1 Changes in release 2.5.1p3
3 * amrecover improve handling of not ascii filename in index.
4 * Works with tar-1.16 and exit status of 1.
5 * Can define a LASTSLOT in a chg-disk config file.
7 Changes in release 2.5.1p2
10 * amoverview is working
11 * dumptype starttime is working
13 * Amanda command changes
14 o amtape accept the -o arguments
15 o amgetconf --list to list all tapetype, dumptype, holdingdisk
17 o amgetconf can return a value of a specific tapetype, dumptype,
18 holdingdisk or interface
21 Changes in release 2.5.1p1
24 o Timeout waiting for ACK
25 o "illegal density" with dump
26 o IRIX: Parse config file, amrecover
28 o amrecover with FreeBSD/OpenBSD
29 * Some other small cleanup.
33 Changes in release 2.5.1
35 * Defects found by Coverity scan and Klocwork K7 analysis tools fixed.
36 * Works with GNU tar 1.15.91 - work with new gtar state file format.
37 * Open SSL encryption support
38 * Two new authentication methods: bsdtcp, bsdudp.
39 * Unlimited number of DLEs on a client with bsdtcp, rsh and ssh
40 authentication methods.
41 * Recovery process amrecover uses Secure API. amoldrecover command
42 (same syntax and functionality as amrecover command) is provided for
43 compatibility with old Amanda releases. amoldrecover command uses old
44 amidxtaped/amindexd protocol.
45 * Amanda debug files are separated into client/server/amandad and
46 are also classified based on Amanda configuration name.
48 * Amanda command changes
49 o amfetchdump -o is replaced by -O.
50 o amcheck -w option does all tests including the tape writable test.
51 Use amcheck -t -w to do only the tape writable test.
52 o -o command option to override Amanda configuration. See amanda man
54 o amgetconf command doesn't write the BUGGY message when a entry
55 is not found in the configuration file.
57 * Amanda configuration file changes
59 + amrecover_do_fsf in amanda.conf defaults to yes
60 + amrecover_check_label in amanda.conf defaults to yes
61 + usetimestamps in amanda.conf to support multiple
62 backup runs in a calendar day.
63 + holdingdisk in amanda.conf supports new values:
64 NEVER, AUTO, REQUIRED.
65 + amandad_path, client_username and ssh_keys in
66 amanda.conf for ssh/rsh authentication.
67 o New amanda client configuration file - amanda-client.conf.
68 Different client configuration file can be used for each Amanda
70 + gnutar_list-dir and amandates can be specified in
71 Amanda client configuration file - amanda-client.conf
72 o .amandahosts format changes to allow use of secure API for recovery.
73 o Amanda service entries in xinetd configuration has changed.
76 Changes in release 2.5.0p2
78 * listhost subcommand in amrecover
80 Changes in release 2.5.0p1
82 * Add the 'amtape update' command.
84 Changes in release 2.5.0
86 * Communication security/authentication: Kerberos 4/5, OpenSSH
87 * Data security: Symmetric/Assymetric encrytion algorithms (aesutil
88 and gpg encryption), Encryption can be done on server or client,
89 Custom encryption utilities can be used.
90 * Compression: Ability to add custom compression tools. This is a
91 really useful feature especially since it can specified for a DLE. You
92 can use different compression algorithm for images, binaries, ascii files
94 * Dump images spanning multiple media volumes - Dump images are no
95 longer restricted to a single media volume (tape or vtape). Data restoration
96 can be done using amrecover and amfetchdump commands.
97 * Auto tape labelling - This optional feature is good for disk backups.
99 Change in release 2.4.5p1
101 * New [--days <num>] argument to 'amadmin <conf> tape'.
102 * New amoverview -last -num0 -togo0 options.
104 Change in release 2.4.5
106 * new displayunit global option to select the unit use to display number
107 k=kilo, m=mega, g=giga, t=tera.
108 * new amoverview -skipmissed option.
110 Change in release 2.4.5b1
112 * holding disk disk use timestamped directory.
113 * autoflush flush today's dump.
114 * new bumppercent global option, this should improve bumping criteria,
115 the bumpsize is set to a fixed value which can be adequate for small
117 * bumpsize, bumppercent, bumpdays and bumpmult can be in a dumptype.
118 * calcsize support include and exclude like gnutar.
119 * new 'estimate' dumptype option to select estimate type:
120 CLIENT: estimate by the dumping program.
121 CALCSIZE: estimate by the calcsize program, a lot faster but less acurate.
122 SERVER: estimate based on statistic from previous run, take second but
123 can be wrong on the estimate size.
125 Changes in release 2.4.4p3
127 * new chg-iomega changer script.
128 * amanda will not use a tape if it's label is not in the tapelist file
129 (eg. after an amrmtape).
131 Changes in release 2.4.4p2
133 * new initial_poll_delay config in chg-zd-mtx
134 * 'amadmin find' list disk removed from the disklist.
135 * amrecover can recover a disk removed from the disklist file.
136 * amanda works with samba3.
137 * new chg-disk changer script to use with the file: driver.
138 * Kerberos 4 support integrated and functional again.
140 Changes in release 2.4.4p1
142 * amverify do not advance to next tape at the end.
143 * new amflush -b and -s options, change -f behavior.
144 * new chg-mcutil changer.
145 * amrecover_changer works with chg-multi.
146 * default driveslot for chg-zd-mtx is now 0.
147 * amplot generate color postscript by default.
148 * amplot -b flag to generate b/w postscript.
149 * rait: works with file:
150 * print a postscript label for each tape used.
152 Changes in release 2.4.4
154 * New -a option to amcheck to always send an email.
156 Changes in release 2.4.4b1
158 * maxpromoteday: New option for a dumptype.
159 * New amtapetype program (replace tapetype)
160 * Client compile on CYGWIN
161 * amrestore -f <fileno> : amrestore can do fsf before reading the tape
162 * amrestore -l <label> : amrestore can check the label before restoring.
163 * New config options:
164 amrecover_do_fsf: Amrecover will use the -f flag of amrestore to position the
166 amrecover_check_label: amrecover will pass the -l flag to amrestore.
167 amrecover_changer: amrecover will use your changer.
168 maxdumpsize: The maximum size of the dumps during a run,
169 default to tapesize * runtapes
170 taperalgo: select your algo for the taper, try 'largestfit', it can improve
172 * amrecover allow to retry a skip a tape.
173 * New --days option to 'amadmin <config> balance' command.
174 * New --date option to amstatus
175 * amreport print an usage by tape.
176 * Newer promote algorithm that try to reduce the number of full on a
177 single host in a run.
178 * New changer: chg-juke, chg-null and chg-rait
180 Changes in release 2.4.3
182 * Few small bug fixed
183 * New runtapes argument to amverify.
184 * New amverifyrun program.
185 * 2.4.3 client works with older server.
187 Changes in release 2.4.3b4
189 * new noop packet type. It allow the server to know the client features.
190 * exclude list with relative path is working again.
191 * amstatus is working again.
193 Changes in release 2.4.3b3
195 * --with-maxtapeblocksize configure options
196 * blocksize tapetype option
197 * file-pad tapetype option
198 * Multiple exclude in dumptype
199 * Option include in dumptype
200 * New disklist syntax:
201 * hostname diskname [ diskdevice ] dumptype [ spindle [ interface ] ]
202 * chg-zd-mtx: Major cleanup and general overhaul.
203 * amrecover: new listdisk command.
205 Changes in release 2.4.3b2
207 * amrestore try to find the next chunk in the current directory.
208 * amrecover: You can change the tape device between each tape.
209 * amstatus work with amflush.
211 Changes in release 2.4.3b1
214 * New [host [disk]*]* arguments to amdump, amcheck, amadmin and amflush.
215 * New [-D datastamp]* arguments to amflush.
216 * amrecover: cd accept shell wildcard, new command cdx accept regex.
217 * new autoflush option.
218 * new dumperstr option to specify the priority order of each dumper.
220 Changes in release 2.4.2
222 * Samba passwords are now sent to smbclient via a pipe and never displayed.
223 * Debug files in /tmp/amanda (--with-debug-dir) are now timestamped and old
224 ones automatically cleaned out. This means more space (a few KBytes) will
225 be used since in a given run, several of the programs are called more than
226 once. But it also means important debugging information should no longer
227 be lost by the file being overwritten. The length of time to keep the
228 files is controlled by --with-debug-days (default: 4). The old flag
229 --with-pid-debug-files is no longer needed and is ignored.
230 * dumptypes can be specialized in the disklist file
231 * Amanda will never use more space than specified (use) for an holding
233 * A dump on holding disk can spread multiple holding disks
234 * negative chunksize is no longer supported
235 * chunksize is now 1 Gb by default
236 * ufsdump -S is now supported on Solaris
237 * Samba 2.0.0 is now supported
238 * New `incronly' strategy, similar to skip-full, but allows manual
239 scheduling of full backups
240 * chg-scsi was ported to several platforms
241 * --with-amandahosts is now enabled by default
242 * new force-bump, force-no-bump and unforce-bump command in amadmin.
243 * Increased the maximum number of filesystems that can be backed up
244 from a single host, by increasing the maximum UDP request packet
246 * A new `dtimeout' keyword in amanda.conf to replace the READ_TIMEOUT
247 constant in dumper.c.
248 * A new `ctimeout' keyword in amanda.conf to replace the CHECK_TIMEOUT
249 constant in amcheck.c.
250 * new amtrmlog command
251 * --with-samba-user is deprecated, the username go in the amandapass file
253 Changes in release 2.4.1
255 * FAQ for new users, in docs/FAQ.
256 * A new `runspercycle' keyword in amanda.conf to specify the number
257 of amdump runs in a dumpcycle. The default is one run every day.
258 A value of 0 (the default) means the same value as dumpcycle.
259 A value of -1 means guess the number of runs from the tapelist file,
260 which is the number of tape used in the last dumpcycle days / runtapes.
261 If you don't run amdump every days, you must set runspercycle
262 otherwise amanda will noy be able to balance the dump. You must
263 set runspercycle to -1 if you want the same behavior as previous
265 * Space to be use as holding disk can now be "use all space except ??? Kb"
266 using a negative value for the 'use' parameter.
267 * amrecover will restore SAMBA backups using SAMBA.
268 * New `amstatus' program.
269 * New `chg-scsi' tape changer program, that replaces `chg-chio' and uses
270 tape-changer-related ioctls on OSs that support them.
271 * Reporter can now print tape labels.
272 * ZFTAPEs are now supported on Linux.
273 * amrestore now accepts a list of filesystems to be restored.
274 * New `clean' amtape command.
275 * amlabel will only overwrite an Amanda tape if `-f' is specified.
276 * Tapes can now be marked so as not to be recycled with amadmin no-reuse.
277 * amidxtrm will no longer remove index files of backups in active tapes.
278 * Large dumps can now be split into multiple files on holding disk
279 (but they won't span across tapes yet).
280 * A total estimate time-out may be specified.
281 * Fixed skip-incr and skip-full support.
282 * amcheck now accepts -Maddress to send e-mail to the specified address.
283 * amdump, amflush and amcheck will use the log files as locks, so as
284 to avoid running concurrently.
285 * driver now supports configurable level-0 dumps in degraded mode via
286 new amanda.conf keyword "reserve"; see docs/WHATS.NEW for details.
287 * Configure now looks for vxdump and vxrestore in /usr/lib/fs/vxfs for Solaris
288 systems and will use it vxdump/vxrestore automatically on vxfs filesystems.
289 * New `killpgrp' setuid-root program, that kills estimate dumps even
290 if they are setuid-root.
292 Changes in release 2.4.0p1
294 * Fixed kerberos encryption
295 * New --with-owner configure option, to specify owner of installed files
296 * amcheck now checks for the existence of gnutar-listdir and of a
297 compressor on the server (for indexes and server compression)
298 * Implemented dumptype option `strategy skip'
299 * Updated to libtool 1.2a
300 * Minor portability-related bugfixes.
302 Changes in release 2.4.0
304 * Several security-related fixes, see docs/SECURITY for details.
305 * New configuration file syntax: dumptypes can now be used as keywords.
306 * New text database format, to replace dbm/ndbm/gdbm/db databases with
307 a more portable and user-friendly format.
308 * Index files are now sent through a separate TCP connection, as they
309 are generated, instead of being stored in /tmp. This breaks Amanda
310 protocol backward compatibility.
311 * Estimates are now performed concurrently, if maxdumps>1.
312 * At configure time, it is now possible to specify a suffix for amanda
313 service names (--with-testing=suffix) and a directory for debugging
314 files (--with-debugging=/directory/name)
315 * New tape changer configuration keywords, that partially standardize
316 tape changer script configuration interface.
317 * amrecover can now handle GNU tar and AIX dump restores; it must now
319 * Shared libraries are built by default, using GNU libtool.
320 * Extended regular expression syntax has been adopted.
321 * amcheck will no longer report failures about unused programs.
322 * It is now possible to specify a SAMBA username at configure time.
323 * BSD security is now enabled by default.
324 * A time-out for estimate requests can now be specified in amanda.conf.
325 * New patch-system script, for editing /etc/services and /etc/inetd.conf.
326 * Amdump will wait if a file named `hold' exists in the log directory.
327 * Various bugfixes and new ports.
329 Changes in release 2.3.0.4
330 * New chg-generic.conf option 'multieject' added which lets
331 chg-generic work on tape drives that need multiple 'mt offline'
332 commands. See examples/chg-generic.conf for more information.
333 * New configure options:
334 --with-db=DBLIB Force database library choice from {db,dbm,gdbm,ndbm}
335 --enable-buffered-dump Use buffered sockets on server for faster dumps
336 --with-group=GROUPNAME Install all files into group GROUPNAME
337 * Include the file seagate-changer.c which controls
338 Seagate/Conner/Archive autoloading DAT drive on NetBSD systems.
339 * Add a new amanda.conf option named "starttime" which is used in the
340 dumptype configuration. It takes one argument which is a time of day
341 (local timezone) formated as either hhmm or hmm (no `.'s, no `:'s,
342 just an integer). This tells Amanda to start a particular dump at
344 * Index files are now retrieved from the clients through amandad, not rsh/rcp.
345 * Fix configure bug when multiple invocations would not do the correct things.
346 * Better fully qualified domain name support.
347 * Many little dumper fixes.
348 * Remove C style comments from amrmtape and fix a bug when there is
349 only one tape in the tapelist.
350 * More declarations of Unix system functions for those OSes that do not
352 * Fix --with-mmap configure bug.
354 Changes in release 2.3.0.4b3
355 * Include amplot-2.2.6 which makes plots of the amdump files for performance
356 improvements. Amplot requires gnuplot and a version of awk that
357 understands command line variable assignment.
358 * Include amoverview which creates a list of each disk dumped and the level
359 and success or failure of those dumps over a complete tapecycle.
360 * Amanda now supports backups of clients in different domains. Requires
361 using the configure --with-fqdn options and fully qualified domain
362 names (FQDNs) in the disklist file.
363 * rth-changer checks all system calls for valid returns.
364 * no-changer and hp-changer use different status files and do more checking.
365 * amrestore works again with gzip compressed tapes.
366 * New setuid program rundump for systems where dump must run as root.
367 * Setuid programs are now installed o-rwx for tighter security.
368 * Fix bug where if Amanda was not configured using the --with-bsd-security
369 configure option, Amanda would not connect to the client machines. This
371 * Rundump and runtar now check if the proper user is invoking them.
372 * Amanda now can use gdbm if the compatibility header files are not installed.
373 * Bug fixes for gnutar file exclusions.
374 * Fix bug in sendsize which would loop forever if debugging was not turned on.
375 * Bug fixes in Samba code.
376 * More configure and bug fixes for HP-UX, m88k-motorola-sysv4, SGI, OSF, and
379 Changes in release 2.3.0.4b2
380 * New tape changer script (rth-changer) for the Robotic Tape Handling system.
381 * Include amindex-1.0 from Alan McIvor.
382 * Gnutar incrementals should now work.
383 * amgetidx now caches if a remote client is reachable.
384 * amanda.conf settings used before --with-dbdir and --with-logdir settings
386 * New configure options:
387 --with-mmap force mmap() instead of shared memory
388 --with-gnutar-listed-incremental=DIR gnutar directory lists go in DIR
389 --enable-gnutar-atime-preserve gnutar preserves atime, do not use
390 --with-pid-debug-files use pid in /tmp debugging filenames
391 * Samba support must now be explicitly included using --with-smblcient.
392 * Amanda now compiles with K&R compilers.
393 * Better AIX, Linux, OSF support.
394 * configure checks if /dev/r devices exist or not.
395 * Amanda uses POSIX fcntl locking before flock or lockf locking if available.
396 * dumper.c uses less aggressive I/O values for SunOS server support.
397 * Many bug fixes in the configure script for various platforms.
398 * Many bug fixes to codes.
400 Changes in release 2.3.0.4b1
401 * Configuration now uses configure. Build environment now uses
402 automake and autoconf.
403 * Samba PC client backup support added.
404 * New programs and scripts:
405 amrmtape: invalidate the contents of an existing backup tape
406 amverify: check Amanda tapes for gnutar driven backups.
407 hp-changer: script for a HP DAT changer.
408 no-changer: make a single tape appear like an infinite count tape stacker.
409 * New options added to programs:
410 amadmin: `amadmin <conf> version' shows version information.
411 amtape: `amtape <conf> current' shows the current tape label,
412 * Amanda now supports server side compression of dumps on the tape
413 host. Use the srvcompress option in amanda.conf.
414 * Better gnutar support for indexing. Amanda now lets you exclude
416 * Tape planning improvements.
417 * Email reports have better formating for disks with long mount points.
418 * Tighter DNS checking added to amandad.
419 * More debugging added to several programs.
420 * Amdump now calls amgetidx and amtrmidx.
421 * Better support for multidomain environments.
422 * Contains amindex-0.3 from Alan McIvor.
423 * Many bug fixes and compiler warnings handled.
425 Changes in release 2.3.0.3
426 * Amadmin uses regular expression matching to match disks.
427 * Expand the column width of the disk names from reporter.
428 * Contains amindex-0.2 from Alan McIvor.
431 Changes in release 2.3.0.2
434 Changes in release 2.3.0.1
435 * Contains amindex-0.1 from Alan McIvor.
438 Changes in release 2.3.0 alpha
439 * A number of material bugs fixed, including fixes incorporated into
440 John Stoffel's WPI patches to amanda, which he called 2.2.6.5.
441 * Backup files larger than 2 GB now supported. The current limit is
442 2^31 Kbytes (2 terabytes), which should hold us for a few more years
444 * Support for GNUTAR-based backups.
445 * Support for writing to multiple tapes (sequentially) in one run.
446 * Support for multiple backups in parallel from the same client host.
447 * Records from the curinfo database can be exported and imported
448 to/from a textual format. This allows fixing a corrupted database by
449 running the text version through a script and reimporting it.
450 Individual records or the entire database can be exported/imported.
452 Changes in release 2.2.6
453 * A number of material bugs fixed.
454 * A lot of lint picked in the whole package.
455 * The documentation is now reasonably up to date.
456 * This version has been locally compiled and at least the client side
457 tested on the following systems:
459 Solaris 2.3 BSDI BSD/386 1.1
460 Ultrix 4.2 NetBSD 1.0
461 DEC OSF/1 2.0 AIX 3.2
462 I don't have any HP/UX machines locally to try it on, but I've
463 tracked patches submitted by Neal Becker <neal@ctd.comset.com>, so
464 I'm reasonably confident that 2.2.6 shouldn't be far from the mark on
467 Changes in release 2.2.5
468 * SYSV shared memory no longer required on server side if mmap is
470 * Supports GZIP compression.
471 * Supports use of mount names as well as device names in disk list
472 (eg "/usr" instead of "sd0g").
473 * Amanda now thinks in real-time - you may run it several times a day
474 if you wish, and it won't get confused.
475 * Supports Kerberos 4 security as well as BSD-style .rhosts, including
476 encrypting files over the net. The Kerberos support is available as
477 a separate add-on package - see the file KERBEROS.HOW-TO-GET on the
479 * Improved network protocol - faster startup, no longer dump specific,
480 hooks in place for non-dump clients.
481 * Client-side checks in amcheck - can check sanity of all client hosts
483 * Supports multiple holding disks, and load balances between them.