1 # Copyright (c) 2009-2012 Zmanda, Inc. All Rights Reserved.
3 # This program is free software; you can redistribute it and/or modify it
4 # under the terms of the GNU General Public License version 2 as published
5 # by the Free Software Foundation.
7 # This program is distributed in the hope that it will be useful, but
8 # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
9 # or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 # You should have received a copy of the GNU General Public License along
13 # with this program; if not, write to the Free Software Foundation, Inc.,
14 # 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
16 # Contact information: Zmanda Inc, 465 S. Mathilda Ave., Suite 300
17 # Sunnyvale, CA 94086, USA, or: http://www.zmanda.com
19 use Test::More tests => 24;
23 use lib "@amperldir@";
24 use Installcheck::Config;
25 use Installcheck::Run qw(run run_err run_get load_vtape vtape_dir);
26 use Amanda::Device qw( :constants );
27 use Amanda::Config qw( :init :getconf );
30 use Amanda::Constants;
35 Amanda::Debug::dbopen("installcheck");
36 Installcheck::log_test_output();
38 $testconf = Installcheck::Run::setup(1, 4);
39 $testconf->add_param('autolabel', '"TESTCONF%%" any');
42 config_init($CONFIG_INIT_EXPLICIT_NAME, "TESTCONF");
43 my ($cfgerr_level, @cfgerr_errors) = config_errors();
44 if ($cfgerr_level >= $CFGERR_WARNINGS) {
45 config_print_errors();
46 BAIL_OUT("config errors");
49 # label slot 2 with "MyTape", slot 3 with "TESTCONF13", and add
50 # the latter to the tapelist
53 $devdir = load_vtape(2);
54 $dev = Amanda::Device->new("file:$devdir");
55 ($dev && $dev->status == $DEVICE_STATUS_SUCCESS)
56 or BAIL_OUT("device error");
58 $dev->start($ACCESS_WRITE, "MyTape", undef)
59 or BAIL_OUT("device error");
61 or BAIL_OUT("device error");
63 my $tlf = Amanda::Config::config_dir_relative(getconf($CNF_TAPELIST));
64 my $tl = Amanda::Tapelist->new($tlf, 1);
65 $tl->add_tapelabel("0", "TESTCONF13", "test tape");
68 like(run_err('amlabel'),
70 "bare 'amlabel' gives usage message");
72 like(run_get('amlabel', '--version'),
73 qr/^amlabel-\Q$Amanda::Constants::VERSION\E/,
74 "'amlabel --version' gives version");
76 like(run_get('amlabel', 'TESTCONF', 'TESTCONF92'),
77 qr/Writing label 'TESTCONF92'/,
78 "amlabel labels the current slot by default");
81 is_deeply($tl->{'tles'}->[0], {
88 'label' => 'TESTCONF92',
91 "tapelist correctly updated");
93 $devdir = load_vtape(1);
94 $dev = Amanda::Device->new("file:$devdir");
95 die "read_label failed" unless $dev->read_label() == $DEVICE_STATUS_SUCCESS;
96 is($dev->volume_label, "TESTCONF92", "volume is actually labeled");
98 ok(!run('amlabel', 'TESTCONF', 'TESTCONF93'),
99 "amlabel refuses to re-label a labeled volume");
100 like($Installcheck::Run::stdout,
101 qr/Volume with label 'TESTCONF92' is active and contains data from this configuration/,
102 "with correct message");
104 ok(!run('amlabel', 'TESTCONF', 'SomeTape'),
105 "amlabel refuses to write a non-matching label");
106 like($Installcheck::Run::stderr,
107 qr/Label 'SomeTape' doesn't match labelstr '.*'/,
108 "with correct message on stderr");
110 ok(!run('amlabel', '-f', 'TESTCONF', 'SomeTape'),
111 "amlabel will not write a non-matching label even with -f");
113 ok(!run('amlabel', 'TESTCONF', 'TESTCONF13', 'slot', '3'),
114 "amlabel refuses to write a label already in the tapelist (and recognizes 'slot xx')");
115 like($Installcheck::Run::stderr,
116 qr/Label 'TESTCONF13' already on a volume/,
117 "with correct message on stderr");
119 ok(run('amlabel', '-f', 'TESTCONF', 'TESTCONF13', 'slot', '3'),
120 "amlabel will write a label already in the tapelist with -f");
121 like($Installcheck::Run::stdout,
122 qr/Writing label 'TESTCONF13'/,
123 "with correct message on stdout");
125 ok(!run('amlabel', 'TESTCONF', 'TESTCONF88', 'slot', '2'),
126 "amlabel refuses to overwrite a non-matching label");
127 like($Installcheck::Run::stdout,
128 qr/Found label 'MyTape', but it is not from configuration 'TESTCONF'\./,
129 "with correct message on stdout");
131 ok(run('amlabel', '-f', 'TESTCONF', 'TESTCONF88', 'slot', '2'),
132 "amlabel will overwrite a non-matching label with -f");
133 like($Installcheck::Run::stdout,
134 qr/Found label 'MyTape', but it is not from configuration 'TESTCONF'\.
135 Writing label 'TESTCONF88'/,
136 "with correct message on stdout");
138 ok(run('amlabel', 'TESTCONF', 'TESTCONF88', '-f', 'slot', '2'),
139 "-f option doesn't have to follow 'amlabel'");
141 ok(run('amlabel', 'TESTCONF', 'TESTCONF88', '--meta', 'meta-01', '--barcode', 'bar-01', '--assign'),
145 is_deeply($tl->{'tles'}->[0], {
147 'barcode' => 'bar-01',
149 'blocksize' => undef,
152 'label' => 'TESTCONF88',
155 "tapelist correctly updated after --assign");
157 ok(run('amlabel', 'TESTCONF', 'slot', '4'),
158 "amlabel works without a label");
159 like($Installcheck::Run::stdout,
160 qr/Reading label\.\.\.
161 Found an empty tape\.
162 Writing label 'TESTCONF01'\.\.\.
165 "amlabel without label use autolabel");
168 is_deeply($tl->{'tles'}->[0], {
175 'label' => 'TESTCONF01',
178 "tapelist correctly updated after autolabel");