1 Changes in release 2.6.0
3 * configure --disable-shared doesn't work because perl modules require
4 shared libraries. Use configure --with-static-binaries to build
5 statically linked binaries.
6 * 'amverify' and 'amverifyrun' are deprecated and replaced with the
7 new, more flexible 'amcheckdump'
8 * 'amdd' and 'ammt' are deprecated.
9 * Some Amanda files are now installed in new "amanda/" subdirectories:
10 libraries are now installed in $libdir/amanda and internal programs
11 are now installed in $libexecdir/amanda. You can set --with-amlibdir
12 and --with-amlibexecdir if you don't want the amanda suffix.
13 If you mix 2.6.0 and earlier version with rsh/ssh auth, you need to
14 add an 'amandad_path' to the dumptype and to amanda-client.conf
15 * The amandates file, previously at /etc/amandates, is now at
16 $localstatedir/amanda/amandates. You may want to move your existing
17 /etc/amandates when you upgrade Amanda.
18 * New 'amcryptsimple', 'amgpgcrypt' - encryption plugins based on gpg.
19 * New 'amserverconfig', 'amaddclient' - Initial Amanda configuration tools
20 these tools make assumptions, please see man page.
21 * Many bugs fixed and code rewrite/cleanup.
22 Speedup in 'amrecover find' and starting amrecover.
23 * glib is required to compile and run amanda.
24 * Device API: pluggable interface to storage devices, supporting tapes,
25 vtapes, RAIT, and Amazon S3
26 * New perl modules link directly to Amanda, to support writing Amanda
27 applications in Perl. Perl module are installed by default in the perl
28 installsitelib directory. It can be changed with
29 'configure --with-amperldir'.
30 * New 'local' security driver supports backups of the amanda server
31 without any network connection or other configuration.
32 * Almost 200 unit tests are available via 'make installcheck'.
33 * Amanda configuration file changes
35 + flush-threshold-dumped
36 + flush-threshold-scheduled
39 + usetimestamps default to yes
41 Changes in release 2.5.2p1
45 + missing sockaddr_storage
46 + missing AI_V4MAPPED and AI_ALL
47 + compare of IPv4 and IPv6 v4mapped address.
48 + (bsd/bsdudp): server use two sockets,
49 one for IPv4 and one for IPv6
53 o compilation on some platform
56 Changes in release 2.5.2
58 * Many bugs fixed and code cleanup
59 * krb5 auth is working
60 * Works with IPv6 address
61 * Amanda configuration file changes
63 + debugging is enabled in the config file
64 see all debug_* config option
65 + tapetype 'readblocksize', if maxtapeblocksize is set too
66 larger for your hardware
68 Changes in release 2.5.1p3
71 * amrecover improve handling of not ascii filename in index.
72 * Works with tar-1.16 and exit status of 1.
73 * Can define a LASTSLOT in a chg-disk config file.
76 Changes in release 2.5.1p2
79 * amoverview is working
80 * dumptype starttime is working
82 * Amanda command changes
83 o amtape accept the -o arguments
84 o amgetconf --list to list all tapetype, dumptype, holdingdisk
86 o amgetconf can return a value of a specific tapetype, dumptype,
87 holdingdisk or interface
90 Changes in release 2.5.1p1
93 o Timeout waiting for ACK
94 o "illegal density" with dump
95 o IRIX: Parse config file, amrecover
97 o amrecover with FreeBSD/OpenBSD
98 * Some other small cleanup.
102 Changes in release 2.5.1
104 * Defects found by Coverity scan and Klocwork K7 analysis tools fixed.
105 * Works with GNU tar 1.15.91 - work with new gtar state file format.
106 * Open SSL encryption support
107 * Two new authentication methods: bsdtcp, bsdudp.
108 * Unlimited number of DLEs on a client with bsdtcp, rsh and ssh
109 authentication methods.
110 * Recovery process amrecover uses Secure API. amoldrecover command
111 (same syntax and functionality as amrecover command) is provided for
112 compatibility with old Amanda releases. amoldrecover command uses old
113 amidxtaped/amindexd protocol.
114 * Amanda debug files are separated into client/server/amandad and
115 are also classified based on Amanda configuration name.
117 * Amanda command changes
118 o amfetchdump -o is replaced by -O.
119 o amcheck -w option does all tests including the tape writable test.
120 Use amcheck -t -w to do only the tape writable test.
121 o -o command option to override Amanda configuration. See amanda man
123 o amgetconf command doesn't write the BUGGY message when a entry
124 is not found in the configuration file.
126 * Amanda configuration file changes
127 o amanda.conf changes
128 + amrecover_do_fsf in amanda.conf defaults to yes
129 + amrecover_check_label in amanda.conf defaults to yes
130 + usetimestamps in amanda.conf to support multiple
131 backup runs in a calendar day.
132 + holdingdisk in amanda.conf supports new values:
133 NEVER, AUTO, REQUIRED.
134 + amandad_path, client_username and ssh_keys in
135 amanda.conf for ssh/rsh authentication.
136 o New amanda client configuration file - amanda-client.conf.
137 Different client configuration file can be used for each Amanda
139 + gnutar_list-dir and amandates can be specified in
140 Amanda client configuration file - amanda-client.conf
141 o .amandahosts format changes to allow use of secure API for recovery.
142 o Amanda service entries in xinetd configuration has changed.
145 Changes in release 2.5.0p2
147 * listhost subcommand in amrecover
149 Changes in release 2.5.0p1
151 * Add the 'amtape update' command.
153 Changes in release 2.5.0
155 * Communication security/authentication: Kerberos 4/5, OpenSSH
156 * Data security: Symmetric/Assymetric encrytion algorithms (aesutil
157 and gpg encryption), Encryption can be done on server or client,
158 Custom encryption utilities can be used.
159 * Compression: Ability to add custom compression tools. This is a
160 really useful feature especially since it can specified for a DLE. You
161 can use different compression algorithm for images, binaries, ascii files
163 * Dump images spanning multiple media volumes - Dump images are no
164 longer restricted to a single media volume (tape or vtape). Data restoration
165 can be done using amrecover and amfetchdump commands.
166 * Auto tape labelling - This optional feature is good for disk backups.
168 Change in release 2.4.5p1
170 * New [--days <num>] argument to 'amadmin <conf> tape'.
171 * New amoverview -last -num0 -togo0 options.
173 Change in release 2.4.5
175 * new displayunit global option to select the unit use to display number
176 k=kilo, m=mega, g=giga, t=tera.
177 * new amoverview -skipmissed option.
179 Change in release 2.4.5b1
181 * holding disk disk use timestamped directory.
182 * autoflush flush today's dump.
183 * new bumppercent global option, this should improve bumping criteria,
184 the bumpsize is set to a fixed value which can be adequate for small
186 * bumpsize, bumppercent, bumpdays and bumpmult can be in a dumptype.
187 * calcsize support include and exclude like gnutar.
188 * new 'estimate' dumptype option to select estimate type:
189 CLIENT: estimate by the dumping program.
190 CALCSIZE: estimate by the calcsize program, a lot faster but less acurate.
191 SERVER: estimate based on statistic from previous run, take second but
192 can be wrong on the estimate size.
194 Changes in release 2.4.4p3
196 * new chg-iomega changer script.
197 * amanda will not use a tape if it's label is not in the tapelist file
198 (eg. after an amrmtape).
200 Changes in release 2.4.4p2
202 * new initial_poll_delay config in chg-zd-mtx
203 * 'amadmin find' list disk removed from the disklist.
204 * amrecover can recover a disk removed from the disklist file.
205 * amanda works with samba3.
206 * new chg-disk changer script to use with the file: driver.
207 * Kerberos 4 support integrated and functional again.
209 Changes in release 2.4.4p1
211 * amverify do not advance to next tape at the end.
212 * new amflush -b and -s options, change -f behavior.
213 * new chg-mcutil changer.
214 * amrecover_changer works with chg-multi.
215 * default driveslot for chg-zd-mtx is now 0.
216 * amplot generate color postscript by default.
217 * amplot -b flag to generate b/w postscript.
218 * rait: works with file:
219 * print a postscript label for each tape used.
221 Changes in release 2.4.4
223 * New -a option to amcheck to always send an email.
225 Changes in release 2.4.4b1
227 * maxpromoteday: New option for a dumptype.
228 * New amtapetype program (replace tapetype)
229 * Client compile on CYGWIN
230 * amrestore -f <fileno> : amrestore can do fsf before reading the tape
231 * amrestore -l <label> : amrestore can check the label before restoring.
232 * New config options:
233 amrecover_do_fsf: Amrecover will use the -f flag of amrestore to position the
235 amrecover_check_label: amrecover will pass the -l flag to amrestore.
236 amrecover_changer: amrecover will use your changer.
237 maxdumpsize: The maximum size of the dumps during a run,
238 default to tapesize * runtapes
239 taperalgo: select your algo for the taper, try 'largestfit', it can improve
241 * amrecover allow to retry a skip a tape.
242 * New --days option to 'amadmin <config> balance' command.
243 * New --date option to amstatus
244 * amreport print an usage by tape.
245 * Newer promote algorithm that try to reduce the number of full on a
246 single host in a run.
247 * New changer: chg-juke, chg-null and chg-rait
249 Changes in release 2.4.3
251 * Few small bug fixed
252 * New runtapes argument to amverify.
253 * New amverifyrun program.
254 * 2.4.3 client works with older server.
256 Changes in release 2.4.3b4
258 * new noop packet type. It allow the server to know the client features.
259 * exclude list with relative path is working again.
260 * amstatus is working again.
262 Changes in release 2.4.3b3
264 * --with-maxtapeblocksize configure options
265 * blocksize tapetype option
266 * file-pad tapetype option
267 * Multiple exclude in dumptype
268 * Option include in dumptype
269 * New disklist syntax:
270 * hostname diskname [ diskdevice ] dumptype [ spindle [ interface ] ]
271 * chg-zd-mtx: Major cleanup and general overhaul.
272 * amrecover: new listdisk command.
274 Changes in release 2.4.3b2
276 * amrestore try to find the next chunk in the current directory.
277 * amrecover: You can change the tape device between each tape.
278 * amstatus work with amflush.
280 Changes in release 2.4.3b1
283 * New [host [disk]*]* arguments to amdump, amcheck, amadmin and amflush.
284 * New [-D datastamp]* arguments to amflush.
285 * amrecover: cd accept shell wildcard, new command cdx accept regex.
286 * new autoflush option.
287 * new dumperstr option to specify the priority order of each dumper.
289 Changes in release 2.4.2
291 * Samba passwords are now sent to smbclient via a pipe and never displayed.
292 * Debug files in /tmp/amanda (--with-debug-dir) are now timestamped and old
293 ones automatically cleaned out. This means more space (a few KBytes) will
294 be used since in a given run, several of the programs are called more than
295 once. But it also means important debugging information should no longer
296 be lost by the file being overwritten. The length of time to keep the
297 files is controlled by --with-debug-days (default: 4). The old flag
298 --with-pid-debug-files is no longer needed and is ignored.
299 * dumptypes can be specialized in the disklist file
300 * Amanda will never use more space than specified (use) for an holding
302 * A dump on holding disk can spread multiple holding disks
303 * negative chunksize is no longer supported
304 * chunksize is now 1 Gb by default
305 * ufsdump -S is now supported on Solaris
306 * Samba 2.0.0 is now supported
307 * New `incronly' strategy, similar to skip-full, but allows manual
308 scheduling of full backups
309 * chg-scsi was ported to several platforms
310 * --with-amandahosts is now enabled by default
311 * new force-bump, force-no-bump and unforce-bump command in amadmin.
312 * Increased the maximum number of filesystems that can be backed up
313 from a single host, by increasing the maximum UDP request packet
315 * A new `dtimeout' keyword in amanda.conf to replace the READ_TIMEOUT
316 constant in dumper.c.
317 * A new `ctimeout' keyword in amanda.conf to replace the CHECK_TIMEOUT
318 constant in amcheck.c.
319 * new amtrmlog command
320 * --with-samba-user is deprecated, the username go in the amandapass file
322 Changes in release 2.4.1
324 * FAQ for new users, in docs/FAQ.
325 * A new `runspercycle' keyword in amanda.conf to specify the number
326 of amdump runs in a dumpcycle. The default is one run every day.
327 A value of 0 (the default) means the same value as dumpcycle.
328 A value of -1 means guess the number of runs from the tapelist file,
329 which is the number of tape used in the last dumpcycle days / runtapes.
330 If you don't run amdump every days, you must set runspercycle
331 otherwise amanda will noy be able to balance the dump. You must
332 set runspercycle to -1 if you want the same behavior as previous
334 * Space to be use as holding disk can now be "use all space except ??? Kb"
335 using a negative value for the 'use' parameter.
336 * amrecover will restore SAMBA backups using SAMBA.
337 * New `amstatus' program.
338 * New `chg-scsi' tape changer program, that replaces `chg-chio' and uses
339 tape-changer-related ioctls on OSs that support them.
340 * Reporter can now print tape labels.
341 * ZFTAPEs are now supported on Linux.
342 * amrestore now accepts a list of filesystems to be restored.
343 * New `clean' amtape command.
344 * amlabel will only overwrite an Amanda tape if `-f' is specified.
345 * Tapes can now be marked so as not to be recycled with amadmin no-reuse.
346 * amidxtrm will no longer remove index files of backups in active tapes.
347 * Large dumps can now be split into multiple files on holding disk
348 (but they won't span across tapes yet).
349 * A total estimate time-out may be specified.
350 * Fixed skip-incr and skip-full support.
351 * amcheck now accepts -Maddress to send e-mail to the specified address.
352 * amdump, amflush and amcheck will use the log files as locks, so as
353 to avoid running concurrently.
354 * driver now supports configurable level-0 dumps in degraded mode via
355 new amanda.conf keyword "reserve"; see docs/WHATS.NEW for details.
356 * Configure now looks for vxdump and vxrestore in /usr/lib/fs/vxfs for Solaris
357 systems and will use it vxdump/vxrestore automatically on vxfs filesystems.
358 * New `killpgrp' setuid-root program, that kills estimate dumps even
359 if they are setuid-root.
361 Changes in release 2.4.0p1
363 * Fixed kerberos encryption
364 * New --with-owner configure option, to specify owner of installed files
365 * amcheck now checks for the existence of gnutar-listdir and of a
366 compressor on the server (for indexes and server compression)
367 * Implemented dumptype option `strategy skip'
368 * Updated to libtool 1.2a
369 * Minor portability-related bugfixes.
371 Changes in release 2.4.0
373 * Several security-related fixes, see docs/SECURITY for details.
374 * New configuration file syntax: dumptypes can now be used as keywords.
375 * New text database format, to replace dbm/ndbm/gdbm/db databases with
376 a more portable and user-friendly format.
377 * Index files are now sent through a separate TCP connection, as they
378 are generated, instead of being stored in /tmp. This breaks Amanda
379 protocol backward compatibility.
380 * Estimates are now performed concurrently, if maxdumps>1.
381 * At configure time, it is now possible to specify a suffix for amanda
382 service names (--with-testing=suffix) and a directory for debugging
383 files (--with-debugging=/directory/name)
384 * New tape changer configuration keywords, that partially standardize
385 tape changer script configuration interface.
386 * amrecover can now handle GNU tar and AIX dump restores; it must now
388 * Shared libraries are built by default, using GNU libtool.
389 * Extended regular expression syntax has been adopted.
390 * amcheck will no longer report failures about unused programs.
391 * It is now possible to specify a SAMBA username at configure time.
392 * BSD security is now enabled by default.
393 * A time-out for estimate requests can now be specified in amanda.conf.
394 * New patch-system script, for editing /etc/services and /etc/inetd.conf.
395 * Amdump will wait if a file named `hold' exists in the log directory.
396 * Various bugfixes and new ports.
398 Changes in release 2.3.0.4
399 * New chg-generic.conf option 'multieject' added which lets
400 chg-generic work on tape drives that need multiple 'mt offline'
401 commands. See examples/chg-generic.conf for more information.
402 * New configure options:
403 --with-db=DBLIB Force database library choice from {db,dbm,gdbm,ndbm}
404 --enable-buffered-dump Use buffered sockets on server for faster dumps
405 --with-group=GROUPNAME Install all files into group GROUPNAME
406 * Include the file seagate-changer.c which controls
407 Seagate/Conner/Archive autoloading DAT drive on NetBSD systems.
408 * Add a new amanda.conf option named "starttime" which is used in the
409 dumptype configuration. It takes one argument which is a time of day
410 (local timezone) formated as either hhmm or hmm (no `.'s, no `:'s,
411 just an integer). This tells Amanda to start a particular dump at
413 * Index files are now retrieved from the clients through amandad, not rsh/rcp.
414 * Fix configure bug when multiple invocations would not do the correct things.
415 * Better fully qualified domain name support.
416 * Many little dumper fixes.
417 * Remove C style comments from amrmtape and fix a bug when there is
418 only one tape in the tapelist.
419 * More declarations of Unix system functions for those OSes that do not
421 * Fix --with-mmap configure bug.
423 Changes in release 2.3.0.4b3
424 * Include amplot-2.2.6 which makes plots of the amdump files for performance
425 improvements. Amplot requires gnuplot and a version of awk that
426 understands command line variable assignment.
427 * Include amoverview which creates a list of each disk dumped and the level
428 and success or failure of those dumps over a complete tapecycle.
429 * Amanda now supports backups of clients in different domains. Requires
430 using the configure --with-fqdn options and fully qualified domain
431 names (FQDNs) in the disklist file.
432 * rth-changer checks all system calls for valid returns.
433 * no-changer and hp-changer use different status files and do more checking.
434 * amrestore works again with gzip compressed tapes.
435 * New setuid program rundump for systems where dump must run as root.
436 * Setuid programs are now installed o-rwx for tighter security.
437 * Fix bug where if Amanda was not configured using the --with-bsd-security
438 configure option, Amanda would not connect to the client machines. This
440 * Rundump and runtar now check if the proper user is invoking them.
441 * Amanda now can use gdbm if the compatibility header files are not installed.
442 * Bug fixes for gnutar file exclusions.
443 * Fix bug in sendsize which would loop forever if debugging was not turned on.
444 * Bug fixes in Samba code.
445 * More configure and bug fixes for HP-UX, m88k-motorola-sysv4, SGI, OSF, and
448 Changes in release 2.3.0.4b2
449 * New tape changer script (rth-changer) for the Robotic Tape Handling system.
450 * Include amindex-1.0 from Alan McIvor.
451 * Gnutar incrementals should now work.
452 * amgetidx now caches if a remote client is reachable.
453 * amanda.conf settings used before --with-dbdir and --with-logdir settings
455 * New configure options:
456 --with-mmap force mmap() instead of shared memory
457 --with-gnutar-listed-incremental=DIR gnutar directory lists go in DIR
458 --enable-gnutar-atime-preserve gnutar preserves atime, do not use
459 --with-pid-debug-files use pid in /tmp debugging filenames
460 * Samba support must now be explicitly included using --with-smblcient.
461 * Amanda now compiles with K&R compilers.
462 * Better AIX, Linux, OSF support.
463 * configure checks if /dev/r devices exist or not.
464 * Amanda uses POSIX fcntl locking before flock or lockf locking if available.
465 * dumper.c uses less aggressive I/O values for SunOS server support.
466 * Many bug fixes in the configure script for various platforms.
467 * Many bug fixes to codes.
469 Changes in release 2.3.0.4b1
470 * Configuration now uses configure. Build environment now uses
471 automake and autoconf.
472 * Samba PC client backup support added.
473 * New programs and scripts:
474 amrmtape: invalidate the contents of an existing backup tape
475 amverify: check Amanda tapes for gnutar driven backups.
476 hp-changer: script for a HP DAT changer.
477 no-changer: make a single tape appear like an infinite count tape stacker.
478 * New options added to programs:
479 amadmin: `amadmin <conf> version' shows version information.
480 amtape: `amtape <conf> current' shows the current tape label,
481 * Amanda now supports server side compression of dumps on the tape
482 host. Use the srvcompress option in amanda.conf.
483 * Better gnutar support for indexing. Amanda now lets you exclude
485 * Tape planning improvements.
486 * Email reports have better formating for disks with long mount points.
487 * Tighter DNS checking added to amandad.
488 * More debugging added to several programs.
489 * Amdump now calls amgetidx and amtrmidx.
490 * Better support for multidomain environments.
491 * Contains amindex-0.3 from Alan McIvor.
492 * Many bug fixes and compiler warnings handled.
494 Changes in release 2.3.0.3
495 * Amadmin uses regular expression matching to match disks.
496 * Expand the column width of the disk names from reporter.
497 * Contains amindex-0.2 from Alan McIvor.
500 Changes in release 2.3.0.2
503 Changes in release 2.3.0.1
504 * Contains amindex-0.1 from Alan McIvor.
507 Changes in release 2.3.0 alpha
508 * A number of material bugs fixed, including fixes incorporated into
509 John Stoffel's WPI patches to amanda, which he called 2.2.6.5.
510 * Backup files larger than 2 GB now supported. The current limit is
511 2^31 Kbytes (2 terabytes), which should hold us for a few more years
513 * Support for GNUTAR-based backups.
514 * Support for writing to multiple tapes (sequentially) in one run.
515 * Support for multiple backups in parallel from the same client host.
516 * Records from the curinfo database can be exported and imported
517 to/from a textual format. This allows fixing a corrupted database by
518 running the text version through a script and reimporting it.
519 Individual records or the entire database can be exported/imported.
521 Changes in release 2.2.6
522 * A number of material bugs fixed.
523 * A lot of lint picked in the whole package.
524 * The documentation is now reasonably up to date.
525 * This version has been locally compiled and at least the client side
526 tested on the following systems:
528 Solaris 2.3 BSDI BSD/386 1.1
529 Ultrix 4.2 NetBSD 1.0
530 DEC OSF/1 2.0 AIX 3.2
531 I don't have any HP/UX machines locally to try it on, but I've
532 tracked patches submitted by Neal Becker <neal@ctd.comset.com>, so
533 I'm reasonably confident that 2.2.6 shouldn't be far from the mark on
536 Changes in release 2.2.5
537 * SYSV shared memory no longer required on server side if mmap is
539 * Supports GZIP compression.
540 * Supports use of mount names as well as device names in disk list
541 (eg "/usr" instead of "sd0g").
542 * Amanda now thinks in real-time - you may run it several times a day
543 if you wish, and it won't get confused.
544 * Supports Kerberos 4 security as well as BSD-style .rhosts, including
545 encrypting files over the net. The Kerberos support is available as
546 a separate add-on package - see the file KERBEROS.HOW-TO-GET on the
548 * Improved network protocol - faster startup, no longer dump specific,
549 hooks in place for non-dump clients.
550 * Client-side checks in amcheck - can check sanity of all client hosts
552 * Supports multiple holding disks, and load balances between them.