quite understand why this would ever happen, there's no need to panic about it, just drop the reply packet on the floor. Signed-off-by: Keith Packard commit d0647950b76bfa9942e4f8cf87353f2b724099f4 Author: Bdale Garbee Date: Wed Jul 21 14:26:36 2010 -0600 fix text since TM only has one led to blink commit 8eda9fe94a7fd40cb84f50e17e64956f1584ebdc Author: Bdale Garbee Date: Tue Jul 20 22:24:32 2010 -0600 update changelogs for Debian build commit cd8aa79de72b8b6b3a26d0c2522e94c621b70f13 Author: Bdale Garbee Date: Tue Jul 20 22:24:01 2010 -0600 update to latest Debian standards version commit 3284c7516e302e6db403d18866924ad926ffb2a7 Author: Bdale Garbee Date: Tue Jul 20 22:20:08 2010 -0600 update changelogs for Debian build commit 8f1933717e3acfbcb09191da6e79a7944f91f9d9 Author: Bdale Garbee Date: Tue Jul 20 22:19:27 2010 -0600 reflect documentation file name change commit 2cf1ef555a7feceeb1c333b273c19dd848e8d03f Author: Bdale Garbee Date: Tue Jul 20 22:15:47 2010 -0600 update changelogs for Debian build commit 74c67fc466118b86b4eb5173f7a6886ae220a985 Author: Bdale Garbee Date: Tue Jul 20 22:14:27 2010 -0600 add build dep for sndfile commit 0794ab1e13313fa49b7caf01aef20b052ad78a88 Author: Bdale Garbee Date: Tue Jul 20 22:10:01 2010 -0600 update changelogs for Debian build commit 15a6791ba8f8313b6b55752c3fa7dc254d56dd5c Author: Bdale Garbee Date: Tue Jul 20 22:08:56 2010 -0600 update changelogs for Debian build commit e747954b6a9e71705f619684df8a118a909b1039 Merge: bd40a5b 695879d Author: Bdale Garbee Date: Tue Jul 20 22:07:22 2010 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit bd40a5b431847c071f5c486d754eca5627e5e3b9 Author: Bdale Garbee Date: Tue Jul 20 02:12:03 2010 -0600 significant update commit 695879dbccfc5ec6b79698653c58814158f91686 Author: Keith Packard Date: Wed Jul 14 19:07:02 2010 -0700 Switch DBG pins to GPIO when using any debug commands. Reboot to restore. If you want to use TeleMetrum as a debug dongle, you need to flip the three pins used to talk to the remote debug port from SPI mode to GPIO mode. This patch doesn't provide any way to get back to SPI mode, so you'll have to reboot the TeleMetrum to write out config parameters or log flight data after using any debug commands. Signed-off-by: Keith Packard commit a9ec6be0e92dee01f7aac006ef6f7779c1da1b36 Author: Keith Packard Date: Sat Jul 3 17:42:36 2010 -0400 Telemetry code was mis-computing RSSI The RSSI data from the hardware reports in 1/2 dBm increments, and so must be divided to report plain RSSI numbers. Signed-off-by: Keith Packard commit 62294ea3830d3ea261a8761edc9fa6f98201d321 Author: Bdale Garbee Date: Thu Jun 24 12:38:23 2010 -0700 update changelogs for Debian build commit 4766b13d1241fa585907c6f77707d2d4b3ccff75 Author: Bdale Garbee Date: Thu Jun 24 12:37:55 2010 -0700 update changelogs for Debian build commit 52834517c0706b1f16fb81643a42dc1c1997e00a Author: Keith Packard Date: Mon Jun 21 15:53:33 2010 -0700 Abort any in-progress radio operation when changing radio channel In monitor mode, the current receive operation must be aborted so that the radio channel change can take effect without receiving a telemetry packet on the old channel. Aborting any in-progress radio operation will make sure that happens. Signed-off-by: Keith Packard commit 5933eaa44fe45027b856f1303dd657b974eb53e7 Author: Keith Packard Date: Mon Jun 21 11:44:32 2010 -0700 ao-postflight: was walking off state.data array commit 11d155d558d0b121b66f089adee0a47d71f65a78 Merge: 544003a 24393ea Author: Keith Packard Date: Wed Jun 16 21:54:06 2010 -0700 Merge remote branch 'mjb/master' commit 544003a8da0248fd6f3c62ded86af74ab7cdadf6 Merge: 267923e 93c1e29 Author: Keith Packard Date: Wed Jun 16 21:52:23 2010 -0700 Merge remote branch 'origin/master' commit 267923e56e22b3635a21f42ef77a3a36158bc273 Author: Keith Packard Date: Wed Jun 16 21:49:43 2010 -0700 Add special code for USB panic's. The USB system may panic if the hardware isn't ready for IN data when the driver thinks it should be. This adds a special panic code to make figuring this out easier. Signed-off-by: Keith Packard commit 50ae347bf9de49ccfc92d26888f36e155fb406a3 Author: Keith Packard Date: Wed Jun 16 21:48:04 2010 -0700 ao-view: disable radio telemetry monitoring during channel change This makes ao-view disable the radio so that the channel change has an immediate effect rather than waiting for a packet on the old channel. Note that this should also be fixed in the TM code itself so that this change wouldn't be required. Signed-off-by: Keith Packard commit 24393eab0ea085f2d0224b59fdc3c00693e5d3a9 Author: Mike Beattie Date: Thu Jun 17 14:04:01 2010 +1200 Extension to KML output format, and minor bug fix Extended KML output by breaking flight into coloured segments representing flight state. Add extra statistical information to description bubbles visible in Google Earth when clicking on links in My Places. Fix Bugs: * output kml to file provided as argument. * move kml coordinate output code to take advantage of nsat calculation * remove superfluous %9.2f format specifier from raw_file output. Signed-off-by: Mike Beattie commit 93c1e29b07c331a5ca6e0f647b9d2e9266ed3014 Author: Bdale Garbee Date: Tue May 18 23:12:45 2010 -0600 updates from Bob commit bb46c9a1da5788a082e4483e576a5a6d3963507b Author: Bdale Garbee Date: Tue May 18 00:26:28 2010 -0600 update changelogs for Debian build commit 16c4cae7ebed7bd3ee0f12b8872bf950574f17e8 Author: Bdale Garbee Date: Tue May 18 00:26:00 2010 -0600 update changelogs for Debian build commit bc89d962c87b50e5487628f8ca25e4443ac4823d Author: Bdale Garbee Date: Tue May 18 00:24:03 2010 -0600 merge the altusmetrum-themes package commit 0c6cf621dfd8339b8bc3915750a3147235f1331b Merge: 32e430b 563a9dc Author: Bdale Garbee Date: Mon May 17 23:59:43 2010 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 32e430b8a5f93b312f6359b4d553bad92ed37b19 Author: Bdale Garbee Date: Mon May 17 22:43:19 2010 -0600 merge in a derivative of Bob Finch's mere mortals guide as a getting started chapter commit 563a9dcdfef42718370c49f16cc2271642b3e055 Author: Keith Packard Date: Mon May 17 21:30:57 2010 -0700 Finish basic flight monitoring UI with voice using FreeTTS This captures telemetry data to log files and presents flight status information in audio form using FreeTTS. Signed-off-by: Keith Packard commit 69092ffd23ac1928d5c84413fd00c2423f313fc2 Merge: 3c2211a cc002c0 Author: Bdale Garbee Date: Mon May 17 20:10:46 2010 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit cc002c0a43a02845ba67d1a61828be382f307b2e Author: Keith Packard Date: Sun May 16 22:31:23 2010 -0700 Fix telemetrum.inf, tested by Adrian and Keithp commit 3c2211ad7877d622435bc9e8c9c0b01d62be6ff0 Author: Bdale Garbee Date: Thu May 13 15:37:37 2010 -0600 typo fix from Bob commit f0433c83d76e90d78fb86a1f4a2f145f3c57fb25 Author: Bdale Garbee Date: Thu May 13 01:27:39 2010 -0600 updates from Bob commit 0f05cf06e3f1ec510b11d993d9038211ac66c97b Author: Bdale Garbee Date: Wed May 12 19:54:04 2010 -0600 update changelogs for Debian build commit 6bd85138c1bfbc1d8b78dce1501870a65a64db36 Author: Bdale Garbee Date: Wed May 12 19:53:40 2010 -0600 lose the quotes since they apparently aren't necessary commit d639144b9bb840fbbced199738787ec054eddf12 Author: Bdale Garbee Date: Wed May 12 17:04:41 2010 -0600 update changelogs for Debian build commit ae6854df00579ea1c3486f1bf8f19443d5ac9498 Author: Bdale Garbee Date: Wed May 12 17:04:13 2010 -0600 update desktop file for conformance with current standards commit 7191d74e680a63728f5eb139069a674fef969e6c Author: Bdale Garbee Date: Wed May 12 16:45:00 2010 -0600 update changelogs for Debian build commit 68eaaa694bb7bf20642ad11eac8a13c1c8e21b7d Author: Bdale Garbee Date: Wed May 12 16:44:14 2010 -0600 add desktop file commit 9d3d09578381bb6e6f88c39b0e945371bbc22c5a Author: Bdale Garbee Date: Wed May 12 16:34:49 2010 -0600 add desktop file provided by Bob Finch commit 3cc1dad3b497524ffef61190dd68908cb19e8c35 Author: Bdale Garbee Date: Wed May 12 16:28:35 2010 -0600 add initial package build scripts for Arch Linux from Bob Finch commit 1b8671bd0a00cec6ae4ccf442cd007b18af82fb0 Author: Bdale Garbee Date: Sun May 9 01:41:00 2010 -0600 lots of updates commit 53b9a9bc28a9278249ff37f92110c21380e93cda Author: Bdale Garbee Date: Thu May 6 13:59:23 2010 -0600 update changelogs for Debian build commit cde60f16f6ab2cdd5010a0e106ae312d144947cf Author: Bdale Garbee Date: Thu May 6 13:58:31 2010 -0600 Revert "Merge remote branch 'remotes/origin/fix-reset'" This reverts commit 314d27a73c903fef2968dabac3d5313573713460, reversing changes made to fa77db2ffd8a749c93767db5a6311131e00473ae. For whatever reason, this is utterly not doing the right things today! commit 8be04df7e1e0a369ffb1137c6e2ec63585e3c935 Author: Bdale Garbee Date: Thu May 6 12:48:00 2010 -0600 update changelogs for Debian build commit 314d27a73c903fef2968dabac3d5313573713460 Merge: fa77db2 823fc0a Author: Bdale Garbee Date: Thu May 6 12:47:30 2010 -0600 Merge remote branch 'remotes/origin/fix-reset' commit 823fc0ac27b8df9b4ba1ca0f229b431baf5b46dd Author: Keith Packard Date: Wed May 5 12:50:39 2010 -0700 Don't change dbg clock while changing reset_n. Use 20ms everywhere This changes the reset code to be more conservative about changing things at the same time, and also sets all timings to 20ms to make debugging with the scope easier. Signed-off-by: Keith Packard commit fa77db2ffd8a749c93767db5a6311131e00473ae Author: Bdale Garbee Date: Wed May 5 02:34:41 2010 -0600 update changelogs for Debian build commit 8b6767e24a88482dbd3d4c4c969a0be08917d22b Author: Keith Packard Date: Wed May 5 01:32:46 2010 -0700 Use ao_delay to sleep for 2 seconds instead of trying ao_sleep ao_sleep doesn't delay for a specified time interval as much as one might want it to. commit e6bb80975fde20928a830170f0821d59a8c72690 Author: Keith Packard Date: Wed May 5 01:31:57 2010 -0700 Fix all stdio reading functions to be __critical Oh, right SDCC has '__critical' to mark sections of code that need to run with interrupts disabled; no need to use EA = 0 and EA = 1. Signed-off-by: Keith Packard commit ff03cdf746b83542ebcca00d32e6cc69ccfc122d Author: Bdale Garbee Date: Wed May 5 01:57:54 2010 -0600 update changelogs for Debian build commit 8702f497c4278648303eced1aed5bd76d559521a Author: Bdale Garbee Date: Wed May 5 01:57:11 2010 -0600 initial attempt at a telemetrum turn on script .. needs work commit 01cefa181b04e53c20109ef8f3ffff633744da73 Author: Bdale Garbee Date: Wed May 5 01:56:51 2010 -0600 update changelogs for Debian build commit 45a1c2d2dfb69e5269ef2756fcd0f734b48d41cb Author: Bdale Garbee Date: Wed May 5 01:54:33 2010 -0600 update changelogs for Debian build commit f7ff3278bb670df59d7425a014cfe8e3718fea3f Author: Keith Packard Date: Wed May 5 00:44:42 2010 -0700 Disable interrupts while reading from stdin With multiple input source support, there is a lag between asking a device if it has data and then waiting for more data to appear. If an interrupt signalling additional input arrives in this interval, we'll go to sleep with input available. This patch uses a big hammer by just disabling interrupts for the whole process. Signed-off-by: Keith Packard commit aa9ff021d683764a43800eaa18ea0c9be5134939 Author: Keith Packard Date: Tue May 4 21:42:54 2010 -0700 Revert "Add optional 's' command to packet slave to enable/disable slave mode" This reverts commit e7dc7fab787df63a4de72c8450e94092eb04d7db. This patch didn't work, and magically appears to break flashing TM from TD. commit 8c95f33686f69da717013ec2c25dbcd99c03aa45 Author: Bdale Garbee Date: Thu Apr 29 17:48:44 2010 -0600 more text created during SFO->DEN flight commit af0613ffc178b9b1f011c315923f92f2581fe53e Author: Bdale Garbee Date: Tue Apr 27 00:18:43 2010 -0600 update changelogs for Debian build commit 99094f02bf4849ba1f6b9842ded6c39d894320f7 Merge: 641e76c 75d8ffd Author: Bdale Garbee Date: Tue Apr 27 00:17:37 2010 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 641e76c5d419dab057298541b3a7546877643198 Author: Bdale Garbee Date: Tue Apr 27 00:17:15 2010 -0600 add some RF usage information from an email reply sent today, and re-indent commit 75d8ffd4eadf31d50b2f58c021530c17ff1bdc66 Author: Keith Packard Date: Fri Apr 23 13:53:25 2010 -0700 Autodetect flite voice registration function Old versions of flite exported the function 'register_cmu_us_kal' while new ones export 'register_cmu_us_kal16'. This patch just checks which one is available and uses that. Signed-off-by: Keith Packard commit 97f4874d19ec05c81a04a3ecd06abffcf7fbfafc Author: Keith Packard Date: Thu Apr 22 16:25:35 2010 -0700 More ALtosUI changes commit e7dc7fab787df63a4de72c8450e94092eb04d7db Author: Keith Packard Date: Thu Apr 22 14:53:44 2010 -0700 Add optional 's' command to packet slave to enable/disable slave mode This option has been selected for teledongle so that you can use slave mode and hook two teledongles together over the RF link. Signed-off-by: Keith Packard commit f4383394b5d2b275b21e3ce8040d8cb9e48bb375 Merge: 5f93cf8 c879b17 Author: Bdale Garbee Date: Sun Apr 18 08:36:07 2010 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 5f93cf8c73555f43c14b1b0757f264bde69e9b8a Author: Bdale Garbee Date: Sun Apr 18 08:35:43 2010 -0600 capture work done on SFO->DEN flight commit c879b178d83c9a9a521f42a960b10e19b11cee92 Author: Keith Packard Date: Sat Apr 10 22:09:57 2010 -0700 Increase reset switch time to 100ms Signed-off-by: Keith Packard commit b3a2e1221735d54dc3f2b97b4e75ed6f33ab8227 Author: Bdale Garbee Date: Sat Apr 10 15:01:14 2010 -0600 update changelogs for Debian build commit 9394393c24c0a96b94319f2d0aa78fb498a121c9 Author: Keith Packard Date: Fri Apr 9 17:51:01 2010 -0700 Only have the slave return a packet if it received one. When the receive is aborted to switch modes, it's important to not immediately re-acquire the radio and try to send a packet as the aborting thread won't know to kick the receiver again. This prevents the 'C' command from locking up as it tries to stop the packet slave before turning on the transmitter. Signed-off-by: Keith Packard commit ce39372a3aeffff1a08d609e63164a00cf974663 Author: Bdale Garbee Date: Fri Apr 9 13:50:49 2010 -0600 wrong Yaesu model commit a832c7e9d9e9e420e1281136188bd53b34c56464 Author: Bdale Garbee Date: Fri Apr 9 00:10:03 2010 -0600 update changelogs for Debian build commit c0ee1ae25e1d18138d8372f47085de48ffada344 Author: Bdale Garbee Date: Fri Apr 9 00:09:21 2010 -0600 file changed by auto tools commit 25e69ebfec94560e0714cf2cc623dc9697b4ea99 Author: Bdale Garbee Date: Fri Apr 9 00:08:32 2010 -0600 update changelogs for Debian build commit ea5d4f01d18d93d032f05933041b7b6881289780 Author: Keith Packard Date: Thu Apr 8 22:45:04 2010 -0700 libflite may forget to reference libasound commit 4b02f293e9c32a568fad89558274f21157e7d473 Author: Bdale Garbee Date: Thu Apr 8 20:08:07 2010 -0600 update changelogs for Debian build commit 5c3b6e2d1989bcaa19ae3e294f297ec3e5648a53 Author: Bdale Garbee Date: Thu Apr 8 19:56:40 2010 -0600 update changelogs for Debian build commit 01e524f11a67390a8ea1f20aa2d611909b4da363 Author: Bdale Garbee Date: Thu Apr 8 19:55:05 2010 -0600 choose a better set of docbook xsl files commit f93c9bf3695862db31f2c3b3bc5a7bb24ef3766c Author: Keith Packard Date: Thu Apr 8 17:28:17 2010 -0700 When changing RESET line, delay 20ms The GPS data sheet suggests a 1uF cap on the reset line to ensure it is held low long enough for the power supply to come up to voltage. TM v1.0 loads a 0.001uF cap there, but in case that isn't large enough, it could be replaced with the larger one. This change makes sure that even with that larger value, the debugging link will be able to reset the target. Signed-off-by: Keith Packard commit baaaac499cfbc1286ae55374cfdc796d32983b92 Merge: a4356b9 dec9971 Author: Keith Packard Date: Thu Apr 8 13:31:23 2010 -0700 Merge remote branch 'origin/master' commit a4356b9bcf679c4d7b88fbbad77a98ecb0f80098 Author: Keith Packard Date: Thu Apr 8 13:30:16 2010 -0700 Use 16-bit flite voice (which appears to have changed symbols recently) commit 447c121fc1ceb878e45718ad1364a5349965a59a Merge: 10330d2 53ca3f9 Author: Keith Packard Date: Thu Apr 8 11:46:56 2010 -0700 Merge remote branch 'origin/master' into altosui commit dec9971d70f17067ba0051206851b49c7604ac85 Author: Bdale Garbee Date: Thu Apr 8 12:43:03 2010 -0600 update changelogs for Debian build commit 6629ec52def8917ad033847812a1adc4c3e9c947 Author: Bdale Garbee Date: Thu Apr 8 12:42:47 2010 -0600 lose the url entirely for now commit a1539a075a0cc79c9122fea878d9a20ee722a18c Author: Bdale Garbee Date: Thu Apr 8 12:41:42 2010 -0600 update changelogs for Debian build commit 934434ffb3514fe9ff95692784750d7c5217a5d3 Author: Bdale Garbee Date: Thu Apr 8 12:41:28 2010 -0600 fix typo in url commit 8a067cd0eebbec313fc39086747ef618f2d1cf37 Author: Bdale Garbee Date: Thu Apr 8 12:36:18 2010 -0600 update changelogs for Debian build commit 05ad58389fa3814ecb56344bf4ec3a3e025920a2 Author: Bdale Garbee Date: Thu Apr 8 12:34:54 2010 -0600 need another build dep commit 6fbdc7037db185f03bd5ff96b9d9320646572df7 Author: Bdale Garbee Date: Thu Apr 8 12:28:49 2010 -0600 update changelogs for Debian build commit 8f1d47e9cd61738e516d15fc97d5730d80611e87 Author: Bdale Garbee Date: Thu Apr 8 12:28:20 2010 -0600 update changelogs for Debian build commit 10330d23518c94a8b791193a97a6cc07b1c9a97c Author: Keith Packard Date: Tue Apr 6 00:58:00 2010 -0700 Enable telemetry monitoring Signed-off-by: Keith Packard commit 9e10e43eff9de3f034da49c4f88728fb933f5035 Author: Keith Packard Date: Tue Apr 6 00:56:57 2010 -0700 Tasks may move in task structure as a result of ao_exit Signed-off-by: Keith Packard commit a7fc7901cd591c93d9d0cffeec2977ebb17554d4 Author: Keith Packard Date: Tue Apr 6 00:55:19 2010 -0700 TD reports "not-connected" when GPS has 0 sats commit e064d05da87926c19fb665b40fb280fb59328183 Author: Keith Packard Date: Tue Apr 6 00:54:52 2010 -0700 serial port read function cannot be interrupted. poll every 1 second commit c099a67d9ea37e731e0eca318102560281ac240f Author: Keith Packard Date: Mon Apr 5 22:42:05 2010 -0700 Interrupt running replay thread when starting another replay Signed-off-by: Keith Packard commit cc600a0389720bc7e435dbda8bec080ef19e0c58 Author: Keith Packard Date: Mon Apr 5 22:21:46 2010 -0700 Add Linux device discovery AltosDeviceLinux.java scans /proc to locate suitable devices. This will be hooked up to the UI shortly. commit c28646d72005daeadb70b95fd3b0050bd752cc55 Author: Keith Packard Date: Sun Apr 4 20:55:30 2010 -0700 Switch TeleMetrum from v0.2 to v1.0 Signed-off-by: Keith Packard commit d22ba55ae0e056530a727df50f14ad853d79a2c8 Author: Keith Packard Date: Sun Apr 4 20:55:18 2010 -0700 Clean up some altosui comments commit 6251e89c6eea655769f77bc18e98e79c99cf3cad Author: Keith Packard Date: Sun Apr 4 19:54:46 2010 -0700 Don't abort the radio when enabling telemetry monitoring If telemetry monitoring is already on, then there isn't any point, and if it's not on, then presumably there isn't any radio work to abort. Signed-off-by: Keith Packard commit b0b99f30c4e00689e9faceb363a5c7284541c6be Author: Keith Packard Date: Sun Apr 4 19:48:50 2010 -0700 Make ao_radio_idle keep trying to get the radio to idle. Attempting to abort a radio operation could lead to a hang if the user of the radio jumped in and started using it again before the task attempting to abort woke up. This change just keeps smacking the radio until the radio goes idle long enough to detect it. commit 0e7abc9fedec568b431c983d3df1b0b29f4f10e3 Author: Keith Packard Date: Sun Apr 4 16:32:04 2010 -0700 Use RXTX for serial comm. Add logdir preference saving commit c66eebad323e4572bb7cc23bc476ee144f03e9b8 Author: Bdale Garbee Date: Sat Apr 3 08:02:44 2010 -0600 rewrite urls in docbook format commit 3d34c488c5b71020d86f83156fd821fd860bf214 Author: Keith Packard Date: Sat Apr 3 00:02:44 2010 -0700 Make .jar file commit 4bea4c327e002ce8f88218f0d840af7c1521bc35 Author: Keith Packard Date: Fri Apr 2 23:25:02 2010 -0700 Remove unused cell renderer class commit 4ad062969ae8a608b8428620579bbe114e580a11 Author: Keith Packard Date: Fri Apr 2 23:20:38 2010 -0700 Remove GPS data missing from skytraq. Save max height/accel/speed commit ebd49d4ec6b0b60c85b2de45cfe2e36add8fe9bf Author: Keith Packard Date: Fri Apr 2 23:05:40 2010 -0700 Report current gps nsat, not last locked nsat commit 3f9b66b307ee88172151e3bee58e50f5acbde109 Author: Keith Packard Date: Fri Apr 2 23:00:30 2010 -0700 Clean up GPS data formatting commit 9cc48698ec14c34d437baad7b6540edc31e9741c Author: Keith Packard Date: Fri Apr 2 22:47:40 2010 -0700 Fix state updates commit 6d523ee4dad3b9890d3cf05852459101fe7e26ea Author: Keith Packard Date: Fri Apr 2 21:48:41 2010 -0700 Fix status update commit caa0bf49668344937483190d1c258bfa32971d19 Author: Keith Packard Date: Fri Apr 2 21:44:00 2010 -0700 Fix up table formatting commit a579402f428dd6a0529505069d1846f70b83ab5d Author: Keith Packard Date: Fri Apr 2 18:10:59 2010 -0700 Display table of flight info. gps is not working yet though commit 65079f84ea64220fa928c3ad96652fed159bf74b Author: Keith Packard Date: Fri Apr 2 16:07:40 2010 -0700 Steal C code from ao-view commit 02f2be90879b682b6e648cf2debc83223d127b9d Author: Keith Packard Date: Fri Apr 2 13:37:52 2010 -0700 Add telem parsing code commit 8c600abf87c95f8f214b5e56ff6eab955795dff5 Author: Bdale Garbee Date: Thu Apr 1 23:56:47 2010 -0600 crudely incorporate "day in the life" info from web page commit 53ca3f98aeb70cb780031fee788de950e4388cf6 Author: Bdale Garbee Date: Thu Apr 1 23:39:42 2010 -0600 tweak copyright assertion commit 6454e309858aeef7912e862de8632618d89b4205 Author: Keith Packard Date: Thu Apr 1 18:31:14 2010 -0700 Fix windows install file commit 584ab100640a07dec6e06829e73b7260d17d2232 Author: Keith Packard Date: Thu Apr 1 18:30:56 2010 -0700 Add Windows install .inf file commit a06bee96e648d9ded8776f3d6cba9505e7be1a60 Author: Keith Packard Date: Wed Mar 31 23:05:03 2010 -0700 Add telemetry data parsing code commit 7f233369e32c3254165ee251df0a3dbc21ea5a29 Author: Keith Packard Date: Wed Mar 31 13:49:54 2010 -0700 Start adding java-based UI commit 76768804e68ed09421d7a48cb0b390f102ce2d76 Author: Bdale Garbee Date: Tue Mar 30 23:26:35 2010 -0600 make lintian happy commit eb3cc3e9b60ec23acbb7d797affa743d671801ab Author: Bdale Garbee Date: Tue Mar 30 23:19:48 2010 -0600 update changelogs for Debian build commit 00f49c8fb0aa38331360bdb85c32bcebe60dcdc3 Author: Bdale Garbee Date: Tue Mar 30 23:19:07 2010 -0600 fix typo commit f03ed0876c67b58624abf0c14bf73444b0322d3c Author: Bdale Garbee Date: Tue Mar 30 23:18:37 2010 -0600 update changelogs for Debian build commit b41e617080fe825f7810ee5eee52ea37f7618ec6 Merge: 28e40cc df7bda1 Author: Bdale Garbee Date: Tue Mar 30 23:15:32 2010 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos Conflicts: ChangeLog commit 28e40ccfcd80ab8764d4aa235257cea4d193a0c1 Author: Bdale Garbee Date: Tue Mar 30 23:14:47 2010 -0600 update changelogs for Debian build commit 20d4d410e0fc04fe192e309811eed6c0194fa5a8 Author: Bdale Garbee Date: Tue Mar 30 23:11:40 2010 -0600 initial harness for documentation commit 9801ff7de21027935f52ccabaa3ff157e22d21ce Author: Bdale Garbee Date: Mon Mar 15 12:04:18 2010 -0600 move gbp.conf into debian/ commit df7bda1f32b0049c3878c325ea0b55999f3980e3 Merge: 23da4f3 a7042fe Author: Keith Packard Date: Fri Mar 12 10:38:26 2010 -0800 Merge remote branch 'origin/master' commit 23da4f3bcdd1d780c9e1f6b68ad2fb309fcae6ba Author: Keith Packard Date: Fri Mar 12 10:37:32 2010 -0800 Document the ao-dumplog '--remote' flag for radio-link downloads The --remote (or -R) flag uses TeleDongle to fetch data over the radio command link from TeleMetrum. It's been there for a while, but the man page failed to mention it. Signed-off-by: Keith Packard commit 93df98898f8cd199ae13158bc4f65e3494c954ad Author: Keith Packard Date: Fri Mar 12 10:35:12 2010 -0800 Round radio calibration value instead of truncating The radio calibration function in the bring-up code was truncating the radio calibration value which caused the resulting frequency to always measure above the target frequency, instead of trying to get as close as possible. This change will result in a closer frequency match, but may sometimes be below the target frequency. Signed-off-by: Keith Packard commit a7042fe7d065d1da1252be5ad43e3c9856214dc8 Author: Bdale Garbee Date: Fri Mar 5 19:11:11 2010 -0800 update changelogs for Debian build commit eda5e1166a97766aa22561beaa1086ba4e19ee16 Author: Bdale Garbee Date: Thu Mar 4 17:33:39 2010 -0700 update changelogs for Debian build commit 6e61170d42936c18cd6efba6f4c14af616a30745 Author: Keith Packard Date: Sun Feb 28 18:24:46 2010 -0800 Need to duplicate new altitude conversion code in aoview. Altitude conversion is now done with a smaller table and interpolation instead of a giant table. Signed-off-by: Keith Packard commit e4e17e6d3844ae682a0e7a9469a522359bac77b6 Author: Bdale Garbee Date: Sat Feb 27 17:36:13 2010 -0700 update changelogs for Debian build commit a1478f65538fdaac7b58ffbd958a035b74956099 Merge: 901fce5 bbf8c9f Author: Keith Packard Date: Sat Feb 27 15:19:33 2010 -0800 Merge remote branch 'origin/master' commit 901fce5fe3e2762406079ecaa787612b5ed4b34a Author: Keith Packard Date: Sat Feb 27 15:18:47 2010 -0800 Add .gitignore for ao-bringup Signed-off-by: Keith Packard commit 7aab73a265841aac817ea34235dd1eb819debf76 Author: Keith Packard Date: Sat Feb 27 15:14:04 2010 -0800 Fix up LED colors for each product. Different products assign different color LEDs to the two available LED drivers (P1_0, P1_1). Make the LED color pin assignments per-product (in ao_pins.h), then deal with not always having a green LED. Signed-off-by: Keith Packard commit 1d6d8d76ec65373ffee70add75d183f5c4168f61 Author: Keith Packard Date: Sat Feb 27 15:11:44 2010 -0800 Eliminate deadlock when writing config from radio link Writing the 'Saved\r\n' string would fill the packet buffer and cause a flush to occur, which would need to wait for the radio link to receive and transmit a packet. The radio link always re-fetches the radio channel number when lighting up the radio, so it need to look in the config space. If the config mutex was held by the config writing process while the radio was trying to get the channel number, then we'd get a deadlock. Signed-off-by: Keith Packard commit f1956ebadd7bf46b84a05a0c383b6404ca26b344 Author: Keith Packard Date: Sat Feb 27 15:10:16 2010 -0800 Leave .ihx files in the build directory too - easier to debug that way sdcdb wants the .ihx and .cdb files in the same directory, so humor it by copying the .ihx files to the src directory instead of moving them. Signed-off-by: Keith Packard commit bbf8c9f1748af3f1fac08ddf80ae98da2e9b5727 Author: Bdale Garbee Date: Fri Feb 26 15:21:12 2010 -0700 create a turn on script for lighting up TeleDongle v0.2 boards commit 461d4a1948e112ec7353caf88967391d876469dd Author: Keith Packard Date: Fri Feb 26 10:33:13 2010 -0800 Add LED test commit 5d7a3a5fbc0af4621c67a6fd51a9c9d5ae688fa5 Author: Keith Packard Date: Thu Feb 25 16:40:13 2010 -0800 Fix and document the ao-rawload --run flag This allows ram-based programs to be loaded and executed easily. Signed-off-by: Keith Packard commit 1e60deca147c85a064719dfad14ccabd1049bbbd Author: Keith Packard Date: Thu Feb 25 16:33:34 2010 -0800 Allow product names to have suffixes (like board revisions) When looking for a board by product name, just look at the prefix of the name instead of requiring an exact match. This will allow products to have board version suffixes. Signed-off-by: Keith Packard commit f4d5790a284e2d02dd7568fbca90402fa5ed1aea Author: Keith Packard Date: Thu Feb 25 16:32:57 2010 -0800 Add ao_radio_xmit to help test boards without flashing them. Signed-off-by: Keith Packard commit d7d551b0078acb1596a9b9023c3df6dbfa46213c Author: Bdale Garbee Date: Wed Feb 24 17:30:23 2010 -0700 update changelogs for Debian build commit 2f45953ee54034209a23c254e65da36e44cf075f Author: Bdale Garbee Date: Wed Feb 24 17:29:47 2010 -0700 un-muck changelog commit 540f86678853e7ea80ae91f3f2ec0ec88c5b1ca7 Author: Bdale Garbee Date: Wed Feb 24 17:27:51 2010 -0700 debugging commit cdccd92f6ed97be7385e84de5694064cb8f43946 Author: Bdale Garbee Date: Wed Feb 24 17:25:28 2010 -0700 conditionalize use of git on executability of /usr/bin/git binary commit 54dd7a200e6956aace5a580d4c4d6a10a13c654b Author: Bdale Garbee Date: Wed Feb 24 17:22:45 2010 -0700 update changelogs for Debian build commit 4b6b28530206c6fdbe46699b81746fbbcab5b148 Author: Bdale Garbee Date: Wed Feb 24 17:22:20 2010 -0700 see if this works commit c74958d3e8c5ce8006a9f9f6853238fce0c77432 Author: Bdale Garbee Date: Wed Feb 24 17:13:29 2010 -0700 move git-using variable declaration into the prebuild target commit cf091a7252eba09902a42a3cfe7b4d6a343907ce Author: Bdale Garbee Date: Wed Feb 24 16:44:44 2010 -0700 update changelogs for Debian build commit deccc10f0305c0cd02bf6317d6dc9d2ae38c3dac Author: Bdale Garbee Date: Wed Feb 24 16:43:32 2010 -0700 add gawk as a build dependency since strtonum is a gawk extension commit ac45da6e61597dcdb119b976f7301b2cc7fdced4 Author: Bdale Garbee Date: Wed Feb 24 14:57:26 2010 -0700 update changelogs for Debian build commit 24912821b3230b8357b9e0094cd69fa0bccc5513 Author: Bdale Garbee Date: Wed Feb 24 14:53:27 2010 -0700 update changelogs for Debian build commit 82fdbfe1229d1ea5e6906ea240d54b3da73d9a69 Author: Keith Packard Date: Sat Feb 20 21:35:43 2010 -0800 Must install .map files for ao-load to work ao-load uses the .map files to rewrite the serial number and other config parameters into the program flash. Signed-off-by: Keith Packard commit a5215c2bd9249a285fc834db0c453fb3e7daed87 Author: Keith Packard Date: Sat Feb 20 21:20:05 2010 -0800 Add back stack size checking to altos linking phase This verifies that the stack start specified during the compile will work with the resulting program Signed-off-by: Keith Packard commit 18eeb79026f7e5c54bf99435537c024427011a36 Author: Keith Packard Date: Sat Feb 20 21:05:45 2010 -0800 Quiet make output. This borrows ideas from the notmuch project to reduce the command line clutter seen when compiling or linking stuff. Signed-off-by: Keith Packard commit 004c2a9b7a4b44ef71ca60482573e8e9d8c6ce93 Author: Keith Packard Date: Sat Feb 20 20:36:08 2010 -0800 Update .gitignore files commit 84c93bb2fc4558a5e4654794ba90e730a84eaf67 Author: Keith Packard Date: Sat Feb 20 20:22:16 2010 -0800 Change altos build process to support per-product compile-time changes This creates per-product subdirectories and recompiles everything for each product, allowing per-product compile-time changes for things like peripheral pin assignments and attached serial devices. Signed-off-by: Keith Packard commit fd0a42e0e96dcb8ecc9e999f70bcf70692692af9 Author: Keith Packard Date: Sat Feb 20 20:21:07 2010 -0800 Change barometer conversion code to shrink conversion table commit 876e9a10b9096ead85fbe08ec9a6a0329cf7cbd4 Author: Keith Packard Date: Sat Feb 13 16:42:27 2010 -0800 Log GPS data on pad after boost detect. This wakes up the two GPS reporting tasks and gets them to report out any existing GPS data to the log file. To make sure the timestamps in that GPS data are accurate, this also records GPS time on receipt of the GPS data instead of when that is logged. Signed-off-by: Keith Packard commit c83615567b4567f3dc45a7f7b894943b45fbb65c Author: Keith Packard Date: Sun Feb 7 00:25:22 2010 -0800 Pull in a bit more data for filtering the start of the boost commit f8967607b3dda0c0ce7afe8bb077da2da5ed3dcd Author: Keith Packard Date: Sun Feb 7 00:24:56 2010 -0800 Compute daytime using GPS as time base commit 2a6350149407c7d2e7d143906c40c5e331248aeb Author: Keith Packard Date: Thu Feb 11 18:48:56 2010 -0800 Missing ao_mutex_put in gps_dump commit 9856b7c4397afcecc8f541af9a83824e817b3612 Author: Keith Packard Date: Sun Jan 10 16:31:50 2010 -0800 Switch to using internal cc1111 temperature sensor v0.2 has no temperature sensor, and several of the v0.1 boards didn't get a temperature sensor loaded. Use the internal temperature sensor on the cc1111 in all cases instead. Signed-off-by: Keith Packard commit 0c2533be15858774ef9381aa8c8344356fd5b971 Author: Keith Packard Date: Sat Jan 9 22:06:19 2010 -0800 Force idle mode by shorting the SPI clock to ground at boot time. This allows you to override the flight mode detection code in case the accelerometer calibration is broken somehow. Hold the SPI clock shoted to ground until the LED comes on, then remove it. Signed-off-by: Keith Packard commit 28346736a7799c0767e54511d9949cd61d35e471 Author: Keith Packard Date: Sat Jan 9 20:57:48 2010 -0800 Add simple gps dump command 'g' This just dumps out the data in a very simple format to verify the GPS receiver. Signed-off-by: Keith Packard commit a6082a8b4501ac4cb18584ace1f0c40e088e5484 Author: Keith Packard Date: Sat Jan 9 20:57:29 2010 -0800 Remove flash debugging printfs Signed-off-by: Keith Packard commit 05bb953830604721c9a49dd56256b86f3666b5ff Author: Keith Packard Date: Sat Jan 9 20:42:57 2010 -0800 Don't set ao_flash_setup_done until we're actually done. Because we're accessing this variable outside of the mutex, we need to make sure it isn't set until the data it covers has been initialized. Signed-off-by: Keith Packard commit 327e5e782958e516a7b7a786ab6c176b0decb8b8 Author: Keith Packard Date: Sat Jan 9 20:04:42 2010 -0800 Dump config block from read/write config and flash_status commands commit 05e5bb2d330b755967d06fb859585c81f5f5fbb5 Author: Keith Packard Date: Sat Jan 9 19:46:46 2010 -0800 Dump more flash parameters for the flash_status command commit d4c8895b349998e02e03ed83466a0ca7afb3d99b Author: Keith Packard Date: Sat Jan 9 17:57:52 2010 -0800 Add 'f' command to display flash status register contents Signed-off-by: Keith Packard commit c1334f712f01543adb10809bc1a3ca120e27290b Author: Keith Packard Date: Sat Jan 9 09:55:04 2010 -0800 Add at45db161d.h header file for new flash part. Forgot to add this when I added the driver. Signed-off-by: Keith Packard commit a0d4c1b06d27e850d233f8ddf8fe32912bf0ec8f Author: Keith Packard Date: Sat Jan 9 01:29:41 2010 -0800 Remove green LED and temp sensor from v0.2 code Signed-off-by: Keith Packard commit dc8d18736239b14c2ec48a40a01515912c5c25e6 Author: Keith Packard Date: Sat Jan 9 01:22:06 2010 -0800 Add AT45DBxx1D driver This driver supports the AT45DB011D through AT45DB321D DataFlash parts as found in TeleMetrum v0.2 Signed-off-by: Keith Packard commit 3bab7e66d25988f5d63ec139c8814a85b983f8f3 Author: Keith Packard Date: Sat Dec 19 20:32:18 2009 -0800 Remove dbg driver code from telemetrum/teledongle The only board with debug outputs is the TI dongle at this point, so the debug modules were disabled in TM and TD some time ago. Unfortunately, the code was not removed then. Signed-off-by: Keith Packard commit eddb82390a0ecb07ef83c04861993842906b03ab Author: Keith Packard Date: Sat Dec 19 15:31:36 2009 -0800 Ensure that ao_alarm waits at least the specified time Because the timer tick may happen soon, it's important to delay by another tick to ensure that we don't wake up early. Signed-off-by: Keith Packard commit 598d168bd6552c3756e4b0267de44147eadab9f6 Author: Keith Packard Date: Sat Dec 19 14:03:11 2009 -0800 Disable monitor mode before attempting radio test. If monitor mode is left active, then the radio lock will not be able to be acquired for the radio test. Signed-off-by: Keith Packard commit d4cf1446680d8b47396bcda338e8df7af395d102 Author: Bdale Garbee Date: Sat Dec 19 13:53:38 2009 -0700 update changelogs for Debian build commit 10d1bbcd9709a5eee8d50989215242b16feb7232 Author: Keith Packard Date: Sat Dec 19 11:34:16 2009 -0800 Use ao_radio_get/ao_radio_put in packet code. The ao_radio_get function both acquires the mutex *and* configures the radio channel and frequency. Failing to use this in the packet code would leave the radio frequency unconfigured. Signed-off-by: Keith Packard commit a15abc1882a3bdd2c980eed169f3b80337528390 Author: Bdale Garbee Date: Sat Dec 19 12:15:29 2009 -0700 update changelogs for Debian build commit bbb152c712801653374a8f82869e2e8bf41f7279 Author: Bdale Garbee Date: Sat Dec 19 12:05:40 2009 -0700 update changelogs for Debian build commit 7ac8efea5d60b81adccdc1e38ac4c13facfae7c9 Author: Keith Packard Date: Tue Dec 15 23:58:29 2009 -0800 Add --cal to man page commit 5481082b18226a0de6b377215b3b330bdbc4a6c6 Author: Keith Packard Date: Sat Dec 5 19:50:38 2009 -0800 Allow radio calibration to be set from ao-load This moves the initial radio calibration value into const memory where it will be used if no eeprom configuration value is available, either on an unprogrammed board with eeprom or a device without an eeprom. Signed-off-by: Keith Packard commit 46f03ab3145a61139c8ca6fc99e8f2798728b5a9 Author: Keith Packard Date: Sat Dec 5 15:36:12 2009 -0800 Re-order config values. Change frequency to cal Place more often used values at top, and consistently call the radio value 'calibration' instead of 'frequency'. Signed-off-by: Keith Packard commit bf29a62532fec12e6af2d2f3a6624882c863e933 Author: Bdale Garbee Date: Sat Dec 5 11:03:42 2009 -0700 update changelogs for Debian build commit cd49847f3125df1733f298b56a43e8027ab5ce05 Author: Keith Packard Date: Fri Dec 4 23:38:26 2009 -0800 Add radio calibration configuration. The crystal we use is only good for 20ppm, which generates a fairly significant error bounds at our RF frequency. This commit adds a configuration variable that sets the RF frequency control variable so that the output frequency can be adjusted. Signed-off-by: Keith Packard commit c671a3f31f54715284beef5baa4a72ca922e4018 Author: Keith Packard Date: Fri Dec 4 23:36:54 2009 -0800 Make ao_cmd_decimal produce both 32 and 16 bit values. ao_cmd_lex_u32 is produced in addition to ao_cmd_lex_i so that functions can easily read 32-bit values from the command line. Signed-off-by: Keith Packard commit e6d6ad66ce177eb6e49eaa04b1ecc6426f4bbdbf Author: Keith Packard Date: Fri Dec 4 23:35:40 2009 -0800 Remove send_serial and serial_baud commands. No longer useful, and they take up space. Signed-off-by: Keith Packard commit ce7325cefbbe91054c1e8174cf40a6c687f6694b Author: Bdale Garbee Date: Fri Dec 4 21:02:07 2009 -0700 update changelogs for Debian build commit 9a1d7dd78c07d18954ef620b6ed25d6701df21e2 Author: Keith Packard Date: Fri Dec 4 14:35:39 2009 -0800 Change default callsign to "N0CALL" commit 291e2004e77debdc1543912cf11043c849305de8 Author: Bdale Garbee Date: Thu Nov 26 11:18:37 2009 -0700 update changelogs for Debian build commit 40533095a96b6c6364eebdc4b7d53c4eabe72e9a Author: Bdale Garbee Date: Thu Nov 26 11:16:04 2009 -0700 update changelogs for Debian build commit ab1075e7219b02258c1613d93379582be4168947 Author: Bdale Garbee Date: Thu Nov 26 11:15:13 2009 -0700 change home URL in control file to be the AltOS page commit d34dcc5f3616e59ee90ed172770fe2a3eb1e0cac Author: Bdale Garbee Date: Thu Nov 26 10:40:07 2009 -0700 fix absolute path in debian/dirs, add Suggests for slim-altusmetrum commit ea40561b36519a5dcabedabe18672b79ea5e9993 Author: Bdale Garbee Date: Sun Nov 22 10:18:44 2009 -0700 update changelogs for Debian build commit d6ba07e885bdc62ba64719c9d8cc42fcecbcb09d Author: Keith Packard Date: Sun Nov 22 01:10:44 2009 -0800 Automatically extract flight number for eeprom and telem filenames. Extract flight number from either telemetry or eeprom files and use that in the resulting filenames. To ensure that files remain unique, add a new field, -seq-%03d. This is appended only when the sequence number is non-zero as it shouldn't occur in normal usage. This also eliminates some duplicate filename creation code in the library and aoview sources. Signed-off-by: Keith Packard commit 06cebd1026dc1bd6ee51526fa2d02905df3b3b37 Author: Keith Packard Date: Sun Nov 22 00:52:58 2009 -0800 ao-postflight: don't try to use missing gps sat data Signed-off-by: Keith Packard commit a9ada1b538af3308e1b22bd024d9204521184173 Author: Keith Packard Date: Sat Nov 21 22:12:21 2009 -0800 ao-postflight: compute barometric alt for each GPS position Print that to the --gps file, and use that in the --kml file for the altitude. Gives a very different picture of our flight tracks, presumably far more accurate (at least in altitude). Signed-off-by: Keith Packard commit b84b634d9ae8ce6ab1c02833a3ed8514404e1ca3 Author: Keith Packard Date: Sat Nov 21 22:11:45 2009 -0800 Don't crash if --plot isn't passed on ao-postflight command line Crashing is not nice. Signed-off-by: Keith Packard commit 2d77c18b15834046b7b79d49d87211828f2409e9 Author: Keith Packard Date: Sat Nov 21 21:10:09 2009 -0800 Convert telemetry file GPS satellite information in cc_log_read The satellite info wasn't being correctly converted from telemetry files to the data log structure, so ao-postflight was not seeing it. Signed-off-by: Keith Packard commit 1e7fb61700f1f6f2ed5fdbc4380d7187b0cd187b Author: Keith Packard Date: Sat Nov 21 21:09:03 2009 -0800 Fix --plot arg handling. Add -all option. The --plot file name handing is special as the library wants a filename instead of a stdio file pointer. Add a --all option that just creates all of the possible outputs. Signed-off-by: Keith Packard commit 199f0cecae22645140185238682b9e1aba0e5715 Author: Keith Packard Date: Sat Nov 21 20:36:20 2009 -0800 Make TD print 0000-00-00 for invalid dates. This 'shouldn't' happen, but in case it does, I want to know about it. Signed-off-by: Keith Packard commit 238d03462a56dc1b7c871608cb00f961a88c1b97 Author: Keith Packard Date: Sat Nov 21 20:35:22 2009 -0800 Make ao-postflight create filenames using input filenames. Instead of requiring the user to provide names for the various output options, just create them from the input name by replacing the extension. Signed-off-by: Keith Packard commit 1a3b4c02a01187f8b7b9a9c97712476d0007ab35 Author: Keith Packard Date: Sat Nov 21 19:52:26 2009 -0800 Document ao-postflight --gps and --kml options. These were missing from the man page, but included in the --help output. Signed-off-by: Keith Packard commit 80b23f3044a654d61212891a61fadb8a3a4e5572 Author: Keith Packard Date: Sat Nov 21 18:57:45 2009 -0800 Decode HDOP data from skytraq GPS The hdop data was getting dropped on the floor, but is rather useful when deciding if the GPS position is crazy or not. This reports HDOP * 5 (giving a useful range of .2-50). Signed-off-by: Keith Packard commit 8f036ee7cd30ce3ed2e5cc8501914a4c19b73875 Author: Bdale Garbee Date: Fri Nov 20 13:19:02 2009 -0700 update changelogs for Debian build commit 87e6f3e5c1688503ab8595912d8d6eb7139830b7 Author: Keith Packard Date: Fri Nov 20 12:16:37 2009 -0800 Eliminate SiRF state values from ao-view. With Skytraq not having any visible GPS state information, just remove this from the display. Signed-off-by: Keith Packard commit 8065b8146a31438e66f83c13b99281ec47439a73 Author: Keith Packard Date: Fri Nov 20 11:56:48 2009 -0800 Add GPS date/time output to ao-postflight. GPS date/time information was already being stored in the log, it just wasn't getting displayed by ao-postflight. Signed-off-by: Keith Packard commit 6894541e0ee144bfc689cc02d4ed333711d3b500 Author: Keith Packard Date: Fri Nov 20 11:55:28 2009 -0800 Reduce igniter firing time from 500ms to 50ms. Given that the system will brown-out with the longer pulse, it doesn't make sense to even try; failure at 50ms probably indicates a short. Signed-off-by: Keith Packard commit b75aa1c825b84bd7fa1578320fbc7e904c373a7d Author: Bdale Garbee Date: Thu Nov 19 21:43:13 2009 -0700 fix typo in comment commit c2f661b75ec035f6a3f700962290ef297f9ab0af Author: Bdale Garbee Date: Fri Nov 20 11:44:06 2009 -0700 update changelogs for Debian build commit b0d7e3f9c9322542e9b649bb6ad7f7e5bb99dffa Author: Keith Packard Date: Sun Nov 15 16:20:18 2009 -0800 Stop using SiRF state info. With the switch to the skytraq GPS unit, we don't have the same level of detail in the GPS stream, so stop reporting that in the telemetry stream, in the UI and writing it to eeprom. Signed-off-by: Keith Packard commit 524665fc221b0d483453c67b7211e282cebc8980 Author: Keith Packard Date: Sun Nov 15 16:04:41 2009 -0800 Add date to GPS data, captured from GPRMC packet. Pull the date out of the GPS stream and send it over the telemetry link and write it to the eeprom. Signed-off-by: Keith Packard commit 3ee279ba76c2a79d142c466f19ef758cf4c01d70 Author: Keith Packard Date: Sun Nov 15 15:59:01 2009 -0800 Add flight number to telemetry stream. This makes it easier to tie the telemetry and eeprom files together as they're now both labeled with serial and flight numbers, which should be unique. Signed-off-by: Keith Packard commit 6391c89bd5b89f5f46255b8365c658a873e5959a Author: Keith Packard Date: Sun Nov 15 15:53:01 2009 -0800 Switch order of serial/flight in ao-postflight summary commit 9b06e294e2777f69bcf5e98789c3f5477097d53b Author: Keith Packard Date: Sun Nov 15 15:51:58 2009 -0800 Enable telemetry receive in ao_view commit 4cffc9c4b079e39c8196ddbaf91129cda6df7f8b Author: Keith Packard Date: Sat Nov 14 22:24:37 2009 -0800 Share telemetry parsing code in cc library. ao-view had a private copy of the telemetry parsing code which included the ability to parse the newer version of that file. Those changes have been moved to the library version and the private copy removed. Signed-off-by: Keith Packard commit 0e0db8ca3af4c07bae909938486766c646bf580b Author: Keith Packard Date: Sat Nov 14 22:24:09 2009 -0800 Provide a dummy 'uninstall' target in the src directory. Signed-off-by: Keith Packard commit 1c654a9369294c9b8066c33f91161d8005b96680 Author: Keith Packard Date: Sat Nov 14 22:17:24 2009 -0800 Loosen tolerances for main->landed transition Detecting that the rocket has landed is required for the system to flush the eeprom log and re-enable the RDF beacon. This patch changes the landed state entry requirements for the accelerometer to require only that the accelerometer stay within a quarter of a g (down from 1/10g) and changes the testing interval from 20 seconds to 5 seconds. The requirement that the barometric altitude be within 1000m of the launch altitude and that the barometer change by no more than 0.05kPa are unchanged. Signed-off-by: Keith Packard commit 03092d1a72a9651711e22c58dca6d6aba5705c5e Author: Keith Packard Date: Sat Nov 14 16:35:12 2009 -0800 ao-postflight: fix sloppy gps sat data realloc code (was crashing). Realloc'ing the wrong data, and failing to set the realloc'ed size was causing ao-postflight to crash while reading long logs. Signed-off-by: Keith Packard commit adf656192441eb7f44792955c86e469145477e29 Author: Keith Packard Date: Thu Nov 5 22:11:59 2009 -0800 Return radio to telemetry settings when packet system closed. To receive telemetry after disabling the packet system, the radio must be reconfigured for telemetry mode. Signed-off-by: Keith Packard commit 83afdbdc154fe013bfe35ce5ecf1d61570b04ed6 Author: Keith Packard Date: Thu Nov 5 21:45:00 2009 -0800 Add reboot command. This resets the processor using the watchdog timer. Signed-off-by: Keith Packard commit 0358988ac0ee25a564d48af79b1c3fb0c0fe0a88 Author: Keith Packard Date: Thu Nov 5 21:44:31 2009 -0800 Add Watchdog Timer Control register definitions Signed-off-by: Keith Packard commit 4114210e0b813f4af99d0cb7755ad2ac2c4b120e Author: Keith Packard Date: Thu Nov 5 21:43:21 2009 -0800 Move ao_match_word from ao_ignite.c to ao_cmd.c This is a generally useful command line utility. Signed-off-by: Keith Packard commit 5a79a04ddb0b3ee64de34e366f71a0f6db509c01 Author: Keith Packard Date: Wed Nov 4 21:59:51 2009 -0800 Stop recording in ao-dumplog after receiving an invalid block If no samples in a block are valid, assume the flight log is over. Signed-off-by: Keith Packard commit 843ee489aac34ad6d81f55f1c85fb9eecc42d86b Author: Keith Packard Date: Wed Nov 4 21:59:12 2009 -0800 Flush pending input when switching to remote packet mode Any pending input would just confuse the application, so pull it off the link and dump it. Signed-off-by: Keith Packard commit 036400a2db303f3db3be7cc0426f88359c6bd2b1 Author: Keith Packard Date: Wed Nov 4 21:42:51 2009 -0800 Explicitly use USB I/O routines in packet code Using the implicit stdio functions (putchar/getchar/flush) would result in essentially random redirection of each, depending on whether the packet code had characters available when getchar was called. This would cause lockups in putchar. Signed-off-by: Keith Packard commit 3ece984f4d72b4f720a5efdfaad7cff77a93d676 Author: Keith Packard Date: Wed Nov 4 21:32:07 2009 -0800 In USB pollchar, wait for packet before re-checking USB out len This probably wouldn't actually cause a problem, but it seems more reliable to wait for a packet interrupt before re-reading the packet OUT len register. This could avoid spinning while waiting for a USB packet, which seems like a good thing. Signed-off-by: Keith Packard commit bc62bb254085cc705203b57260c04ac5e14c6611 Author: Keith Packard Date: Wed Nov 4 21:29:37 2009 -0800 In packet master, move USB flush from packet thread to echo thread This keeps the packet thread from blocking on USB and also makes the flush happen after every packet (slightly more USB traffic, but packets are slow anyway). Signed-off-by: Keith Packard commit 27ebaf8e13aed06bb1ea6e770f767495a02be6c5 Author: Keith Packard Date: Tue Nov 3 01:27:37 2009 -0800 Add ability to dump eeprom data over radio link. This adds a '-R' option to ao-dumplog to redirect the connection through a USB attached TeleDongle over the radio link to a remote TeleMetrum device. Signed-off-by: Keith Packard commit 1de322b960005c9a16051afa1881fadb00f4bcd6 Author: Keith Packard Date: Tue Nov 3 00:40:38 2009 -0800 Pass accel calibration over telemetry stream. Telemetry data format change. This allows the ground station to convert the accelerometer sensor values into acceleration and speed data. This requires a new telemetry data structure, and so TeleMetrum and TeleDongle units must be updated synchronously. ao-view will parse either telemetry stream, and the serial format from TeleDongle now has a version number to allow for future changes. Signed-off-by: Keith Packard commit b529e5e8998702986909111a457f3ce9932e1ccf Author: Keith Packard Date: Mon Nov 2 23:48:29 2009 -0800 ao_flight_test was using accel value for pressure too commit f57bea012d4fbca097df0d98fcd30eb4abd9701a Author: Keith Packard Date: Mon Nov 2 21:47:41 2009 -0800 Reformat ADC values to show all 16 bits commit 79718e798e96567f0ba11c61f187e432fdcf95ee Author: Keith Packard Date: Mon Nov 2 21:48:16 2009 -0800 Remove "f" command commit a4137263b69864c524d39c6ff88a0225fd06e79b Author: Keith Packard Date: Mon Nov 2 21:47:15 2009 -0800 Remove "d" command commit 47f510464907d2b9488109c96ade87a41d878842 Author: Keith Packard Date: Mon Nov 2 21:46:39 2009 -0800 Remove "l" command as ao-dumplong no longer uses it commit 144db05f6b286a0450d486f69ce192632a2c0656 Author: Keith Packard Date: Mon Nov 2 21:38:18 2009 -0800 Add two-point accelerometer calibration. Calibration now uses two values, one upside right and the other upside down instead of a single horizontal value. This allows the use of other accelerometers and compensates for variations in the divider circuit to provide more accurate data. commit 17611788aadc9460287145a340a7c18bf63766aa Author: Bdale Garbee Date: Mon Nov 2 16:54:06 2009 -0700 update changelogs for Debian build commit 7db9d86178ecfd58cc1c17ac9fcbdcfd2f13aaec Merge: b219801 f9de200 Author: Keith Packard Date: Mon Nov 2 15:47:40 2009 -0800 Merge remote branch 'origin/master' commit b219801fb0e5eaff7778d21701da977104522da3 Author: Keith Packard Date: Mon Nov 2 15:45:58 2009 -0800 Add ao_usb_pollchar to ao.h commit b92333ff5e75bf96804359e9fbf464d3b518bd95 Author: Keith Packard Date: Mon Nov 2 15:45:42 2009 -0800 Disable interrupts while removing tasks from task list commit d519564fd08d2defe1211de83ccbdfa3c7cfe702 Author: Keith Packard Date: Mon Nov 2 15:45:07 2009 -0800 Add more docs to the README file commit f9de20000794c97a04d5bc2476191864bd2af371 Author: Bdale Garbee Date: Mon Nov 2 16:00:11 2009 -0700 update changelogs for Debian build commit 127c3125e5a4b86b8f304bc2889e313688c3d83e Author: Bdale Garbee Date: Mon Nov 2 15:59:12 2009 -0700 update changelogs for Debian build commit 6b1e77569e2fed3c44606ed268421df5d3ed4020 Author: Bdale Garbee Date: Mon Nov 2 15:57:41 2009 -0700 update changelogs for Debian build commit 8203bfa58af32a1d07a44c1c151b200df0b65f15 Author: Bdale Garbee Date: Mon Nov 2 15:56:42 2009 -0700 de-version the libreadline-dev build dependency commit 0b483233118673cbc2cda1be6acd379df82bc95a Merge: ca5d323 550482d Author: Keith Packard Date: Sun Nov 1 20:59:02 2009 -0800 Merge remote branch 'origin/master' into skytraq commit ca5d323a3d206050d95f52a61e92c69e1f54e7b5 Author: Keith Packard Date: Sun Nov 1 20:57:03 2009 -0800 Enable packet-based communcation to command processor This splits the packet code into master/slave halves and hooks the slave side up to the getchar/putchar/flush logic in ao_stdio.c Signed-off-by: Keith Packard commit 6c1a9ce16b966a21c885bf3be31cbcb85368b3fa Author: Keith Packard Date: Sat Oct 31 01:30:22 2009 -0700 No need to wakeup &ao_tick_count now commit cd0d495d7ef276956e730196476daa70a4359918 Author: Keith Packard Date: Sat Oct 31 01:20:26 2009 -0700 Poke master to speed up packet rate when things are busy commit 442b1ef18c8320d4e5329dc92bb5268a36058fc5 Author: Keith Packard Date: Sat Oct 31 01:19:41 2009 -0700 Use ao_alarm for ao_delay so it can be easily interrupted commit 4f7ed9ff484778381db647c27d2a34d0cadec41e Author: Keith Packard Date: Fri Oct 30 23:53:03 2009 -0700 Do more flushing in packet test code commit 6a7aa1810a90a9216160aec55ec4bd02b3240e1b Author: Keith Packard Date: Fri Oct 30 23:52:44 2009 -0700 Add RFIM register commit bf65e0b2a1299b49adc2d339ab9d9c7599aded9e Author: Keith Packard Date: Fri Oct 30 23:52:22 2009 -0700 Send SYN packet to set sequence numbers commit d46797e5c08d4955d516458185e2cfb51ee2d567 Author: Keith Packard Date: Fri Oct 30 23:51:38 2009 -0700 Use ao_radio_done to wait for TX to completely finish with packet commit c5ec6fcfa1bd17aad0f85d2fbe603f1d125836e6 Author: Keith Packard Date: Fri Oct 30 23:50:54 2009 -0700 Switch packet code from timer thread to ao_alarm commit b428faf74ae145126ec1da972028fcfe0b4b2b18 Author: Keith Packard Date: Fri Oct 30 23:48:36 2009 -0700 Remove reason from ao_dma_abort commit 73db30b2f9128c37dc7fa075793a8862814ce044 Author: Keith Packard Date: Fri Oct 30 23:46:21 2009 -0700 Add ao_alarm commit 251b0971f049cbf2f8db79a32729d47441ce65f3 Author: Keith Packard Date: Fri Oct 30 23:45:43 2009 -0700 Wait for TX to finish sending data commit 9b31f07fe3556896b3e997bba156e30ef5777a80 Author: Keith Packard Date: Fri Oct 30 23:43:52 2009 -0700 Add radio carrier command commit 7b14c3e609749f4fc00dbd660541375048535218 Author: Keith Packard Date: Fri Oct 30 16:39:15 2009 -0700 Initial packet bits. Just testing transmission commit 690fc263516d8beb6b24e86fbcd6588f42ce4e5c Author: Keith Packard Date: Wed Oct 21 17:18:49 2009 +0900 Add keyhole-markup generation for ao-postflight. This lets you see the flight path in googleearth. Signed-off-by: Keith Packard commit b657aa209b9ea3b3efd33a940283b3ba60a169af Author: Keith Packard Date: Fri Oct 16 12:59:53 2009 +0900 Add ao_wake_task and ao_exit ao_wake_task signals a specific task to wake up. ao_exit terminates the current task. Signed-off-by: Keith Packard commit d709a0688eff84e25e24d755850ef045d6b0c3de Author: Keith Packard Date: Fri Oct 16 12:56:45 2009 +0900 Save some DSEG space by marking cmd functions __reentrant __reentrant causes the compiler to place args and locals on the stack instead of in the data segment. Signed-off-by: Keith Packard commit 550482d953c491a5ede9f2d243493afb13289898 Author: Bdale Garbee Date: Mon Oct 12 16:58:46 2009 -0600 update changelogs for Debian build commit 2de548f45d0f50b558acc83f57e1e2fc1223ab92 Author: Bdale Garbee Date: Mon Oct 12 16:58:19 2009 -0600 oops, forgot to specify the repo to push to commit 68008ac11c2735ca53a1b474324df43f2f1d5cdd Author: Bdale Garbee Date: Mon Oct 12 16:57:33 2009 -0600 update changelogs for Debian build commit 513328ac5f7c25f9ee144ab6befbea60d69eed1a Author: Bdale Garbee Date: Mon Oct 12 16:56:50 2009 -0600 automate push of updated and tagged master branch during debian/rules prebuild commit 67bf7d388a6dd2dbf65575bf4f0423ad355b4f2f Author: Bdale Garbee Date: Mon Oct 12 16:54:44 2009 -0600 update changelogs for Debian build commit 23bc21a93ccb9f35917f283ac5df6ce0870df71a Author: Bdale Garbee Date: Mon Oct 12 16:54:16 2009 -0600 undue damage from partial build commit 7da56ad8576ef212ffb6cb573bdaf578453e3fe0 Author: Bdale Garbee Date: Mon Oct 12 16:52:52 2009 -0600 add support for tagging git repository on each Debian package build commit 8d4aa4ee54f85f4951cdd7293d58aaa405cfcdc5 Author: Bdale Garbee Date: Mon Oct 12 16:49:34 2009 -0600 update changelogs for Debian build commit 241a860fe856b1dfad6e792736313648300d5c24 Author: Bdale Garbee Date: Mon Oct 12 16:48:43 2009 -0600 flush repetitive junk out of debian/changelog, and update the prebuild target in debian/rules to put git commit details into the Debian changelog commit 6c4cdc927b43736b39be29d23ac3dc723f69e4d6 Author: Bdale Garbee Date: Mon Oct 12 15:57:19 2009 -0600 update changelogs for Debian build commit c57bd7fd2f80e50b0b4c87fccb024ab07c93773d Merge: adf8764 2b76572 Author: Bdale Garbee Date: Mon Oct 12 15:57:08 2009 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 69b6f6bb465163cf767bb68e0e4a716d8ad2b39c Merge: bc77da6 2b76572 Author: Keith Packard Date: Sat Oct 10 17:16:21 2009 -0700 Merge branch 'master' into skytraq commit 2b765728ce177e26899f6feef00bfdf6aeaf2678 Author: Keith Packard Date: Sat Oct 10 17:15:38 2009 -0700 Add apogee igniter delay. Provide for a delay after apogee before the drogue charge is fired. This allows TM to be used as a back-up altimeter. Signed-off-by: Keith Packard commit bc77da68c9cb7d4cca483eadbbb7e9ccf71c0060 Merge: 46cccf6 8f7ea3d Author: Keith Packard Date: Sat Oct 10 15:09:48 2009 -0700 Merge branch 'master' into skytraq commit 8f7ea3de7037f40b0ff462b60d503c19431ae62b Author: Keith Packard Date: Sat Oct 10 15:08:14 2009 -0700 Report igniter continuity in pad/idle mode via beeper one short beep = drogue two short beeps = main three short beeps = both one long warble = neither In idle mode, it does this just once. In pad mode, it keeps testing and reporting. Signed-off-by: Keith Packard commit adf8764bc4591795ba4e618ccbd6393fc6ce6450 Author: Bdale Garbee Date: Sat Oct 10 15:11:23 2009 -0600 update changelogs for Debian build commit 541da6f3bbf81be93dfe3c01f7c8cfd757b28a2b Merge: dfc73cb 5f26ad6 Author: Bdale Garbee Date: Sat Oct 10 15:05:50 2009 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 46cccf62fb40514b5930fcb2ffdaf2735415c764 Merge: fb8f3fe 5f26ad6 Author: Keith Packard Date: Sat Oct 10 14:00:03 2009 -0700 Merge branch 'master' into skytraq commit 5f26ad663b3f60dddc9d967206e365f45dc4acd1 Author: Keith Packard Date: Sat Oct 10 13:58:16 2009 -0700 ao-dumplog: switch to 'e' command, display progress Using the 'e' command allows additional checking of the data, including end-to-end checksums and detection of missing data. Progress is displayed by showing the recorded flight state along with a '.' for each eeprom block read. Signed-off-by: Keith Packard commit fb8f3fee6a1bab1e46d782e84405845cee2dadb4 Merge: 22856cf b8fc397 Author: Keith Packard Date: Sat Oct 10 13:41:00 2009 -0700 Merge branch 'master' into skytraq commit b8fc3975bd92037a0cf53b0ff2b0e05ce0ba668f Author: Keith Packard Date: Sat Oct 10 13:39:01 2009 -0700 Send 0-length IN packet to flush USB after full packet USB bulk transfers are a sequence of maximum-sized packets followed by a short packet, which signals the end of the transfer. When the last packet of the transfer would be a full-sized packet, an additional packet of zero length is sent to signal the transfer end. Signed-off-by: Keith Packard commit 22856cf8bb0f5e1f37c9b774132d9ef6934526ed Merge: 2f76034 e29961f Author: Keith Packard Date: Sat Oct 10 11:44:20 2009 -0700 Merge branch 'master' into skytraq commit e29961fdb2a48874c895829880eadbf13e094c0c Author: Keith Packard Date: Sat Oct 10 11:43:31 2009 -0700 Add channel menu to ao-view. Sets radio channel when TD is connected, saves selected channel in gconf database. Signed-off-by: Keith Packard commit 2f7603490a169df8f18b565db4fa967832ffc9bd Author: Keith Packard Date: Fri Oct 9 22:48:29 2009 -0700 Build two versions of TM, one for SiRF, one for SkyTraq This creates two separate images, depending on which GPS unit is connected. Signed-off-by: Keith Packard commit 33b0b6f2f2e07de105619a7b463226d2813152ab Author: Keith Packard Date: Fri Oct 9 22:02:40 2009 -0700 Add support for the SkyTraq GPS unit This is a build-time option selected by hacking the Makefile at present. Signed-off-by: Keith Packard commit a3771bfc5ce740f9d89193e9f8b1d7987aa57264 Author: Keith Packard Date: Tue Oct 6 20:06:00 2009 -0700 ao-view: fix snd_pcm_open return checking I don't know how this code was supposed to work before... Signed-off-by: Keith Packard commit ac4b8a73848f434999a532eab4665253c267c597 Author: Keith Packard Date: Tue Oct 6 20:05:36 2009 -0700 ao-postflight: dump out GPS signal data Signed-off-by: Keith Packard commit dfc73cba1bee8b121e00e8cba45e7dfaaf79e9d8 Author: Bdale Garbee Date: Mon Sep 21 22:46:59 2009 -0700 update changelogs for Debian build commit 459ff3d377297f80ee2fba0df0a29ff6603467a1 Author: Bdale Garbee Date: Mon Sep 21 11:00:32 2009 -0700 update changelogs for Debian build commit 327c64305a59f48ababf19875874a550af6b9cef Merge: c8a81a4 74f0fb4 Author: Bdale Garbee Date: Mon Sep 21 11:00:22 2009 -0700 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 74f0fb4dd189abc1d5027c64fa5a648a6003285a Author: Keith Packard Date: Sun Sep 20 13:33:59 2009 -0700 make bit-banging reset script actually reset commit 7ea371a09385e2a93199f78685e8cb86793ed104 Author: Keith Packard Date: Sun Sep 20 13:33:26 2009 -0700 Add --gps option to ao-postflight commit bc7ccb339e538a0e6120db0e5c0d9130c565e0dd Author: Keith Packard Date: Sun Sep 20 13:32:59 2009 -0700 ao_rawload: Don't reset after we finish loading commit c8a81a419f7f2331624f90bd6c107a86f6b04451 Author: Bdale Garbee Date: Sun Sep 20 09:21:00 2009 -0600 update changelogs for Debian build commit df42ccaaf468cdc5d93cbd1c001f58df58419722 Merge: 0b24e40 078e9cd Author: Bdale Garbee Date: Sun Sep 20 09:19:28 2009 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 078e9cdbdb388b22c6151f76ff0660fc14b8ef55 Author: Keith Packard Date: Thu Sep 10 11:53:06 2009 -0700 Plot raw accel data for the motor accel section. This shows a short sequence of accelerometer data without any filtering. Signed-off-by: Keith Packard commit 8b485d937ff148848ebda7f9ca6be29bb1de1f16 Author: Keith Packard Date: Sun Sep 6 21:02:48 2009 -0700 Show acceleration only during boost phase. We're interested in motor performance; the rest of the flight is boring, after all. Signed-off-by: Keith Packard commit 9e660315e1bd2bf71ab1c0574e895e1f7608a58f Author: Keith Packard Date: Sun Sep 6 21:01:44 2009 -0700 Fix cc_period_make to not get stuck on samples with matching time When two samples have matching times, step to the second one; otherwise, we'll get stuck forever. Signed-off-by: Keith Packard commit 932f1539b38567e565fd484171c13539b1467308 Author: Keith Packard Date: Sun Sep 6 20:26:17 2009 -0700 Color plots, integrate only flight portion of data. Telemetry files have piles of pad data which shouldn't be integrated into the velocity data as it tends to generate huge values from the noise of the sensor. Also make the data lines colored to keep them visually distinct from the rest of the plot image. Signed-off-by: Keith Packard commit 9177f5f4e9d832558ddd9ab227c4511f6201e7e5 Author: Keith Packard Date: Sun Sep 6 18:11:24 2009 -0700 Update usage and man page for ao-postflight commit 0b24e4034f93010372a3d084668d10f0e4a2c2e1 Author: Bdale Garbee Date: Sun Sep 6 18:01:20 2009 -0600 update changelogs for Debian build commit a5e94aa0677070a051714443cf7fd7e2b5e90269 Author: Bdale Garbee Date: Sun Sep 6 17:59:47 2009 -0600 need a run-time dependency to pull in the cairo module commit 97acef95cc9843998963921459fdd71dd7eaa6b4 Author: Bdale Garbee Date: Sun Sep 6 17:48:23 2009 -0600 update changelogs for Debian build commit 3f95a5abbf8ada70328ced45fbb2781ed1cb3d29 Author: Bdale Garbee Date: Sun Sep 6 17:48:10 2009 -0600 more build deps for plotting lib commit 9d7e96e323d652de08b2f2a73e0eb3c321080185 Author: Bdale Garbee Date: Sun Sep 6 17:47:56 2009 -0600 update changelogs for Debian build commit ae4e131b61244e06020b82919e31e05dd7dba88f Author: Bdale Garbee Date: Sun Sep 6 17:46:39 2009 -0600 update changelogs for Debian build commit 37e6c9a492a1d51373bf9333fb3172e0c377720f Merge: d256f82 2e6686b Author: Bdale Garbee Date: Sun Sep 6 17:46:10 2009 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 2e6686b1e183c66188ea447b8a54e4c29402443b Author: Keith Packard Date: Sun Sep 6 16:45:47 2009 -0700 Use plplotd instead of plplotd-gnome2 commit d256f8204e9fce53ae4309562bb4c0cde1fae43e Merge: 0fc344d 32d3536 Author: Bdale Garbee Date: Sun Sep 6 17:34:08 2009 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 32d3536706324808df6cd02248a236302b831571 Author: Keith Packard Date: Sun Sep 6 16:24:35 2009 -0700 Add plots to ao-postflight using the plplot library It's not perfect, but it generates .svg plot output. Signed-off-by: Keith Packard commit 0fc344dfc031a8b1eef7cc40efb1d5ba7782269d Author: Bdale Garbee Date: Sun Sep 6 14:15:57 2009 -0600 update changelogs for Debian build commit 4b0de757874c0ecaf38e3dfd3beefc398150e3d5 Merge: 773c4ff d0eac98 Author: Bdale Garbee Date: Sun Sep 6 14:15:53 2009 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit d0eac989b1ffc8ae30ba12da403eb4bf1ad42d6b Author: Keith Packard Date: Sun Sep 6 13:15:10 2009 -0700 Don't look at NULL strings (summary_name) Signed-off-by: Keith Packard commit 73f4a57239f770aff603b961169c0e2cfe2c276b Author: Keith Packard Date: Sun Sep 6 13:08:54 2009 -0700 Use pressure speed for drogue and beyond states. Fix differentiation time. Drogue state should always use pressure speeds. Differentiation code was using centi-seconds instead of seconds. Signed-off-by: Keith Packard commit 773c4ffbc1d2e02eb02cfa543a077a408986da30 Author: Bdale Garbee Date: Sun Sep 6 14:05:55 2009 -0600 update changelogs for Debian build commit 45ede4a4b203ef9da5bf05c49cb9c5a2e6382ec5 Merge: 45e2938 e35e485 Author: Bdale Garbee Date: Sun Sep 6 14:05:51 2009 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit e35e485ffe6b26034788ab295121bc2693b7eec1 Author: Keith Packard Date: Sun Sep 6 13:04:31 2009 -0700 Initialize summary_name and detail_name so stuff appears on stdout. Uninitialized variables lead to mysterious results. Signed-off-by: Keith Packard commit 45e2938121411d1fc9b3aec3fdeaaeb3c90db5ed Author: Bdale Garbee Date: Sun Sep 6 14:02:14 2009 -0600 update changelogs for Debian build commit d42ebf0661ecf15455e5051de1e16ae66f8dd857 Merge: 384dbe9 7a19aac Author: Bdale Garbee Date: Sun Sep 6 14:02:09 2009 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 7a19aac5e881e635962a64fff73027ca2143b96f Author: Keith Packard Date: Sun Sep 6 12:51:48 2009 -0700 Add DSP code to filter data, allowing for integration/differentiation This adds the computation of speed from both accelerometer and barometer measurements and then presents a periodic flight profile using filtered data as a detailed flight record. Signed-off-by: Keith Packard commit 384dbe9fc7fa8e4e5dceec5e150f0f1d3383bbdc Author: Bdale Garbee Date: Sun Sep 6 10:40:06 2009 -0600 update changelogs for Debian build commit 35c54b3a278fa9bc2bc7f4b5ee04866697c93ba0 Merge: 4f8eff7 6d018ab Author: Bdale Garbee Date: Sun Sep 6 10:39:23 2009 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 6d018ab933832e2d80bb1564c339d9fb18b57be2 Author: Keith Packard Date: Sat Sep 5 22:45:49 2009 -0700 Handle vageries of .telem files in ao-postflight Telem files have multiple entries of the same state, and sometimes long gaps between recordings. Deal with this as best as possible. Signed-off-by: Keith Packard commit c46e832b28820d7c5be4efaacbbd7c0607927fe5 Author: Keith Packard Date: Sat Sep 5 22:03:31 2009 -0700 Add simple post-flight analysis tool (ao-postflight) This tool reads either an eeprom or telem log file and displays some rudimentary data (max accel/alt for each flight stage). Signed-off-by: Keith Packard commit 26f56b51bd11aa91f1d77b81827b49c28cb6ec5f Author: Keith Packard Date: Sat Sep 5 00:29:26 2009 -0700 Add ao-dumplog to capture flight log from command line This duplicates the functionality of the flight log stuf in ao-view, except from the command line where it belongs. Signed-off-by: Keith Packard commit 73adae3661160d410dcc802873b530d255c210e5 Author: Keith Packard Date: Fri Sep 4 15:30:22 2009 -0700 Add --device/-D support to the command line tools and manuals Use the new cc_usbdevs_find_by_arg function to locate suitable target devices connected via USB. Signed-off-by: Keith Packard commit 4f8eff7401ee2d8092ab36fa33411f9b23dda880 Author: Bdale Garbee Date: Fri Sep 4 16:03:55 2009 -0600 update changelogs for Debian build commit 332b056459b1352e233a8bf5f08498df12d32160 Author: Keith Packard Date: Fri Sep 4 15:01:32 2009 -0700 'fix' ao-eeprom to read two blocks at once. Work around kernel bugs. The kernel appears to leave serial data undelivered at times. Reading two blocks at once appears to make it relinquish the queued data. Signed-off-by: Keith Packard commit df88ae4c5f229efcc0ea5cb0a81fc2bb8f96fea2 Author: Keith Packard Date: Fri Sep 4 14:23:02 2009 -0700 Add 'ao-list' utility to show attached AltOS devices Signed-off-by: Keith Packard commit 0935d6a7e907e20381a42882ae728051f9bece02 Author: Keith Packard Date: Fri Sep 4 14:21:19 2009 -0700 Parse the USB serial number as an integer. AltOS devices use simple integer serial numbers, so parse the USB value as such to make matching values more forgiving. Signed-off-by: Keith Packard commit 0c771d999914f9d17c723900f2987acc45fd0fbb Author: Keith Packard Date: Fri Sep 4 13:00:02 2009 -0700 Move usb scanning code to ao-tools library This will allow the scanning code to be used by the command line tools as well as the ao-view GUI. Now that ao-view depends on the ao-tools library, it has been moved to the ao-tools directory as well. Signed-off-by: Keith Packard commit 15341b6e6dcf52df083d6aa37ef881ea6ad48ee5 Author: Keith Packard Date: Fri Sep 4 12:25:37 2009 -0700 Set all of the values to reset the radio for telemetry Was sizeof(rdf_setup) instead of sizeof(telemetry_setup) when resetting the radio back to telemetry data mode from rdf mode. With the length value removed from the rdf config, these two arrays are no longer the same length, and so the last config value was not set leaving the radio sending garbage. Signed-off-by: Keith Packard commit fee46389b70a624ab5b1128a8b4c3083c7747bcb Author: Keith Packard Date: Fri Sep 4 11:46:55 2009 -0700 Make RDF beacon only run on pad and after landing. It's pretty much impossible to RDF the rocket during flight, and it interferes with the telemetry data stream. Leave it enabled on the pad so that radios can be tested, and then re-enable it once the rocket has landed. This patch also turns the rdf 'on' time into a parameter so it can be changed, and then sets that parameter to 500ms, once every 5 seconds. Signed-off-by: Keith Packard commit 54545640b0db7747137655f84bc67fd290ecb904 Author: Keith Packard Date: Fri Sep 4 11:45:52 2009 -0700 Add back the RDF tone generator Tracking the rocket on the ground may be easier using tones than using the digital data stream, so we'll try that and see what we think. This reverts commit 3a3bfd471a868d546d83cdc431b53c8f5208edb9. Signed-off-by: Keith Packard commit 9fafee109e96435c96639b21211cac0500673a63 Author: Bdale Garbee Date: Wed Sep 2 23:18:15 2009 -0600 update changelogs for Debian build commit cb4a73f3b65ba72f645fd37ab8712829c9537bf8 Merge: 9ddd869 e2e449d Author: Bdale Garbee Date: Wed Sep 2 23:17:37 2009 -0600 Merge commit 'origin/master' commit e2e449d5c23356e913f312de1fb2611a9dd5a352 Author: Keith Packard Date: Wed Sep 2 22:01:52 2009 -0700 Remove bit-banging debug support from TM board builds Our current TM boards don't have the wires to do bit-banging to another cc1111 board, so it doesn't make sense to fill up their flash with useless code (and the 'help' text with useless commands). Leave this to the TI board until we have boards that can serve as debug dongles. Signed-off-by: Keith Packard commit acea083d80e1ecc4287083519ea666964016b257 Author: Keith Packard Date: Wed Sep 2 22:00:37 2009 -0700 Make the ao_log_record structures 8 bytes again. When the GPS signal strength data was added, the structure was accidentally extended to 9 bytes, making all log records 9 bytes long. While not a serious problem, this left log records spanning across eeprom block boundaries, which seems like a bad plan. Signed-off-by: Keith Packard commit 7d39f17684feb49ac8a0017902158f298696e37c Author: Keith Packard Date: Wed Sep 2 21:57:54 2009 -0700 Make eeprom reads and writes across block boundary work Reading and writing across the block boundary was not stepping the eeprom position after the partial i/o operation at the end of the first block. This meant that the operation would re-use the end of the previous block, either re-reading or re-writing it. Signed-off-by: Keith Packard commit 9ddd8696b4004ccc03238d95a8c2a1d07075e0fb Author: Bdale Garbee Date: Mon Aug 31 16:48:03 2009 -0600 update changelogs for Debian build commit 6926c4ab5d87a8f2eb4fcde2c673fb3a4639e115 Author: Bdale Garbee Date: Mon Aug 31 16:47:44 2009 -0600 pixmap file should not be executable commit 1495e2f27acde3743c3764a0c31ee082224d6c64 Author: Bdale Garbee Date: Mon Aug 31 16:42:55 2009 -0600 update changelogs for Debian build commit c8c5b7963babe8eb16e2651fba9cd2c8d1cba74e Author: Bdale Garbee Date: Mon Aug 31 16:42:37 2009 -0600 deliver an icon for the Debian menu system commit 591b99c232e780246fc07841c09c8c4e7835facb Author: Bdale Garbee Date: Mon Aug 31 16:26:00 2009 -0600 update changelogs for Debian build commit b34474c1f3083e73b7184d519f54d4c8031836fd Merge: 8df1697 0d65bff Author: Bdale Garbee Date: Mon Aug 31 16:25:32 2009 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 6358041f846ba9a20fa650c367d907dc4336e54c Author: Keith Packard Date: Sat Aug 22 13:38:56 2009 -0700 Enable GPS degraded mode, set 10 sec degraded timeout. No reason not to let the GPS report solutions whenever it likes, let's see how this works. Signed-off-by: Keith Packard commit 0d65bff443c17d4d98c18b620ec075ab66b30efd Author: Keith Packard Date: Fri Aug 21 10:47:46 2009 -0700 Turn off GPS tracking data when not present in data stream Signed-off-by: Keith Packard commit 8df169791835510d96c11a3b0aa3cc5b79fa7fde Author: Bdale Garbee Date: Wed Aug 19 02:21:23 2009 -0600 update changelogs for Debian build commit 42ab6d52540d0326ef89e9d57954b08248558468 Author: Bdale Garbee Date: Wed Aug 19 02:21:06 2009 -0600 fix location for delivery of sources.list fragment commit 977f5dc0bc7c666dcc1f21db77416efca0d696aa Author: Bdale Garbee Date: Wed Aug 19 02:11:11 2009 -0600 update changelogs for Debian build commit 8d4d6655f1b4c2fbc522fd255bfb75406e5ddaef Author: Bdale Garbee Date: Wed Aug 19 02:11:00 2009 -0600 oops, aoview is now ao-view! commit b9a97aea65f871fd287bc0bb566d8664766f4afd Author: Bdale Garbee Date: Wed Aug 19 02:07:16 2009 -0600 update changelogs for Debian build commit 21e3dd0affac89919e5d0e29c6e9eb1eacb51801 Author: Bdale Garbee Date: Wed Aug 19 02:06:49 2009 -0600 enable support for Debian menus commit 0087c1776e0253fc2bd3b86f15bf9d1b32bdc45a Author: Bdale Garbee Date: Wed Aug 19 00:52:57 2009 -0600 update changelogs for Debian build commit 4486d9156e19e4280b42bcd422d81d04f2d04a92 Merge: dd09f0b 33edd62 Author: Bdale Garbee Date: Wed Aug 19 00:49:24 2009 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 33edd62992a32b0ec8ca66d879fa300871db5937 Author: Keith Packard Date: Tue Aug 18 23:38:16 2009 -0700 Update ao-view to add GPS satellite tracking data This adds another column to the display to hold per-satellite GPS tracking data and a count of the visible and locked sats. Signed-off-by: Keith Packard commit 29687cbd462a332d9a36ed87500c5b737dcae3f4 Author: Keith Packard Date: Tue Aug 18 22:35:15 2009 -0700 Handle GPS satellite tracking data SiRF message #4 includes signal strength and GPS engine state for each of the satellites being tracked. This data is now parsed and sent to eeprom and the radio. Signed-off-by: Keith Packard commit dd09f0bc2b950c00f3b489878cd69ad8a003f46c Author: Bdale Garbee Date: Tue Aug 18 21:57:01 2009 -0600 update changelogs for Debian build commit cd5ce661e2a8f9694933358ccb5b916fbed089c2 Author: Bdale Garbee Date: Tue Aug 18 21:49:39 2009 -0600 add support for building Debian package commit d996aa9b32fb0eb385bd3d158256c29788a42fe3 Merge: b3b2d3c 7d4ceb7 Author: Bdale Garbee Date: Tue Aug 18 18:56:09 2009 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit 7d4ceb75a454e6c9b3fe0bd934fadcb5104dea36 Author: Keith Packard Date: Tue Aug 18 17:55:22 2009 -0700 Add ao-ejection.1 man page Document the input requirements and output format Signed-off-by: Keith Packard commit b3b2d3c475a135084b5628c730fc6fca1ba0817b Merge: 4685fc5 da12b89 Author: Bdale Garbee Date: Tue Aug 18 18:36:03 2009 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos commit da12b89fb056a68e65ba363fef91d266727cb685 Author: Keith Packard Date: Tue Aug 18 17:30:43 2009 -0700 Create ChangeLog from git log commit 7d69e2b3715faed10ce21ad562fc4d25dfc5f9c1 Author: Keith Packard Date: Tue Aug 18 17:29:29 2009 -0700 Fix ao-bitbang examples to not have . in the first column commit 4685fc541466afbeefc151bcb64cd054739c048b Merge: 1c2a0b6 c29275b Author: Bdale Garbee Date: Tue Aug 18 18:09:38 2009 -0600 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos Conflicts: ao-tools/ao-bitbang/Makefile.am ao-tools/ao-eeprom/Makefile.am ao-tools/ao-load/Makefile.am ao-tools/ao-load/ao-load.c ao-tools/ao-rawload/Makefile.am commit c29275b72438637d46d7a50742882d2736eb176a Author: Keith Packard Date: Tue Aug 18 15:21:57 2009 -0700 Add manual pages for remaining commands. Manuals written for ao-bitbang, ao-eeprom, ao-load, ao-rawload and ao-view. Manual for ao-dbg updated to reflect program name change. Signed-off-by: Keith Packard commit 9b03d620722dc54630539afba40720c30de69b2d Author: Keith Packard Date: Tue Aug 18 12:19:31 2009 -0700 Use --tty/-T on command line to specify target device Also, use the ALTOS_TTY environment variable in all tools. Note that the magic value of "BITBANG" switches the library to connecting through a CP2103 instead. Signed-off-by: Keith Packard commit 7c790fe859dff062692964338091ffbbcdf63257 Author: Keith Packard Date: Tue Aug 18 12:40:24 2009 -0700 Rename tools to ao- Use a consistent prefix to make it easier to remember which programs belong to this package Signed-off-by: Keith Packard commit 1c2a0b6653623b689d68d7349a6b2dce3e20a4a6 Author: Keith Packard Date: Tue Aug 18 13:36:54 2009 -0700 re-add debugger sources commit 9a9cce5510b87252f863239ac807b9fb4395b288 Author: Keith Packard Date: Tue Aug 18 12:19:31 2009 -0700 Start working on using getopt for the tty name commit 9789ca5e8caa9a013e804f307b9da380e147bd75 Author: Keith Packard Date: Tue Aug 18 12:40:24 2009 -0700 Rename tools to ao- Use a consistent prefix to make it easier to remember which programs belong to this package Signed-off-by: Keith Packard commit a5782398d968e7cb11f7203afada7c216f233b3b Author: Keith Packard Date: Tue Aug 18 11:34:28 2009 -0700 Remove unused cctools code paths for old libusb and cp2103 ioctls. Communication with the CP2103 board has gone through three revisions, first using ioctls supported by the CP2103 kernel driver, then using the old synchronous usb library and now using the newer libusb asynchronous interface. There's no reason to keep shipping the old stale code now that the new stuff works reliably. Signed-off-by: Keith Packard commit 7cba411de0780c65e3490ab67186a514f0ea42ec Author: Keith Packard Date: Mon Aug 17 20:47:31 2009 -0700 test for sdcc, nickle and readline Signed-off-by: Keith Packard commit f48dcffae761700355a17b59345d55a60703f0c4 Author: Keith Packard Date: Sun Aug 9 20:43:10 2009 -0700 Sync USB data after each memory write command This makes sure we flush the USB link often enough for the other end to keep up. Signed-off-by: Keith Packard commit cd5456f18e4b39ad76d5549df91a0e0cfb18a2e9 Author: Keith Packard Date: Sun Aug 9 16:08:07 2009 -0700 Handle partial ALSA PCM writes The ALSA spec says that snd_pcm_writei will not return a partial write, but at least on the OLPC, that's not true. Deal with this. Signed-off-by: Keith Packard commit 3056cb8eef5aee0dcd342488386355d8b8f574c8 Author: Keith Packard Date: Sun Aug 9 15:55:19 2009 -0700 Check more alsa return statuses commit 8ddf3345afd8cbf638e81993633f7861d8dbca63 Author: Keith Packard Date: Sat Jul 18 01:47:34 2009 -0700 Don't report distance to rocket without valid GPS When there's no valid GPS data, don't try to report the distance and bearing to the rocket after landing. Signed-off-by: Keith Packard commit fbcb7b20fa701a6e534d38e307839466545668e3 Author: Keith Packard Date: Sat Jul 18 01:05:33 2009 -0700 Add B command to set serial baud rate Signed-off-by: Keith Packard commit 91b023e7e4eeed838e0320d2ddac0f6aac39e565 Author: Keith Packard Date: Sat Jul 18 01:05:13 2009 -0700 Get rid of spaces after minus sign in climb value commit 28be20cf914fb34dc3c776519708d0f02091764e Author: Keith Packard Date: Sat Jul 18 01:04:39 2009 -0700 Switch to 57600 baud for GPS data commit d3f76ce58b9c0ed2e5a9fe3bbc7fb9cb38247714 Author: Keith Packard Date: Sat Jul 18 01:04:17 2009 -0700 Drain serial port before changing speed Signed-off-by: Keith Packard commit d7c2d358ed8a1afc9f0ba2bd830b10f6b56dc7b1 Author: Keith Packard Date: Sat Jul 18 00:44:42 2009 -0700 Display last known GPS coord while unlocked Signed-off-by: Keith Packard commit 5195fcfe239e430e1f9f11774c9a245c7b29dae9 Author: Keith Packard Date: Sat Jul 18 00:44:01 2009 -0700 use g_source_destroy instead of free on serial object commit 1e5e98bd8f5ea0bc15592de454e3629383462371 Author: Keith Packard Date: Sat Jul 18 00:43:22 2009 -0700 Trim aoview_serial_set_callback args down to just port and callback commit 08f37056deec25d77062bc411a04033401b033a5 Author: Keith Packard Date: Fri Jul 17 22:11:03 2009 -0700 Reset GPS at boot time commit 1150aa850f5a025b849556e32c4dddb27937d9af Author: Keith Packard Date: Fri Jul 17 22:10:43 2009 -0700 Fix up serial debug output commit 2a7956a64935246475f92d44c08369e0230b676a Author: Keith Packard Date: Fri Jul 17 21:34:13 2009 -0700 Allow the GPS port to run at 4800 baud if desired commit 8d650769c319261c97f5e68eff9138207b95c0f8 Author: Keith Packard Date: Fri Jul 17 21:33:53 2009 -0700 Initialize the GPS serial protocol state Signed-off-by: Keith Packard commit ab40d224b39ba6d29c4056e2d2c365e1eb3d3793 Author: Keith Packard Date: Fri Jul 17 21:33:18 2009 -0700 Use uint8_t for comparisons to avoid int conversions Signed-off-by: Keith Packard commit d6749bf24792bb41ca700cf4b8e5e1ac1a63cbf0 Author: Keith Packard Date: Fri Jul 17 21:30:53 2009 -0700 Add AO_GPS_RUNNING state. This tracks whether the GPS receiver has ever sent a valid report to the flight computer, allowing the user to tell whether the GPS receiver is working at all. Signed-off-by: Keith Packard commit a1da7e871aee75308bc05ce1b7a0dc402e4c9509 Author: Keith Packard Date: Fri Jul 17 21:25:35 2009 -0700 Add M command to monitor serial bytes commit ddfa2308c0be4c002f982ae9da6032ee7854117d Author: Keith Packard Date: Fri Jul 17 21:24:45 2009 -0700 Support the not-connected GPS state commit 34f148500df427c148188c0ada20bf914a7c74ba Author: Keith Packard Date: Fri Jul 17 19:23:10 2009 -0700 Use 57600 baud for GPS. Clean up gps init. Assume GPS is either in 4800 NMEA or 57600 SiRF mode, send just the sequence to get from 4800 NMEA to 5760 SiRF. Also, eliminate threads from the gps test program. Signed-off-by: Keith Packard commit 2deca0c52cd6cfb4baceb59c8a5458344bada338 Author: Keith Packard Date: Fri Jul 17 17:09:20 2009 -0700 Try harder to get the GPS receiver serial link sync'd up. We cannot assume that the GPS receiver is in any particular state when it boots, so we try to send the serial configuration at several rates and hope that it eventually sees something that it likes. Signed-off-by: Keith Packard commit 31d5670a9144b943ce9c8cb00deb5fb659af0b1c Author: Keith Packard Date: Fri Jul 17 17:06:18 2009 -0700 Rolling average for pad location. Say 'GPS ready'. Use a rolling average for the pad location, instead of just averaging all positions. This filters out old (presumably less accurate) values eventually. When enough GPS samples have been acquired, say 'GPS ready'. Signed-off-by: Keith Packard commit bfe1e76c82738baaf65abbc58c3244a07ea8fefe Author: Keith Packard Date: Fri Jul 17 16:22:51 2009 -0700 Split GPS data into a separate column Signed-off-by: Keith Packard commit 5f0179652e8bb85add9067e5253e981c60f2c51e Author: Keith Packard Date: Fri Jul 17 16:03:35 2009 -0700 Fix up SiRF parsing and test code so that it actually works Signed-off-by: Keith Packard commit 0b35447d05a0c7eaf4fefcbcf0065fe3320bba82 Author: Keith Packard Date: Fri Jul 17 13:58:14 2009 -0700 Add host-side gps protocol testing program commit fef7334bddb9fccfbd6deab7d5d466ab3e76323a Author: Keith Packard Date: Sat Jul 11 00:56:13 2009 -0700 Hook aoview directly to alsa This skips the flite internal audio stuff which opened and closed the audio device for each phrase. This caused the first part of some phrases to be missed when using an external audio device. Signed-off-by: Keith Packard commit 80cadf44f5f1accd6ddfca25c2af8d4d424f26d9 Author: Keith Packard Date: Thu Jul 9 20:55:10 2009 -0700 Show speed. Format numbers. Timeout and report final status. The speed value is now shown in the top label bar. Ascent shows accelerometer-derived data, otherwise it's baro derived. All of the numbers displayed are now given sensible printf formats so they don't contain way too many digits. Instead of doing periodic reporting based on flight tick count, data is reported every 10 seconds based on wall time. After landing, or when no data have been received for a while, final flight information is spoken. Signed-off-by: Keith Packard commit 19630ef084866f4230e68ccf11284b30c68128b1 Author: Keith Packard Date: Sun Jul 5 08:35:28 2009 -0700 Dont smash aoview_monitor_parse input buffer commit e506ed4b6efb86eab50204658fcd433b987e3831 Author: Keith Packard Date: Tue Jun 30 15:25:52 2009 -0700 Integrate flite into aoview directly. Fix great circle computation. Use a separate thread for flite rather than a separate program. Save voice state to gconf. Add filters for replay file selection Signed-off-by: Keith Packard commit 5b988e0146075d57434f8484e1ec9fcf3e183df2 Author: Keith Packard Date: Tue Jun 30 15:24:53 2009 -0700 Make window taller commit 696233b088645bba1aaa6aa6c5358c3ecfa5cd3f Author: Keith Packard Date: Tue Jun 30 15:24:31 2009 -0700 Use 16kHz voice commit 2e06772c8b6fd74f86e640ed97f0d5bc8c095c2f Author: Keith Packard Date: Tue Jun 30 11:58:30 2009 -0700 Add telem replay and larger labels Replays telemetry files in real time Shows height/state/rssi in big values at the top. Signed-off-by: Keith Packard commit 566dde161385263700eaae51095eecfa9b5972ee Author: Keith Packard Date: Mon Jun 29 23:06:47 2009 -0700 Update aoview/.gitignore Signed-off-by: Keith Packard commit 4ca2d910f3be689fd3c78a4f1be0555d6b1a30c1 Author: Keith Packard Date: Mon Jun 29 23:05:27 2009 -0700 Use flite to announce flight state This uses the flite voice synthesis library from festival to announce altitude and speed information during the rocket flight. Signed-off-by: Keith Packard commit 527d7c803ed9597b210634018cb2eb9d048d9846 Author: Keith Packard Date: Mon Jun 29 23:03:58 2009 -0700 Add GPS speed and error data to telemetry and aoview Having switched to the SiRF binary GPS format, the velocity and error data can now be displayed. Signed-off-by: Keith Packard commit ee4919dd771b00e2a2dd1083c9528efa7baab50f Author: Keith Packard Date: Mon Jun 29 13:54:00 2009 -0700 Convert GPS to SiRF binary protocol. This switches the GPS unit from NMEA to SiRF protocol at startup and then parses the binary data. The binary data uses a different encoding of lat/lon than the NMEA strings, and so the telemetry and eeprom data formats change with this switch. Signed-off-by: Keith Packard commit 49bf37767d2453869f2ca2c0832d1124322c66e0 Author: Keith Packard Date: Wed Jun 17 23:22:25 2009 -0700 Add ejection computation utility Signed-off-by: Keith Packard commit e59520e343c2573b1b92c0b3c4aaa93e51bc55d3 Author: Keith Packard Date: Wed Jun 17 13:55:23 2009 -0700 Fix clock initialization to not try to use 32kHz xtal on P2_3/P2_4 None of our boards have a 32kHz xtal oscillator, instead we use those pins (on Telemetrum) for the deployment firing circuits. The old clock initialization code was switching from the 32kHz RC oscillator to the 32kHz crystal and overriding our use of those pins. Signed-off-by: Keith Packard commit 1c3cc12c08ddefbd6456a55c54ef87dd94d4ae9a Author: Keith Packard Date: Sun Jun 14 17:25:34 2009 -0700 Some kernels reference USB ttys as tty/tty* instead of tty:tty* Signed-off-by: Keith Packard commit 0f2cbd41332b1b63865c5f1a4e749419b469853a Author: Keith Packard Date: Sun Jun 14 16:45:19 2009 -0700 Rename state apogee -> coast commit 5834a12c1d3d71105c9e3d1ceaf9f3ffac9ff1eb Author: Keith Packard Date: Sun Jun 14 16:39:28 2009 -0700 rename states. launchpad -> pad, coast -> fast commit 8c40f19acd09fe93d492c9355da8a1198c34b1c3 Author: Keith Packard Date: Sun Jun 14 16:36:29 2009 -0700 Disable monitor mode when communicating via usb commit 7adea9c59c73acd52743446c74fb675e0a1d6d05 Author: Keith Packard Date: Thu Jun 4 14:38:45 2009 -0700 Format GPS seconds as %02d.%04d to avoid spaces in the value The aoview GPS parsing code doesn't deal well with spaces in the middle of the value, so pad the seconds field with a zero as needed. Signed-off-by: Keith Packard commit a0e6bfee635b64092262936c858542318f6fc6dc Author: Bdale Garbee Date: Thu Jun 4 13:11:48 2009 -0600 newer INSTALL file pulled in by autogen.sh commit cf1e258d52b878df10b51a047709b10ecd51a68e Author: Bdale Garbee Date: Thu Jun 4 13:09:29 2009 -0600 add a distclean target to src/Makefile commit 176052b7c14fcad067835ecb550778faf67cf4da Author: Bdale Garbee Date: Thu Jun 4 13:07:10 2009 -0600 add lib to the front of the subdir list commit 208bc15714c7b4020c017eef19011c4eb9ab51e2 Author: Keith Packard Date: Thu Jun 4 11:20:10 2009 -0700 Move build and debug tools to 'cctools' directory. These tools were merged in from the ccdbg package. Signed-off-by: Keith Packard commit 17d2432a8b9c15963cd3b821f025ad33972ef477 Merge: 210dbaa 8a9a3f0 Author: Keith Packard Date: Thu Jun 4 11:13:15 2009 -0700 Merge ccdbg and altos sources into one giant repository Keeping these separate isn't making things any easier. Signed-off-by: Keith Packard commit 210dbaa23cdacf3a6f2d6e23493e96ee2ac9bca7 Author: Keith Packard Date: Thu Jun 4 10:41:34 2009 -0700 Use autotools, move altos to src subdir Signed-off-by: Keith Packard commit 8cce307bb3156584ba17ae5a787f645dfee5fb94 Author: Keith Packard Date: Thu Jun 4 10:25:30 2009 -0700 Make menu seperator insensitive commit 778cae8fc5a4b30e5045e4703316fc61ae18562a Author: Keith Packard Date: Wed Jun 3 17:07:34 2009 -0700 aoview: Add eeprom data fetching Fetches the last flight data from a TM device connected via USB and writes it to the flight log directory. Signed-off-by: Keith Packard commit bf140966e9649e75b884c8aa5f25ffbf9eed10ea Author: Keith Packard Date: Wed Jun 3 10:57:46 2009 -0700 Stop log dumping at flight end. Print 'end' at end of log. No reason to continue dumping data past the end of the flight now that the logging stuff has been demonstrated to work reliably. Also, to make automated log dumping easier, this prints out 'end' after the log data so that aoview knows when to stop reading. Signed-off-by: Keith Packard commit 35ac66969abe24ca23776618306a59fc17770e06 Author: Keith Packard Date: Sun May 31 09:22:01 2009 -0700 Start adding bi-directional packet link commit 3a3bfd471a868d546d83cdc431b53c8f5208edb9 Author: Keith Packard Date: Thu May 28 23:17:33 2009 -0700 Eliminate RDF tone generation. Now that we have a viable telemetry-signal based RDF device via TeleDongle, there's no reason to continue to waste power and bandwidth with a NFM tone. Signed-off-by: Keith Packard commit 4d83eef0fe1d24a845ab29a535dfc56e13e7ee20 Author: Keith Packard Date: Thu May 28 23:17:25 2009 -0700 Change .gitignore to match new aoload procedure commit dcfcf3bec6788460b6fe8c239c80bad4526bd15b Author: Keith Packard Date: Wed May 27 22:01:37 2009 -0700 Leave serial number writing to aoload Instead of building per-serial hex files, leave that process to the new aoload program Signed-off-by: Keith Packard commit 8a9a3f02b951382573ff74dd6ce5a1c0f335fa86 Author: Keith Packard Date: Wed May 27 21:53:15 2009 -0700 Add aoload to load serial-numbered altos binaries. aoload is a custom version of ccload which edits the data before sending it to the target machine, writing the target serial number into the data. Signed-off-by: Keith Packard commit 5a7a63c34b778e40a61ddabd16ec1af9a2be50c3 Author: Keith Packard Date: Sat May 23 21:20:12 2009 -0700 Fix aoview telemetry GPS parsing code to use correct columns This code was trying to pull the GPS data from the wrong columns, causing aoview to fail to display GPS information. Signed-off-by: Keith Packard commit 26988c3e7acb2fa832810475e43e08fd2867459c Author: Keith Packard Date: Sat May 23 21:18:57 2009 -0700 Parse both telemetry or log data ao_flight_test Change the way data is fed from files to the flight test rig to handle either kind of input file. Signed-off-by: Keith Packard commit d6f5a0689023546464a71561f53fa2c943077c88 Author: Keith Packard Date: Sat May 23 21:16:22 2009 -0700 Avoid 16-bit overflow in velocity computation. Adding two 16 bit integers together can wrap around to negative numbers, this resulted in velocity values which never decreased, making the switch from coast to apogee state not occur. Signed-off-by: Keith Packard commit aa6d87aeb616dd62f0debaded297232022b4f8bd Author: Keith Packard Date: Wed May 20 09:44:55 2009 -0700 Make file handling more general so it can be reused. The log file handling stuff will be useful for saving eeprom data, so pull it out of the real-time log handling code and make a general interface. Signed-off-by: Keith Packard commit b730c8bcbce649cdddba935e1112aaae538bc526 Author: Keith Packard Date: Sun May 17 23:54:44 2009 -0700 Ignore aoview_glade.h commit 91b07410122d0eaaf292cdb31c200925d45eaf2c Author: Keith Packard Date: Sun May 17 23:36:21 2009 -0700 Transmit computed ground pressure and acceleration values These are the last two values relevant to figuring out the state of the flight computer, and as they are computed by averaging 10 seconds of 100Hz sample data, they're a lot more accurate than anything the receiver could do on its own. Signed-off-by: Keith Packard commit 71d1689759829f1bc8550f1a4d8c9f2dc90b2ab4 Author: Keith Packard Date: Sun May 17 23:18:09 2009 -0700 Provide install target commit f301b95e87c8ec1e3b58d595a05d486bede5e0c2 Author: Keith Packard Date: Sun May 17 23:13:20 2009 -0700 Embed glade file in executable This eliminates install issues nicely. Signed-off-by: Keith Packard commit 26361686d6fc63dc22d22285f0543c5c2c756fb4 Author: Keith Packard Date: Sun May 17 23:05:23 2009 -0700 Add About dialog to aoview. Signed-off-by: Keith Packard commit 0f3233c49f43cd4e372e613303919ce4d50255b2 Author: Keith Packard Date: Sun May 17 22:44:19 2009 -0700 USB device names can contain '.' too Depending on the hierarchy of devices, names can contain '.', so allow those too. Signed-off-by: Keith Packard commit 33221277690e6ee30387c506c3f2b8237ed48efd Author: Keith Packard Date: Sun May 17 22:43:34 2009 -0700 scandir returns -1 on error In which case, the namelist is invalid, so don't look at it, and don't free it. Signed-off-by: Keith Packard commit 7cb9fb675f56bf30ab6bf0bcdc5cb679709ffe3e Author: Keith Packard Date: Sun May 17 22:29:54 2009 -0700 Send computed accel/vel/pres values over the radio These computed values reflect what the flight computer is actually refering to for state changes, and will be useful in debugging the flight software as well as provide a filtered view of the data. Signed-off-by: Keith Packard commit 2c780d67b8a22d75a2da4b2af21fd35f0c6f5236 Author: Keith Packard Date: Sun May 17 22:29:06 2009 -0700 Handle disappearing serial devices Put up a dialog when the serial open fails, and shut down monitoring when the serial device disappears while running. Signed-off-by: Keith Packard commit 69616104813fc5ba89fb3128d04fb9328961c59c Author: Keith Packard Date: Sun May 17 22:24:53 2009 -0700 While on the pad, zero out velocity every second We integrate acceleration to get velocity, but that means sitting on the pad for a long time can add substantial error to the velocity value. Each second, take the velocity value from a full second ago and subtract that out of the current velocity. Once we detect boost, this will stop, which means that as long as we detect boost within a second, we won't have subtracted out any "real" velocity. This keeps the pad velocity hovering around zero, which is pretty useful. Signed-off-by: Keith Packard commit 1234694eb903b204488ddc7cb30bcfe34bf1e677 Author: Keith Packard Date: Sun May 17 01:29:06 2009 -0700 Clear table, reset log on disconnect commit 4316b6af86b37522038e642235c163fcaad52e96 Author: Keith Packard Date: Sun May 17 01:28:16 2009 -0700 Add pad lat/lon, max accel, max height Signed-off-by: Keith Packard commit 4348281bd788a13ea700413537f12da3c00356e4 Author: Keith Packard Date: Sun May 17 00:46:09 2009 -0700 Clean up GPS display Signed-off-by: Keith Packard commit ff68e38770351ddac3285ce275cd85adab01fd3d Author: Keith Packard Date: Sun May 17 00:45:38 2009 -0700 Make aoview window taller Signed-off-by: Keith Packard commit be3f4fed7b863c8cdaabe32b61b65a8b3cd11355 Author: Keith Packard Date: Sun May 17 00:13:45 2009 -0700 Add lots more aoview UI bits Logs data to files, displays current state in window. Signed-off-by: Keith Packard commit 93d7ce8e054515ed7b166eb042ae7f47e564d21d Author: Keith Packard Date: Sat May 16 20:45:26 2009 -0700 When logging starts up, right the whole ring to the log. This preserves the data pre boost-detect for later analysis. Signed-off-by: Keith Packard commit fec4212a59a7b3321536b25707dcabc43c797c33 Author: Keith Packard Date: Sat May 16 20:04:31 2009 -0700 Abandon use of accelerometer for apogee detect. Integrating the accelerometer data to compute velocity worked for one rocket flight, but additional testing shows that it doesn't work in other airframes. Until we figure out how this should work, we'll rely on the altimeter to detect apogee. Signed-off-by: Keith Packard commit 09771c644de54ae354e8f98af7ba74289b3c0fcc Author: Keith Packard Date: Sat May 16 02:25:04 2009 -0700 Add preliminary aoview code AoView connects with TeleDongle to present telemetry information in a reasonable form. Right now, it just displays information to stdout, but it does have fancy dialogs for finding the USB devices. Signed-off-by: Keith Packard commit 37250b00f6286aee4b3b28604f5d463db3079a89 Author: Keith Packard Date: Wed May 13 20:41:54 2009 -0700 Discard usb output before connection. Handle USB reset. Discarding output before USB is plugged in allows threads that send output and do other things to work without a USB connection. Unfortuantely, there doesn't appear to be any way to detect when the USB link is disconnected, which means that once USB is enabled, future writes will continue to block. USB reset causes the USB interrupts to all be reconfigured back to power-on state. Signed-off-by: Keith Packard commit 9b974217958b1017e62d6c4f4568f547ccc30c58 Author: Keith Packard Date: Wed May 13 20:40:42 2009 -0700 Enable radio monitor by default in teleterra, teledongle and tidongle These ground loads want to monitor the radio constantly, and not require use of the 'm' command before listening. Signed-off-by: Keith Packard commit 25fc03a333b2cfad0a93ebc385fbcf74b63c229e Author: Keith Packard Date: Wed May 13 20:39:28 2009 -0700 Remove monitor/rssi functions from telemetrum load Telemetrum is now a flight-only load, use teleterra or teledongle for ground boards. Signed-off-by: Keith Packard commit 05493b98eb1ae4d30cb0b600849d70b03fa33594 Author: Keith Packard Date: Wed May 13 20:38:11 2009 -0700 Split out ao_state_names to separate file Allows state names to be used in programs without monitoring enabled. Signed-off-by: Keith Packard commit d085d43701e3cdd2119e947a9ae45baa78c80318 Author: Keith Packard Date: Wed May 13 14:29:30 2009 -0700 Indicate RSSI with a blinking LED Blink the red LED at a rate proportional to the RSSI value. Signed-off-by: Keith Packard commit 055331d5f7d5adc40c348c3efd331a562dcda82a Author: Keith Packard Date: Wed May 13 11:19:13 2009 -0700 Make ao_flight_test show AGL altitude and positive acceleration under boost This makes the output more readable Signed-off-by: Keith Packard commit d91208fbf5fc7797b93087ef8619454c4bed0130 Author: Keith Packard Date: Wed May 13 11:18:24 2009 -0700 Make ao_flight_test able to read raw logging data Protect ao_flight_test reading functions so that a simple 'script' output can be fed to the program and have it work correctly. Signed-off-by: Keith Packard commit d3dbd8949e1102220ad5fd0863f493c819b96e46 Author: Keith Packard Date: Wed May 13 11:16:53 2009 -0700 Print only RSSI when packet CRC is invalid Packets with invalid CRC usually contain bogus data, so don't print that, just print out the RSSI which may contain useful data. Signed-off-by: Keith Packard commit 8168820b667cc1deffab64dd81cb4e6e2e6eabe4 Author: Keith Packard Date: Wed May 13 11:00:43 2009 -0700 Accelerometer-based velocity values are invalid after apogee Because the orientation of the flight computer relative to the ground is unknown after apogee, the accelerometer data cannot be integrated to compute velocity. Main deploy is now based purely on barometric altitude and landing detection no longer checks for a low velocity value. Signed-off-by: Keith Packard commit 24fdda44ff8604e40510b196ead17564d8f8cd3d Author: Keith Packard Date: Wed May 13 10:59:04 2009 -0700 Add velocity check for boost detect via accelerometer Bumping the rocket can cause a brief period of high acceleration, which may cause a mistaken boost detection. Require both a high acceleration and reasonable velocity to trigger boost phase. Signed-off-by: Keith Packard commit 7a1aa3fdbc0d1fae5e7ee027bf8904598c6ebe41 Author: Keith Packard Date: Wed May 13 10:58:30 2009 -0700 Typo in callsign commit 497c89a7d08920630894b2605c3b6a0bdc4c229b Author: Keith Packard Date: Sun May 10 23:11:06 2009 -0700 Use recorded accelerometer baseline data in ao_flight_test With the flight computer recording a long-term average value for the accelerometer in the flight record, use that to prime the flight test code when running a log file through the simulator. Signed-off-by: Keith Packard commit ba3c53636e485450f48093d0a88a6629775f7c3a Author: Keith Packard Date: Sun May 10 23:01:16 2009 -0700 Don't re-initialize the landing range data at each apogee detect sample The landing range values are used only after apogee detect, so we need only initialize them on the transition from apogee to drogue. Signed-off-by: Keith Packard commit b623b1098bc7a10d471730259438fb82804221d0 Author: Keith Packard Date: Sun May 10 23:00:06 2009 -0700 Initialize ao_min_vel with |ao_flight_vel| As ao_min_vel is stored as an absolute value, it's important to preserve that invariant, even though we don't expect ao_flight_vel to be negative at coast. Signed-off-by: Keith Packard commit e9584e846b9bd7926d61451d32ba5d7a30416f7b Author: Keith Packard Date: Sun May 10 22:58:31 2009 -0700 Decrease telemetry rate on the pad to 1/sec instead of 20/sec Transmitting telemetry through the radio consumes a significant amount of battery; reducing the rate to 1/sec will reduce power usage while waiting for launch. Signed-off-by: Keith Packard commit 97cecb517cd7bf75e1219c76a93bfe6964c07052 Author: Keith Packard Date: Sun May 10 22:57:19 2009 -0700 Increase the initial accel/baro average to 1000 samples To get an accurate baseline of the launchpad state, take a longer average of the two sensors as the unit boots up. Signed-off-by: Keith Packard commit 98806b1ff3f41484663d61ff430e9e2764c7b5e6 Author: Keith Packard Date: Sun May 10 22:54:14 2009 -0700 Record average accelerometer value in flight start log record The average accelerometer value cannot be extracted from the log as the record starts after that is computed. As that drives much of the accelerometer-based state transition logic, it is an important value to have, so we log it as part of the flight start record now. Signed-off-by: Keith Packard commit a12edbfe21fe27a9efbf87bacda9ab4806256e2b Author: Keith Packard Date: Sat May 9 10:24:10 2009 -0700 Add version command to show product information commit e80b87f5e3ccf152d67a2e87bdefda161c455599 Author: Keith Packard Date: Sat May 9 10:23:49 2009 -0700 Pad callsign with nuls commit beae3360828da21eb1a3c4f88e930f242d4e36b7 Author: Keith Packard Date: Fri May 1 08:14:57 2009 -0700 USB spec limits bulk endpoints to 64 byte payload max. For full-speed devices, bulk endpoints may use 8, 16, 32 or 64 bytes, but no more. commit de7814c738488c2c16c6216c93fa78128895e5d5 Author: Keith Packard Date: Wed Apr 29 17:46:56 2009 -0700 Use 'char' instead of 'uint8_t' for character data String and character constants are of char type, so using uint8_t causes promotion to 16-bit types when comparing the two. commit 4ae74fffb939d67424efa3e7f433637f1f920ebc Author: Keith Packard Date: Wed Apr 29 17:46:36 2009 -0700 Eliminate incorrect cast in printf string argument char * is a pointer to a string in the default address space, not a generic pointer to a string. As such, the compiler (at least 2.9.0) mis-compiles this if the cast is included. commit 39f2a3c6bd501d12a92bfd38434ce67bb5beb70d Author: Keith Packard Date: Wed Apr 29 17:44:41 2009 -0700 Correct radio frequency shown in config display. Radio frequency base is 434.550, not 435.550 commit 75ca1751b7cac2f8074d0713ee96d6ab45b54f19 Author: Keith Packard Date: Wed Apr 29 17:42:26 2009 -0700 Reset landing interval tests at apogee This moves all of the interval management into the landing test code and out of the main loop. The interval is reset at apogee to make sure the sensors produce a stable reading for at least 20 seconds commit 7a1b77c2d7253a681389f32b70e2460aac188807 Author: Bdale Garbee Date: Sun Apr 26 17:53:13 2009 -0600 clean up host programs, too commit 5df80c346d65a9d56a8699b056dc44924acb31fe Author: Keith Packard Date: Sun Apr 26 16:04:07 2009 -0700 Was missing v_batt in adc dump command commit c3fec2c4c65db71e88ef0c05c69463438a7cfc6c Author: Keith Packard Date: Sun Apr 26 15:38:28 2009 -0700 Add manual ignition and igniter test commands commit 819f1de8dd6010fae050bcef930943c7923929f9 Author: Keith Packard Date: Sun Apr 26 15:38:03 2009 -0700 Clean up commands a bit commit 178abb5c8439509926a5507911d7148b84f051b8 Author: Keith Packard Date: Sun Apr 26 15:08:58 2009 -0700 Clear more files on make clean commit 70a69f3acdca27b80cdb2069de59bbc6dba83dbd Author: Keith Packard Date: Sun Apr 26 15:05:29 2009 -0700 Label binaries with product and serial info commit 5ed3b1cb52b573db1fee9655a29a0e6dd72f53fe Author: Keith Packard Date: Sun Apr 26 01:37:02 2009 -0700 Make sure full log is written and flushed on landing. The final state change to landing is recorded in the logging thread, so have that turn off logging once it has recorded that state. Then make it go to sleep. commit 2e737ad00cad5d893b252d8aa9dbff3d9b800731 Author: Keith Packard Date: Sun Apr 26 01:36:53 2009 -0700 Clean up monitor output a bit commit 38a0b61b0a0b3c00f064c8d562950a17a6ddff4a Author: Keith Packard Date: Sun Apr 26 00:11:32 2009 -0700 Add configuration support Current config variables: Main deploy altitude above launch (in meters) Acceleration zero g calibration (manual or automatic) Radio channel (freq = 435.550MHz + channel * 100kHz) Callsign (max 8 characters) Supporting this involved shuffling code around so that the non-telemetrum builds could include only the stuff they needed. commit c65f1a1acd2ca00758833cec5d3f8056d303d3e2 Author: Keith Packard Date: Sat Apr 25 14:44:33 2009 -0700 Allow for slower ADC operation. Add power saving code. This tries to make the flight computer use less power by disabling USB in flight mode, lowering the telemetry rate after ascent. It also disables the RDF beacon during ascent and re-enables it once descent has started. commit 8e7b48b5f090be81980ab00fbce814ae1cc253e4 Author: Keith Packard Date: Sat Apr 25 14:44:04 2009 -0700 Allow ADC to be disabled commit 7bc3d9962872850e7b420221cf689db16b4305cc Author: Keith Packard Date: Sat Apr 25 14:43:23 2009 -0700 Place CPU in P0 state while idle commit e45fce7f82d704d677f84c69b0e07588d109d780 Author: Keith Packard Date: Sat Apr 25 14:42:20 2009 -0700 Add RDF beacon and callsign to telemetry commit 61510f98404bca6861b2da98f6cd9ba9deb76968 Author: Keith Packard Date: Sat Apr 25 14:40:51 2009 -0700 Add radio code to emit a 1kHz tone commit 0f07803d84b5ac89500ee33a6818c50583e3ff7f Author: Keith Packard Date: Sat Apr 25 13:18:37 2009 -0700 Allow the USB system to be disabled/enabled at run-time commit 45976af820fc41099928df71ea8304c56eb9fc7c Author: Keith Packard Date: Sat Apr 25 13:16:27 2009 -0700 Make LED usage depend on target device commit 4a050704ad2c497e9f1b0988334228b0bbc4c170 Author: Keith Packard Date: Sat Apr 25 13:13:24 2009 -0700 Make some functions reentrant to save DSEG space commit 6b3d25a6d6d7847765eb03b836913dd5ecef2993 Author: Keith Packard Date: Fri Apr 24 19:17:37 2009 -0700 Add monitor task to flight software Allows the use of telemetrum in teledongle mode. commit ad0d2d88a91cbd02c56ea5ff6dab23e16aec6510 Author: Keith Packard Date: Fri Apr 24 19:17:19 2009 -0700 Report difference from ground to max altitude at landing commit f94ab879ff6f97708827c74facd11003a2d8b590 Author: Keith Packard Date: Fri Apr 24 19:16:29 2009 -0700 Display data with units while running simulation commit 6fb26340b150e831a8a9e25e3b68074c29e48dbe Author: Keith Packard Date: Fri Apr 24 19:13:31 2009 -0700 Enabling apogee detect via speed: < 200m/s && < max_speed - 50m/s This change ensures that we actually got going fairly fast, and then slowed down a bunch before enabling apogee detect. Otherwise, we'll detect apogee right off the pad as we're not going very fast at that point... This also adds the 'f' command to show the current flight status on the USB port. commit 20b9f304ecbddd73a0ee2461b4c5e80f08157f98 Author: Keith Packard Date: Fri Apr 24 19:12:28 2009 -0700 configure igniter ports, set values to measured ones commit 6bf1d91ce0b723abe2bcec89668c13135ec044cf Author: Keith Packard Date: Fri Apr 24 19:11:40 2009 -0700 Move ao_led_init to end of file to be consistent with other files commit b4de7d550ec9a09ccf5f6a72debc6646706e3516 Author: Keith Packard Date: Fri Apr 24 19:10:20 2009 -0700 Define ao_state_names in ao.h so other people can share commit 8e62747b3692d0ac75b08eaf5c3e4b5d766be6ad Author: Keith Packard Date: Fri Apr 24 19:09:31 2009 -0700 Bump NUM_CMDS to 10 commit 2f781beb73ef24ab5fbe2688a83d07ad26c15972 Author: Keith Packard Date: Fri Apr 24 19:09:09 2009 -0700 Move beep_init to end of file to be consistent with other files commit b99315cee4ab796376458a2442cf36806fa4aed3 Author: Keith Packard Date: Fri Apr 24 10:19:31 2009 -0700 Update flight algorithm based on data collected from SN-1 Flight 1 This now correctly sequences through the flight data collected from the first TeleMetrum test flight. This also completes up the flight algorithm test harness (ao_flight_test), which runs the flight algorithm on the Linux host from a captured data log. commit b32f2f0090ff967edac07ae4d7a9895ed0b96d31 Author: Keith Packard Date: Thu Apr 23 22:17:44 2009 -0700 Add igniters and update flight control algorithm commit f155333ae18a25068644792e8940269d9fb28033 Author: Keith Packard Date: Fri Apr 24 00:15:09 2009 -0700 Avoid ram from 0xfda2 through feff, its funky commit f9c1c545c9dc11c3190a6cf7504883131fffce2f Author: Keith Packard Date: Thu Apr 23 22:18:33 2009 -0700 remove ao_flight_test until its ready commit 86e73c009f78dc4664883353124fc891fbb01dce Author: Keith Packard Date: Thu Apr 23 20:50:07 2009 -0700 Add teledongle module commit 204daac71ad56926730f5d6860bd70c645302e19 Author: Keith Packard Date: Thu Apr 23 14:26:01 2009 -0700 Set telemetry rate to 100ms commit 306b28f632e21b42ab165e7944283cf9764b590e Author: Keith Packard Date: Thu Apr 23 14:23:26 2009 -0700 Wrong license on ao_monitor.c commit dca3a6de26d26c0020f3fb2cf5d8ac1552c195b1 Author: Keith Packard Date: Thu Apr 23 14:23:00 2009 -0700 Crank up radio to 10dBm commit fbe3096f7e9a8112dbc79f376eccdaa6872ae520 Author: Keith Packard Date: Wed Apr 22 16:03:28 2009 -0700 Add COPYING file commit 9b7788f18bbaf3c4e5ebbf6c5ebd926468b0e045 Author: Keith Packard Date: Wed Apr 22 15:55:01 2009 -0700 Clean up TeleTerra files commit 61cee50c86e275f9fde875bd317c3e74255394ec Author: Keith Packard Date: Wed Apr 22 15:53:55 2009 -0700 simplify ao_time function commit 3703ecdc9e190f2e0b7ead0e71b78be881c1f3b7 Author: Keith Packard Date: Wed Apr 22 15:53:46 2009 -0700 One line radio status commit 1fbb3c17672a03ea6318fee07f9c2dcd7a8d0b16 Author: Keith Packard Date: Wed Apr 22 15:49:16 2009 -0700 Add new binaries to .gitignore commit 00d5610caff61559eb24c24beaa56629d6bb03be Author: Keith Packard Date: Wed Apr 22 15:49:00 2009 -0700 Speed up dbg port bit frobbing commit c7555eb16876aa8ff9fe7f648d325a1b8fb54d23 Author: Keith Packard Date: Wed Apr 22 15:48:28 2009 -0700 Use sdcc from path commit ada6dea04b94be016598566c4c13e6105aaec353 Author: Keith Packard Date: Wed Apr 22 15:48:14 2009 -0700 Clean up task list formatting commit 0a1b2297ee9f5bbb918bd72f26088a3e0b84839a Author: Keith Packard Date: Wed Apr 22 15:47:57 2009 -0700 Control radio monitoring with the M command commit 837c620f07b63efc171be3ac14c78bc99adf7592 Author: Keith Packard Date: Wed Apr 22 14:25:43 2009 -0700 Shrink USB output buffers, work around USB packet errors commit d87e9c25947d7cc2eba8894a524977f2c55a089a Author: Keith Packard Date: Tue Apr 21 02:07:24 2009 -0700 Clean up telemetry now that all packets are the same commit 1b333def5052d2ed47fdeaef23a897fe326f6340 Author: Keith Packard Date: Tue Apr 21 02:07:08 2009 -0700 Add longer debug delays to reset/debug_mode entry commit d1887ded41a5bfec8e10e9fd736fa9444b9b6222 Author: Keith Packard Date: Tue Apr 21 01:17:03 2009 -0700 Fix up fancy dbg stuff. Add teleterra initial bits. The dbg stuff needed a bit of help to actually walk the tables; it appears that complex expressions confuse sdcc. This also adds primitive teleterra bits, but no UI, etc. Signed-off-by: Keith Packard commit 43c8f7012102cdb591ace899420c10e4a78385ad Author: Keith Packard Date: Mon Apr 20 23:33:41 2009 -0700 Add radio support. Build separate executables for TeleMetrum and the TI dongle Ok, way too big a patch, but things were in rough shape. This patch adds support for the radio, both transmit and receive. Then, because I could no longer run the TeleMetrum code on the TI dongle, I ended up building a separate image for the TI board, which involved creating a mechanism for having multiple command sets and splitting code for different functions into different files. commit 5be13b76a2e29b84cd6d1eec065e3354b0dafce5 Author: Keith Packard Date: Sat Apr 18 23:19:24 2009 -0700 Start using pdata area for less-frequently used data commit 3e18b5a0d4c7d84df98b6ed0b7783de1d42d45bf Author: Keith Packard Date: Sat Apr 18 23:19:05 2009 -0700 Slow down panic presentation commit c4e983daa4579896b227fdcb2be43fad75e94307 Author: Keith Packard Date: Sat Apr 18 23:17:45 2009 -0700 Parse GPS data locally. Add 'g' command to display recent GPS results. This parses the GPS GGA message and stores it in a global variable, protected by a mutex. commit ed6f67dc47d750d5ff8bea63ae7cbb560689b9b6 Author: Keith Packard Date: Sat Apr 18 23:16:01 2009 -0700 Add task names and 'T' command to show task status. The T command shows the current wchan and PC for each task in the system. commit 3d5a5fc4db5f681e848202c4ee4099d2879677d6 Author: Keith Packard Date: Sat Apr 18 19:32:18 2009 -0700 Fix GPL version at 2 Signed-off-by: Keith Packard commit 022f83ca6fd589005d8eb3e25e633950fef69fa7 Author: Keith Packard Date: Fri Apr 17 23:38:14 2009 -0700 Add gps, debug dongle support and pressure alt tables GPS also pulled in serial support. The altitude tables take raw 11-bit pressure sample numbers and convert them to standard pressure altitude values. Signed-off-by: Keith Packard commit 31fce622b1bab7e3f421069d7f6d4d9bdcd825de Author: Keith Packard Date: Fri Apr 17 10:32:45 2009 -0700 Enable FEC in radio packets commit 293a357911090a2f37bdd6f7ea96942079ffdf2e Author: Keith Packard Date: Fri Apr 17 10:29:42 2009 -0700 Add CRC to radio packets commit 20834caf01ddf481e8362b0d2627ef383a82e09d Author: Keith Packard Date: Fri Apr 17 10:23:10 2009 -0700 Add data whitening commit 94e5343a72121a81ab19bf5025e6b6fc9847eb4f Author: Keith Packard Date: Fri Apr 17 10:19:25 2009 -0700 Add packet status byte defines commit 04bc51c170c6f22bb5cc16867ce9a307818a7a00 Author: Keith Packard Date: Fri Apr 17 10:11:31 2009 -0700 Add separate xmit/recv programs to radio demo commit fafe55c3405964e0defdf25b6c00236f9aaefbc5 Author: Keith Packard Date: Fri Apr 17 10:11:11 2009 -0700 Get env var for debug method selection commit 26095fc0511ee0d5213f038986032f7c59964cf0 Author: Keith Packard Date: Fri Apr 17 10:10:47 2009 -0700 Run-time selection between cp2103 and cc1111 commit 543bedde83cbce5145668e72965e02d892187b59 Author: Keith Packard Date: Thu Apr 16 20:38:14 2009 -0700 Send data commit 5e2393eb6b1a6d7b180bd63d5165ee7b7ff5f9e0 Author: Keith Packard Date: Wed Apr 15 14:25:26 2009 -0700 Move a bunch of variables from __data to __xdata commit 4d1091d9bd121f05f5fe0a9c9d2bc0da8c562b9a Author: Keith Packard Date: Tue Apr 14 21:25:15 2009 -0700 Slow down panic code, disable interrupts commit 545478dd02eaeff6a65d318e722b1e4fce5e01b4 Author: Keith Packard Date: Tue Apr 14 21:24:25 2009 -0700 Keep reporting flight state while it changes commit 9605045164882b4ca3d1317ac860b02513a51f30 Author: Keith Packard Date: Tue Apr 14 21:23:55 2009 -0700 use red LED to indicate system startup commit dc844ee7e49a3b6145b3165252a592ed070d600f Author: Keith Packard Date: Tue Apr 14 21:23:13 2009 -0700 Use ao_ee_flush_internal while holding mutex commit 5e45d1c89b00e74d5b2730345843f43aab516af2 Author: Keith Packard Date: Tue Apr 14 21:22:56 2009 -0700 Leave beeping and lights to the flight code commit 902c342289c1d13a4d55b9224acb6d67578b7a60 Author: Keith Packard Date: Tue Apr 14 21:22:31 2009 -0700 Make mutex functions reentrant commit acc4fc635edb70ec1ba2dff9f7ac0c8542c72c47 Author: Keith Packard Date: Tue Apr 14 19:08:01 2009 -0700 Add in existing flight pieces: flight/report/log These pieces come from the old telemetrum firmware. Signed-off-by: Keith Packard commit ac99982b10fd5772218660137ee21db9b90cd885 Author: Keith Packard Date: Tue Apr 14 14:21:56 2009 -0700 Add eeprom driver and command loop This involved adding dma control and a mutex implementation. Signed-off-by: Keith Packard commit fbd8f4aff5058f4d371596b04715b7cb6d38e729 Author: Keith Packard Date: Tue Apr 14 11:04:09 2009 -0700 Switch from --model-large to --model-small This shrinks the application quite a bit, and should make it faster as well. Signed-off-by: Keith Packard commit fb63262699d3a6fbf347d24efda8b01f75b7d0d3 Author: Keith Packard Date: Tue Apr 14 10:02:19 2009 -0700 Add comments, clean up white space, etc. Various clean ups now that the basic code appears to work. Signed-off-by: Keith Packard commit 7e4abf3a40c39d0ce4f466281bef9a464df85dd4 Author: Keith Packard Date: Mon Apr 13 21:58:07 2009 -0700 Switch USB to double-buffered commit b56a44e48552bc32dbba9ff21770c370219a684a Author: Keith Packard Date: Mon Apr 13 21:51:59 2009 -0700 Fix USB input/output by reloading packet limits. The USB controller is reset during the connection process, which clears the packet limits set in the controller at initialization time. Reload those values when the configuration is set. Signed-off-by: Keith Packard commit cdaf3fc5802acf2ddc7972a15649ab0e1b31b873 Author: Keith Packard Date: Mon Apr 13 20:39:46 2009 -0700 USB working up through reading strings commit c5c1e3fb1c253d387be02c127253ac2a55d577b4 Author: Keith Packard Date: Mon Apr 13 13:51:08 2009 -0700 Add USB support. This offers a single CDC ACM device over USB. Signed-off-by: Keith Packard commit f3f25a1cec7d2a034aa544569cfd23bea1a996c5 Author: Keith Packard Date: Sun Apr 12 23:53:55 2009 -0700 Add beep/led support. Support our P2_0 connected buzzer, and formalize LED output support. Signed-off-by: Keith Packard commit e14f07bfdb8824fc7ed6df1129c66ee39ffd6d54 Author: Keith Packard Date: Sun Apr 12 23:17:16 2009 -0700 Add A/D sampler Sample A/D at the timer tick, placing data in a ring of samples. Signed-off-by: Keith Packard commit 823f4f92de0c1f8dd7a644a8e56ffe9822bee6e2 Author: Keith Packard Date: Sun Apr 12 22:52:47 2009 -0700 Add 100Hz timer Use Timer 1 to generate a 100Hz timer interrupt commit 650a77e209dbb54c8d8fd9824cee430985564973 Author: Keith Packard Date: Sun Apr 12 21:58:49 2009 -0700 Update README commit 870e98334018a66de8a6e4a659d2dc5dee1cbecf Author: Keith Packard Date: Sun Apr 12 21:52:56 2009 -0700 GPL Version 2 only commit 11c526bdcbf4012e18fbfdc29ca8832870ca38f0 Author: Keith Packard Date: Sun Apr 12 21:47:32 2009 -0700 Add load command to s51 commit 55402ba3e87fd699c51079843309f1f0d1534724 Author: Keith Packard Date: Sun Apr 12 21:33:55 2009 -0700 Make test more complicated commit 3d3f849c9af9028f667cef4afedc0798d39a9efc Author: Keith Packard Date: Sun Apr 12 21:33:46 2009 -0700 SP points at last pushed byte commit f72c4cbc8fd9412dd1cce0fc446e7bbd2edc2d34 Author: Keith Packard Date: Sun Apr 12 20:27:03 2009 -0700 Add .gitignore commit 1903a86bf2cc6b685ccc475e62eabe49a4ec5b43 Author: Keith Packard Date: Sun Apr 12 20:25:39 2009 -0700 Initial AltOS import commit 5221dc63cf3a059a32aca2bfa7828c215be814a1 Author: Keith Packard Date: Sun Apr 12 12:38:58 2009 -0700 Add ccdump commit ee110425fb814780476d1d3d8a257af126f41763 Author: Keith Packard Date: Mon Apr 6 17:09:23 2009 -0700 Bump buffer pointer as data is written to cc-usb commit 2d9b8a83a2d9f495199033e43f519d26f27938fe Author: Keith Packard Date: Mon Apr 6 11:31:49 2009 -0700 Add support for a serial-connected custom debug dongle This uses the cc1111 board as a custom debug dongle with faster methods for communicating with the debug target. commit 24edd56155ed0fa02fdd8f66fdc7aa5a1021bf7d Author: Keith Packard Date: Wed Apr 1 17:50:47 2009 -0700 Reset cc1111 on s51 exit commit 5fcfe854d29e1862d9a6adcbef3ef5119eb52fa3 Author: Keith Packard Date: Wed Apr 1 00:06:45 2009 -0700 Add timer-based beep test commit 91607bebdd167ac632aca4b66e22cb0cabdf0d20 Author: Keith Packard Date: Thu Mar 26 22:41:47 2009 -0700 Add readline support to s51 commit 66ee94ed10e3d79b24f45a5c63e58456d4d30343 Author: Keith Packard Date: Wed Mar 25 11:37:48 2009 -0700 Deal with MSB-outputing DMA engine commit d3732fd405af03c3752a84c4b78da7ef5ebd3744 Author: Keith Packard Date: Wed Mar 25 11:14:03 2009 -0700 Flip ADC bytes around commit 50cc8e97e76d9b60c622962e1c74cf422dfb2c0f Author: Keith Packard Date: Wed Mar 25 11:01:30 2009 -0700 Add spacing for serial adc data commit 5577ca3762bfc000b0bc3782c73a8f95996a28a6 Author: Keith Packard Date: Wed Mar 25 10:58:57 2009 -0700 Inc only one on dest addr commit 378227d869a3e8787c532c8c4e1563b44002c4b5 Author: Keith Packard Date: Wed Mar 25 10:55:17 2009 -0700 Dump remaining inputs commit f54a41e37d6897db2e24fbc82880076b78a0ae41 Author: Keith Packard Date: Wed Mar 25 10:50:36 2009 -0700 Remove poll for ti demo button commit 2b93a70fdd9e47e8195855451aa19ecad5d8b068 Author: Keith Packard Date: Wed Mar 25 10:50:14 2009 -0700 Add adc to serial conversion commit d9fd548db15232e3a8823815962b252c7a5e7cba Author: Keith Packard Date: Wed Mar 25 10:04:50 2009 -0700 Add ADC via DMA example commit 61faf2b773300988fe27cfde5bc045be9950a1b0 Author: Keith Packard Date: Wed Mar 25 09:45:14 2009 -0700 Add DMA example commit 7b3fdf5b42c9be9bebc1ceb7a52ff0f5a2a28fcd Author: Keith Packard Date: Wed Mar 25 01:05:36 2009 -0700 Back to 0dBm commit 31d59b88baa2cd96dc6263d1c5877283f2cd8c36 Author: Keith Packard Date: Wed Mar 25 01:03:08 2009 -0700 Make radio test compile again commit 9ce713fdd19bf1a51370dacba3670504356c5c11 Author: Keith Packard Date: Wed Mar 25 01:02:07 2009 -0700 Wait for xtal to stabilize commit ffd43886dc902f3bb7407294018e3d62cac39480 Author: Keith Packard Date: Wed Mar 25 00:55:11 2009 -0700 Check serial input commit 029963cc94fbb47560118b5de73c537e2c14ed7c Author: Keith Packard Date: Wed Mar 25 00:50:02 2009 -0700 Eliminate array walking commit 019456a17d36f8f9f9b72cfbc980492175086d32 Author: Keith Packard Date: Wed Mar 25 00:41:49 2009 -0700 Add a per-char delay commit cfaf187e96ba98eb8dd934409a10bc70273fe68a Author: Keith Packard Date: Wed Mar 25 00:36:35 2009 -0700 Use UTX1IF to wait for serial TX complete commit 006124529b243c7657a94312d2c868a82878d8bb Author: Keith Packard Date: Wed Mar 25 00:29:29 2009 -0700 Send more interesting text commit 5049acd3d1ae42304513f667f55a2ddffa4c685a Author: Keith Packard Date: Wed Mar 25 00:24:56 2009 -0700 More random serial bit frobbing commit 50bdc2407c674a4770912d3a626f36820a7f1527 Author: Keith Packard Date: Wed Mar 25 00:13:15 2009 -0700 Flip serial TX code around a bit commit 7b7617e376afe0df1d505375b76198358330370c Author: Keith Packard Date: Wed Mar 25 00:09:47 2009 -0700 Try serial polarity high/high commit 18edacdb1e6e429cc29a164e22ef2a566096b9d9 Author: Keith Packard Date: Wed Mar 25 00:06:32 2009 -0700 Make serial test simpler commit 62744c186792739c3bf5798c80ff87c69fbe2b65 Author: Keith Packard Date: Wed Mar 25 00:03:45 2009 -0700 Flip start/stop bits around commit 9e96107d5d1a9681b07c36bb5860c748bfe10ec0 Author: Keith Packard Date: Tue Mar 24 23:57:12 2009 -0700 Stop high commit c41ceb9a488b2209d1d3c09967d1473ce608030f Author: Keith Packard Date: Tue Mar 24 23:24:01 2009 -0700 Change radio to -30dBm commit c35de083ca3d4f362063b056a0fd74ffe629d168 Author: Keith Packard Date: Tue Mar 24 23:11:48 2009 -0700 Add serial test program commit 8ecbd8734f0fb5588b2a8eb20720cfc6f43dfb47 Author: Keith Packard Date: Tue Mar 24 22:37:38 2009 -0700 Wait for xtal to stabilize after changing to 24MHz commit e120269fc0f8e14ddf1755337b1d092173e16da2 Author: Keith Packard Date: Tue Mar 24 22:21:31 2009 -0700 Actually return byte read from SPI commit de1ac6f99a1526fa840a52cfc10fa3edc0589bed Author: Keith Packard Date: Tue Mar 24 22:12:51 2009 -0700 Clear UxCSR_TX_BYTE after transmitting a byte commit 3ed3ff63e46767a256d30c5da5c52ae20089a91d Author: Keith Packard Date: Tue Mar 24 20:04:58 2009 -0700 Led the LED turn on commit 91b3a6ae74184692f45702587c4d678b2799ad8c Author: Keith Packard Date: Tue Mar 24 19:55:04 2009 -0700 actually write and compare SPI test bits commit 7de3a43887485c3c6cf52960376ccde33fb33985 Author: Keith Packard Date: Tue Mar 24 19:54:02 2009 -0700 Add USART-based SPI test code commit ef0eef68280e9b6ca5e3bb71062e23054340e1ed Author: Keith Packard Date: Tue Mar 24 17:22:36 2009 -0700 Change spi test string commit 8131389ee5018c05b721146a98367150cf500fdf Author: Keith Packard Date: Tue Mar 24 17:15:09 2009 -0700 Oops, not merging in the bit read for SPI test commit 3429016d1359ec650993d2fb0596184e3f717871 Author: Keith Packard Date: Tue Mar 24 17:04:45 2009 -0700 Adjust clock/data phase for spi test commit fedd18b28ea54e1dabcd2f9e8cab3ae4ee0fd070 Author: Keith Packard Date: Tue Mar 24 16:35:13 2009 -0700 MISO needs to be an input commit f0c233f25a208a636833312b1766825815735304 Author: Keith Packard Date: Tue Mar 24 15:41:55 2009 -0700 Add bit-banging spi eeprom test program commit 6eeee64cf16ccc9218dbdde5426f25bda5e3407f Author: Bdale Garbee Date: Wed Mar 18 02:58:33 2009 -0600 working beep at around 4khz commit 4726317de811c20e8d6754762437b5c9cbb3a48c Author: Keith Packard Date: Wed Mar 18 01:54:34 2009 -0700 Add simple test program to light up the transmitter at 434.550MHz This starts a transmit sequence, but doesn't send any data so the transmitter just locks on. commit a0a27600ee2bf237e74eb83767a8d2e7c91df24f Author: Keith Packard Date: Sun Mar 15 18:14:21 2009 -0700 Correctly comment which bit the beep program uses commit 25b77d236c01258abfc03114c2fc9ea2d69ca6e7 Author: Keith Packard Date: Sun Mar 15 18:11:53 2009 -0700 Add telemetrum beeper example commit 164b4e4749ad64ebbe26e84fd7b4fa1aa733dbe4 Author: Keith Packard Date: Sun Mar 15 18:11:20 2009 -0700 sdcc gets the lib path correct based on the model commit 04a316133af93b79bfbebb91f05eec1015ec2abc Author: Keith Packard Date: Sun Mar 15 18:10:43 2009 -0700 Bump debug speed back up commit 9fd63972758d6d5572f7bcaadec9b1c0e974a2e8 Author: Keith Packard Date: Sat Mar 7 21:05:40 2009 -0800 Only flip changing bits in async mode commit c8fd04e154bcfd65ae1200980bd8163caabd7fe4 Author: Keith Packard Date: Sat Mar 7 21:05:06 2009 -0800 The debug port only works if reset is higher than clock. weird commit ade11f88754b4ab0386ebf86afc5257e59238f62 Author: Keith Packard Date: Sat Mar 7 21:04:38 2009 -0800 Make manual bit flipping sync after every transaction commit e63b5271bb54afc36e4b9891e51e053ff6011092 Author: Keith Packard Date: Sat Mar 7 14:49:22 2009 -0800 Add ccmanual commit 77d754afc2d14aaa4413c13ebe3777ef385f62a9 Author: Keith Packard Date: Sat Mar 7 14:48:49 2009 -0800 Sync after manual bit reading commit 5a338c8a7394d003355f96a8777b6fe83bb8493c Author: Keith Packard Date: Sat Mar 7 14:48:35 2009 -0800 Flip debug pins around to match telemetrum commit cc0495b7028f4b1189a00707d828a68534d1dea2 Author: Keith Packard Date: Fri Mar 6 22:52:35 2009 -0800 Wait for a while when switching the RESET_N line The cc1111 manual suggests placing a 2.7kΩ resister and 1nF capacitor on the RESET_N line to filter out noise. This increases the time necessary to reset the chip to several microseconds which is longer than the interval between two USB packets. Flush the USB packet queue and sleep for a while after changing the value on the RESET_N line to make sure the chip sees the state change. Signed-off-by: Keith Packard commit 41289e6d8f1767547a33fea349866e928e44910f Author: Bdale Garbee Date: Mon Mar 2 07:46:20 2009 -0700 minor s51.1 formatting fixes Signed-off-by: Keith Packard commit fdee231ed097a4348aee78fbd4aa92826b80de03 Author: Keith Packard Date: Sun Mar 1 23:12:31 2009 -0800 Add s51 manual. This documents (briefly) the s51 hex debugging interface program, including some simple commands to test the operation of the system interactively. Signed-off-by: Keith Packard commit f7d91bd23b8214e09deae0aafb516331e934c49b Author: Keith Packard Date: Sun Mar 1 18:43:03 2009 -0800 Sometimes the link breaks and the GET_PC command returns garbage commit 3cc8d11eb8d5d0b42141dd84a58d461287f59e3a Author: Keith Packard Date: Sun Jan 25 08:38:48 2009 -0800 Support 'set' command The 'set' command modifies target memory and registers Signed-off-by: Keith Packard commit 60940b4be23962db79b8e914ec943d0636dd68ad Author: Keith Packard Date: Mon Jan 5 21:45:21 2009 -0800 Expose ccdbg_set_clock API This allows applications to change the debug port clock rate on the fly. Signed-off-by: Keith Packard commit eb09e61b0682eb2aeac8e1a34d58b897ba6db8e7 Author: Keith Packard Date: Mon Jan 5 21:44:44 2009 -0800 Use custom sdcc libraries (this needs to be configured...) Signed-off-by: Keith Packard commit 1ccfe0887c794397131ab1c986c25f66eea86a6c Author: Keith Packard Date: Mon Jan 5 21:43:44 2009 -0800 Have S51 ignore SIGINT while running under sdcdb. This prevents keyboard interrupts from accidentally stopping s51. Signed-off-by: Keith Packard commit 7c03937b36aac82b08f4ea0c6da33a994fe15ec7 Author: Keith Packard Date: Tue Dec 30 22:40:13 2008 -0800 Add simple and timer sample programs Signed-off-by: Keith Packard commit 6c2a65c743a4ffae96ed27dbc38c1bf9242ed1df Author: Keith Packard Date: Tue Dec 30 22:35:53 2008 -0800 Save/restore registers to host during memory operations. Cache ROM data. Because the debug port uses instructions for most operations, the debug code will clobber registers used by the running program. Save and restore these to avoid corrupting application data. If the ROM file is known, use that to return data instead of fetching it from the target to improve performance. Signed-off-by: Keith Packard commit ea366058aa467a8a7caf17e7014758f3741ea7f7 Author: Keith Packard Date: Mon Dec 29 12:35:11 2008 -0800 Fix flashing less than a full page of data. Verify page at a time. The 8051 flashing code requires special help with counts with non-zero low byte. Also, instead of verifying the entire flash contents at the end, verify each page as it goes. Signed-off-by: Keith Packard commit e0697186a2f9b6139636ff5d5c162879c85caf9c Author: Keith Packard Date: Sun Dec 28 00:11:13 2008 -0800 Use SFR access funcs. Support 'dump' command. Add -m (monitor) flag. Not all SFRs are visible in the unified address space, so the SFR-specific accessors are required. The dump command is the same as the various 'd*' commands, but also supports dumping program memory. The new -m (monitor) flag watches the command stream between s51 and sdcdb. Signed-off-by: Keith Packard commit 23aca1fcbc169184e32d4ec19f28dd4fd4cfda36 Author: Keith Packard Date: Sun Dec 28 00:09:30 2008 -0800 Save/restore regs when reading/writing memory. Add SFR access. The DPL and ACC registers are used by the memory access code, so they need to be saved and restored. Stuff them up high in ram for now; this should probably be fixed to pull them back to the host instead. Special SFR access is required as not all SFRs are visible in the unified address space. Signed-off-by: Keith Packard commit 1405838160b69e2cda456e21502a1d03b3aa7548 Author: Keith Packard Date: Sat Dec 27 11:25:58 2008 -0800 s51: get start address from ihx file. re-enable breakpoints after reset. Use the start of the ihx file when asked to run from 0x0, this lets sdcdb run programs from ram. The reset command clears all hw breakpoints, so reset them afterwards. Signed-off-by: Keith Packard commit 1264c3676e95427bba5d01e05c303d036a7f9eca Author: Keith Packard Date: Fri Dec 26 23:05:04 2008 -0800 Switch to libusb-1.0 and use async interface. The async libusb interface offers substantial performance benefits by not making each command wait for the reply. This makes talking over this interface almost reasonable. Signed-off-by: Keith Packard commit d2d9cfd74fd66836c913c02276e09136d83b35dc Author: Keith Packard Date: Fri Dec 26 17:58:48 2008 -0800 s51: add breakpoints and the ability to block awaiting a breakpoint. Signed-off-by: Keith Packard commit 4c4093c3fdd309123fdd068c0e1ff4947104492d Author: Keith Packard Date: Mon Dec 22 19:11:56 2008 -0800 Add more commands to s51 assembly-language debugger Signed-off-by: Keith Packard commit 55eba4fa08b022197106245d36a70f575a070b0a Author: Keith Packard Date: Mon Dec 22 19:10:27 2008 -0800 Make read_memory debug output use ccdbg_debug. This makes it default to not being presented, which makes s51 much happier Signed-off-by: Keith Packard commit e75918f3667a5c8ad294bec4acef6fe81682edf6 Author: Keith Packard Date: Sun Dec 21 23:33:35 2008 -0800 Add preliminary version of s51, a UI clone of the 8051 emulator. sdcdb provides source-level debugging using the 8051 emulator, s51. By emulating that emulator a the UI level, we should be able to get source debugging right on our target platform. This is just the preliminary structure for the program with most commands not yet implemented. commit f7d49868aeae80d515b12a7e339628f1296754a6 Author: Keith Packard Date: Sat Dec 20 23:30:06 2008 -0800 Cleanup work; separating out the cp interface to be more abstract. Signed-off-by: Keith Packard commit 30f23f23a6db3d12fdc9c088cf6ab47c5e5077fb Author: Keith Packard Date: Fri Dec 19 21:13:04 2008 -0800 Clean up autotools stuff. Signed-off-by: Keith Packard commit 9025eb792861930e6af918d2727c4f5d97a69936 Author: Keith Packard Date: Fri Dec 19 21:11:45 2008 -0800 Autotools. Signed-off-by: Keith Packard commit ab909db28307cfbf7ee8d692506bb79d7ffd627a Author: Keith Packard Date: Fri Dec 19 19:08:13 2008 -0800 Ignore .ihx files commit cc8db276bc4f2fd7eb00168a5c0689a8457a5c6f Author: Keith Packard Date: Fri Dec 19 19:07:37 2008 -0800 Move blink example to subdir Signed-off-by: Keith Packard commit 82e2d7ebed6682062dc400478c736bd6c91195c9 Author: Keith Packard Date: Fri Dec 19 19:04:26 2008 -0800 Clean up makefiles, move ihx files to .ihx commit 52fb5f795adfd7f62e5b6dbe65877d14361cfdae Author: Keith Packard Date: Fri Dec 19 14:39:57 2008 -0800 ignore more stuff commit 4ecfc33f16aa36b315519e6f279da65374b67aba Author: Keith Packard Date: Fri Dec 19 14:37:53 2008 -0800 Add cc1111 isr stub example commit d32e6658c3e489b62ba3cf6d22e3ab177b9b8a3a Author: Keith Packard Date: Fri Dec 19 14:37:29 2008 -0800 Add blink-tiny flash and ram versions commit b4d1127ef007843c643b778b3b2f6b915b1d5d9a Author: Keith Packard Date: Fri Dec 19 14:19:29 2008 -0800 Flash multiple pages. Eliminate off-by-one error in hex_image length. Signed-off-by: Keith Packard commit 55995515b9d4fc1e193039eab697c5d03db417c2 Author: Keith Packard Date: Fri Dec 19 11:04:16 2008 -0800 Add flash writing code. Signed-off-by: Keith Packard commit 0bc52385b8f86f9ca1c450ad106e6d8afe3bc153 Author: Keith Packard Date: Thu Dec 18 12:37:32 2008 -0800 faster Signed-off-by: Keith Packard commit 3779cc8b32cac3640f42bd0400d4199ddae965a1 Author: Keith Packard Date: Thu Dec 18 12:17:41 2008 -0800 cq Signed-off-by: Keith Packard commit dc03adc179669d41e3551d74b3c5a60db41ff217 Author: Keith Packard Date: Thu Dec 18 12:07:06 2008 -0800 Add ability to load Intel HEX files. Add sample sdcc LED blinker. Signed-off-by: Keith Packard commit 807e2adacb025af77bb53c03209e9c8e0d7a5f95 Author: Keith Packard Date: Thu Dec 18 00:18:50 2008 -0800 Add ability to read/write arbitrary memory. Write LED blinker program. Signed-off-by: Keith Packard commit 8c879bf51c14a5928135d59211facd72f6a32808 Author: Keith Packard Date: Wed Dec 17 23:15:47 2008 -0800 Move manual bit-banging debug code to separate file Signed-off-by: Keith Packard commit aec3bbce84a5ceb92060a4b3889379f2af2404ac Author: Keith Packard Date: Wed Dec 17 23:15:19 2008 -0800 reduce clock to 50us Signed-off-by: Keith Packard commit fa168f963f8b00144d12aa2770e9c0917cfae123 Author: Keith Packard Date: Wed Dec 17 23:12:59 2008 -0800 Fill out ccdbg-command to support all debug commands. Signed-off-by: Keith Packard commit 5df84df7cd6a31527dcfd11030f00ef9d8abf170 Author: Keith Packard Date: Wed Dec 17 22:24:59 2008 -0800 Clean up bitbanging layer. Add debug printfs. Signed-off-by: Keith Packard commit 584e28bac8af38de433767e017977ed1adddeb36 Author: Keith Packard Date: Wed Dec 17 12:32:15 2008 -0800 Clean up sample debug files Signed-off-by: Keith Packard commit e64b4dbf15e9ee1cb0de002985de7575e83d46e9 Author: Keith Packard Date: Mon Dec 8 17:25:28 2008 -0800 Add support for input-only lines (-) commit 4f38974a9941cddaba27c17c5a46f923db386c94 Author: Keith Packard Date: Sat Dec 6 16:32:27 2008 -0800 Add another example commit 3709ec3205cfb152b6568f3ea505c67fe7504c2a Author: Keith Packard Date: Sat Dec 6 16:32:12 2008 -0800 Add libusb support and lots more examples commit 39801e6e9fb9388072ee414a447f74095a6ac960 Author: Keith Packard Date: Fri Nov 28 22:57:07 2008 -0800 Random hacking commit 01cb2799875e086ee6096627c058ee235bbc33d5 Author: Keith Packard Date: Thu Nov 27 17:07:15 2008 -0800 Add prototypes, add stub mainline, add .gitignore commit 0ffe4ef870b0e564789a1990aeab5b6651868e5b Author: Keith Packard Date: Thu Nov 27 12:33:40 2008 -0800 cc1111 debug port access through cp2103 serial chip